Forms :: Change Block Status In Custom.pll?
Mar 9, 2010
I have a requirement to get decrypted value of national_identifier from database and display in Social Security number, when user queries for employee in employee form of HRMS. Also, National_identifier should be in encrypted format in database table always.
To meet above requirement, I am using custom.pll. In WHEN-NEW-BLOCK-INSTANCE I am getting decrypted value of national_identifer from database and assigning it to :person.national_identifier(database block) by using COPY function, so far it is working as expected.
When user query for employee, he/she able to decrypted value. but if user closes the form it is asking 'Do you want to save changes you made' as there is a change in :person.national_identifier.
Do we have any property to reset record/block status to something like unchanged, so we will not get 'Do you want to save changes you made message'.
View 15 Replies
ADVERTISEMENT
May 26, 2010
i have created one custom block in that i am taking one value in text_item and on 2nd form i have data block on that block i want filter by using WHERE clause
in that where clause i want to compare value which is taken in custom block by user..what need to write in where clause?
View 1 Replies
View Related
Jun 15, 2011
I have data block that has hundreds of records. On a screen I display 20 records at a time. On that same screen I have "find badge" function where user types badge/employee id and presses a button to find the record in a data block. I have no problem finding the records in a list and pointing the curser to appropriate record. My question is (which is a user request) if the badge/employee id is found to make that record to be the first record in a list.
View 2 Replies
View Related
Oct 30, 2013
I have a scenario wherein i want to enable / disable a block based upon value of one of its column value. i.e., if value of approval status in
(IN ( 'INCOMPLETE' , 'RETURNED' , 'REJECTED' ) THEN
SET_BLOCK_PROPERTY('RFN_HEADERS_ALL', UPDATE_ALLOWED, PROPERTY_TRUE);
SET_BLOCK_PROPERTY('RFN_LINES_ALL', UPDATE_ALLOWED, PROPERTY_TRUE);
SET_BLOCK_PROPERTY('RFN_HEADERS_ALL', DELETE_ALLOWED, PROPERTY_TRUE);
SET_BLOCK_PROPERTY('RFN_LINES_ALL', DELETE_ALLOWED, PROPERTY_TRUE);
else.....
but the code is not working in pre-query, pre-select or post-query
View 2 Replies
View Related
Feb 28, 2012
Is it possible to get the status of form or block every time? I mean if user presses Enter query key, it should display some status and if user presses execute query key then it should reflect some status. If user update any then it should reflect.
View 7 Replies
View Related
Dec 28, 2011
I Require to Fetch the Group of Value in Item Block Selected through the User Selected LOV Value in Master.
Through Loop i Fetch the Records in Item Block.
When User Change the Selected LOV Value Require to Clear the Item Block.
BEGIN
FOR NRM IN (SELECT MTRLTYPE,STATUS,
MTRL_NO,MTRL_ID FROM JAWOADMIN)
LOOP
GO_BLOCK('NRMTRL_ITEM');
:NRMTRL_ITEM.NRMTRL_TYPE := NRM.MTRLTYPE;
:NRMTRL_ITEM.REMARKS := NRM.STATUS;
:NRMTRL_ITEM.NRMTRLREF_NO := NRM.MTRL_NO;
:NRMTRL_ITEM.NRMTRLREF_ID := NRM.MTRL_ID;
NEXT_RECORD;
END LOOP;
END;
How to Clear the Block before the above loop.
View 1 Replies
View Related
Dec 20, 2012
can we use set_block_property to program to switch multiple relationships. for example
if true then use relationshipA
else relationshipB
end if;
View 9 Replies
View Related
Apr 4, 2011
I want to change Database Data Block Property at runtime.
View 4 Replies
View Related
Jan 4, 2012
I'm trying to change the attributes on a display where the info is gathered via a routine that fills the data block with info. I've searched and tried using 'set item instance property' in several places within the data block using different triggers but still doesn't work.
No errors are encountered or shown. Attributes aren't changed based on a small test condition.
View 2 Replies
View Related
Jan 21, 2006
How to change the status of remote_login_password file!
View 14 Replies
View Related
Aug 6, 2010
how to change tablespace plugged_in =no status to yes
View 1 Replies
View Related
Jun 21, 2011
In one of the databases, we have created more temp tables as on commit preserve rows. but i want to change the on commit preserve rows to on commit delete rows as per application requirements.I have searched the google but i didnt find any alter scripts for it.?
View 1 Replies
View Related
Jan 4, 2012
One of our developers team member had created a Anonymous block program to do something in the Database, and he forgotten and terminated the session without confirming the program's status, whether it was fully ran or not.
Is there any way to check out the status of this, which happened yesterday?
View 3 Replies
View Related
Sep 5, 2012
I am studying about these two technologies and the only difference that I found was that optimization doesn't backup the duplicated archivedlogs.
If both ignore not changed blocks, what is more effective?
The optimization backup also has some tracking file?
View 1 Replies
View Related
Aug 3, 2011
rdbms:oracle 10gr2
os:windows
with reference to
[URL]......
Quote:
A.2.2 Writing Backup Scripts for Disk and Tape Scenarios
As in the disk-only scenarios, the backup scripts in this section are categorized based on database workload. as stated very clearly it depends on the workload, more precisely the rate of block change. The size of the database can be found out based on formula from
[URL]....
so how would I know the rate of block change in order to know which script is suitable for me? I try to find out the rate of block change for the database based on change tracking file but based on
[URL].....
Quote:
The size of the change tracking file is proportional to the size of the database and the number of enabled threads of redo. The size is not related to the frequency of updates to the database. So how do I determine the rate of change? can the rate of block change based on size of archive logs?
I have the following information with me:
starting from 5/10/2011 0101
ending 5/18/2011 1114
this constitute to 9.5 days
F:
ecover_area>dir/w
1644 File(s) 27,942,770,176 bytes
2 Dir(s) 10,019,270,656 bytes free
average size of each file 27,942,770,176/1644
=16996818.841849148418491484184915
average size of each day's log = 27,942,770,176/9.5
=2941344229.0526315789473684210526
about 3G
If I have a database size of 92G, based on the archive log size of about 3G per day, can I conclude that a change of 3G/92G is considered as few block change?
View 1 Replies
View Related
Sep 10, 2011
does, block change tracking file is read during incremental level 0 backup?
View 4 Replies
View Related
Jun 20, 2012
i want to enable block change tracking as our incremental level1 backup take a lot of time but i have a worry which i found it on oracle support and tha is as follows Database Instance Hang at Database Checkpoint With Block Change Tracking Enabled. [ID 1326886.1]
View 2 Replies
View Related
Oct 11, 2011
i did such commands
1. RMAN -> backup incremental level 0 database;
2. SQLPLUS -> alter database enable block change tracking using file '/home/oracle/block_change_tracking.tr';
3. RMAN -> backup incremental level 1 cumulative database;
4. RMAN -> backup incremental level 1 cumulative database;
5. RMAN -> backup incremental level 1 cumulative database;
and for such order i noticed that block change tracking file wasn't used for any cumulative backup. for each cumulative backup was done full scan over database.
it was used after i did incremental level 0 backup, and again incremental 1 cumulative.
if i want this feature to be usefull i should enable it before my incremental level 0, or i should do incremental level 0 immediately after i enable it?
View 6 Replies
View Related
Oct 8, 2013
I have a LOV in a custom oracle forms.this lov is linked to a record group.
Presently the column on which lov is created does not contain any value.
I want to insert value into the lov through the forms.
I am not able to insert data into it through forms
View 12 Replies
View Related
Dec 7, 2010
Is it possible to add some custom image on a button?
If so, How to do it?
View 8 Replies
View Related
May 23, 2011
what is the basic workaround to provide to switch from one form to another form via custom-menu at runtime?
I attached a menu-item to every of my forms and I can call them seperately from the forms builder. But I am not able to switch between the forms then. If I am clicking on a menu-item, I get frm-40010.
P.S. I'd prefer to close the current form, if the new form has been opened. Do I have to control this seperately or is the closing of the last form default?
View 3 Replies
View Related
Nov 19, 2010
i have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
e.g
item11 item21 item31 chkbox1
item12 item22 item32 chkbox2
Scenario like this :
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
View 12 Replies
View Related
May 5, 2012
i have a master detail form, In Master block we have one field cheque amount and in Detail block we have field receiveable amount invoice wise. if company paid us a cheque amount we will enter this amount in Master block field Cheque amount and in detail block there will be invoice wise receivable amounts. i want to distribute the cheque amount in detail block invoice wise for example
Cheque amount in master block = 291
Invoice wise receiveable amount is as follows
Invoice No , receivable amount , Received amount
10, 196 , 0
20 , 95 , 0
30 , 54 , 0
Result should be as follows:
Invoice No , receivable amount , Received amount
10, 196, 196
20 , 95 , 95
30 , 54, 0
Received amount field should be distributed according to the receivable amount when recevied amount = cheque amount then remaining will be 0.
View 2 Replies
View Related
Jul 24, 2010
I have a multi record control block (basically a text item displaying 6 records) where user enters values and I want to process the values using pre-insert trigger.
I want to read value in each record and then do some tasks using a pre-insert trigger before I commit the values. To navigate between the records I was using first_record, next_record, clear_record built-ins but it gives errors like "40737-illegalrestricted procedure next_record in pre-insert trigger".
View 3 Replies
View Related
Dec 14, 2010
How and where to set Auto Refresh on Custom Form ...?
View 1 Replies
View Related
Dec 18, 2010
I want to test custom Jar files with Forms 6i from my desktop, but I cannot get the Run Form->Web to work. Is it possible for the run time to load the just jars for PJC when you do Run Form -> Client/Server? So far, when I have done this, it does not execute any PJC.
View 2 Replies
View Related
Jul 4, 2010
i am developing a application using oracle forms 10g. i can't use the standard template.fmb because my application does not run in ebs. there comes the problem: i want to implement the lov button function like the template does, such as :
1. when the text item get focus, lov button display.
2. when the text item lost focus, lov button disappear.
3. when scrollbar scrolls, the position of lov button adjust accordingly.
4. there is only one lov button in one form and the lov button was created dynamically.
View 2 Replies
View Related
Mar 6, 2012
Getting error FRM-47023: No such parameter named CHART_OF_ACCOUNTS_ID exists in our custom form XYZ
View 5 Replies
View Related
Jun 5, 2013
I would like to know if it's possible to use PIPELINED return inside a custom library with Oracle Forms Builder? For now, i try to use it, but i get error about client side.
my code.
PACKAGE TEST IS
TYPE measure_record IS RECORD(
l4_id VARCHAR2(50),
l6_id VARCHAR2(50),
[code].......
the body compile, but not the other part. I would like after call the select * from test.get_ups(0); with a cursor into another function.
View 3 Replies
View Related
Mar 12, 2010
Error is occurred during the transaction...i.e.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4194], [89], [83], [], [], [], [], []
View 7 Replies
View Related
