I have a form in which the fields are calculated fields. So i need to populate the form after calculating the values based on a database columns. For example if i have a table as below
COL A | Col B | Col C | Col D 2 3 4 5 3 4 5 6
I have 3 fields on my form which i need to populate such that field1 maps to col A. Field2 value is COL B * COL D for that value of COL A. Field 3 value is COLB * COL D for that value of col A.
I tried something like this
PROCEDURE NAME IS
cursor c1 is SELECT * FROM TABLEL; begin go_block('Block1'); clear_block(no_validate); for i in c1 loop :BLOCK.field1 := i.COL_A; [code].......
this fetched all the records for field1 but for field2 and field3 it only calculates and populates the field row.
CREATE TABLE t2 ( id NUMBER, ename2 VARCHAR2(20), sal2 NUMBER, job2 VARCHAR2(20), conid NUMBER
[Code]...
My requirement is like when I am calling the procedure P1 with some values then it should check the table "t2".And table "t2" is linking with table "t3".
So what ever the column "verify" is there, it should check the incoming values against it. If matches success otherwise reject it.Later the incoming values is stored different tables.I am doing it in the above way by hard coding some value.
BEGIN p1(1,'MILLER',500,'ADMIN'); --REJECT p1(1,'MILLER',5000,'ADMIN'); --ACCEPT P1(2,'MILLER',5000,'SALESMAN');--ACCEPT END;
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production PL/SQL Release 11.1.0.6.0 - Production "CORE 11.1.0.6.0 Production"
I have a form which has few textboxes, and few dropdown, and 3 links. Data is entered in few boxes, and then when a link is clicked, it goes to another page, but i want to pass the text in the text boxes, and the selected value from the dropdown also, to be passed as parameters to this link... But since these values are not yet saved, its not getting passed.. like it is something like this in the address bar add_new_event?&event_ id= &event_ name= & event_dt=
I studied a document about lexical parameter in that it says "Lexical parameters are used to substitute multiple values at run time and are identified by a preceding '&'. Lexical s can consist of as little a one line where clause to an entire select statement"
Select * from emp, deptno &where.
and i know about substitution variables using & is this are same (lexical and substitution) or different.
In my table there are 188 column , i compare these with other table to know which column values have changed. i use ora_hash to get hash value and then i compare with other table.
I want to create calculated column but i am unable to create as it says invalid data type.
On my APEX page i have region which has sql query as source and it displays as HTML table the query result to the user.
I want to display addinonal column with a hyperlink inside, and that hyperlink would have CGI/URL-parameters which contains the other values of the HTML row.
So, let's say my APEX region queryes columns as "select c1, c2, c3, c4 ..." and displays out values "V1, V2, V3, V4" then i want to have addional output column with such hyperlink:
a href="f?p=100:7:13467554876288::NO::c1,c2,c3,c4:v1,v2,v3,v4">My link column with CGI-parameters</aHow can i create such hyperlink?
The overall idea is that the link would forward to a page which loads those values "v1,v2,v3,v4" into form fields and user can proceed from there.
I have seen in probably VB or Dot net software being used at some premises that there "formula computation is live and interactive".
What i means that suppose a cashier has made invoice having total of 83$. Mow in the text box for entering amount received, the cashier is about to enter 100 but surprisingly the returned value/remaining value (total invoice - amount received) is being computer LIVE.
This is what happens.
1) The cashier entered 1 and the remaining value instantly showed 82 (83-1) 2) then on other key stroke of 0 by cashier and then then the remaining value instantly showed 73 (83-10) 3) then on other key stroke of 0 by cashier and then then the remaining value instantly showed 17 (83-100)
Hence a continuous updation/changing of the remaining value on every key stroke is observed.
I want to insert calculated data while loading the data from sql loader.
eg let say column INTERNAL_TRANSACTION_ID,WAIT_TIME,MESSAGE_GUID,TRS_SIZE,RETURN_MESSAGE_GUID are null in input file then i want to populate column DEV_FLAG as 'U' ELSE 'D'
My control file looks like below but doesn't have DEV_FLAG.
load data BADFILE '/backup/temp/rajesh/RIO/BadFiles/FILENAME' append into table TEMP_rio_RESP_TIME_LND TRAILING NULLCOLS ( INSTALLATION_ID CHAR TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"', TRANSACTION_ID CHAR
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
As I am doing a outer join, if the resource is not available on a particular day the resource_id is coming as NULL as it is not available. Is there any way to populate this NULL resource_id with the original resource_id as the resource_id is same for all the result set.
My scenario is to insert values into 'out' column by comparing 's' and 'IP' columns of temp table.The exact situation is at first need to go to ip column,take a value and then go to source column and check for the same value of ip which is taken previously.Then after corresponding ip of that source column should be inserted back in previous source column.
The situation is marked clearly in file which i am attaching with '--' comments at respective places.I am also pasting the code which i tried out,unfortunately it is giving error as exact fetch returns more than requested number of rows since there are duplicates in the table.I tried it using nested for loops.Also implemented using rowid,but it didnt work.
fixing the errors or if there is any new logic that can be implemented.
DECLARE i_e NUMBER(10); BEGIN FOR cur_1 IN(SELECT IP from temp where IP IS NOT NULL) LOOP FOR cur_2 IN(SELECT IP from temp where s=cur_1.IP)
I am searching the simplest way for ad hoc MINUS.I do:
SELECT * FROM uam_rss_user_XXXXXXX WHERE host_name IN ('XXX0349', 'XXX0362', 'XXX0363', 'XXX0343', 'XXX0342', 'XXX0499', [code]....
and look in the table which values are missing (values that are in host_name IN but not in actual table).is there a simpler way for doing an ad hoc MINUS? I know to insert values in temp. Table. How are experienced Oracle pros doing this task?
From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?
For diagnosing a performance issue related to a batch run, our application teams wants to know all session/system level parameter that affects SQL performance. I can't simply give an output of v$parameter.name and v$parameter.
value as there will lots of parameter not related SQL performance like
I created a package with some types, and every was compiling fine. However, when I ran the new function, I got an error: ORA-21700: object does not exist or is marked for delete
After a little research, I realized that the types would have to be declared outside the package. As soon as I did that, I suddenly started getting the "not enough values" errors on all my types. I compared the number of columns being returned, and the number of columns in the type, and they match.Here is my type code:
CREATE OR REPLACE TYPE TSA_CUSTOM.Lost_Plan as object ( LP_Key number, -- The member key of the plan that is going away LP_Type varchar2(20), LP_Dept varchar2(12), LP_SubDept varchar2(12), LP_Class varchar2(12), LP_VendorName varchar2(50) [code]...
I want to ask that how can I use parameters in forms? I have created 2 parameter pm_rollnum and pm_classname but I don't that how I use it in form that when end user enter its value in these parameter result should be open.
I just upgraded my version of my oracle from 9 to 11.2g.When I tried to execute some queries in PL/SQL i keep getting an annoying error : "ORA-01843 not a valid month."
I realized that if I execute the following query:alter session set NLS_DATE_LANGUAGE=AMERICAN;before every query that I want to execute, then it's executed fine.
I preformed the next queries: 1. select * from nls_database_parameters; 2. select * from nls_instance_parameters; 3. select * from nls_session_parameters;
and I saw that the fields in the "nls_session_parameters" vieware not derived from "nls_database_parameters" "nls_instance_parameters".
How can I derive the parameters from the instancedatabase view into the session view?I want that the "nls_date_language" parameter will always be 'AMERICAN'.
select a.in_house_ref from media_item a where ((&rack is null) or a.in_house_ref in (&rack)); --a.house_media in ('CH127600','BF101042'), example values
I've tried the a.in_house_ref in (:rack) by itself and that doesn't work for the values above and hence changed it to (&rack) and that works. The issue I run into now is that the the paramater can be null, ie., no values need be entered by users and hence I put the is null statement. When I run the full statement above, oracle returns an error, i.e. , ORA-00936: missing expression.