I am getting below in alert log:
Deprecated system parameters with specified values:
remote_os_authent
IS this parameter is supportable in 11G and also how can i remove it from SP file with out bouncing the instance.
Today, I've got an error:
$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Nov 17 09:45:50 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
idle> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/DOISOAT/spfileDOISOAT.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/DOISOAT/spfileDOISOAT.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
idle> exit
SP2-0042: unknown command "exit" - rest of line ignored.
idle> exit
Disconnected
First time, I tried to recreate spfile from pfile, however, it - the errors continued to occur. And I searched in metalink, so, I've got ID 387217.1. I've been beging followed:
1- Check the REQUIRED_RESOURCES was listed by crs_stat -p command, wasn't it? Then, the REQUIRED_RESOURCES did not contain anything
2- Modify by Metalink comment solution:
srvctl modify instance -d <database name> -i <instance name> -s <ASM instance name>
Everything is done, however, I still did not startup database instance. The above error continued, and I force to stop all by crs_stop -all.
While configuring Data Guard as I have inserted following parameters in SPFILEPRMDB.ora (PRMDB is Primary DB).
*.db_unique_name='PRMDB'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(PRMDB,STLDB)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:oracleproduct10.2.0flash_recovery_areaPRMDBARCHIVELOG VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRMDB'
*.LOG_ARCHIVE_DEST_2='SERVICE=STLDB LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STLDB'
[code]....
when I SQL> shutdown immediate; and SQL> Startup;
Oracle gives me following Error
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'C:ORACLEPRODUCT10.2.0DB_1DATABASE
INITPRMDB.ORA'
When I Restored old spfileprmdb.ora without these parameters then it Starts Up Normally.
I had newly installed oracle 11g database, for testing & learning purpose.
Don't know wht happen to it after successfull installation , I am not able to start database.
Following error is appearing, how to resolve this.
Ora-01078:failure in processing system parameters
I can do only login to idle instance.
I am learning how to clone database using cold backup.
I have copied all datafile ,redofile and also created control file but I am getting error while inititialisation of my clone(CVM) instance.
SQL> startup nomount pfile=C:ORACLEPRODUCT10.1.0DB_1DATABASEINITCVM.ORA;
LRM-00109: could not open parameter file 'C:ORACLEPRODUCT10.1.0DB_1DATABASE
INITCVM.ORA'
ORA-01078: failure in processing system parameters
but I have copied this file to C:ORACLEPRODUCT10.1.0DB_1DATABASE location but still giving me error.
I have a small problem with creating the SPFILE,
These are the commands i had issued :-
1. startup nomount
2. create SPFILE from PFILE ;
Then i got an error :-
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'C:ORACLEORA92DATABASEINITORCL.ORA'
Ever since this happened i am unable to connect to ORACLE under any schema !
I get the following error : -
SQL> conn scott/tiger
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Warning: You are no longer connected to ORACLE.
WHY DOES THIS HAPPEN AND HOW CAN I OVERCOME IT ?
I am trying to create standby database on second machine ie. not on my machine. For this i have made added the required parameters in the pfile of the primary database but when I am trying to startup the database using the new pfile I am receiving some errors.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount pfile='E:oracleproduct10.2.0db_1databaseinitden1.ora'
LRM-00101: unknown parameter name 'L0G_ARCHIVE_DEST_2'
ORA-01078: failure in processing system parameters
SQL>
Below are the parameters of my pfile:
*.core_dump_dest='E:oracleproduct10.2.0/admin/den/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='den'
*.db_recovery_file_dest='E:oracleproduct10.2.0/flash_recovery_area'
[code]....
I successfully created a DB manually with PFILE.
I want the DB to startup with SPFILE at next login.So i fired the below command.
CREATE SPFILE='path/SPFILEPRAGAT.ORA' FROM PFILE='path/file.ora'.
But it shows the error as below:
ORA-01078: failure in processing system parameters
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (os 123) The filename, directory name,or volume label syntax is incorrect.
CREATE TABLE t2
(
id NUMBER,
ename2 VARCHAR2(20),
sal2 NUMBER,
job2 VARCHAR2(20),
conid NUMBER
[Code]...
My requirement is like when I am calling the procedure P1 with some values then it should check the table "t2".And table "t2" is linking with table "t3".
So what ever the column "verify" is there, it should check the incoming values against it. If matches success otherwise reject it.Later the incoming values is stored different tables.I am doing it in the above way by hard coding some value.
BEGIN
p1(1,'MILLER',500,'ADMIN'); --REJECT
p1(1,'MILLER',5000,'ADMIN'); --ACCEPT
P1(2,'MILLER',5000,'SALESMAN');--ACCEPT
END;
Lets say you're making upa school database and you awnted to give the students each a unique student number generated by thesystem.
View 2 Replies View Related*10g Oracle installation on OEL*
How Kernel Parameters values calculated in 10g
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
+# semaphores: semmsl, semmns, semopm, semmni+
kernel.sem = 250 32000 100 128
[code].......
Run the following command to change the current kernel parameters
/sbin/sysctl -p
** "/etc/security/limits.conf" **
* soft nproc 2047
* hard nproc 16384
* soft nofile 1024
* hard nofile 65536
My question I think 32 bit or 64 bit OS calculation will be same only. I want know how it was calculated ?
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
I have a form which has few textboxes, and few dropdown, and 3 links. Data is entered in few boxes, and then when a link is clicked, it goes to another page, but i want to pass the text in the text boxes, and the selected value from the dropdown also, to be passed as parameters to this link... But since these values are not yet saved, its not getting passed.. like it is something like this in the address bar add_new_event?&event_ id= &event_ name= & event_dt=
How to pass null values in OracleCommand as a parameters
i am doing like this
((OracleCommand)cmdMySql).Parameters.Add(":1" ,Varchar2).Value = DBNull.Value;
Its giving error when dataadapter is going to fill.
Just to let you know this new section in SQL*Plus FAQ wiki page: How to have optional parameters and default values in SQL*Plus_script.
View 1 Replies View RelatedNot able to open login page 101 in my internal application. I am getting below error
ORA-12170: TNS:Connect timeout occurred
Error Not able to get parameters values
OK
I studied a document about lexical parameter in that it says "Lexical parameters are used to substitute multiple values at run time and are identified by a preceding '&'. Lexical s can consist of as little a one line where clause to an entire select statement"
Select * from emp, deptno &where.
and i know about substitution variables using & is this are same (lexical and substitution) or different.
I am having Oracle 10g - 10.2.0.1.0 version. When I am starting my Database I get the following message:
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
I want to know which parameter in my PFile is obsolete and what is the New Parameter replaced for that.
********************************************************************************
D:\>sqlplus / as sysdba
********************************************************************************
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Oct 22 16:26:40 2010
Copyright © 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
********************************************************************************
SYS AS SYSDBA in MyDB....> startup
********************************************************************************
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORACLE instance started.
Total System Global Area 612368384 bytes
Fixed Size 1250428 bytes
Variable Size 121637764 bytes
Database Buffers 482344960 bytes
Redo Buffers 7135232 bytes
Database mounted.
Database opened.
SYS AS SYSDBA in MyDB....>
********************************************************************************
PFILE.ORA
********************************************************************************
*.db_name='MYDB'
*.db_unique_name='MYDB'
MYDB.__db_cache_size=473956352
MYDB.__java_pool_size=4194304
MYDB.__large_pool_size=4194304
MYDB.__shared_pool_size=121634816
[code]....
*******************************************************************************
While debugging an APEX 4.2 application today, I noticed a debug line DEPRECATED: public_check_authorizationwhen using APEX_UTIL.public_check_authorization in a before header PL/SQL process.
why this line appears? The documentation doesn't point out that this function is deprecated or is going to be this in the near future.
I am getting the following error while starting database.
ORA-32004:obsolete and/or deprecated parameter(s) specified
i try to startup a database, and get that obsolete/deprecated parameter specified(ORA-32004: obsolete and/or deprecated parameter(s) specified)so i try to reset the parameter, but it seems it is already reset(not in spfile), so maybe this is in memory. SO now i try to reset with scope = memory or both, it gives this error(ORA-32029: resetting with SCOPE=MEMORY or SCOPE=BOTH is currently not supported).
what to do, because now i cannot reset with scope = memory and in spfile it is not there but still it comes in deprecated parameter.
On my APEX page i have region which has sql query as source and it displays as HTML table the query result to the user.
I want to display addinonal column with a hyperlink inside, and that hyperlink would have CGI/URL-parameters which contains the other values of the HTML row.
So, let's say my APEX region queryes columns as "select c1, c2, c3, c4 ..." and displays out values "V1, V2, V3, V4" then i want to have addional output column with such hyperlink:
a href="f?p=100:7:13467554876288::NO::c1,c2,c3,c4:v1,v2,v3,v4">My link column with CGI-parameters</aHow can i create such hyperlink?
The overall idea is that the link would forward to a page which loads those values "v1,v2,v3,v4" into form fields and user can proceed from there.
---
"Application Express 4.2.1.00.08"
i write a select statement in proc that contains 44 columns.
when i precompile it. it is showing the error: implicit conversion of string literal to "char *" is deprecated.when i compile the same select with 40 columns it is not showing any error.
but for more than 40 columns (41-44) it is showing the above error.
We have system.current_item and system.cursor_item.....
both represent the same....
like this we have few other system variables also .....
what is the main difference between current_item and cursor_item?
couple of questions about below parameters, do they measure single processor or avg usage across all processorss and cpus for example will i recieve alert if CPU system time goes above 95% for single processors? or not
CPU Idle Time (%)
CPU System Time (%)
CPU User Time (%)
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
View 4 Replies View RelatedI have a scenario where I have to get all the available dates of a resource. I am using the below query to get it.
Select Avail_Date AS MONTH
, Resource_Id
FROM res_tsk
, (SELECT Rownum - 1 + TRUNC (sysdate) avail_date
FROM Dual
[code].......
The result of this is:
Month Dates Resource_ID
12/3/10 0:00 NULL
12/4/10 0:00 NULL
12/5/10 0:00 NULL
12/6/10 0:00 100033868
As I am doing a outer join, if the resource is not available on a particular day the resource_id is coming as NULL as it is not available. Is there any way to populate this NULL resource_id with the original resource_id as the resource_id is same for all the result set.
I need the output to be
Month Dates Resource_ID
12/3/10 0:00 100033868
12/4/10 0:00 100033868
12/5/10 0:00 100033868
12/6/10 0:00 100033868
My scenario is to insert values into 'out' column by comparing 's' and 'IP' columns of temp table.The exact situation is at first need to go to ip column,take a value and then go to source column and check for the same value of ip which is taken previously.Then after corresponding ip of that source column should be inserted back in previous source column.
The situation is marked clearly in file which i am attaching with '--' comments at respective places.I am also pasting the code which i tried out,unfortunately it is giving error as exact fetch returns more than requested number of rows since there are duplicates in the table.I tried it using nested for loops.Also implemented using rowid,but it didnt work.
fixing the errors or if there is any new logic that can be implemented.
DECLARE
i_e NUMBER(10);
BEGIN
FOR cur_1 IN(SELECT IP from temp where IP IS NOT NULL)
LOOP
FOR cur_2 IN(SELECT IP from temp where s=cur_1.IP)
[Code]...
I am searching the simplest way for ad hoc MINUS.I do:
SELECT *
FROM uam_rss_user_XXXXXXX
WHERE host_name IN
('XXX0349',
'XXX0362',
'XXX0363',
'XXX0343',
'XXX0342',
'XXX0499',
[code]....
and look in the table which values are missing (values that are in host_name IN but not in actual table).is there a simpler way for doing an ad hoc MINUS? I know to insert values in temp. Table. How are experienced Oracle pros doing this task?
From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?
View 2 Replies View RelatedOracle Version:11.2.0.3/ OEL 6.1
For diagnosing a performance issue related to a batch run, our application teams wants to know all session/system level parameter that affects SQL performance. I can't simply give an output of v$parameter.name and v$parameter.
value as there will lots of parameter not related SQL performance like
diagnostic_destlog_archive_dest_1deferred_segment_creationcontrol_filesbackground_core_dump
I am looking for only those parameters which are relevant to SQL performance, like
optimizer_modestatistics_levelmemory_targetsga_target
