how to save multiple records at once i did coding like this:
declare
cnt number;
l_rec number;
f_rec number;
begin
cnt := 0;
go_block('aan');
last_record;
l_rec := :system.cursor_record;
first_record;
[code]....
but this works as saving the last record only, not saving the all records.
I have a block based on a table and display a few records on the form after retrieving records from the table behind. Now I should be able to edit a record or add a new record to the existing records on the screen. So when i click the save button I only want the rows which are new or have been edited to go back into the db. This is the piece of code I was using for the save button in the on-button-clicked action.
IF alert_button=alert_button1 THEN
GO_BLOCK('my_block');
IF NOT Form_Success THEN RAISE Form_Trigger_Failure;
END IF;
/* ** Commit if anything is changed */
IF :System.record_Status IN ('CHANGED','NEW') THEN Commit_Form;
END IF;
msg_info('Your changes have been saved.');
END IF;
When I do this all the records on the screen gets inserted into the table instead of only the one's I have edited or newly inserted. I only want to insert rows which are new or edited into the table after I click the save button.
here i m giving the code
DECLARE
TYPE SUBNO_TABLE_TYPE IS TABLE OF
TRANS_DEICMAIN1.SUBNO%TYPE
INDEX BY BINARY_INTEGER;
SUBNO_TABLE SUBNO_TABLE_TYPE;
K NUMBER := 1;
S NUMBER := 1;
[code]...
HERE CHECK1 IS A CHECKBOX.WHEN I AM USING THIS CODE ONLY ONE RECORD IS SAVED AT A TIME INSTEAD OF SAVING ALL RECORDS.
My query is: I have created a master-child forms on one canvas. In a child form i have to enter multiple records, but after entering every record its prompting me to save it. I want to avoid it and save the entire thing once all my records are entered.
View 4 Replies View RelatedI'd want to select multiple records in my multi-record block. I'd also want to do that with checkboxes. When the user clicks on a particular checkbox, that should be selected and whatever record the user wants to check it should be added to selected records.
View 39 Replies View RelatedI have a form with two data blocks, one parent, one child block.
The parent is holds mineral lease info while the child holds the mineral owner info, such as addresses and phone numbers. One owner can be in the owner block multiple times (different owner types). The form only displays one owner at a time.
We have a separate master owner table which holds owner address. (We set it up this way because we get electronic info from mineral companies that we have to load each year).
As you tab through the owner block, it checks the FEIN against the master table and pulls updated address info from the master table.
I have a problem in which if an owner is on the lease multiple times, when you tab through the first instance, it pulls in the new address info, but when you go to the next instance, it won't update. If you requery, it seems that the first update actually updated all the owner records on that lease. How can I turn this off?
I have two blocks, both are multi record block. 1st block is control block and second is database block. Both the blocks have same fields(Example: Location,Location_name,Location_Type). In the first block(Control Block) I have check box. My goal is when I check the checkbox and click on add button all the records which are selected in first block should go to second block.
View 3 Replies View RelatedThis is my first post in the form and also i'm new to oracle forms technology.
I have the following issue:
In my form i have two Text-Fields to store some information for a claim:
A --> Profit and
B --> Loss
(only one of the filed can have value)
Also i have a data block where i store the reason of the claim (status). Reason can take three values 1, 2, 3. For each claim i can have more than one reasons stored in db table.
if the user input more than one reasons, then if one of them is 1 Profit should be set unprotected and Loss should be set to protected.
I have the following issue.
user creates a records with reason 1 : Profit text field is set to unprotected and Loss text filed is set protected.
user creates another record with reason 2: Profit text field is set to Protected and Loss text filed is set to unprotected. --> wrong
How can i validate the values of the two records and create the desired functionality?
I have used the POST-TEXT-ITEM trigger but it works correct only for one record. i insert two records with the above order i have the issue i describe.
I have Multi record Block and for that block i have created one button, if we press that buttion it will open new block and it will post the records, Unfourtunately that block table dont have Primary key or any constraints .. so when we press that buttoon multiple times .. its posting multiple times..
Now i need to restrict to that which is should not post the records multiple timies i have tried by controling the paraemter..I have created one Non data base item initially value i assigned to 'N"
if the value is "N" then am doing process and showing the records and after processing am assigning the value to 'Y', if there are multiple records , at block level in pre-record trigger am assigning as 'N'.
i'm working on a project right now using Oracle Forms 6.0 and Oracle 9i. after i create a record and save the data in the table, how can i generate/create a text file of that particular record? i need this text file in order to run it in another computer and somehow upload the data in the text file to another database.
i will also need to create the text file for multiple records.
i have a master-detail form.
detail block is tabular.
when-button-pressed trigger iam inserting records in another table.i write
insert into ONHAND_QTY_LOCATION(sno,matid,matcode,description,partno,onhand_qty,location)
values (:ship_dtl.slno,
:ship_dtl.mat_id,
:ship_dtl.mat_code,
:ship_dtl.description,
:ship_dtl.part_no,
:ship_dtl.rec_qty,
:ship_mstr.place_from)
it is inserting only one record in onhand_qty_location table that too the last record.
i want all the records which iam entering in detail block should get entered in onhand_qty_location table.
I am new to the Oracle Forms.
I need a Master Detail oracle form for Oracle EBS.
The form should use only one table.
I need the form should look like User Form in EBS.
I created 2 data blocks and designed. When I run the form and key in some data, I notice multiple records stored.
like
Empno Ename Sal Comm
101 null null null
null John 2300 500
Empno is in Master Block.
And remaining are in Detail block. How to remove the duplicate records so that my required output should be like
Empno Ename Sal Comm
101 John 2300 500
I'm using Oracle forms 10g. In the form i have this multiple records under one block. After performing the query, all records are cannot be updated. And i have this buttons at the right side that will enable the certain item that can only be updated. My problem is i cannot enable the item in the first record,instead of first record all records in that item was enable.
View 8 Replies View RelatedI have made a travel booking system which comprises of 3 forms
1)Travel Booking form
2)Reservation Form
3)Cancellation Form
Under one booking number i can add multiple users in which they can have there multiple travels.
Users can cancel there individual travels under a prescribe booking number which on doing the Cancel flag turns to 'Y'.
What i want is, If a user is cancelling his/her travel under any booking number then while retriving the records in Travel Booking form, the travels which are cancelled should not be in enable mode.
For one user there can be 4 travels out of which 2 are cancelled, how can i track only those records whoes cancel flag is set to Y. some logic to find it out. Else can i use :system.cursor_record. If yes, How to use it for this system.
I got a form with few columns and a check_box. If the user selects n number of check boxes and click the button Save. The corresponding records should be inserted to XX_AP_CUSTOM table.
I have written the following below code in when-button-pressed trigger. With this i am able to insert only one record i.e where the current record indicator is there, even though multiple check-boxes(records) are selected.
declare
begin
IF :XXFBI_INV_QUOTE_ANAL_BLK.CHECK_BOX = 'Yes' THEN
--IF CHECKBOX_CHECKED(:XXFBI_INV_QUOTE_ANAL_BLK.CHECK_BOX) = TRUE Then
--app_insert.insert_record('WHEN-BUTTON-PRESSED');
insert into xxfbi.XXFBI_INV_QUOTE_ANAL(Item,
[code]......
I know that i have to use last_record and first_record and for loop to insert multiple selected records, but dont know how to do it.
I have created a form which as two block as master and detail.I am facing two problem in my detail block.
First: When I populate records in detail block, it prompt a message 'Do you want to save record ?'.
Second : When I alter any value in detail block and move to next record, it prompt a message 'Do you want to save record ?'
Is there any way where, system don't prompt me a message for saving record and user can continue with changes and save the records when he desire.
the data not save the record the item CMPID not generate a number or id to press button NEW
secondly to click the button SAVE they not save the partcular transaction.
I am working on form 6i. I want to disable the 'SAVE' button which can be seen in the menu (front end).
View 2 Replies View Relateddeclare
blk_name varchar2(60);
form_name varchar2(60);
[Code].....
this is my coding on save button. this is working fine but only once. when i enter the data second time and try to save, it didn't do anything. what should i do?
I make button in detail section using this location button call another forms, I want first update the location entry then save our main forms.
View 3 Replies View Related I have seen many times that people are confused for how to save and retrieve images in Oracle Database from forms. Here I have created a sample form. All the coding is there. And also required scripts are also written in this post. Please download the form create the scripts and run the form.
Here we go:
Database : 9i
Forms : 6i
Create Scripts:
CREATE TABLE DOCS_COMP_DOCUMENTS
(
DOC_ID VARCHAR2(10),
DOC_NAME VARCHAR2(100),
DOC_SCANNED_COPY LONG RAW,
FILE_NAME VARCHAR2(50),
FILE_EXTENSION VARCHAR2(3)
)
[code].......
Note: This Procedure is to find the file name and extension and store it as well in database. Create this procedure in database.
To retrieve images just press F7 & F8 in forms
Download the attached .fmb module and run it.
I have updated a table from the form and written a update statement ON block level trigger ON-UPDATE
"UPDATE_RECORD;
update employees set hiredate=to_date(:EMP.TXT_DATE,'dd-MON-yyyy')
where employees.empno=:emp.empno;
COMMIT_FORM;"
Here employees is my table and emp is my block
I have a master-detail form on which i have 2 buttons. save button and another location button in detail.on location button i am calling a form and updating location of the material entered in detail(tabular).
The thing is my form should not get save without updating location for each record entered in detail(tabular).if user try to save form without updating or pressing location button it should give message PLEASE UPDATE YOUR LOCATION.
I have created one form with control block and database data block.here i have created one save button based on that i have to save records both control and database block in database block table.If i i write commit_form record will be saved on different rows in a table means control block record in one row and datablock record in one row.But i want to update in one row(one line) in a table.
View 2 Replies View RelatedI have a multi tab form. When I open any form; the form no. and form lists are automatically uploaded. I can enter the rest of the data and save the form. The problem is; if I try to open another tab(form), system did not allow it and ask to enter data in the already open form fields. I can only save the form, which I open first.
View 2 Replies View Relatedwhich is the trigger that fires when we Press the Standard 'Save' button from the toolbar? And i want to update the record on another table which is not in data block by using this save button? @ that time i want to display message like transaction complete:1 records saved..how to do this?
View 24 Replies View RelatedI have created a form using data block wizard and lay out wizard. I want to disable the SAVE button, I gave the following in Triggers WHEN-NEW-FORM-INSTANCE
set_item_property('SAVE',visible,property_false);
but when I run the form it displays this message at the bottom of the screen
Frm 41045:Cannot find item invalidID.
I have a table as col_1 number,col_2 varchar2(10)
col_1 col_2
1 abcdefghijkl
what i want is i've to split
col_1 col_2
1 abcdefghij
1 kl
I have a table formatted like this
ID|First Name|Second Name
1|X|X
2|X|X
3|X|X
4|X|X
and I want to insert First Name and Second Name records using the ID as the reference. The new data is currently in a .csv file, but I could put them in another table if that's easier.
ID|First Name|Second Name
1|Adam|Adamson
2|Ben|Benson
3|Chris|Christophers
4|Dave|Davidson
I understand how to do individual updates, I want to know how it is possible for me to do this as one query, as I have several thousand records to update.
I have a small requirement...
Create table temp_a (source_code varchar2(100), target_code varchar2(1000));
Insert into temp_a values ('1','002.0 AND 002.9');
Insert into temp_a values ('2','729.90 AND 079.99 AND 002.9');
Output :
1 002.0
1 002.9
2 729.90
2 079.99
2 002.9
So, once we get the output, it needs to be joined to another table. I did Google search, but most of them are retuning collections / arrays as output. Not sure how I join the collection with the table.
create or replace function splits
(
p_list varchar2,
p_del varchar2
) return split_tbl pipelined
is
l_idx pls_integer;
[code].......
