I have a Windows 2003 server with Oracle 10.2.03 database residing in one datacentre, with Dataguard configured to a physical standby in a similar location (proven process that works great).
I now have a requirement to transfer and synchronize the same live database to a database in a different country (AIX box), purely for data purposes not failover etc. I can transfer an export of the Database and have this up and running as a logical database of the live on AIX, but is it then possible to configure dataguard on the Windows server to also send updates to this logical database on the AIX system? Thus keeping them in sync with each other?
Can i create logical_stand_by for windows server 2008, the primary data base is HP UX , both operating systems are 64 bits and data bases are Oracle 10g 10.2.0.1.0.
We have 2 node (n1 nad n2 ) RAC and 3rd node (n3) with Dataguard logical database for reporting ..
1. logical database (n3) not syn with primary (n1,n2) 2. During repair above mentioned problem by mistake my logical(n3) also become primary 3. now how I will again change my n3 to logical 4. I got following error
RE: ORA-16009: remote archive log destination must be a STANDBY database
On next month i will have plan to delete history data on my Primary database, but i still want to keep them in logical standby as the data warehouse. So, how can i skip delete statement from primary database apply to logical standby.
Oracle SQL apply only support for Skip DML but not for keep delete statement
(on 10g and 11g)SQL>exec dbms_logstdby.skip(statement => 'DELETE',schema_name => 'SCOTT', object_name => 'DEPT');BEGIN dbms_logstdby.skip(statement => 'DELETE',schema_name => 'SCOTT', object_name => 'DEPT'); END; *ERROR at line 1:ORA-06550: line 1, column 7:PLS-00306: wrong number or types of arguments in call to 'SKIP'ORA-06550: line 1, column 7:PL/SQL:
I am not able to find any document that shows steps to create a SINGLE INSTANCE LOGICAL STANDBY database for a 2 NODE ORACLE RAC database. I have found documents for RAC to Single Instance Physical standby database. But not for Logical Standby.
Details:
OS: Redhat 5 DB: 10.2.0.4(shared file system, not using ASM/Standby also file system) Status: Single instance physical standby database created, need to convert it to Logical standby.
I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
I working on a Production Environment, where our Database is running on a IBM-AIX platform.I need to implement Logical standby database for reporting purposes, in order to improve the performance.Now the transaction and the reporting is done at the same site itself.I want to know that, operating system and platform architecture (RAM size, no. of CPUs, ORACLE_HOME etc..) on the primary and standby systems must be same or can be different. complete configuration for Dataguard. My os version is,
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit PL/SQL Release 10.2.0.4.0 - Production CORE 10.2.0.4.0 Production TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production NLSRTL Version 10.2.0.4.0 - Production
I have One Production and one logical standby database . Due to tape problem we are unable to take backups of primary . And due to business , we cannot take back up on disk in hot period(Bank database ) .
If i take logical standby database backup(level 0 ) using RMAN , then will i be able to restore it on production dtbs (In case Production down) ? . Logical standby is in sync with primary .
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply 2)Apply patches on logical standby database 3)let the name server point to the backup site 4)Apply patches on the primary database 5)Start SQL apply 6)Let the name server point back to the production site
1.create a primary database 2.duplicate a physical standby database; 3.turn on flashback on both databases. 4.record SCN xxx on physical standby database. 5.convert physical standby to logical standby (using keep identity statement) 6.flashback to logical standby to xxx 7.convert logical standby to physical standby 8.using real time apply I got errors: Fast Parallel Media Recovery enabledManaged Standby Recovery starting Real Time ApplyMRP0:
Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home ora/ app/ oracle/ diag/ rdbms/ ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:ORA-19906: recovery target incarnation changed during recoveryManaged Standby Recovery not using Real Time ApplyErrors in file /home/ ora/app/ oracle/diag/ rdbms/ ora11gr1dg/ ora11gr1dg/ trace/ora11gr 1dg_mrp0_ 10120.trc:ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.Standby database incarnation:
List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time-------1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:182 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGV
Is it possible to set a physical standby between 2 servers with same OS but different level ? I mean primary has windows 2003 SP1 and Standby has windows 2003 SP2. I want to know if it will work properly or not.
We are planning to have new installation of 11GR2 and would like to create data guard for this system. I have one server in Houston and other in Austin TX. the OS will be Windows 2008 R2.
How can i set up data guard and what is the requirements?
i want to configure my present Data Guard Setup with Enterprise Manager...and on the Enterprise Manager grid control page i am not seeing any Data Guard option.....i am using oracle 10gR2 and Windows XP.
How to use enterprise manager for configuring Data Guard.
We have physical data guard configured version (10.2.0.4). We are in need to upgrade primary & standby database to 11G R2. Can we perform rolling upgrade.
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated))) VERSION INFORMATION: TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
Statspack has been configured for Active Dataguard on Primary database.We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.Below is what i got from statspack report for one hour
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment ~~~~~~~~ ---------- ------------------ -------- --------- ------------------- Begin Snap: 18611 21-Feb-13 22:00:02 236 2.2 End Snap: 18613 21-Feb-13 23:00:02 237 2.1 Elapsed: 60.00 (mins) [code]...
Why there could sudden spike of demand on UNDO data in Active Data Guard ?
I am working in a bank as an system consultant, i have a SAN Storage Area and oracle as below.
SAN 1
This interface includes the DATA FILES of the oracle tablespace
SAN 2
SAN1 Mirrors the DATA FILES of the oracle tablespace to SAN 2
1. Can i rely on real time data recovery from SAN2 ? 2. if SAN1 (Data Files are currupted) will the SAN2 Data Files will be currupted as well. 3. If the SAN2 is currupted then what Oracle Features can be used to have uncurrupted data.
i did everything writen but when i do *SQL>alter database recover managed standby database disconnect from session;*
i go and look in the standby database AlertLog file ,and thats whats writen
*ORA-01157: cannot identify/lock data file 1 - see DBWR trace file ORA-01110: data file 1: 'F:ORACLEPRODUCT10.2.0ORADATADBSYSTEM01.DBF' ORA-27041: unable to open file OSD-04002: غير قادر على فتح الملف O/S-Error: (OS 3) The system cannot find the path specified.
[code]....
strange thing that it realises the primary database in drive F and it goes to it but i dont understand what could be the reason of this ,although im doing this command while primary database is shutdown!
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD; BEGIN DBMS_LOGSTDBY.BUILD; END; * ERROR at line 1: ORA-01354: Supplemental log data must be added to run this command ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669 ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755 ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12 ORA-06512: at line 1 ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370 ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
I have set up a cross platform (Microsoft Windows IA (32-bit) -> Linux x86 64-bit) data guard and it worked fine.Then I did a switch over (which again worked) and found out the data is not getting replicated at all.. checked the data files available from the new primary database and found out they are in the windows format as below..
SQL> select name from v$datafile;
NAME -------------------------------------------------------------------------------- D:ORACLEAPPADMINISTRATORORADATAMFSSYSTEM01.DBF D:ORACLEAPPADMINISTRATORORADATAMFSSYSAUX01.DBF D:ORACLEAPPADMINISTRATORORADATAMFSUNDOTBS01.DBF D:ORACLEAPPADMINISTRATORORADATAMFSUSERS01.DBF D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
and physically they were created at '/home/app/oracle/product/11.2.0/db_1/dbs/' and as
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file OSD-04002: unable to open file O/S-Error: (OS 2) The system cannot find the file specified. Errors in file d:oracle11gappadministratordiag dbmsstandstand racestand_dbw0_6916.trc: ORA-01157: cannot identify/lock data file 2 - see DBWR trace file ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1: ORA-16004: backup database requires recovery ORA-01157: cannot identify/lock data file 1 - see DBWR trace file ORA-01110: data file 1: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
Our organization has recently decided to go for storage metro cluster solution for disaster recovery. In a Data guard environment, we normally calculate how much archive log is generating and based on that value we calculate the required bandwidth.
For storage metro cluster, we need to find how much block is changing in our primary database, and the same rate of change would apply on DR cluster. Now, i need to give the assumption how much changing is happening in my system. How to calculate the change.
i'm using a mixture of Oracle� Data Guard Concepts and Administration11g Release 1 (11.1) And Bulletin : MAA - Creating a RAC Physical Standby for a RAC Primary 10g ( on oracle support) But neither is comprehensive for what i'm trying to do.
setting up Data Guard Broker on a RAC Data Guard environment?
I am very new to data guard...I have a primary and a physical standby database...If the primary got crashed, are the users directly switched to physical standyby (is it automated) or the DBA has to manually do the fail over or switch over....is it the same concept as in RAC like TAF....How can the DBA know that the users are disconnected from the database.....explain with some steps...
Log shipping stopped logging/shipping into the Standby Database in one of our Oracle Data Guard Servers about two month ago and there was no change carried out as at that time. The Data Guard has only one Standby database. I have been managing the log shipping and recovery manually.
