I am using LOV on some field to retrieve data, but sometimes it does not retrieve anything cause of unavailability of date its fine but i want to put N/A in that field when such condition is occurring .
View 2 Replies,i have a table called travel detail from which i have retrieved few rows based on 1 condition by using LOV and on next few rows modification is allowed. The rows are getting modified but it is also allowing me to enter in next blank row and insert any data in that row.how can i retrieve only that data which is based on the given condition. Further blank rows should not b displayed.
View 2 Replies View RelatedI have a detailed block with a user ID column. The user name is not available in the block. Therefore, I have created a non-database column to retrieve the user name into it.
Here is the code I've used.
PROCEDURE get_details IS
iLoop number := 1;
CURSOR c is
SELECT FULL_NAME
FROM GRP_EMPLOYEE
WHERE EMPLOYEE_NUMBER = :USER_ID;
[Code]...
However, it retrieves the first record only.
The results are displayed like this.
Loop: Result:
1 Full_Name
2 Empty
3 Empty
4 Empty
I wanna have a form which has a list box which is including of all table names, by selecting the required table by user all column name and its related data should be retrieve.I have a cursor which give me all field names related to the table by I do not know how can I retrieve table data:
1. How to add item through block base on number of column which selected table has.
2. How to set value of table column in these mentioned column which added in the block.
3. And at the end retrieve the table data.
I'm developing a new batch program retrieve data from oracle to excel.Normally i insert those data into single sheet. Is it possible if I want do this into multiple sheet.
Eg: I need to insert data base on branch category. different sheet for different branch but still in a single workbook?
i want to retrieve records of empno from SCOTT.EMP talbe in form but without data block wizard using ..how .. and what logic will be in coding
DECLARE
TYPE EROC IS TABLE OF VARCHAR2(200) INDEX BY BINARY_INTEGER;
E1 EROC;
NO_EMPNOVARCHAR2(2000);
[code]....
just caling here EMPNO and :v_empno is fields on form...
i have a doubt in building a query.
I have a table with fields
job_no activity Date
101 anchorage 20/01/2010
102 berthing 25/01/2010
103 sailing 29/01/2010
If i want to know the status of the ship on the date '22/01/2010' It has to show as 'anchorage', becoz on '25/01/2010' only it came to berthing from anchorage. How to write a query to achieve this.
I have already done auto increment by making sequence and trigger. but now the problem is when i am trying to retrieve data from that table it returns all data perfectly but the primary key that is my auto increment value shows blank.I am facing this problem with join query, there 4 table left joined in my query. But when I remove join from my query then it shows that value.
But i need that value in my join query.So, what is the problem and what can I do?And other thing is when I apply this query in Oracle SQL Developer, it works perfect.
My Query:
return $this->db->query("select * from TBL_EMPLOYEE_BASIC left join TBL_EMPLOYEE_DETAILS on TBL_EMPLOYEE_BASIC.EMPL_ID = TBL_EMPLOYEE_DETAILS.EMPL_ID left join TBL_EMPLOYEE_EDUCATION on TBL_EMPLOYEE_BASIC.EMPL_ID = TBL_EMPLOYEE_EDUCATION.EMPL_ID left join TBL_EMPLOYEE_EXPERIENCE on TBL_EMPLOYEE_BASIC.EMPL_ID = TBL_EMPLOYEE_EXPERIENCE.EMPL_ID where
[code]...
Is there a way to apply changes to a data field on oracle forms for specific users?
For example, I have an oracle form that applies the below masking code for a certain field called CUSTOMER_ID
IF :SYSTEM.BLOCK_STATUS = 'QUERY' THEN
SET_ITEM_PROPERTY('CUSTOMER_ID',CONCEAL_DATA,PROPERTY_TRUE);
ELSE
SET_ITEM_PROPERTY('CUSTOMER_ID',CONCEAL_DATA,PROPERTY_FALSE);
END IF;
But I only want this masking to be applicable to CERTAIN users. For example, the psuedo code would be like
IF :SYSTEM.BLOCK_STATUS = 'QUERY' and USERS_LIST = 'SUPERVISORS' THEN
SET_ITEM_PROPERTY('CUSTOMER_ID',CONCEAL_DATA,PROPERTY_TRUE);
Note that this users_list is a group of oracle database users, so I am a member of this group. Also note that this form is applied via the web via the application server.
I currently have a field in which the user inputs a number, but before this number is allowed to be saved to the database it has to be checked to see if the number is already stored in a different field within the database. For example, if the number is not in the database the user cannot put that number into the field.
I do want it to be user input so I don't want a LOV linked to the appropriate field in the database.
Is below anyway close to the way it should be done? For some reason seq_rec.seq seems to give me 3 and doesn't seem to compare it with each of the values in the database.
DECLARE
cursor seq_curs IS SELECT SEQ FROM ZZJOB;
seq_rec seq_curs%rowtype;
none_existing_seq EXCEPTION;
invalid_seq EXCEPTION;
return_alert NUMBER;
[code]....
Just say the field in my database has numbers: 1 2 3 4 and 5 in the field that i allow the user to input data they can only enter 1 2 3 4 or 5. Hence the check needs to be made with te database field to check if the input number is already in the database.
P.S. they are separate fields for different things, the numbers just need to be in one field before they can be added in the other.
I have got data in a table like
ID Service
1 A
1 B
1 C
I have written a cursor which is fetching it like A,B,C and assigning it in a display field.
It is working fine.
I want to display it in single text field but in multiple lines.i have set the property multiline to yes in property insepector.
I want to display it like
A
B
C
but it should remain in single field/text box. Infact i am unable to break the line in cursor.
I have a table where i need to update one field values based on another field of the same table , simply as it is.I have done this using one select all check box , on clicking that all check boxes of item_trans table will get selected , then i will un select some of check box and then using one button, i will update the value of the fields which are checked only.
I have put the sample code but when i am updating its taking long time and hanging.I am also attaching the form based on the test case provided.
--tables with insert statement
create table item_trans (trans_item varchar2(12),trans_qty number,trans_act_qty number)
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE1',40,NULL);
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE2',20,NULL);
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE3',20,NULL);
--i want to set the value of trans_Act_qty as trans_qty
--i create one dummy or test block to keep the select all check box. for that table test script is
CREATE TABLE TEST
(
C VARCHAR2(2000 BYTE),
B NUMBER,
A NUMBER
);
insert into test (C,B,A) values ('A',1,1);
--code written in select all check box which is created on test.block.
BEGIN
GO_BLOCK('item_trans');
FIRST_RECORD;
LOOP
:M_END_YN := :M_END_ALL;
[code].......
--code written in M_END_YN ( actual check boxes where i will uncheck).
IF :M_END_YN = 'N' THEN
:M_END_ALL := 'N';
END IF;
--code written on button to update those values which are checked.
BEGIN
GO_BLOCK('item_trans');
FIRST_RECORD;
LOOP
IF :M_END_YN = 'Y' THEN
[code]......
SELECT mkct_group_code FROM ID_MKT_CONTTYPE_GROUP_MASTER where mkct_group_code=20'
Note mkct_group_code column is varchar2(10) type.
It has values as
20
10
30
20'
30'
I am writing a SQL inside an application to retrieve data from a table for certain IDs or for All employees based on the user's input. I create a variable :SELECTION for the where clause. When I run the SQL, I receive the error of missing right parenthesis. There is no error if I hard code the IDs.
If the input is 'All' -> the variable :SELECTION is blank so if the SQL :
select name, address, ID from employee :SELECTION
will be
select name, address, ID from employee
If the input of users ID as '1234','9999' - > the :SELECTION = ' where ID in (:VARIABLEID)'
:VARIABLEID = '1234','9999'
so the SQL:
select name, address, ID from employee :SELECTION
should be
select name, address, ID from employee where ID in ('1234','9999')
However, I got the missing right parenthesis error. I suspect it is something with the single quote, so I tried different ways, but it is still not working.
i have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
I am interested about the fast way to access all data in physical block. what is the quick way to bring data blocks using the rowid, I found this script but soon as I can have faster access:
select * from table_name t
WHERE ROWID between 'AAAUaOAAEAAHkJiAAA' and 'AAAUaOAAEAAHkJiAA8';
where 'AAAUaOAAEAAHkJiAAA' is the last element in the block and 'AAAUaOAAEAAHkJiAA8' is the first one
my question is can retrieve all the data in one block more quick than this query.
Look into the below table:
TABLE :- EMPLOYEE
________________________
| ID | SUPERVISOR |
|_______________________|
| A101 | B102 |
|________|______________|
| | |
| B102 | C104 |
|________|______________|
| | |
| C104 | D108 |
|________|______________|
| | |
| D108 | E104 |
|________|______________|
Here B102 is supervisor of A101 and C104 is supervisor of B102 and so on. I want to get this data into new table in below format
TABLE :- Hierarchy
________________________________________________________________
| ID |SUPERVISOR_1 |SUPERVISOR_2 |SUPERVISOR_3 |SUPERVISOR_4|
|______________________|_____________|_____________|____________|
| A101 | B102 | C104 | D108 | E104 |
|________|_____________|_____________|_____________|____________|
| | | | | |
| B102 | C104 | D108 | E104 | NULL |
|________|_____________|_____________|_____________|____________|
| | | | | |
| C104 | D108 | E104 | NULL | NULL |
|________|_____________|_____________|_____________|____________|
| | | | | |
| D108 | E104 | NULL | NULL | NULL |
|________|_____________|_____________|_____________|____________|
| | |
| E104 | NULL | NULL NULL NULL
|________|_____________|_____________|_____________|____________|
I want to insert 1st two rows into Hierarchy table, then I would like to update Supervisor_2 to Supervisor_4. Here I don't want to use 'CONNECT BY PRIOR', as it take more time to execute (there are millions of records).SQL code for same.
I have the following table with the some sample data:
|| Filename || receiving_site || originating_site ||
| fileA | siteA | HQ |
| fileA | siteA | siteA |
| fileB | siteA | HQ |
| fileA | siteB | HQ |
| fileA | siteB | siteB |
| fileB | siteB | HQ |
| fileB | siteB | siteB |
The table works in such way:
1. For each of the Filename, if originating_site is not the same as receiving_site, it means that the file has been sent to receiving_site but has not been acknowledged received yet.
2. For each of the Filename, if originating_site is the same as receiving_site, it means the file has been sent and received by the receiving_site.
My task is to list out all the Filename per receiving_site that has been sent, but not received yet by the receiving_site. For example from the sample data above, I am expecting to see that siteA, fileB has not been received yet.
How can I do that? I had tried MINUS and NOT EXISTS command, but I am just not able to get the result that I want.
IF I have Salary Table,In that Salary Table,How to retrieve 6 decimal place of data .
View 16 Replies View RelatedI have one table as shown below,
CREATE TABLE MAT
(matrl varchar2(100),
date_man date,
weight number(10)
);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat1','12-DEC-10',100);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat2','13-DEC-10',200);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat3','21-DEC-10',300);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat4','26-DEC-10',400);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat5','22-DEC-10',500);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat6','02-DEC-10',600);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat7','23-DEC-10',700);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat8','07-DEC-10',800);
The data will look like this .
matrldate_manWeight
mat112-Dec-10100
mat213-Dec-10200
mat321-Dec-10300
mat426-Dec-10400
mat522-Dec-10500
mat602-Dec-10600
mat723-Dec-10700
mat807-Dec-10800
I need to order by this data in terms of date and need to get the data as shown below. Acc_wt is accumulated weight till the material.
Date Weightacc_wt
mat602-Dec-106000
mat807-Dec-10800600
mat112-Dec-101001400
mat213-Dec-102001500
mat321-Dec-103001700
mat522-Dec-105002000
mat723-Dec-107002500
mat426-Dec-104003200
Can we make use of oracle lag and lead functions here?Or some other methods?
example for retrieve data from blob column using pl sql procedure in oracle?
View 2 Replies View RelatedHow to retrieve first hundred records from a table ?
FYI
---
The table size is 5 GB
The table count is 127922653
Table has 14 columns
Table is partitioned as well.
The table has 10 partitions.
I have a table created as below
create table tab123( x clob);
Inserted a row as below
insert into t values ('"<ProcessBatchRequest xmlns:inp1="http://services.abc.com/" ServiceVersionNumber="" xmlns="http://services.abc.com/GlobalBatchServiceV1.0">
<inp1:BatchDetail>
<inp1:ApplicationID>test.123</inp1:ApplicationID>
<inp1:ApplicationBatchID>test.123</inp1:ApplicationBatchID>
<inp1:MessageTimeStamp>2012-11-28T11:05:32.000-05:00</inp1:MessageTimeStamp>
[code]....
Now i want to retrieve the value present under a given xpath.
I have a table
select * from testing
Quote:
ID NAME REDATA
-------------------- -------------------- --------------------
1 ABC,DEF,GHI,LKJ 000001
2 MNC,GHI,CTF 000002
2 rows selected
select * from testing where name like ('GHI,TCF');
now my output should be as above because GHI is common in both the names.if any of the where condition string matches the Name field then I need that record to be retrieved.
I'm trying to retrieve data with multiple select statements. The query works fine for 1 account (segment6) but fails for more than account. Below is the query.
select PERIOD_NAME "Month/Year",segment1 "Company" ,Segment6 "GL Account", currency_code "Currency",Mmt "Movement",
BEGIN_BALANCE+PERIOD_DR-PERIOD_CR "Balance At Date"
FROM
(select gb.period_name "PERIOD_NAME",decode (gcc.segment1, '20', 'Internode', '10', 'Agile') SEGMENT1,
gcc.segment6 "SEGMENT6", gb.currency_code "CURRENCY_CODE", gb.begin_balance_dr "BBDR", gb.begin_balance_cr "BBCR",
[code].....
I have a table name as angdata77 having attributes like asigno..i want to retrieve data from angdata77 by using both group by & order by clauses.. for total count..am using the query as
select asigno,count(*) from angdata77 group by asigno order by asigno;
Is there any other query for retrieving the data from angdata77
I have a "select ... into" in my PL/SQL and it doesn't retreive any data(I suppose just certain columns because if it doesn't retreive a row then the PL/SQL should throw an error) when there are many users accessing this table. It shouldn't be some table locking right? Because if it is, it should wait until the table is available then it will retreive data. Currently it just proceeds with the PL/SQL and selecting nothing in that query. what details should I look at to trace the cause of this problem.
View 4 Replies View Relatedi have a column that contains 1 to 100 values but it has some missed data such as it does not has 50,45,34,23 etc..
so how could i find the missed data alone in a single query..
how to connect to Oracle to retrieve data using SQL language. I've started with a new company which is pretty much a sink or swim type of environment meaning you're an idiot if you don't figure it out on your own. I was told that we use Toad for Oracle 10g. I was given a server name; location and an .ora file named tnsnames that was given to me but I have no clue what to do with. I've come from companies where this was already setup. You just go into access to retrieve the data.
II have totally hit a brick wall with all the other roadblocks I encounter and all researched out. Where I can get step by step instructions on how to connect to start sql in Toad/Oracle?
I am using oracle 11g database.
unforunatly i delete the data from main table. and i operated alter stmt.
now how do i retrieve the data..??