In our company we have a requirement to export data out of a live dbs and import that into a test db for issue replication,debugging & fixing from time to time.
As a junior DBA am resposible to import a dump file provided to me into a test DB. The export is taken off by customer dbas or consultants for a specified list of tables/schemas etc.
I have readonly access to source database and the issue I am facing is after the import there are certain objects that get missed out or do not get imported properly.
I would like to know if there was a script I can use to generate a report on the source DB and then run the same on the target DB after the import and compare to find out if any objects got missed out.
I have a report where the Shipments list will appear.The shipment_id appears as hyperlink and when it is pressed it should be redirected to another report which displays the cost details on the respective shipments
But we get an error message as in the attachment when i press the hyperlink. what would be the issue and where should i check for the error to resolve? Also the query used to extract data is
I am facing error message: rep-1814 report cannot be formatted onject "vertically" can nver fir within the _49 Error in a specific Computer alone when i run a report. When i run the report in any other PC its working fine. I am yet to reinstall the Developer 2000 S/W.
I created a report ...whcih i complied and run on paper layout form.. it shown me on correct dta..but i change change layout size and postion on that viewer..
is it avoidable....if yes, then how ?? I wantto lock these object while previewing...
While practicing with Triggers, the following error was encountered. An Object Type and an object Table are created.
create or replace type typPerson is object (id number, firstname varchar2(30), lastname varchar2(30) [code].........
I executed the below insert statement, and I got the following error.
SQL> insert into person_obj_tab values (10,'Object1','From Trigger'); insert into person_obj_tab values (10,'Object1','From Trigger') * ERROR at line 1: ORA-03113: end-of-file on communication channel Process ID: 4153 Session ID: 136 Serial number: 305 [code]......
SQL> insert into person_obj_tab values (10,'Object','Original');
1 row created.Question:
1) Trigger of version 1 did not report any error during compilation, but during DML execution, hangs for sometime and gives the above error. 2) Whether direct assignment of Objects of greater size is possible inside triggers built on object Tables? 3) Suppose an object contain multiple attributes (say more than 20), then how to assign them inside a trigger?
I have a problem with executing oracleCommand.ExecuteReader() method. Whatever I try it always returns null and it won't create OracleData reader object. I'm using ODAC 1120320_x64 for .net 4.0 and timesten112241.win64. Don't sure what to do. Debugger is showing strange thing in OracleConnection object : ConnectionState = Closed, but output of ttStatus shows connection to TimesTen data store and ExecuteNonQuery() command works just fine with or without (in or out) parameters. But when I try to execute some query with multile output such as select *, I can't get any result.
I also have a strange problem with connection.Open() When I execute Open() i throws AccessViolationException that can be handled with [Handle ProcessCorruptedStateExceptions] attribute, but connection is established after that and my application works fine until I try to instance OracleDataReader object.
Here is the code: OracleCommand select = null; OracleDataReader reader = null;
select = new OracleCommand(selectStmt, connection); select.CommandType = CommandType.Text; try { reader = select.ExecuteReader(); // this line throws NullReferenceException if (reader.HasRows) { [code]....
Just to mention, I tried it with different queries (pl/sql, plane sql, stored procedure) and all of them works fine in SQL Developer, but not in app.
Is there any query to find the dependent object details for any object. Like if mview is built on a table, then i should be able to find the table name with out checking code of the mview. similar way for view and functions or procedures etc...
I have an Type-object typeObj1 that consists another Type-object typeObj2. this def has another Type-object typeObj3. how to access variable declared inside typeObj3. I have syntax below for each Type.
CREATE OR REPLACE TYPE typeObj1 AS OBJECT ( SYSTEM_IDENTIFER VARCHAR2(50), PROCESS_TYPE VARCHAR2(50), abc typeObj2
) /
[Code]...
/I have tried to access the type-object in where clause in following way
FROM TABLE(CAST(I_typeObj1 AS typeObj1)) ITTPRC, ...... Where ....... AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM IN (SELECT ADDTN_INFO_KEY_TYP_NM FROM TABLE(ITTPRC.abc)))
AND (ADTINF.ADDTN_RQST_TYP_VAL_DT IN (SELECT ADDTN_RQST_VAL_DT FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL ) AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM IN (SELECT ADDTN_RQST_VAL_NUM FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL ) AND (ADTINF.ADDTN_RQST_TYP_VALUE IN (SELECT ADDTN_RQST_VALUE FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
In this way i am able to access the variable inside typeObj3. But problem is i am getting error "ORA-01427 single-row subquery returns more than one row" when i pass more that one typeObj2.
I have data stored in the format 01.01 , 01.02,02.03 in one field of table , i dont want my user to deviate from this coding by not typing like 0001.01 or anything othen than above format , how can i prevent this.
I have two date fields in my form one start date and the other is end date.I have changed their properties to datetime and set the initial value $$dbdatetime$$ and format mask to dd/mm/rrrr 24HH:MM , what i want is
1.i want to display the A.M and P.M along with that. 2.If the time and date of end dt is lesser than start error must come. 3.If the user enters the P.M during the day time before noon then it should give error message.
I had used a When-Validate-Item trigger against an text item.
Also i had a push button (EXIT) for Exiting from the Form with code : Exit_Form(no_validation);
But if an invalid text is entered in the Text-Item and after that if i use the EXIT push Button then it doesnot exit from the Form till a valid text is entered inside the Text-Item.
how to Exit from Form even if the Text-Item has Invalid Value.
create TABLE pan_number(pan CHAR(10) NOT NULL); INSERT INTO pan_number(pan) VALUES('ABCDE1234A'); INSERT INTO pan_number(pan) VALUES('FGHIG5678F'); INSERT INTO pan_number(pan) VALUES('ABCDE12345'); INSERT INTO pan_number(pan) VALUES('ABCD1234A'); select * from pan_number;
now i need to validate valid PAN number which is of " The first 5 letters should be alphabets & last letter as alphabet & total length of PAN no. should be 10 digit"
i need to display valid PAN number , only first two rows are valid PAN numbers.
function isnumeric( p_string in varchar2) return boolean as l_number number; begin l_number := p_string; return TRUE; exception when others then return FALSE; end;
It is not recognizing function IS NUMERIC. Is there any way, I can do this through External Table.
I'm getting error like
The following error has occurred:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-00554: error encountered while parsing access parameters KUP-01005: syntax error: found "identifier": expecting one of: "comma, date_format, defaultif, enclosed, (, ltrim, lrtrim, ldrtrim, notrim, nullif, optionally, ), rtrim, terminated" KUP-01008: the bad identifier was: isnumeric KUP-01007: at line 9 column 16 ORA-06512: at "SYS.ORACLE_LOADER", line 14 ORA-06512: at line 1
Insert into TEST(CREDIT_BALANCE, AWARDS_BALANCE) Values ('1678.09', '1678.9'); Insert into TEST(CREDIT_BALANCE, AWARDS_BALANCE)
[Code]....
From valid records from test table those two columns,need to be insert into test1 table. We should validate the decimal values while selecting from test table.
We have a 10g environment with DataGuard running for reporting purposes. Our application team is getting ready to upgrade their application and it requires that several SQL Scripts be run to perform the primary database updates. A couple of them are over 1 MB in length. My concern is that these scripts will break DataGuard. I am not a DBA by any stretch, but I seem to remember there are certain limitations with DataGuard.
I have reached back to the team and asked them to have the Vendor confirm these scripts are validated for a DataGuard environment and I have also reached out to the System DBAs for review. I am wondering if there is an utiility available that can check the SQL to confirm if there are any DDL or DML statements that will not work in DataGuard. Likewise, we are going to run these scripts in a non-production DataGuard enabled environment first, but I want to have some level of confidence, that this will be a success.
I have a time field which i need to validate for military time. for example like e.g.1630. Time entered outside of military time range should not be permitted e.g. 1364, 2510.
1. Below TXN_LOG table Expected to have 0.5 to 1 million records & TXN_LOG_HIST table will have max 3 million records.
2. On daily basis system will move records from TXN_LOG to TXN_LOG_HIST.
3. The below mentioned check will be performed for each transaction, With out this check currently my process is doing 10tps. (transaction per second).
The below validation we are currently using which is overhead for our transactions processing. Also the below mentioned check will be performed for each transaction, With out this check currently my process is doing 10tps. (transaction per second).
BEGIN SELECT COUNT(1) INTO l_exists FROMTXN_LOG WHERE AC_NO = p_acho TXN_INIT_DATE = p_txn_date AMOUNT = p_amt
[code]....
Is there any fastest method to check above record exists validation from the both the table?
I have one column Value his Datatype is varchar2 and I want to validate it with Type column his values are(Char,Date,Number). If Column Type have value Number then column value should accept number input only. How we 'll achieve this.
my employer wants me to create an application that will respect our accessibility rules. I know APEX 4.1.1 do it far better then APEX 3.2, but this is our current version.
Do you know any way to tweak how APEX 3.2 show the error messages on the fields after the validation have been executed ?We must show the error messages before the field's caption.
And, if I use the native validation process of 3.2, will it be upgraded to 4.1.1 when we do the move without any actions ?
I am trying to refresh the validation database with the old production backup i.e. our requirement. I have given the rman script i have executed and the output error message amd the rman configuration setting. Plus in the next post ill post the current sucessfully running RMAN script for your reference.
rman TARGET sys/passwd@Production CATALOG rman_pmxp/rman@catlog AUXILIARY sys/passwd @validation RMAN> show all 2> ; RMAN configuration parameters are: CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 90 DAYS; CONFIGURE BACKUP OPTIMIZATION OFF; # default CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'H:\backups\DB_Sunday_Backup\Prod_%d_%F.rman.ctl'; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%F'; [code]...
i know that pl/sql's strong point is not regular expressions.given my requirements per employer, email validation will need to be done in the pl/sql layer. i'd like to implement RFC822/RFC1035 for email validation
I have a table which contains data of all calcualted payements for a Land for a particular period i.e. for a Land 124 for the duration of Jan-2010 to Mar-2010 100 rupees rent is paid to the owner.Requirement here is that for a particular duration i.e is for Jan-2010 to Mar-2010 system calculation of rent for a land file multiple times where the table would contain history of each transaction i.e. a user can calculate for a Land 124 for duration fo Jan-2010 to Mar-2010 rent more than ten times and there would be ten records in the table but only one record out of these would be valid where the user cannot calcualte rent for Lnd 124 for Jan-2010 to Mar-2010 without updating the status of the last record in the table for the same land and duration to invlaid. I want to add this business validation through triggers as i am not able to do so through check constarinst.I want to ensure that only one record should be valid for a particular land for a particular duration since row level triggers do not allow us to query the table ion which the trigger is executing i am trying to use statement level trigger but i have a few doubts here: Incase of a Before Insert statement level trigger does the trigger have access to the data which is being inserted into that the table cause whenever a record is being inserted into a table the systen would check through the trigger that if there is a valid (payment_status is valid) payment record in the table for that same land file and same duration.If there is a valid record then the trigger would through an exception. I know you can use a row level trigger with an autonomous transaction should work wihtout giving the mutating table error issue but i wont to know if using a statement level trigger here is feasible!!
In the attached PRE-INSERT Trigger Code i need to do a validation. Validatation: If the Date range is between FEB 6 2013 and MARCH 1 2013 then the code should work ELSE It should throw a message
Check_Product_Title; Begin if :prod2.internet_product_flag = 'Y' and :prod2.brnd_code is null then soft_messages('E',TRUE,'Brand code must be specified for CCH online product'); end if;
I just need to create a login form ..its like user will login using his given id and password will be encryted when entering and i just need to simple validation that if he has entered corrected password it will display message ok or else wrong password.
I would like to know if with Oracle Forms Builder 11g, we can use mouse instead of TAB to validate record? And why Forms Builder use TAB or ENTER Key to validate record? I have a SAVE button, but i want to replace the TAB navigation validation by the mouse click. Is it possible?
my purpose is when PRE-INSERT trigger fires validation should be done like date format , primary key in table if validation is ok then a value of text box should be set to sequence no . else it should generate message