I want to use SSIS,when i use oracle 10g as a data source to SQL Server 2008 as Destination, it gives error ora-01017 invalid username/password logon denied, i did normal oracle installation and give full privileges(sysdba or sysoper) to the user(sys,system...),when i check connection it shows test connection succeeded but when click on next it gives above error.
View 3 Repliescan we use oracle client version to create a database in that server.
View 3 Replies View RelatedCan i install Oracle 10g Client 32 bit on our Windows Server 2008 R2 64 bit?
View 1 Replies View RelatedI have to create the two services(SID) in the same orcale 10g home.
View 2 Replies View RelatedI am using dg4msql to connect to SQL server from Oracle(10.2.0.4, with AIX 5.3).
#from my laptop sqlplus (10.2.0.2)
SQL>select count(*) from table1@mssql; #works
SQL>select * from table1@mssql; #ERROR
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Oracle][ODBC SQL Server Driver]String data, right truncation
{01004}[Oracle][ODBC SQL Server Driver]String data, right truncation {01004}
#from my laptop, TOAD
Both queries works fine.
i have compared
"select * from nls_session_parameters;" values , TOAD and sqlpus gives same result.
I have problem: I have 1 sql server already setup SQL Server 2012 Express and 1 Oracle Database server 10g. Now i want to insert data from SQL server to Oracle database through link server.
Some step i already make:
1. Setup oracle database 10g and configure listener (Finished)
2. Setup Sql server 2012 express on Windows 7 (Finished)
3. Setup ODTwithODAC1020221 on PC already setup SQL server (Finished)
4. Make Linkserver from SQL server to Oracle database (Finished), and can select data from Oracle Database on SQL server through Linkserver.
However when i insert data from SQl server to Oracle Server not success.
select * from OPENQUERY (QVHKTEST, 'SELECT * FROM QVSYSTEM')
After i run above script, result is OK
With: "QVHKTEST" is alias of Link server from SQL to Oracle server
: "QVSYSTEM" is a table on Oracle database, that table we want to get through Linkserver on SQL server
Both Server Database contain same name table is "QVSYSTEM"
-----------
INSERT OPENQUERY (QVHKTEST, 'SELECT BODY_NO,
MERCHANDISE,
MODEL_NAME,
LINE_NAME,
DATE_ENTRY
FROM QVSYSTEM')
values('VNF4619829','3227B002CA','L1068','01','2012/09/26 03:18:11');
If i run script above directly in SQL Window query can insert OK. This is code in trigger at table on SQL server:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author:<Author Name: Phuong Do Minh >
-- Create date: <Create Date: 10/12/2012>
-- Description:<Description: After data insert into table qvsystem on SQL server
-- This trigger will fire and insert that data into table qvsystem
[code].......
But when i make trigger after insert on table in SQL Server to insert data From SQL server to Oracle server, however not success and SQL server raise error below:
OLE DB provider "OraOLEDB.Oracle" for linked server "QVHKTEST" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
Msg 7391, Level 16, State 2, Procedure Insert_data, Line 16
The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "QVHKTEST" was unable to begin a distributed transaction.
I don't know how to configure them.
best method (easy and efficient) to load tables from sql server database to oracle database.
View 2 Replies View RelatedI'd like to make a connection from Oracle SQL Developer to a MS SQL Server DB. How can I do that?
View 2 Replies View RelatedUsing SQL Developer I am able to login using oracle credentials but I dont see any option for SQL Server. I see both Oracle and Access. Why I am not able to see the SQL Server option in SQL Developer tool? I need the SQL Server option because I want to transfer some tables from SQL Server database to Oracle database.
View 1 Replies View Relatedhow to migrate sql server database to oracle database?
View 2 Replies View Relatedi have my oracle 10g database on my windows 7 and i install sql server 2005 on my windows server 2003 .now i want to sync my oracle 10g database with my sql 2005 means whenever i make any changes in my oracle table its automatically effect in my sql server also.
View 1 Replies View RelatedI have installed Oracle 10gR2 database server recently in the Windows box. The database works fine. But I am unable to connect through the Internet Explorer. I found that the service for the isqlplus is not available. Do I need to run any script for creating the service?
View 12 Replies View RelatedBulk of Microsoft Application is running on windows server 2003 (OS) , is it possible to run parallel an oracle application on the same server .
View 4 Replies View RelatedI would like to Import data from Oracle 10g using Microsoft Sql Server (2008 R2) Import/Export Wizard, but i get this error when i try too establish the connection :
ora-01017
this the step i followed;
1- i filled the server name
2- username & password
3 - test connection ---> success
but when i try to follow pressing next(Suivant) i got the ora-01017 Error
Restarting oracle services through services.msc is faster then manual (In command prompt).
Even If we have heavy transaction on the oracle database But we can restart the database within minutes by using services.msc But It will take more time in command prompt(sql>shu immediate). So shall we assume here that services.msc is using shut abort command while restarting the database?
which are recommended Tool for load testing (for performance) on Oracle-J2EE, 3 Tier applications?
Is 'Oracle Application Test Suite' the best for such test where we can simulate numbers of users and their various actions?
Does it come with Oracle Database license or we have to buy it separately?
I have one .mdb (Microsoft Access Database) file and it has some tables in it. I had load it once using toad. But now i have to load it frequently into the database. Is it possible using external table, so i can access that tables using "select" statement.
View 6 Replies View RelatedI'm looking for 3 simple things.
1) A reverse engineering tool that I can point to an Oracle schema and get a "baseline" script to re-create that schema from scratch, with decently formatted DDL files (1 per object) neatly organized in a directory tree (by object type) and called in the correct order. Icing on the cake would be an option to pass the tool a list of tables containing static data and get DMLs to populate (insert) those tables as part of the script.
2) a diff tool that I can point to a pair of Oracle instances (source and target) containing a given schema and get a "delta" script to alter the target schema so that it becomes identical to the source schema. If data loss occurs on the target instance (i.e. drop a column) I would like to find a warning comment inserted in the script (e.g. "-- Attention: data migration DML needed here?"). Icing on the cake would be an option to pass the tool a list of tables containing static data and get DMLs to update (delete, update and insert) the data in the target tables to become identical to the contents in the source tables *without* deleting and re-inserting all rows (or dropping, recreating and repopulating the table).
3) I would like the above two tools (that, as you will have recognized, are basic to putting your database design under version control) to be open-source, with a command-line interface and a vibrant community backing them.
I was trying to delete the database in the test server. When i was deleting listener was already stopped, i continued deleting using dbca, it shown me some alert that datafiles cant be deleted because system could't find database, since listner was stopped so only service was deleted(the one showing in the windows administrator toolsservicesOracleServiceTEST).
All the datafile parameter files are still there. How can i delete the datafiles and parameter files belongs to that database or how to create the deleted service, so that i will start the listener and do the complete deleting of the database.
The problem is that this connection errors when I try to connect using my SQuirreL client. My developers want to connecting using the SID or the SERVICE_NAME and by using the "New Method" syntax, not the "Old Method" syntax. According to the documentation the "New Method" syntax works with the SERVICE_NAME or the SID. The "Old Method" only works with the SID.
# Host name is vmwwin7634.na.SAS.com
# SID is sting2
# SERVICE_NAME is sting2.na.sas.com
PROBLEM using SID errors ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2
THIS WORKS using SERVICE_NAME ==> jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com
I am using SQuirreL Client version 3.4.0
# Here is the tnsnames.ora entry on the server.
STING2 =
(DESCRIPTION =
[code]...
# In this documentation it says, "On new syntax SERVICE may be a oracle service name or a SID."You can find this on the orafax wiki under JDBC#Thin_driver.
# I was able to connect with the "old method" using the SID only, SERVICE_NAME errors jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2.na.sas.com
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521:sting2 (this works)
# "New Method"
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2.na.sas.com (this works)
jdbc:oracle:thin:@vmwwin7634.na.SAS.com:1521/sting2 (this errors)
(SQuirreL client error, "Unexpected Error occurred attempting to open an SQL connection.")
I have new virtual UNIX machine and I installed oracle client on /usr/lib/oracle. Also I have a oracle database and I am able to connect to this database from my desktop sql developer.
So now I am trying to connect from new UNIX machine. Where I created tnsnames.ora file under /usr/lib/oracle/network/admin and before connecting did export the following
export TNS_ADMIN=/usr/lib/oracle/network/admin
export ORACLE_HOME=/usr/lib/oracle/
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export PATH=$PATH:$HOME/bin:/sbin:$ORACLE_HOME/bin
export ORACLE_SID=VFIODSD1
when I try
# sqlplus
username :xxxxxxx
password : xxxxxxx
ORA-12545: Connect failed because target host or object does not exist. Not sure what I missed here. using same tns file I am able to connect from sql developer on windows.
I need to install Oracle client to get latest sql plus working on client pc as the problem is, i am not able to find out where i can download this , i just need the sql plus as i am not able use many commands because when i installed oracle forms 6i client tool , sql plus 8.0 got installed.
View 4 Replies View RelatedThe version is Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi. for Unix AIX 5
I install the ODBC Driver Manager, Basic Instant Client, ODBC Instant Client packages (libsqora.so, odbc_update_ini.sh).
The error:
[oracle@d4 oracle] $ isql OracleODBC-10g user passtemp -v
[01000][unixODBC][Driver Manager]Can't open lib '/home/oracle/instantclient_10_2/libsqora.so' : file not found
[ISQL]ERROR: Could not SQLConnect
Configuration
odbcinst.ini
[Oracle10gODBCdriver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /u01/app/oracle/product/10.2.0/db_1/lib/libsqora.so
Setup =
FileUsage =
CPTimeout =
CPReuse =
The documentation explic with exists the file libsqora.so.10.1 but not exists in the ODBC Instant Client packages.
I applied ln -s libsqora.so.10.1 libsqora.so but the connection not function
odbc.ini
[oradns]
Application Attributes=T
Attributes=W
BatchAutocommitMode=IfAllSuccessful
CloseCursor=T
[code].......
I have Oracle 7 database on Server1. I need to connect this using Oracle client from windows XP.
I have downloaded Oracle client 3.0 and when I am trying to connect it saying "Unable to connect: Unsupported Oracle version".
I would like to know if there is some specific file who identifies the installation of Oracle Client in some machine.
View 4 Replies View RelatedI was trying to connect to SQL server from Oracle using Oracle heterogeneous services (HS).But I found that I do not have HS installed on my system. It was mentioned in Oracle website that we need to run 'caths.sql' script under the path $ORACLE_HOME/rdbms/admin.
But I do not have any such folder(rdbms) in my $ORACLE_HOME.What does it mean? And how can I install HS alone on my system(Since I already have oracle)
What two Active Directory services are stopped when you install Active Directory before Oracle 10g? I know the error message for that and I know why it happened but I just need to know the two services so I can start them again. I think it happened because I installed Active Directory first so when I installed Oracle second it stopped two services and I just need to know them. The error message is:
Active Directory is missing binaries, please restart and try again
I have read almost all docs about distributed transaction on tahihi.oracle.com website,But I can find a statment about this:
Can Oracle always guarrantee the data consistent in a distributed transaction?
For example,there is a distributed transaction on node a,node b and nod c.node b and node c informed node a they were prepared,so node a committed,and inform node b and node c commit.then node b committed and feedback,but network on node c broken at this point,So node a can't not get feedback from node c,but node a and node b has been committed, so what will Oracle do in this condition?
If node c rollback the data on local node, consistent in this distributed transaction was failed ,yes?
I have a From which take Logical Backup through oracle export utility. This Form work fine when i Start OCJ4 but when i want to take backup after running oracle Forms & Report services its not take backup.
My Question is dose Oracle Forms & Report Services (Standalone) Support data backup through Export (exp) utility. I have install Oracle Forms and Report Services (Standalone) on Window XP (SP-3).
Is it possible for me as a DBA to find IP address of the client who ran a specific transaction or query in past?
Oracle server version I'm using is 11g.