I have two blocks, both are multi record block. 1st block is control block and second is database block. Both the blocks have same fields(Example: Location,Location_name,Location_Type). In the first block(Control Block) I have check box. My goal is when I check the checkbox and click on add button all the records which are selected in first block should go to second block.
View 3 RepliesI am Using the Check Box in the Detailed Block & I Have Assigned values 'Y' and 'N' when Checked & Unchecked If there are 3 Values Retrieved in the Detailed Block, Among that 2 Values are Checked the Cursor is Directly going the 2nd Value and Displaying the 2nd Value 2 Times rather than Displaying the 1st Value.
Below Attached is the Code Which i am Using.
GO_BLOCK ('ITEM_RESULT');
L_ITEM_CODE := :ITEM_RESULT.ITEM_CODE;--71720;--
first_record;
loop
message (' item id is '|| L_ITEM_CODE || '-' || :ITEM_RESULT.CHECKBOX);
if L_ITEM_CODE is not null and :ITEM_RESULT.CHECKBOX = 'Y' then
begin
[code]....
I have 4 blocks in my form which is basically used for travel booking for the employees in a company within India
1) Header block :- contains info abt the person who is booking the tickets for number of employees. Here i have given booking no a primary key.
2) Employee Detail :- Here the basic info of an employee is entered. Here i have taken booking number as a foreign key and then given emp_cd & booking number as a composite primary key.
3) Travel Detail :- Here the travel detail of individual employee will be entered wherein a unique trv_no will b generated 4 every single travel. Again i have taken foreign key as bkng_no frm 1st blck and emp_cd frm 2nd blck and tkn a composite primary key which comprises of bk_no,emp_cd and trv_no. this is used to maintain the uniqueness for single travel.
4) Vehicle Hotel Details :- This block is placed on different canvas for same form.It is meant for Other details in which details regarding hotel,vehicle etc booking aftr reaching the destination is entered. In this block thrs no primary key, but i hv taken the composite primary key of 3rd block as a foreign key since thr will be multiple entries for this one entire travel.
At every level there will be multiple entries for each corresponding entered record. I am able to enter one single record properly i.e. for 1 emp i am able to enter multiple travel details and his other requirements but asi try to enter more then one employee info, his travel details, other requirements i face an error stating foreign key constraint violated.Parent key not found for 3 rd level block.
How can i get the desired o/p wherein all the multiple records for every single subsequent record are stored correctly taking all the constraints in to consideration.
While increasing the tablespace i am getting below error. How to handle this
SQL> set lin 300
SQL> col TABLESPACE_NAME for a25
SQL> col FILE_NAME for a65
SQL> select TABLESPACE_NAME,FILE_ID,FILE_NAME,AUTOEXTENSIBLE,sum(BYTES/1024/1024) MB
2 from dba_data_files where TABLESPACE_NAME='SYSAUX' group by TABLESPACE_NAME,FILE_ID,FILE_NAME,AUTOEXTENSIBLE order by sum(BYTES/1024/1024) DESC,file_name;
TABLESPACE_NAME FILE_ID FILE_NAME AUT MB
------------------------- ---------- ----------------------------------------------------------------- --- ----------
SYSAUX 3 /ora2/oradata/dbname/sysaux_01.dbf NO 300
SQL> Alter database datafile 3 RESIZE 60000M;
Alter database datafile 3 RESIZE 60000M
*
ERROR at line 1: ORA-01144: File size (7680000 blocks) exceeds maximum of 4194303 block
My query is: I have created a master-child forms on one canvas. In a child form i have to enter multiple records, but after entering every record its prompting me to save it. I want to avoid it and save the entire thing once all my records are entered.
View 4 Replies View RelatedI'd want to select multiple records in my multi-record block. I'd also want to do that with checkboxes. When the user clicks on a particular checkbox, that should be selected and whatever record the user wants to check it should be added to selected records.
View 39 Replies View Relatedhow to save multiple records at once i did coding like this:
declare
cnt number;
l_rec number;
f_rec number;
begin
cnt := 0;
go_block('aan');
last_record;
l_rec := :system.cursor_record;
first_record;
[code]....
but this works as saving the last record only, not saving the all records.
I have a form with two data blocks, one parent, one child block.
The parent is holds mineral lease info while the child holds the mineral owner info, such as addresses and phone numbers. One owner can be in the owner block multiple times (different owner types). The form only displays one owner at a time.
We have a separate master owner table which holds owner address. (We set it up this way because we get electronic info from mineral companies that we have to load each year).
As you tab through the owner block, it checks the FEIN against the master table and pulls updated address info from the master table.
I have a problem in which if an owner is on the lease multiple times, when you tab through the first instance, it pulls in the new address info, but when you go to the next instance, it won't update. If you requery, it seems that the first update actually updated all the owner records on that lease. How can I turn this off?
This is my first post in the form and also i'm new to oracle forms technology.
I have the following issue:
In my form i have two Text-Fields to store some information for a claim:
A --> Profit and
B --> Loss
(only one of the filed can have value)
Also i have a data block where i store the reason of the claim (status). Reason can take three values 1, 2, 3. For each claim i can have more than one reasons stored in db table.
if the user input more than one reasons, then if one of them is 1 Profit should be set unprotected and Loss should be set to protected.
I have the following issue.
user creates a records with reason 1 : Profit text field is set to unprotected and Loss text filed is set protected.
user creates another record with reason 2: Profit text field is set to Protected and Loss text filed is set to unprotected. --> wrong
How can i validate the values of the two records and create the desired functionality?
I have used the POST-TEXT-ITEM trigger but it works correct only for one record. i insert two records with the above order i have the issue i describe.
I have Multi record Block and for that block i have created one button, if we press that buttion it will open new block and it will post the records, Unfourtunately that block table dont have Primary key or any constraints .. so when we press that buttoon multiple times .. its posting multiple times..
Now i need to restrict to that which is should not post the records multiple timies i have tried by controling the paraemter..I have created one Non data base item initially value i assigned to 'N"
if the value is "N" then am doing process and showing the records and after processing am assigning the value to 'Y', if there are multiple records , at block level in pre-record trigger am assigning as 'N'.
i'm working on a project right now using Oracle Forms 6.0 and Oracle 9i. after i create a record and save the data in the table, how can i generate/create a text file of that particular record? i need this text file in order to run it in another computer and somehow upload the data in the text file to another database.
i will also need to create the text file for multiple records.
i have a master-detail form.
detail block is tabular.
when-button-pressed trigger iam inserting records in another table.i write
insert into ONHAND_QTY_LOCATION(sno,matid,matcode,description,partno,onhand_qty,location)
values (:ship_dtl.slno,
:ship_dtl.mat_id,
:ship_dtl.mat_code,
:ship_dtl.description,
:ship_dtl.part_no,
:ship_dtl.rec_qty,
:ship_mstr.place_from)
it is inserting only one record in onhand_qty_location table that too the last record.
i want all the records which iam entering in detail block should get entered in onhand_qty_location table.
I am new to the Oracle Forms.
I need a Master Detail oracle form for Oracle EBS.
The form should use only one table.
I need the form should look like User Form in EBS.
I created 2 data blocks and designed. When I run the form and key in some data, I notice multiple records stored.
like
Empno Ename Sal Comm
101 null null null
null John 2300 500
Empno is in Master Block.
And remaining are in Detail block. How to remove the duplicate records so that my required output should be like
Empno Ename Sal Comm
101 John 2300 500
I'm using Oracle forms 10g. In the form i have this multiple records under one block. After performing the query, all records are cannot be updated. And i have this buttons at the right side that will enable the certain item that can only be updated. My problem is i cannot enable the item in the first record,instead of first record all records in that item was enable.
View 8 Replies View RelatedI have made a travel booking system which comprises of 3 forms
1)Travel Booking form
2)Reservation Form
3)Cancellation Form
Under one booking number i can add multiple users in which they can have there multiple travels.
Users can cancel there individual travels under a prescribe booking number which on doing the Cancel flag turns to 'Y'.
What i want is, If a user is cancelling his/her travel under any booking number then while retriving the records in Travel Booking form, the travels which are cancelled should not be in enable mode.
For one user there can be 4 travels out of which 2 are cancelled, how can i track only those records whoes cancel flag is set to Y. some logic to find it out. Else can i use :system.cursor_record. If yes, How to use it for this system.
I got a form with few columns and a check_box. If the user selects n number of check boxes and click the button Save. The corresponding records should be inserted to XX_AP_CUSTOM table.
I have written the following below code in when-button-pressed trigger. With this i am able to insert only one record i.e where the current record indicator is there, even though multiple check-boxes(records) are selected.
declare
begin
IF :XXFBI_INV_QUOTE_ANAL_BLK.CHECK_BOX = 'Yes' THEN
--IF CHECKBOX_CHECKED(:XXFBI_INV_QUOTE_ANAL_BLK.CHECK_BOX) = TRUE Then
--app_insert.insert_record('WHEN-BUTTON-PRESSED');
insert into xxfbi.XXFBI_INV_QUOTE_ANAL(Item,
[code]......
I know that i have to use last_record and first_record and for loop to insert multiple selected records, but dont know how to do it.
i am using form6i & oracle 8i.
i have master -detail form. both are database blocks.
i have inserted values for the master block bt not for the detail record my problem is.. "user should not be allowed" to move to next record of the master block before saving the current record
We are having two data blocks as Earnings and Deductions. We need to export this to an excel in single sheet parallel [ imagine your payslip format ].
if we use normal text_io we are not able to get the result we want. so we have tried using a package called export2excel. we achieved what we want. The form is working perfectly in client server concept. When we move the same form to our Unix application server, it is not working.
I have this error. To put it simply I have two blocks.
Block1 contains two drop down list with PL/SQL statements for queries.
Block2 contains tabular form created from block wizard (I tried already in manual)
that will catch the result in Block1 queries.
Now I have a button with a trigger when-button-pressed that contains
BEGIN
INSERT INTO dummy1
VALUES ('hello',1,2,3);
COMMIT;
END;
My goal is to add into dummy1 values from :block2.item_name1, :block2.item_name2, :block2.item_name3 but to put it simply I tried these values but I received the same error.
When I run it and first things first click the button, the values will be added into dummy1 table but when I execute the block1 - dropdown list queries and try to press the button. I received the error.
I HAVE 2 BLOCKS E.G. MASTER-DETAIL AND i have created it manually then how to insert values thrugh these blocks using a button called "save" using "commit_form;" suppose form fields are
master-block:
emp_id
emp name
age
detail block:
address
city
where emp_id is primary key as well foreign key in detail table
how these values will be inserted in both tables
I have created two non base table text items(from date, to date) and if values are not entered from front end i.e. null then hadrcoded in pre_query trigger to default values.But even i enter values dynamically from front end and when ever i press fetch button ,it is taking default values i.e. it is not accepting values what i have entered.
View 6 Replies View RelatedI have two blocks, blockA and blockB, both from the same table which is tableX.
When I query from blockA and it has returned results, then I go to blockB and edit some data and save, there was no problem. But when I don't execute query from blockA or if the query returned zero results, then I go to blockB and edit some data then save, I got this error. THe cursor then go to blockA first item. So now I have to delete that empty row before saving.
I am working on form builder 6i. I have a header block A(Multi record block), child block B. Both are non control blocks. My requirement is, if i put the cursor in any header record, i want to auto populate corresponding child record like in master child relation.
which trigger i need to write logic to auto populate the child record.
I have a table as col_1 number,col_2 varchar2(10)
col_1 col_2
1 abcdefghijkl
what i want is i've to split
col_1 col_2
1 abcdefghij
1 kl
I have a table formatted like this
ID|First Name|Second Name
1|X|X
2|X|X
3|X|X
4|X|X
and I want to insert First Name and Second Name records using the ID as the reference. The new data is currently in a .csv file, but I could put them in another table if that's easier.
ID|First Name|Second Name
1|Adam|Adamson
2|Ben|Benson
3|Chris|Christophers
4|Dave|Davidson
I understand how to do individual updates, I want to know how it is possible for me to do this as one query, as I have several thousand records to update.
I have a small requirement...
Create table temp_a (source_code varchar2(100), target_code varchar2(1000));
Insert into temp_a values ('1','002.0 AND 002.9');
Insert into temp_a values ('2','729.90 AND 079.99 AND 002.9');
Output :
1 002.0
1 002.9
2 729.90
2 079.99
2 002.9
So, once we get the output, it needs to be joined to another table. I did Google search, but most of them are retuning collections / arrays as output. Not sure how I join the collection with the table.
create or replace function splits
(
p_list varchar2,
p_del varchar2
) return split_tbl pipelined
is
l_idx pls_integer;
[code].......
I'm looking to create a STORED PROCEDURE to do the following per v1...but I seem to misunderstanding some ORACLE concept(s) as when called in a PLSQL window I'm getting an ORA-01422 message when using the V2 syntax.
Ideally I want this code called from VB, but for the moment I'm trying to get it to work when called from the PLSQL Developer toolkit. Am I trying the wrong concept? per previous posts my background is MSSQL, but I've used Oracle SQL from approx 2 years (at a SQL level) only.
v1
create procedure myabc
as
begin
SELECT custNAME
FROM MYCUSTOMER
[code]....
I have created the following function in oracle database 10g then I used it in Oracle reports 6 . It is working fine for single row(one value). But when there is multiple rows then it show error .
Note:ot.po_code is number datatype and clr_name is varchar2 data type.
this is the script
create or replace FUNCTION get_colour_name (POC number)
RETURN VARCHAR2 IS
CLR_NAME VARCHAR2(100);
BEGIN
SELECT DISTINCT BC.COLOUR_NAME INTO CLR_NAME
[Code].....
I want to insert multiple records in a single row. Example: I have a below query
select '"'||c1||'","'||c2||'","'||c3||'"'from (select 'ABC' as C1,'ZYX' as C2,'TEST' AS c3from dual unionselect 'A1' as C1,'a2' as C2,'A3' AS c3from dual)
And I want to insert the above 2 records in table T1 as a single row as below:
"A1","a2","A3""ABC","ZYX","TEST" Column1"A1","a2","A3""ABC","ZYX","TEST"
The below sql is executed by reading the flat file row by row which is having more than 2 million rows.
SELECT CUST_SEQ_R, BANK_BRANCH_C INTO v_CustNo, v_BrnachCode
FROM TABLE1
WHERE ACCOUNT_NO = v_Acc_No
AND VIST_NO = v_VistnO
AND CUST_JOIN_DATE = to_Date(v_Cust_Date,'yyyymmdd');
The procedure opens the file, reads one record, parses it, then it executes few select statements then it loops back to the top where it reads one more record and runs through each activity again. How to read batch of records rather than one record at a time. Is something like creating staging table or by using bulk collect.
v_Acc_No,v_VistnO,v_Cust_Date are variables that read from below file.
test data:
BNC192363A1291197OQ6HA0H05557004559020080528
BNC194566A1280615VT8FA0H05917004016020080530
BNC192588A1263301VB2LE0G11065005707020080519
BNC178369A1295822MM4XB0G11820006839020080512