I'm cloning a database from an existing dbca template. The clone is failing with datafile does not exist, because during the copying step, all the datafiles' name are changed, how do I force it to force dbca to keep the same names from the original database?
View 3 RepliesI have two databases runing on same server. Both databases are oracle 11g R2 and platform OEL 5.5 When I run "show configuration"
DGMGRL> show configuration
Configuration - DGConfig
Protection Mode: MaxPerformance
Databases:
prm - Primary database
stb1 - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:SUCCESS
Everything is going well.Now I want to change dbfilenameconvert parameter, but getting an error :
DGMGRL> edit database prm set property dbFileNameConvert ='/u01/app/oracle/oradata/stb1,/u01/app/oracle/oradata/prm';
Property "dbfilenameconvert" updated
DGMGRL> show configuration
Configuration - GConfig
Protection Mode: MaxPerformance
Databases:
[code]...
It's same error when I change this parameter in SQLPlus.
I wrote an sql script (spooler) which runs a select query and produces results into a file.
I want to have the filename with the year attached. Can i pass a parameter when i run the script from SQL*PLUS
@'B: Year Of FinancingPLSQLspoolersSpooler_File_Creation' 01/01/2010 2010;
the first parameter 01/01/2010 is passed to the select query and taht works fine.
Since the output file contains 2010 data, I want the spooled file to mention in its name the 2010, so User's can know the file contains 2010 data in it.
So i wrote the statement within the spooler script
SPOOL X:HARSOrganizationsFinancialDataFor&2.txt
&2 should take 2010 has its value and produce the file FinancialDataFor2010.txt
how to use Substitution variables to produce the Filename i want.
usually i create oracle databases using the create database command, however im trying this time to use the dbca -silent -createDatabase -templateName General_Purpose.dbc - i have edited the General_Purpose.dbc to have the control files. datafiles etc to go to a different location other then the $ORACLE_BASE and no luck so far, whatever i do even changing the $oracle_base just dumps all into a location, how can i force it / change it - this is Oracle 11GR2 on linux
see sample of my General_Purpose.dbc
<initParam name="control_files" value="/u01/oradata/control01.ctl, /u02/oradata/control02.ctl"/>
<initParam name="diagnostic_dest" value="/backup/oracle/oradata"/>
[Code].....
ASM instance SID = +ASM and the database installation was under SID =rdbms112
Im just in the process of running dbca and have specified which ASM disks to use for data, but then on the next screen of the dbca, im asked for the ASMNMP password,
the password for 'oracle' user is 'oracle' but im getting this message:
"Could not validate ASMNP password due to the following error: "ORA-01031-insufficient privilages" Do you want to continue? If you contiue ASM will not be configured to be moitored by database controll "
when I was asked for privilaged operating system groups when setting up ASM
OSDBA, OSOPER and OSASM ... were all set to group 'dba'
the oracle user is in the 'dba' group
How do I create a filename with a date using SQL?
View 2 Replies View RelatedI am using Reports6i. I want to know how to show the image on the report but the image is not in static filename.
I used "Link File", but the "Source Filename" Boilerplate can only allow me hardcode the file path and file name.
Remark: The image is not stored in the database.
I want copy some tables from one database to another. Which of following is the fastest way:
- INSERT /*+APPEND*/ via database link
- Transportable Tablespaces
- datapump IMP/EXP (I supposed it's the slowest way)
i could copy data from tableA to tableB with the scenario below
1) Currently we have no unique key / primary key defined on both of this tables, due to the nature of data, so insert/update will not work
2) We cant truncate/insert as user will be accessing this tables when the copying process takes place, so we dont want to end up having a scenario where the table does not contain data at a certain time
Will materialize view full refresh work in refreshing a table so we could avoid the problem faced in point 1 & 2.
I have two tables namely PERSON and WIFE. I want to make WIFE's data available in PERSON table while keeping entries of WIFE maintained and at the same time adding some the values of PERSON against the data of wife.
PERSON Table
PK NAME ADDRESS IS_MARRIED
1 John ab city Y
2 Varvatos cd town N
3 Smith ef town Y
4 Henry gh city Y
5 Lynda gh city Y
WIFE table
PK PERSON_ID (FK) NAME
1 1 Alice
2 3 Rosy
3 4 Lynda
Now i want to copy data of WIFE table into PERSON table like this PERSON table
PK NAME ADDRESS IS_MARRIED
1 John ab city Y
2 Varvatos cd town N
3 Smith ef town Y
4 Henry gh city Y
5 Lynda gh city Y
6 Alice ab city Y
7 Rosy ef town Y
As in the given example you might have noticed that ADDRESS of wife is same as of her spouse and same goes for IS_MARRIED column. Moreover, the PK is also not duplicated. How to go about this?
Another important factor is Lynda already exits in PERSON table, therefore, i certainly don't want to duplicate her entry.
I tried to write a dynamically changing filename and file type so that i can dump some data. But the code I wrote is not producing any file at all even though it compiles with no errors. I run this code at XE database which comes free from the oracle website. I did all the directory settings. No problem with it because I can produce file with different codes. The code is as following:
CREATE OR REPLACE PROCEDURE dump_csv_file IS
TYPE number_array IS VARRAY(10000) OF NUMBER;
TYPE string_array IS VARRAY(10000) OF VARCHAR2(100);
TYPE date_array IS VARRAY(10000) OF DATE;
TYPE v_file_array IS VARRAY(10000) OF UTL_FILE.FILE_TYPE;
[code]...
we have a prod DB and an Backup DB. I have been asked to copy selected tables from prod Db to anaylsis DB on a weekly basis. Db version is 9i.
Can I use Db links here?, but the data is huge.
I am developing an application for making the travel entries for my organization employees.
For that purpose I have 3 datablocks named:
1) Travel header
2) Employee Detail
3) Travel Detail
which are interlinked through constraints.
I want to give 2 options ie. either single booking entry or Group booking entry.
The form is working properly for single booking entry. But when I want to make a group booking wherein many employees have to travel between common locations I have to fill all the travel details again for all employees. I want to avoid that since it wont give a feasibility for this application. I can copy the travel details I have entered for the 1st employee. I am uploading the form layout.
I have this remote database A and database B. DB A has 10 views and DB B has 10 tables. I have to pull out data from views of DB A and load into tables of DB B at regular intervals. How do I do this job?
View 3 Replies View Related1. I am inserting a value to a table.through uploading the csv file to the DB table using apex.
2. After the data get inserted into the table(parent),my data should be copied to the another table with some conditions .
3. Is it possible to write a trigger to insert statement from selecting the values from another table.
how to copy data and constraints from one table to another table
View 8 Replies View RelatedDB:11.2.0.2.0
Oracle Apps:12.1.3
O/S:AIX 6.1 64 bits
RMAN backup throws the error:
RMAN-06169: could not read file header for datafile 40 error reason 1
RMAN-06169: could not read file header for datafile 41 error reason 1
RMAN-06169: could not read file header for datafile 40 error reason 1
released channel: oem_disk_backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 06/14/2012 07:54:43
[code]...
Could we skip the backup of the above missing files using RMAN -> backup database skip inaccessible;On further research, this would compromise tablespace SYSAUX recoverability...Questions:
1) What caused the above missing files to get created?
2) What is recommended: Recover the datafiles?
i have a table COLOR having alphanumeric fields i.e Color Description & Color Ref. i want to copy the values from Color Description to Color Ref.
what will the select statement for this?
Triggers for oracle database. What I am trying to do is copy original data from one table to another table prior to an update, insert, or delete occurring. Basically we are trying to keep a transactional history, with out having to restore the data. Here is what I have created to date, however it is not executing consistently.
CREATE OR REPLACE TRIGGER DATA_COPY BEFORE
INSERT
OR DELETE
OR UPDATE ON "DB1"."TABLE_1"
[code].......
I have a diskgroup with normal redundancy level (2 two failure groups) working fine. I desire add a new failgroup to diskgroup (changing the redundancy level to high).
Which ASM process will manage the copy of data to new failgroup? Are there some way to control or tuning this process?
i want table data exported to txt file, data is around 3200000,
View 14 Replies View RelatedI have control block. In which user enters two values. Next is data block in which two items have property 'copy value from item' set to 'control block.item1' and 'control block.item2' resp. If thees items are made database items then in execute query will they be sent as parameters in addition to default where clause? if I check last query then query does not hv these parameters but the records returned are already filtered by control block items.
View 1 Replies View RelatedI am very new to oracle and SQL.I am trying to create a store proc that will copy 14 day of data into a table and then truncate the original table. When i compile following code....
CREATE OR REPLACE PROCEDURE STOPROC_TRUNCATE
( dateNum IN NUMBER )
IS
BEGIN
create table AUDIT_14Days as select * from AUDIT where TIMESTAMP >= (SYSDATE - dateNum);
truncate table AUDIT drop storage;
[code]....
i need to copy data from certain table's from one DB to another at random intervals. Table structure for the one's getting copied can be same in both the DB.
After reading various posts here i have understood that it can be done using Oracle Replication and Oracle stream.
how these 2 methods work and how they are different from each other.
I have 2 tables with same no of column and range partition based on date.At the end of month i want to copy the data of one table to another table.Instead of copy the data i want to copy the data of one partition completely to another table partition ..
View 2 Replies View Relatedi have a table with 15 coulums and containing millions of rows which is being updated everyday.Now i have created a similar report table with only the coulums i need to report on from the main table.what plsql script or if there is any better alternative do i need to write to copy the data from the coulums i need from the main table to the new report table. the new report table will be be updated every 01:00am with the data coming from the main table and the update is automated.
View 3 Replies View RelatedI need any good suggestion basically I have two different location
1- Factory
2- Head office
I have developed PRODUCTION module in factory and it is working fine and now I want to send data on daily basis to head office therefore I develop a form which will create backup in export format (.dmp) then user will send via email to head office.
Backup file should be save in pre-defined location then user will use a form which I developed for loading data into head office there are two different buttons in this form;
First is used to load data, actually first I load data in a temporary user which creates whenever user will press this button. Second is used to copy data in application user but first it checks if data exists then update otherwise insert.
We are copying our transaction tables data into another database for our reporting applications (say every day midnight refresh will happen).
The Transaction Database has some 30tables. Existing system is following below points and it is taking 2hours to complete.
1) Truncate data from reporting database (or schema)
2) Direct path Insert into reporting database (or schema) as select * from transaction tables.
3) Rebuild index and Enable constraints.
Note: Each tables data will vary from 30lakhs to 50lakhs. Dump/import/export is not advised by the client.
I want to cut down the time i.e., below 2hours. Instead of above method. Can go for a field in each table specifying the time of each records update/insert operation and then pick the modified records only and copy into reporting db.
I am working on a form having three data blocks
Travel_Inconvineance (Master)
TI_Card_Info (Detail)
TI_Limit_Indemnity (Detail)
On working TI_Card_Info i have 2 columns Plastic_Card_Id and Plastic_Card_Type which i want to be paste on TI_limit_Indemnity data block as i enter in TI_Card_Info.
im on 11G R2 database on linux 5.4, while configuring a physical standby from scratch, remember i dont want to use RMAN, when i copy datafiles from primary to standby, is it necessary to shutdown primary and then copy datafiles ? or i can use SCP command and copy even though primary is up in read write mode?
View 4 Replies View Related