I'm in the process of making a list of changes. What database application changes would be classified as standard changes and would not require a CAB meeting and which ones would be deemed critical that a CAB meeting would be required before going ahead with the change.
View 2 Replies
We have 5 node RAC database. I want to user 2 node for OLTP and 3 for DSS system. Guide now to create service for the requirement.
View 10 Replies View RelatedSun Solaris 10, Oracle 11gr2 x86 How are you doing? I am trying to build a test system. I never build ASM before. if I need to install database first then Migrating to ASM? The other problem I am having is that I only have a Raw disk. I have one disk for root and oracle and the other one for Raw disk for ASM. Do you know it's possible to build ASM on 1 raw disk?
View 3 Replies View RelatedWe have standalone database running on ASM. Its 11Gr2 linux version5 server. After the Database bounce, the DB isnt coming up and is showing the below error.
SQL> startup nomount
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/test/spfiletest.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/test/spfiletest.ora
ORA-15056: additional error message
ORA-17503: ksfdopn:2 Failed to open file +DATA/test/spfiletest.ora
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-00450: background process 'ASMB' did not start
ORA-00443: background process "ASMB" did not start
ORA-06512: at line 4
Also i checked the ASM disk groups. I can see all those are MOUNTED properly. In fact i could also see the spfile present in ASM disk physically. It looks like it couldn't identify the spfile to start up the db. however i could see it physically present in ASM disk group.
Find below snapshot.
State Type Rebal Sector Block AU Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files Name
MOUNTED EXTERN N 512 4096 1048576 358400 329103 0 329103 0 N DATA/
MOUNTED EXTERN N 512 4096 4194304 358368 358288 0 358288 0 N FRA/
MOUNTED EXTERN N 512 4096 4194304 20480 18780 0 18780 0 N REDO/
I cannot start ASM on my Oracle Database Appliance.
crsctl status resource -t says:
ora.asm
ONLINE ONLINE node1 Started
ONLINE ONLINE node2 Started
however, if I try to access the ASMCMD it says:
[grid@node1 ~]$ asmcmd
Connected to an idle instance.
ASMCMD> startup
ORA-00304: requested INSTANCE_NUMBER is busy
Connected to an idle instance.
I am using 10.2.0.1 on OEL5. I have installed CRS, Oracle home, ASM on both nodes and everything is fine.
When invoked dbca to create a database, it says:
*'DBCA could not startup the ASM instance configured on this node. To proceed with database creation using ASM you need the ASM instance to be up and running. Do you want to recreate the ASM instance on this node?'*
Is it a bug? because some blogs say this is a bug. And patch 8288940 will solve this. They also say this patch is to solve the incompatibility between 11g ASM incompatibility with 10g. But here I am using everything of 10.2.0.1.
Error occurred, While installing the agent in 11g database.
Error is listed below
[oracle@grid agent]$./agentDeploy.sh AGENT_BASE_DIR=/ebiz/oracle RESPONSE_FILE= agent.rsp
AGENT_BASE_DIR=/ebiz/oracle
Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /ebiz/oracle/core/12.1.0.1.0/jdk/bin/java -classpath /ebiz/o
[code]./..
Executing agent install prereqs... Executing command: /ebiz/oracle/core/12.1.0.1.0/oui/bin/runInstaller -ignoreSys rereqs -prereqchecker -silent -ignoreSysPrereqs -waitForCompletion -prereqlogl c /ebiz/oracle/core/12.1.0.1.0/cfgtoollogs/agentDeploy -entryPoint oracle.sysma .top.agent_Complete -detailedExitCodes PREREQ_CONFIG_LOCATION=/ebiz/oracle/core 12.1.0.1.0/prereqs -J-DORACLE_HOSTNAME=grid.4iapps.com -J-D
[code]...
Db : 11.2.0.3
Os :Aix
We have 3 database under an ASM on same machine.Each db has 2 disk group's.
Db Name :DT6
DT6_DATAGROUP01/
DT6_REDOGROUP01/
Db Name :DT7
DT7_DATAGROUP01/
DT7_REDOGROUP01/
Db Name :DT8
DT8_DATAGROUP01/
DT8_REDOGROUP01/
How these database instance correctly identify the disk group? Can we use two database instance for One disk group?
how to implement change notification database in oracle forms?
I want to display some data to user،when change a table in database . now Can i do this work with change notification database in oracle form10g?
how can i change my oracle database language
View 6 Replies View RelatedCurrently my oracle database character set is we8mswin1252 and it is only containing English data as well as spatial data (which is in English of course). I would like to change the Database character set so it could accept Arabic characters.
I have checked the below command on a test DB and it worked fine, but I want to know if it's recommended as a best practice when changing the character set to accept arabic and this won't corrupt my old entered Data ?
SHUTDOWN IMMEDIATE
STARTUP RESTRICT
ALTER DATABASE CHARACTER SET INTERNAL_USE AR8MSWIN1256
SHUTDOWN IMMEDIATE
STARTUP
i have a oracle server installed enterprise edition, for some reation i need to degrade the version from enterprise to standard
i need same tablespace,data's everything same as of now.
We are converting WE8ISO8859P1 oracle db character set to AL32UTF8. Before conversion, i want to check implication on PL/SQL code for byte based SQL functions.
What all points to consider while checking implications on PL / SQL code? I could find 3 methods on Google surfing, SUBSTRB, LENGTHB, INSTRB. What do I check if these methods are used in PL/SQL code?
What all other methods should I check? What do I check in PL/SQL if varchar and char type declarations exist in code? How do i check implication of database character set change to AL32UTF8 for byte bases SQL function.
I have two databases called
a) Old Retailer database
b) New Retailer Database
We cant delete old database but we are using and we want to use both of them.
Now problem
Both dbs have a table called retailer.
I want to prevent duplication in them.
I.e it there is a retailer 12 created in old one new one shldnt allowo us to create retailer
id---12
similarly if there is a retailer 13 in new one it shouldnt be created in old table
retailer ids are unique. its not the case that with retailer id for example 5 there is a
different retailer in these two tables of diffferent DBS. Its unique
Now I have to put this criteria
how can i do it?
Second questions===================
if a primary key is auto increment. how can i skip some numbers lets say it is 1,2,3,4
i want that when next record shld be inserted it shld be 6 not 5. i dont want to feed the value 6. i want to know how to change indexing of primary key to skip some numbers when its set to auto increments.
How can we change Port 1521 in forms 6i and oracle database 8.1.7
View 1 Replies View RelatedI want to change database login in report at runtime.
For Example. I have created and run a menu by using database login "ABC/xxx" and want to run a report through this menu directly (Without using form) by different data base login i.e "xyz/ddd".
what is the sol. except passing user id at report call i.e rwrun60 parameter.
I am going to change some parameters on primary database (db cache, java pool etc.). I am not sure, if the changes are automaticallly propagated to standby or if I have to make the changes manually on stanby site too? I couldn't find clear answer in documentation. how parameter changes work in dg physical configuration?
View 2 Replies View RelatedI have restored database with the name DB to another database called DB01
it is in STARTED status (not mounted) and it seems I can not change the name if it is not mounts, and I can not mount it because of the name, how to solve this issue if possible? I have RMAN full backup from DB on my current server which hosting the database DB01 the initdb01.ora is ready and configured with DB01
what can I do next
ORA-01103: database name 'DB' in control file is not 'DB01'
I want to change database character set from AL32UTF8 to WE8ISO8859P1.
what are the steps I need to follow without creating any new database with the character set as WE8ISO8859P1.
I want to change Database Data Block Property at runtime.
View 4 Replies View RelatedI want to change space allocation for character columns in my database, So it will store them as 'CHAR' and not 'BYTE'.my character set is
SQL> SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER='NLS_CHARACTERSET';
VALUE
----------------------------------------------------------------
AL32UTF8
SQL> alter system set NLS_LENGTH_SEMANTICS='CHAR' scope=both;
System altered.I bounced the instance just to make sure
System altered.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
Connected to an idle instance.
SQL>
SQL>
SQL> startup
ORACLE instance started.
[code].....
And then I want to see that when I create a table with some varchar2 column,The space for it will be allocated by chars, and not by bytes! However, when I run a check of create table, this is what I get:
SQL> drop table check_char;
Table dropped.
SQL> create table check_char (some_name varchar2(10));
Table created.
SQL> select a.char_used
2 from all_tab_columns a
3 where table_name='CHECK_CHAR'
4 and a.owner='SYS';
C
-
B
SQL>
What is the reason for space allocation to remain in BYTES and not CHAR, or what else I can check?
I downloaded Oracle Database 11g Express Edition R2 to test Apex (I've never used). I want to know how to change the language of the version of Apex (integrated with Oracle Database 11g XE)? I would apex in French.
View 7 Replies View RelatedI have a requirement to change the instance parameter of the primary database and standby in the data guard. Any procedure to do the same. I have to do it directly on production and there is no test set up so I cannot experiment . The procedure I am thinking of is as below.
1. Stop the standby
2. backup the primary
3. Change the parameter and restart to make it effective
4. Start the primary
5. Go to stand by
6. Change the parameter and mount the database.
7. Check if both are in sync and apply logs if not.
I new to data guard concept.
I am using oracle 10g with data guard configured , I have primary ( A ) and standby database ( B ) .But because of some unavoidable conditions the primary database ( A ) got shutdown and was not starting , We shifted the standby database ( B ) at new location and changed it to primary with following command ,
startup mount;
alter database recover managed standby database finish;
alter database commit to switchover to physical primary;
shutdown;
startup;
This new primary ( B ) was open for end users for 2 days during which old primary ( A ) was shutdown .
I took the backup of ( B ) and restored it on A AND shutdown the B . Now A is acting as Primary database. Server B is shutdown . I want to change server B to standby database with A running as Primary .Is it possible ?
We have 2 node (n1 nad n2 ) RAC and 3rd node (n3) with Dataguard logical database for reporting ..
1. logical database (n3) not syn with primary (n1,n2)
2. During repair above mentioned problem by mistake my logical(n3) also become primary
3. now how I will again change my n3 to logical
4. I got following error
RE: ORA-16009: remote archive log destination must be a STANDBY database
i have 80 gb table d9040 which residing in separate tablespace in existing database(10g) OLTP .
i m going to import(impdp) an export(expdp) dump on 11r2 on which ASM is residing.
I have following two options available while importing
1.Put all the datafiles of that particular tabesace on a single disk .
or
2.Put half datafiles on disk 1 and remaining half on disk 2.
how to design the ERD for Rental Management like I want know how to design tables to check every month's rent. Is there any way to store month and year with out day in database?
View 2 Replies View RelatedI am trying to drop 90 columns from a big partitioned table. I was trying a physical drop first and since it is taking longer time I decided make the columns unused state and drop them. However I was able to set them to unused state.
Now I am trying to drop those unused columns from the table, it is running since 22hours Apporox. I am keep increasing the undo tablespace to retain the undo data.
I also have decreased the undo_retention to 300 from 900.
My question is there any better way to drop these columns. And is there any way to flush out the data from undo.
I have a quick question about Automatic Memory Management in 11g. I know that it combines the SGA and PGA components together, but the pga_aggregate_target (in 10g) was a target, rather than a strict limit. In certain circumstances you could (and we have) exceed the pga_ aggregate_ target by quite some way.
If I use AMM, does this enforce a limit on the PGA usage – or if I through enough bind variables at it, can I still exceed the ‘target’?
I just wanted to know if removing access for management and tuning packs in OEM disbale its access in just enterprise manager or in the database as well, i mean would that disable access to the scripts in the rdbms.admin driectory as well.
View 1 Replies View Related
