Data Guard :: Standby Database - Failure In Processing System Parameters
Dec 6, 2010
I am trying to create standby database on second machine ie. not on my machine. For this i have made added the required parameters in the pfile of the primary database but when I am trying to startup the database using the new pfile I am receiving some errors.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup nomount pfile='E:oracleproduct10.2.0db_1databaseinitden1.ora'
LRM-00101: unknown parameter name 'L0G_ARCHIVE_DEST_2'
ORA-01078: failure in processing system parameters
SQL>
Below are the parameters of my pfile:
*.core_dump_dest='E:oracleproduct10.2.0/admin/den/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='den'
*.db_recovery_file_dest='E:oracleproduct10.2.0/flash_recovery_area'
[code]....
View 10 Replies
ADVERTISEMENT
Apr 15, 2013
While configuring Data Guard as I have inserted following parameters in SPFILEPRMDB.ora (PRMDB is Primary DB).
*.db_unique_name='PRMDB'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(PRMDB,STLDB)'
*.LOG_ARCHIVE_DEST_1='LOCATION=C:oracleproduct10.2.0flash_recovery_areaPRMDBARCHIVELOG VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRMDB'
*.LOG_ARCHIVE_DEST_2='SERVICE=STLDB LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STLDB'
[code]....
when I SQL> shutdown immediate; and SQL> Startup;
Oracle gives me following Error
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'C:ORACLEPRODUCT10.2.0DB_1DATABASE
INITPRMDB.ORA'
When I Restored old spfileprmdb.ora without these parameters then it Starts Up Normally.
View 1 Replies
View Related
Feb 8, 2011
I successfully created a DB manually with PFILE.
I want the DB to startup with SPFILE at next login.So i fired the below command.
CREATE SPFILE='path/SPFILEPRAGAT.ORA' FROM PFILE='path/file.ora'.
But it shows the error as below:
ORA-01078: failure in processing system parameters
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (os 123) The filename, directory name,or volume label syntax is incorrect.
View 20 Replies
View Related
Nov 16, 2010
Today, I've got an error:
$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Nov 17 09:45:50 2010
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
idle> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/DOISOAT/spfileDOISOAT.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/DOISOAT/spfileDOISOAT.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
idle> exit
SP2-0042: unknown command "exit" - rest of line ignored.
idle> exit
Disconnected
First time, I tried to recreate spfile from pfile, however, it - the errors continued to occur. And I searched in metalink, so, I've got ID 387217.1. I've been beging followed:
1- Check the REQUIRED_RESOURCES was listed by crs_stat -p command, wasn't it? Then, the REQUIRED_RESOURCES did not contain anything
2- Modify by Metalink comment solution:
srvctl modify instance -d <database name> -i <instance name> -s <ASM instance name>
Everything is done, however, I still did not startup database instance. The above error continued, and I force to stop all by crs_stop -all.
View 1 Replies
View Related
Feb 25, 2010
I had newly installed oracle 11g database, for testing & learning purpose.
Don't know wht happen to it after successfull installation , I am not able to start database.
Following error is appearing, how to resolve this.
Ora-01078:failure in processing system parameters
I can do only login to idle instance.
View 9 Replies
View Related
Feb 19, 2012
I am learning how to clone database using cold backup.
I have copied all datafile ,redofile and also created control file but I am getting error while inititialisation of my clone(CVM) instance.
SQL> startup nomount pfile=C:ORACLEPRODUCT10.1.0DB_1DATABASEINITCVM.ORA;
LRM-00109: could not open parameter file 'C:ORACLEPRODUCT10.1.0DB_1DATABASE
INITCVM.ORA'
ORA-01078: failure in processing system parameters
but I have copied this file to C:ORACLEPRODUCT10.1.0DB_1DATABASE location but still giving me error.
View 9 Replies
View Related
Oct 11, 2004
I have a small problem with creating the SPFILE,
These are the commands i had issued :-
1. startup nomount
2. create SPFILE from PFILE ;
Then i got an error :-
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file 'C:ORACLEORA92DATABASEINITORCL.ORA'
Ever since this happened i am unable to connect to ORACLE under any schema !
I get the following error : -
SQL> conn scott/tiger
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Warning: You are no longer connected to ORACLE.
WHY DOES THIS HAPPEN AND HOW CAN I OVERCOME IT ?
View 8 Replies
View Related
May 10, 2011
After switchover the primary is now standby and standby is now primary, the clients are unable to connect to new primary database.
TNSNAMES.ora file at client side...
prim.world=
(DESCRIPTION_LIST=
(FAILOVER=true)
[Code].....
SQL> conn iq/iq@prim.world
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
SQL> conn sys/ora123@prim.world as sysdba
Connected.
SQL> select open_mode from v$database;
OPEN_MODE
--------------------------------------------------------------------------------
MOUNTED
SQL> select database_role from v$database;
DATABASE_ROLE
--------------------------------------------------------------------------------
PHYSICAL STANDBY
SQL>
--------------------------------------------------------------------------------
It's Oracle 10.2.0.1.0 version....
View 11 Replies
View Related
Oct 17, 2012
We are planning to create physical standby database for 4-node RAC primary to a 4-node RAC standby using Active database duplicate with ASM and OMF
1. while using active database duplicate, do we need to set cluster_database=FALSE in spfile clause and create standby,next change it back to TRUE at standby. Or we don't need to touch it. And also do we need to include instance_number parameter
2. We are using OMF, can we use log_file_name_convert parameter in spfile clause of duplicate. Documentation says log_file_name_convert cannot be used if standby is going to have OMF. Because we have 5 groups for each thread, which are on 5 different disk groups. When standby is created all the logs are created in only one disk group pointed by db_create_online_file_dest_1.
3. To enable force logging at primary do we need to shutdown the database?
View 3 Replies
View Related
May 26, 2013
I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
View 5 Replies
View Related
Oct 17, 2012
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
View 1 Replies
View Related
Sep 29, 2012
I am going to change some parameters on primary database (db cache, java pool etc.). I am not sure, if the changes are automaticallly propagated to standby or if I have to make the changes manually on stanby site too? I couldn't find clear answer in documentation. how parameter changes work in dg physical configuration?
View 2 Replies
View Related
Apr 22, 2011
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
View 2 Replies
View Related
Aug 30, 2013
If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
View 1 Replies
View Related
Mar 14, 2012
I want to get the execute plan of a sql in standby database(read only),but failed,how can i do?
SQL> explain plan for select count(1) from hxl.tb_objects;
explain plan for select count(1) from hxl.tb_objects
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-16000: database open for read-only access
SQL> select count(1) from hxl.tb_objects;
COUNT(1)
----------
22238018
SQL> select open_mode from v$database;
OPEN_MODE
----------
READ ONLY
View 4 Replies
View Related
Mar 10, 2010
I have two node rac running on SAN with ASM , i want to configure a single instance standby database for this.
View 2 Replies
View Related
Jul 8, 2011
To have physical standby database, the hardware and software versions should be same, including patch sets?
View 3 Replies
View Related
Sep 17, 2012
DB1 <Primary> - Production
DB2 <Physial Standby> - DR
I will need to startup my DB2 in DR segment for testing.If i perform the below, will it affect my Production DB? I need it to be up and running as well.
DR:
recover managed standby database cancel;
shutdown immediate;
startup nomount;
alter database mount standby database;
recover standby database until cancel;
alter database activate standby database;
View 11 Replies
View Related
Sep 7, 2012
Oracle RDBMS 11.2.0.2 on RHEL 5.6.
I need to drop standby database completeley and rebuilt physical standby for the same database. We identified there are lot of inconsistencies between primary and standby. How do i need to remove the standby? And what is the best procedure?
View 2 Replies
View Related
Dec 7, 2010
I was able to create the standby database on different server with the same name for the primary and standby database but I want to know that can I create a standby database with different database name than that of the primary database server.
View 1 Replies
View Related
Dec 21, 2012
creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
View 1 Replies
View Related
Jan 30, 2013
I have installed oracle 11g standard edition one and created both primary and standby database. now i want to know how to switch(convert) primary database to standby database.
View 8 Replies
View Related
Jan 16, 2013
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
View 1 Replies
View Related
Jan 16, 2013
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
View 31 Replies
View Related
Apr 19, 2011
During data guard configuration i have receive an error while connecting to stanby database from primary database rman prompt.
rman target sys/srk786@orcli
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Apr 19 09:59:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: ORCLI (DBID=3754068166)
RMAN> connect auxiliary sys/srk786@stnd
[code]....
View 1 Replies
View Related
Feb 2, 2013
I was using physical standby but my primary database had had some HW issue.So I had activated standby database to handle production.During 3 months, standby database was our live database and our old primary was unavailable.Now HW issue on primary has been fixed.And I want to set again my old configuration : means set primary and standby db.
I'm trying this :
1) check the SCN on old primary
2) Rman incremantal backup from scn
3) on primary db : catalog
4) on primary db : recover database noredo
View 1 Replies
View Related
Apr 4, 2012
how to create the standby database on the same machine. os-window xp 2000(32 bit window) oracle 10g 10.2.0.1.0.
View 4 Replies
View Related
Feb 18, 2012
How can i define the logfile of standby database when using then duplicate database to create the standby database? the flowing command can not run.
run{
duplicate target database for standby dorecover nofilenamecheck
logfile group 1 ('/u01/app/oracle/oradata/oracl/redo1_1.log','/u01/app/oracle/oradata/oracl/redo1_2.log') size 512M,
group 2 ('/u01/app/oracle/oradata/oracl/redo2_1.log','/u01/app/oracle/oradata/oracl/redo2_2.log') size 512M,
group 3 ('/u01/app/oracle/oradata/oracl/redo3_1.log','/u01/app/oracle/oradata/oracl/redo3_2.log') size 512M;
}
View 3 Replies
View Related
Nov 23, 2011
I have set up a single instance standbys for rac databases. Now, I need to offload the backups from the primary on to the standbys.
1. cancel managed recovery
2. connect to target(standby) and catalog and backup the standby
3. put standby in managed recovery mode.
I think following these steps, I can restore primary(?). Now, My question is, how can I use these standby backups to clone/refresh databases? I tried it by connecting to target(primary), catalog and auxiliary but rman is using the primary backups instead of standby's to refresh the auxiliary database.
View 7 Replies
View Related
Mar 31, 2011
i have done oracle data guard between two databases (database A is the primary) and (database B is the standby), and it was working fine for two weeks, then the network admin did some changes on the firewall on standby side, which made the primary database can not write on standby redo log , so archives was generated on primary and do not generated on standby by, now we solve the firewall probelm and new archives generated on primary is generated on atandby too, but now i have a gap in archives on standby database and standby database now is not synchronized with primary database, and data changes happen on primary is not reflected on standby, also archives that were generated on primary and did not generated on standby during the problem time is not registered in V$ARCHIVED_LOG neither on primary database nor on standby database
View 1 Replies
View Related
