Comparison Between Toad And SQL Developer To Compare Schemas
Apr 17, 2013
My primary objective was to compare objects in schemas in two different databases and find out the differences, Execute DDL's in the database where objects are missing and syn schemas in two different databases.
So I need to compare schemas in databases. Which tool will be user friendly to make a comparison of database objects existing in schemas in two different databases.
I'd like to see if I can get a list of pro and cons between Toad and SQL Developer for comparing schemas pros and cons. How to make a comparison. I have some idea on using TOAD but was not familiar with SQL Developer.
Below is my requirement:-
Connect to Source
Connect to Target
Compare schemas with different object types
Find out differences
Generate DDL's for the missing objects or for the objects in difference report
Run them in missing instace(Source/Target)
Make sure both are in sync.
View 2 Replies
ADVERTISEMENT
Apr 17, 2013
My primary objective was to compare objects in schemas in two different databases and find out the differences, Execute DDL's in the database where objects are missing and syn schemas in two different databases. So I need to compare schemas in databases. make a comparison of database objects existing in schemas in two different databases. I'd like to see if I can get a list of pro and cons between Toad and SQL Developer for comparing schemas pros and cons. navigation in SQL Developer to compare schemas.
Connect to Source
Connect to Target
Compare schemas with different object types
Find out differences
Generate DDL's for the missing objects or for the objects in difference report
Run them in missing instace(Source/Target)
Make sure both are in sync.
View 2 Replies
View Related
Feb 12, 2013
comparison of oracle and toad products.I know we have oracle enterprise manager for doing application and enterprise management.I am listing the tools from toad
Can list the tools from oracle which have or perform the same functionality.
Toad
Toad Development Suite for Oracle
Toad DBA Suite for Oracle
Toad for SQL Server Professional Edition
Toad for SQL Server Xpert Edition
Toad Data Point Pro Edition
Toad Data Point Pro Edition- with analytics
[code]....
View 10 Replies
View Related
Mar 11, 2012
There are two different DBs having similar schema. Need to compare the rows in the tables and insert in the 1st DB whatever is different in 2nd DB.
Can I choose which rows to insert which to discard from 2nd DB in 1st DB.
View 2 Replies
View Related
Jun 17, 2010
Due to company restrictions, i unable to use oracle third party tools such as toad, pl / sql developer etc except oracle sql developers. I heard Oracle Developer Tools for Visual Studio is best option to work oracle pl/sql and sql.
View 4 Replies
View Related
Jul 3, 2009
How to find explain plan of a query in oracle using TOAD(any) and SQL Developer(any)?
If there any functional key to find out let me know.
View -1 Replies
View Related
Sep 11, 2013
The date is different for same query in Toad and Sql Developer.
Below is the query
In SQL Developer
SELECT start_date, length(start_date) from my_table where p_id = 1;
09-MAY-5249 9
In Toad
SELECT start_date, length(start_date) from my_table where p_id = 1;
blank 9
Did some queries below for research.
SELECT start_date, DUMP(start_date, 1016)
from my_table
where p_id = 1;
09-MAY-5249Typ=12 Len=7: 30,37,d5,a,0,a2,d5
SELECT start_date, DUMP(start_date, 1016)
from my_table
where p_id = 2;
01-JAN-2013Typ=12 Len=7: 78,71,1,1,1,1,1
Why is same query returning two different results in two tools.
View 16 Replies
View Related
May 7, 2013
I having some weird trouble with my cursor results. My cursor query returns some rows in which one of the called CUT_TEXT2 returns some text msg as per my decode statement. With the result of that value I am sending some emails.when I execute the cursor in toad it is fetching exact values what I wanted. But When I registered the same program in Oracle EBS R12 as a concurrent program it is giving wrong results.
For ex :
ASSIGNMENT_ID EMPLOYEE_NUMBER PERSON_ID DATE_PROBATION_END 3_WEEKS INI_TEXT 3_WEEKS_3_3 CUT_TEXT2 SUPERVISOR_ID
12847 0370 18906 5/23/2013 5/2/2013 NO_ALERT 5/7/2013 CUT_TEXT2 19275
16671 0636 25163 5/28/2013 5/7/2013 INI_TEXT 5/12/2013 NO_ALERT 17202
For ex : PERSON_ID = 18906 has CUT_TEXT2 (col) = CUT_TEXT2 value. In application the same person id has (18906) CUT_TEXT2 = NO_ALERT .. which is failing my program.
CREATE OR REPLACE PACKAGE BODY apps.xx_hr_probation_alert_new
IS
PROCEDURE alert_probation_f_new (
errbuf OUT NOCOPY VARCHAR2,
errcode OUT NOCOPY NUMBER,
notification_type VARCHAR2
[code].....
View 1 Replies
View Related
Oct 13, 2011
Currently I am working on conversion project. We want to verify the both applications updated database values are same or not.
if you run same transaction in both application values are updated in the database. I want compare both database tables, its updated same values in table or any mismatch in the table, is there any tools available right now to compare the two rows values in same tables.
View 2 Replies
View Related
Dec 15, 2010
Select
to_char(to_date('10-02-2006 10:30:00 AM', 'DD-MM-YYYY HH:MI:SS AM'), 'HH:MI:SS AM') as a1,
to_char(to_date('10-02-2006 01:30:00 PM', 'DD-MM-YYYY HH:MI:SS AM'), 'HH:MI:SS AM') as a2,
Case
when to_char(to_date('10-02-2006 10:30:00 AM', 'DD-MM-YYYY HH:MI:SS AM'), 'HH:MI:SS AM') >
[code]...
from the above query i was expecting value '2' but its returning '1'. As I am using TO_CHAR its trying to compare characters. Is there a way, to compare times alone like less than, greater than?
View 3 Replies
View Related
Apr 3, 2011
When we create sql and some pieces of sql are implemented as oracle function. and we run this sql only once every day. I read article that function after first run located in cache. This part of cache ( with function ), is it really consume one oracle resources? Or it will be erased after while.
View 3 Replies
View Related
Jul 27, 2010
I have two columns in database
INPUTDATE DDMMYYYY
and
OUTPUTDATE YYYYMMDD
I want to compare both the columns because of format of columns i am getting problem to compare.
View 2 Replies
View Related
Jun 28, 2010
SQL> select * from query;
CUSTO SWITCH DATE_X METRIC COUNT_X SEQUENCE_NO FILE
------- ------- --------- ------- ---------- ----------- ----
JCI S1 28-JUN-10 PORT1 10 4 TNB
JCI S1 28-JUN-10 PORT2 4 4 TNB
JCI S1 28-JUN-10 PORT3 8 4 TNB
JCI S2 28-JUN-10 PORT1 1 2 TNB
JCI S2 28-JUN-10 PORT2 5 2 TNB
JCI S3 28-JUN-10 PORT1 6 8 TNB
JCI S5 28-JUN-10 PORT2 2 4 TNB
------->s5 only in the current month-it was not in the previous month data collection
-----------------------------------------------------------------------------
JCI S1 28-MAY-10 PORT1 10 3 TNB
JCI S1 28-MAY-10 PORT3 5 3 TNB
JCI S2 28-MAY-10 PORT1 4 1 TNB
JCI S2 28-MAY-10 PORT2 2 1 TNB
JCI S2 28-MAY-10 PORT3 8 1 TNB
JCI S3 28-MAY-10 PORT2 7 7 TNB
JCI S3 28-MAY-10 PORT3 5 7 TNB
JCI S4 28-MAY-10 PORT1 2 10 TNB
------->s4 in the previous month data
15 rows selected.
1 SELECT A.CUSTO,A.SWITCH,
2 A.PORT1-B.PORT1,
3 A.PORT2-B.PORT2,
4 A.PORT3-B.PORT3
5 FROM (SELECT
6 A.CUSTO
[Code] ......
CUSTO SWITCH A.PORT1-B.PORT1 A.PORT2-B.PORT2 A.PORT3-B.PORT3
------- ------- --------------- --------------- ---------------
JCI S1 0 4 3
JCI S2 -3 3 -8
JCI S3 6 -7 -5
How to include the Switch S4 and S5 in the output. how implemented FULL OUTER JOIN
View 13 Replies
View Related
Sep 1, 2010
I need to populate a table based on the results of comparing sets of data. I decided to do this using MULTISET EXCEPT, but having created the structure, do not know whether it is actually possible, and if so, what syntax to use.
I have created:
CREATE OR REPLACE
TYPE NUMBER_TBL IS TABLE OF NUMBER;
/
CREATE OR REPLACE
TYPE PACKAGE_OPTION_GROUP_OBJ AS OBJECT( ID NUMBER, benefits NUMBER_TBL )
/
CREATE OR REPLACE
TYPE PACKAGE_OPTION_GROUP_TBL AS table of PACKAGE_OPTION_GROUP_OBJ
/
I have populated the following:
selectedTable PACKAGE_OPTION_GROUP_TBL := PACKAGE_OPTION_GROUP_TBL();
defaultTable PACKAGE_OPTION_GROUP_TBL := PACKAGE_OPTION_GROUP_TBL();
groupTable PACKAGE_OPTION_GROUP_TBL := PACKAGE_OPTION_GROUP_TBL();
comparisonTable PACKAGE_OPTION_GROUP_TBL := PACKAGE_OPTION_GROUP_TBL();
Once populated they contain the following data:
***selectedTable***
GROUP_ID : 121
BENEFITS : 161
---------------------------
GROUP_ID : 123
BENEFITS : 165
BENEFITS : 167
---------------------------
***defaultTable***
GROUP_ID : 121
BENEFITS : 161
---------------------------
GROUP_ID : 122
BENEFITS : 162
BENEFITS : 163
---------------------------
***groupTable***
GROUP_ID : 121
BENEFITS : 161
---------------------------
GROUP_ID : 123
BENEFITS : 165
BENEFITS : 166
---------------------------
I first need to compare the ID field only of selectedTable with defaultTable to find where they differ, something like
comparisonTable := selectedTable MULTISET EXCEPT(ID) defaultTable
I am expecting the result to be something like:
***comparisonTable***
GROUP_ID : 123
BENEFITS : 165
BENEFITS : 167
---------------------------
However, I don't know if this is possible and if so, what the syntax would be.
At a later stage, I will need to compare the benefits between selectedTable and groupTable, where the GroupID's match, which is why I have the tables structured in this way.
View 6 Replies
View Related
Jul 11, 2013
I ran SPA for SQL workload of around 94 SQLs.In comparison report that is generated by SPA, there is a metrics "Top 94 SQL Sorted by Absolute Value of Change Impact on the Workload".
In this metrics there is a column "Impact on Workload". This column hold a value in percentage.how this is calculated by SPA. What formula is used by SPA to calculate "Impact on Workload".
View 2 Replies
View Related
Mar 11, 2011
I am trying to compare the ranges of low pair and high pair,if they are within the range then source_conn_id should remain same,else it should be updated to null,which i had written it in else block.How can I implement the IF block and what to write in that block so that source_conn_id can remain the same.
SQL> CREATE OR REPLACE PROCEDURE fp_complements_src(p_id varchar2,ftr_con_id varchar2)
2 AS
3 BEGIN
4 FOR i IN(SELECT SOURCE_CONN_ID,LOW_PAIR,HIGH_PAIR FROM COMP_TEMP1 WHERE SOURCE_CONN_ID=ftr_con_id)
[Code]....
View 2 Replies
View Related
Jul 5, 2012
Provide details about performance comparison between Oracle Sun Sparc 10 and IBM P7 server running oracle 11gR2 for OLTP system.
I know that licensing wise Sun will be much cheaper but i want to know other aspects such as performance, storage, transaction per second. Basically on a nut shell which server to buy for our OLTP system.
View 1 Replies
View Related
Sep 25, 2008
When attempting to create the following table I recieve the error
count(m.mission_id) < 4
ERROR at line 9:
ORA-00905: missing keyword.
assist in order to resolve this error.
CREATE TABLE AM_agents
AS
(
SELECT
a.first_name || ' ' || a.last_name fullname,
'agent' person_type,
[code]...
View 4 Replies
View Related
Dec 9, 2008
Environment Setup
Oracle Server 11g on HP-UX
Oracle Client on Windows
I am using swingbench tool to generate load on DB and using OLTP like benchmark i am comparing the performance of plain data and encrypted data.
I have created two different database. one for tde and other for plain. I have populated same number of rows in both databases. Then i start running the benchmark and i use SAR to collect disk I/O's, VSAR to CPU usage.
From the sar report it seems that,
Oracle plain has faster transactions, it uses minimum CPU. But when look in tot the Reads/Writes TDE has lower than the plain.
If TDE needs to encrypt the data to store in the disks it should occupy more space than the plain data. Then the I/O should be more in TDE..
Note: Bcz the DB parameters are same, number of rows in the tables are same. File system and its block size are same. I will run the swingbench seperately for both the databases.
I am attaching the excel sheet for sar results. Let me know if you need more information
View 7 Replies
View Related
May 25, 2011
Could it be that it's impossible to change the date format in the default_where clause?
The table column PROPOSAL_END in the database that I want to compare with, is in Format DD.MM.YYYY.
I tried:
set_block_property('Tours' , default_where, 'Number_of_places > 0 AND PROPOSAL_END <= ' || to_char(to_date(sydate,'DD.MM.YYYY')));
set_block_property('Tours' , default_where, 'Number_of_places > 0 AND PROPOSAL_END <= ' || to_char([-- A date item with the intial value $$date$$ the output is in Fomat DD.MM.YYYY by default --]));
set_block_property('Tours' , default_where, 'Number_of_places > 0 AND PROPOSAL_END <= ' || to_char(to_date([-- A date item with the intial value $$date$$ the output is in Fomat DD.MM.YYYY by default --],'DD.MM.YYYY')));
It all does dot matter. Every time the generated select-statement shows the format DD-MMM-YY. How can I change that?
View 6 Replies
View Related
Apr 17, 2013
I have a below requirement to compare the development and production objects.if any association_type or association_role are not exists in production then i need to return a message like "the Type Object found in Development,but not Production"
Below is the tree structure
development
ProcessingSite(Association type1)
TreatingSite(role1)
MoodedActivity(role2)
MaterialName(role3)
production
ProcessingSite(Association type1)
TreatingSite(role1)
MaterialName(role2)
Processing Site is an association_type and it is having 3 association_roles. we can observe same association_type in the production, but Mooded Activity(association_role) is not available. in this case we need to return "Type Object found in Development,but not Production".
View 2 Replies
View Related
Nov 4, 2013
We have migrated database data from physical servers to virtual servers. i want to ensure all database parameters are set correctly in both physical and vblock servers. My question is what are all the parameters need to check and compare in both servers to ensure database from both servers ( physical/vblock ) are in sync.
Database used -- RAC database
OS used -- RHL 5.7
View 5 Replies
View Related
Jul 25, 2013
I have written one program with dynamic SQL and piece of code is follows.
sql_stmt := 'SELECT '||CBID(i)||',BID,'||CBEID(i)||',''NA'',''NA'',''NA'' FROM DIM_ORGNISATION WHERE BID in(select PARENT_B_ID from ORG_DIM_LOD where CHILD_B_ID ='||CBID(i)||') and to_Date(start_Date,''DD/MM/YYYY'') = TO_DATE ( trunc('||Cstart_date_type(i)||'),''DD-MON-YY'',''NLS_DATE_LANGUAGE=ENGLISH'')'; EXECUTE IMMEDIATE sql_stmt BULK COLLECT INTO tempBID, tempSBD, tempLBD, tempL3BD, tempL4BD, tempSABD And ,
when i'm executing dynamic SQL gives the error as follows.
ORA-00904: "JAN": invalid identifierORA-06512: at "LWNER.SHY_CREATE_MAPING", line 184ORA-06512: at line 2
when displaying with using
DBMS_OUTPUT DBMS_OUTPUT.PUT_LINE('Cstart_date_type(i)'||Cstart_date_type(i)||)); It's diaplaying it as "01-JAN-70".
View 7 Replies
View Related
Apr 29, 2013
i have 2 tables in two different sources.
I have loaded data from source to destination.
some rows are missed while loading.
i want to know the missing rows
View 11 Replies
View Related
Jul 13, 2010
I want to determine the process which will give the difference of object structures in different environments.
View 10 Replies
View Related
Nov 8, 2012
I have two tables T1 and T2. T1 is the original backup snapshot for changed records from overnight batch in a big table and T2 is the overnight batch changed records. Both tables have similar number of rows (T2 might have more for newly inserted rows) and you can find out the differences by comparing these two according to action column in T2 (C - Update, A - Insert and D - Delete)
how to compare these two tables to generate something like the following. I can join these two tables to generate the diff but it is one row per account.
client_nbr branch_cd, account_cd, action column, old_value, new_value
8888 123 45678 C account_clsfn_cd 004 005
8888 123 45678 C buy_cd 98 99
8888 012 34546 A sell_cd 12
8888 321 98765 D dividend_cd 1
I am using Oracle 10g so Unpivot cannot be used.
CREATE TABLE T1
(
CLIENT_NBR CHAR(4 BYTE) NOT NULL,
BRANCH_CD CHAR(3 BYTE) NOT NULL,
ACCOUNT_CD CHAR(5 BYTE) NOT NULL,
ACCOUNT_CLSFN_CD CHAR(3 BYTE),
SELL_CD CHAR(2 BYTE),
BUY_CD CHAR(2 BYTE),
[code]....
View 4 Replies
View Related
Jan 8, 2013
Is there any way to run a select command between 2 different schemas without using DB links ?
View 1 Replies
View Related
Feb 2, 2010
One function returns table metadata in xml form. This works for current schema but not for other schemas. Is it a privilege problem?
my code is..
CREATE OR REPLACE FUNCTION TEST.F_DBEG2
RETURN XMLTYPE
AS
Handle NUMBER;
V_OUTPUT_TOTAL XMLTYPE;
V_CNT NUMBER := 0;
BEGIN
[code]....
but when i select the object of another schema, got output.
SELECT * FROM TEST_NEW.DEPT;
Which privilege i need?
View 9 Replies
View Related
Jun 6, 2012
I'm trying to get the Create-Statements of all tables of several schemas:
SELECT DBMS_METADATA.GET_DDL('TABLE',u.table_name,'<schmema>')
FROM (SELECT TABLE_NAME, OWNER FROM SYS.ALL_TABLES WHERE owner='<schema>') u
Is there a way to create a loop to handle several schemas listed in a array, for example?
View 10 Replies
View Related
Feb 25, 2013
I want to find difference between the objects(tables(columns,constraints), views, sequences) in two schemas. One schema is staging and one is development . In development lot of changes are made , Is there a script or a opensource tool which will bring out the difference in columns, constraints in each table and sequences , views etc.
View 2 Replies
View Related