ASMNMP Privileges - Running Dbca And Have Specified Which ASM Disks To Use For Data?
Nov 12, 2010
ASM instance SID = +ASM and the database installation was under SID =rdbms112
Im just in the process of running dbca and have specified which ASM disks to use for data, but then on the next screen of the dbca, im asked for the ASMNMP password,
the password for 'oracle' user is 'oracle' but im getting this message:
"Could not validate ASMNP password due to the following error: "ORA-01031-insufficient privilages" Do you want to continue? If you contiue ASM will not be configured to be moitored by database controll "
when I was asked for privilaged operating system groups when setting up ASM
OSDBA, OSOPER and OSASM ... were all set to group 'dba'
the oracle user is in the 'dba' group
View 2 Replies
ADVERTISEMENT
May 27, 2011
I hv created a database VAHAN with SID VAHAN , now I want to create another database in it with name SARATHI SID SARATHI.VAHAN db is running perfectly but everytime i tried to create the db with dbca it shows error "ORA-01034: ORACLE not avaiable."
I ran dbstart,lsnrctl start - getting same error..i dbshut the db and use startup nomount - getting same error.
View 3 Replies
View Related
Jan 30, 2013
I have installed oracle software on HPUX IA server.After installation, I am trying to create the database using database template through DBCA.After setting database name , password, database file location and sga size on DBCA, DBCA not initializing the database creation after clicking "Finish" button and does not give any error though.I have tried multiple times but not able to create db using specific template using DBCA.
View 10 Replies
View Related
Jan 27, 2012
I'm trying to run dbca in silent mode and works perfect, this is how the code look like:
dbca -silent -createDatabase -templateName Transaction_Processing.dbc -gdbName test.mydomain -sid test
-sysPassword passoracle -systemPassword passoracle -emConfiguration LOCAL -dbsnmpPassword passoracle
-sysmanPassword passoracle -characterSet WE8ISO8859P1
-initParams "open_cursors=500"
The problem is when I specify more than one initialization parameter in -initParams. If I try something like
-initParams "open_cursors=500, parallel_max_server=0"
Then I get this error Exception in thread "main".
View 3 Replies
View Related
Jun 27, 2012
We have Exadata -V2 quarter rack with High Performance Disks. We applied EHCC's various compression methods on some of the table's partitions.
Now we are setting up Exadata Expansion Rack - High Capacity Disks. Post implementation, we would be moving older partitions to new Expansion Rack wherein compressed partitions are also included.
In this case, would there be any impact on the compression ratio as the expansion rack is having high capacity disks.
And, moving partition method would be same as it is for non-exadata database i.e. "alter table <table_name> move partition
<partition_name> tablespace <tablespace_name>"
View 2 Replies
View Related
Jun 19, 2012
I have 11.1.0.7 instance running and got more 300G of storage available for the database. I would like to know what are the steps to add these disks/storage to the existing DATA asm disk group?
View 5 Replies
View Related
Jul 10, 2012
I'm cloning a database from an existing dbca template. The clone is failing with datafile does not exist, because during the copying step, all the datafiles' name are changed, how do I force it to force dbca to keep the same names from the original database?
View 3 Replies
View Related
Aug 28, 2012
i am trying to configure a standby on grid infrstructure, on standby machine when i copied password file from primary i gave it the name orapwdg2 as dg2 is my sid for standby, on primary sid is dg1 and passwd file there is orapwdg1 why it is saying insufficient privileges, i am easily able to connect to primary with dg1 on primary, but not here on standby, everything is set oracle home sid everything but why insufficient privileges
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
[code]....
View 16 Replies
View Related
Jan 10, 2012
I am a new Oracle DBA that has been tasked with creating some single node databases for our programmers to connect to. I have never built a database, only upgraded. I will be using a Dell 610 with 10.2.0.4 software. I have been reading the install guides but cannot find a definitive answer for how to create the raw partitions. I have a SAN that I can utilize and my current db is set up with RAID 6 like so:
Disk 2 300 GB 1 Extended 300 GB and 5 logical, 100MB, 30 MB, 100 GB, 100 GB, 100 GB
Disk 3 100GB 1 Extended 100 GB and 3 logical 100 MB, 30 MB, 100 GB
why the old DBA partitioned this way? I am not good with storage and know that I need to understand before I build new databases so I do not duplicate something that is wrong. I was reading articles that recommend SAME but would not know how to do that on the SAN.
I will be using data pump to export the database and import to the new server. I was looking at using transportable tablespaces to do this. Would you recommend that from the cluster to the standalone?
View 4 Replies
View Related
Oct 21, 2013
Is there any command to identify the disks are HC OR HP ? Indirectly i could find with the following exercise -
$ grep -i MACHINETYPES /opt/oracle.SupportTools/onecommand/databasemachine.xml <MACHINETYPES>X2-2 Half rack</MACHINETYPES> ASMCMD> lsdgState Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files NameMOUNTED NORMAL N 512 4096 4194304 18235392 10597264 2605056 3996104 0 N DATA/MOUNTED NORMAL N 512 4096 4194304 2087680 2085808 298240 893784 0 Y DBFS_DG/MOUNTED NORMAL N 512 4096 4194304 27240192 18871860 3891456 7490202 0 N RECO/ = 45TB >>
[URL] ....... >> Page 5 >> HP SAS disks
View 2 Replies
View Related
Jul 25, 2010
Regarding 11gR2 RAC, ASM, and NFS. Installing 11gR2 Grid Infrastructure and 11gR2 RAC on OEL 5.5 servers with storage supplied by NetApp NFS shares over TCP/Ethernet.
How do I mount NFS file systems as block devices so ASM will use them?
It is my understanding that Linux mounts NFS file systems as anonymous file systems rather than block devices. ASM requires block devices. The only way I know to have Linux treat an anonymous file system mounted over NFS as a block device is to subsequently mount it as a loop device.The Oracle 11gR2 documentation states, "ASM does not support loop devices". Without defining NFS mounts as loop devices, oracleasm createdisk complains the given file on the NFS mounted file system is not a block device when i run
/usr/sbin/oracleasm createdisk DATA /oradata/prod/data/disk01
where /oradata is an NFS mount from a NetApp volume defined in /etc/fstab and disk01 was created with the dd command.I followed the steps in section 3.3.1.2 'Creating Files on a NAS Device for Use with Oracle ASM' of the Oracle guide..
When I use asmca, it does not find any candidate disks with the search path set accordingly.If successfully implemented ASM using NFS shares for database disk groups from a NAS, Steps I followed are below.
In /etc/fstab:
server-ip-address:/vol/data /oradata nfs rw,bg,hard,nointr,tcp,nfsvers=3,timeo=600,rsize=32768,wsize=32768,actimeo=0 0 0
-- mount and verify. /oradata is mounted with specified options.
# mount -a
# mount
[code]...
Command fails with error message "File /oradata/prod/data/disk01 is not a block device." None of the OUIs (grid installer, asmca, or dbca) identify any disks as ASM candidate disks with the search string '/oradata/prod/data/*'. I also tried using '/*', '/oradata/*', '/oradata/prod/data/*' to no avail.
View 4 Replies
View Related
Jan 1, 2013
I am using oel 5.8, oracle 11.2.0.3. The raw disk permissions are getting changed when the node gets rebooted.I am trying to use udev rule to change the permission permanently but its not working.
CODE[root@VM-PAGRAC3 rules.d]# more 99-asm.rules
KERNEL=="sd", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p",*
RESULT=="SATA_VBOX_HARDDISK_VB7a29b7ae-de673b56_",
NAME+="oracleasm/disks/DSK1#" OWNER="grid"
GROUP="asmadmin" MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id -g -u -s %p",
RESULT=="SATA_VBOX_HARDDISK_VB36f5d134-4e0e4c43_",
[code].....
View 8 Replies
View Related
Aug 31, 2011
I have an Oracle database 11.1.0.6 with ASM storage.
SQL> select * from v$version;
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for Solaris: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
There is a disk group named +FRA which has only 1 disk (call it disk 0 for later references).
+FRA disk group is in type of EXTERNAL redundancy
I'd like to add another disk to +FRA disk group and copy all files stored in disk 0 to the new disk (call it disk 1 for ex.), then take off disk 0 (not use for +FRA disk group any more).
Expected result: there is only one disk 1 left in the +FRA disk group, with all the data from disk 0 and keep their original file names
View 5 Replies
View Related
Aug 27, 2011
I am trying to install 2-node 11gR2 RAC on CentOS 5.6 using VMWare Fusion. I'm in the middle of Grid Infrastructure installation and while choosing the ASM diskgroups I don't see any candidate disks but when I click on all disks i can see them but can't select them.
I tried installing the grid before and ended up with and issue running the root.sh on all the nodes so had to deconfigure the grid binaries using the rootcrs.pl and then deinstalled the grid software using the ./desintall utility.
when tried installing again ...I ran the cluvfy utility ..it doesn't show any errors.
View 2 Replies
View Related
Jan 20, 2013
We are in preparation for the purchase of equipment for two- node Oracle10g RAC (on Windows Server 2008) and I need to configure the disks on servers. We have an existing EMC VNX5500 storage and SAN 8Gb switches.
My question is with how many disks to configure servers?Originally we planned four SSD discs (two in RAID 1 for OS and two in RAID 1 for locally Oracle home) for each node/server, and everything else on storage disks (Shared Disks Storage).
Whether it is necessary to have more local disks and for what? Where should be redologs files, archivelogs files, backup files…
Whether it is better server to be configured with six SSD disks:
- two in RAID 1 for OS,
- four in RAID 10 (or RAID 1) for locally Oracle home, archivelogs files, or something else…?
View 6 Replies
View Related
Mar 3, 2012
you have given 500gb of harddisk. how will u implement the size or how to assing the size for disks in the diskgroup.give me the best practice that is used in production
View 1 Replies
View Related
Sep 5, 2013
in a RAC multi-node environment with single instance dataguard..Recovery is not running automatically I have to re-run the recovery command to make them sync and this command works for already archived log files no upcoming archive log file applied I have to re-run the recovery command again for newly archived log files.
View 2 Replies
View Related
Jun 28, 2012
Normally ASMlib/oracleasm is used to prepare the disks for ASM. I just wonder, besides this tool, is there any other GUI based tool to use for preparing the ASM disks?
View 2 Replies
View Related
Oct 17, 2011
Our application has been installed at customers in North America, Europe and South America for several years, in some cases, over 10 years. At least one of our customers has hundreds of gigabytes of data. We are considering options for cleaning out the old data.
The database runs on a variety of systems (Linux, Windows, Unix) and in several version (Oracle 9, 10, and 11). We need a solution that works in all environments.
Two of our main criteria for a successful solution are that:
-It maintains application data referential integrity. Our application makes little use of foreign key constraints, so the cleanup process will apply critical business rules to candidate data to determine if it can be deleted or not.
-The operation of the cleanup program does not impact use of the system in production.
For various reasons (license cost, installation issues) the partitioning option is not available to us.
Alternative 1: Flag records for cleanup
This requires adding a 1-character column to each table. That is a one-time operation done during implementation. The procedure applies the business rules and sets the flag according to whether a row is to be deleted or not. Rows marked for deletion can be checked, reset, exported, etc. Finally, a separate process deletes all marked rows.
Advantage of this is that the deletion process will use a full table scan to find the marked records. There is no index navigation, so hopefully less overhead. Disadvantage is that its updating application data which might affect user's perceived system response. There is some undefined concern that locking or other table activity involved with updating the flags could impact users.
Alternative 2: Build a list of keys for data to be deleted
We will build a list table during implementation. The first process examines the application data, applies the deletion rules and writes key information to the list for data that can be deleted. The list can be checked, reset, rebuilt and listed rows can be exported as required. Finally, the cleanup process uses the list to find and delete the data.
Advantage is that it doesn't update the application data as its building the list. Disadvantages are that it that there is some overhead in building and checking the list. The list requires more space than the flags in alternative 1 but we can handle that in various ways. The procedure needs to navigate key structures during the delete step as well as in the list-building phase.
View 3 Replies
View Related
May 28, 2011
how can i assign permissions to one user to add,delete,edit data and other user should be able to perform all functions or selected functions
View 12 Replies
View Related
Jan 28, 2013
Primary RAC and Standby RAC databases are using version 10.2.0.4. They are configured & controlled via Data Guard Broker. Currently, the observer runs from one of the Standby nodes. All are on Solaris x86 64bit OS version 10.
Now, I have to move Observer to 3rd DC and I am looking If I could use another OS for observer instead of same as DB OS version. Why? Our new infrastructure is on RHEL Linux, therefore, I would like to deploy observer once and then wait for existing databases to be upgraded and moved to RHEL. Also, i understand that database and observer software should be of same version e.g. 10g, 11g.
My question is what if i install & configure observer on RHEL ? The end result would be:
1. Primary DB: Solaris 10, Oracle Software binaries version 10.2.0.4
2. Secondary/Standby DB: Solaris 10, Oracle Software binaries version 10.2.0.4
3. Observer: RHEL 5.8, Oracle Software binaries version 10.2.0.4
Is it accepted mix configuration say e.g. to run for six months? Also, it would be grateful to know if there any license implications when running observer on a different node running no databases at all.
View 2 Replies
View Related
May 10, 2013
I thought this was the easy bit in APEX when you just create a form based on a table, with some validations etc. and use it to insert,update data. However on inserting the first record, I get the following error:
is_internal_error: false
ora_sqlcode: 100
ora_sqlerrm: ORA-01403: no data found
[Code]....
The form is based on a table with a primary key and the primary key is populated from an APEX-generated sequence.
I tried recreating the form, but still no good and now I get the no data error even when clicking "RUN" at page level, so the page does not even display.
View 1 Replies
View Related
Oct 4, 2010
I new to data guard concept.
I am using oracle 10g with data guard configured , I have primary ( A ) and standby database ( B ) .But because of some unavoidable conditions the primary database ( A ) got shutdown and was not starting , We shifted the standby database ( B ) at new location and changed it to primary with following command ,
startup mount;
alter database recover managed standby database finish;
alter database commit to switchover to physical primary;
shutdown;
startup;
This new primary ( B ) was open for end users for 2 days during which old primary ( A ) was shutdown .
I took the backup of ( B ) and restored it on A AND shutdown the B . Now A is acting as Primary database. Server B is shutdown . I want to change server B to standby database with A running as Primary .Is it possible ?
View 5 Replies
View Related
Oct 28, 2011
I was using DBCA to create database in 11g. It goes to the last step ,but was not able to show up database creation screen. I am running it on AIX.
View 1 Replies
View Related
Aug 16, 2013
Why there is default table such as AQ$_INTERNET and other table when I create database with DBCA I want to create commplete blank database
View 4 Replies
View Related
Nov 17, 2013
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
View 0 Replies
View Related
Sep 22, 2011
I am facing a issue on DBCA Installation, when i tried from off-shore.
a. When Iam connecting a server using production / Model VPN , and try to start Installing DBCA Using X11-Forwarding of putty,
b. DBCA installation Started but its tooo Slow, it takes more than 3Hrs (Started at 9AM and ends at 11.17AM)
c. First time it fails and second time its went to success, Whereas when i take alog of server ping request - I am getting a frequent "Requested time out" due to network fluctuation.
So let me know is the network fluctuation affects the Installation through VPN, if So how to overcome and is any workaround on that ?
View 4 Replies
View Related
May 17, 2013
On Windows 7 I've created a DBCA from Script to automate the DB creation of identicall databases.I executed the bat from cmd.exe which I started as Administrator
On script xdb_protocol.sql when catqm.sql was called, the cmd stoped
it asks for a value "Give a value for 4 one:" (In german actually "Geben Sie einen Wert f³r 4 ein:" )
http://img62.imageshack.us/img62/1145/tempin.jpg
Its for *:user_opt_secfiles := '&4'*; shall be YES or NO it doesnt auto-set. What shall I put?
[code]....
View 5 Replies
View Related
Jul 15, 2010
I am learning to create an ASM (Automatic Storage Management) instance using dbca.
View 3 Replies
View Related
Jun 15, 2011
when i am trying to create a new database in oracle 10 g in my local system when creating database error shows a number 146 no other error is showing what must be the reason.
View 14 Replies
View Related
