When i try to copy a table within the database i get insufficient priv error.
SQL> COPY FROM JACK@JACK -
> CREATE T -
> USING SELECT * FROM JACK.T;
Enter FROM password:
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
ERROR:
ORA-01031: insufficient privileges
what privilege is required to perform this copy command ?
While trying to logging to database through pl/sql developer, getting error as "ORA-01031: insufficient privileges".But am able to logging by system.
As per the instruction by the below link, checked the privileges of ord_dba. All are correct. Now, i am in puzzle to rectify the error.
[URL]
I am using the SQL*PLUS COPY command to move the data from my database to another remote database. The data in my database also contains DATETIME format. But since COPY command cannot handle DATETIME format, I am wondering is there any workaround for this.
Note: Due to some limitations, I cannot use other methods like DATABASE LINK or EXPDP/IMPDP commands.
I am facing problems during login through sqlplus prompt.
It occurs in all the Linux boxes, with 10g and 11g databases, whereas in Windows it works good.
Sqlplus / as sysdba works good ( So there is no problem in OS Authentication)
Sqlplus sys/xxxx@SID as sysdba works good( Ther is no problem with password file)
But Sqlplus /@SID as sysdba is not working, It gives me an error message whereas in my windows box it works without any problems.
Error: ORA-01031 : Insufficient priveleges
I verified the service id entry in tnsnames.ora, i did not find any problem.
I've some metadata tables on one schema (abcref@db1) and users updates this table everyday. I need to replicate these tables to other schemas on same database (defdev@db1) and different database (deftest@db2) everyday. So i created materialized views on target schemas and refresh these through a pl/sql procedure. Now i'm getting error while refreshing the materialized view from defdev@db1 and the materialized view refreshes successfully from deftest@db2.
Granted select access on abcref@db1 tables to defdev@db1 and deftest@db2 tables via role.
Getting below error from defdev@db1 schema.
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SNAPSHOT_UTL", line 361
ORA-06512: at "SYS.DBMS_SNAPSHOT_UTL", line 443
ORA-06512: at line 1
Table on abcref@db1 schema
===========================
SQL> create table REF_PROD_CD
2 (
3 prod_cd VARCHAR2(5),
4 division_cd VARCHAR2(1),
5 brand_cd VARCHAR2(2)
6 );
[code]....
Now Using below procedure to refresh materialized views from Target schemas.
SQL> CREATE OR REPLACE PROCEDURE PR_REFRESH_MV IS
2 BEGIN
3 DBMS_MVIEW.REFRESH('REF_PROD_CD','C');
4 END;
5 /
Procedure created
I am getting a strange error while trying to create an MV.
<b><p>
Error report:
SQL Error: ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SNAPSHOT_UTL", line 1613
ORA-06512: at line 1
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password without the appropriate privilege. This error also occurs if
[code]....
I have a update statement that works fine when its run in SQL window but when i try it as part of a Stored Procedure its giving me the Insufficient privileges error on that table.
If i dont have privilege to update that table wont it not let me update while doing it outside the stored procedure as well?
from sysdba i grant to my user hospital creat any synonym but give me this error why ?
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> grant create any synonym to hospital
2 ;
Grant succeeded.
SQL> conn hospital
Enter password:
Connected.
SQL> create public synonym Sur
2 for surgeries;
create public synonym Sur
*
ERROR at line 1:
ORA-01031: insufficient privileges
create view TodaySurgeries
as select s.surgery "Surgery", p.full_name"Patient Name",e.full_name"Doctor Name",
f.floor_id"FloorID",r.room_id"RoomID",
to_char(s.surgery_date,'dd-mm-yyyy hh24:mi:ss')"Surgery Date"
from floors f,rooms r,employees e ,patients p, surgeries s
where f.floor_id=r.floor_id
and p.patient_id= s.patient_id
and r.room_id= s.room_id
and s.doctor_id= e.employee_id
I had been granted to the user grant session and resource
but the error is
create view TodaySurgeries
*
ERROR at line 1:
ORA-01031: insufficient privileges
how to grant compile access for stored procedures..? I got execute access so that i can execute procedure from another user but not able to save/modify once i edited.
i am trying to compile using SQL developer. Error Message :Error: ORA-01031: insufficient privileges
I usually work in oracle using the different editors like toad, plsql developer etc. I felt command line is good utility because of various supporting points. I am not sure what kind of command line tools is available/used. I am using pretty straight command line
(run->cmd, then enter username and password).
The best command line tools available. What is generally used command line tools.
I was a very contented software tester with SQLPlus skills when I had access to the classic version. I guess all things must come to an end as we have started seeing our systems under test migrate to 11g...and along comes the DOS prompt SQL*Plus.
Where I could previously ignore the cries that TOAD was better, I no longer have my right-click copy/paste option, and I don't know alot about the DOS prompt command line.
Our test lab administrator would like us to start working with SQL Developer for our testing needs...I am guessing because it installs automatically with the database. I read TOAD has a bit more functionality at this point(correct?)
What is better for a general database user with background of classic SQL Plus- the dos prompt SQL Plus or the more visual SQL developer?
how to get command history in sql*plus under windows
View 2 Replies View RelatedIn my sql*plus when i am writing the command ed .It was showing the error as \
SQL> ed
SP2-0110: Cannot create save file "afiedt.buf"
i tried to define the editor by using the command define_editor=notepad;
But still my problem was not solved.
I need to parse .sql file to tree and I can't find how to do it.
(We apply sql files by sqlplus and we have some problems with '/': after anonymous blocks - it haven't applied without '/'; Also not-anonymous block applied twice when we have both ';' and '/'. I need to report about problems before file will apply.) I've tried to use ANTLR with it grammar but it build awful tree.
I have installed oracle on my linux machne recently as an oracle2 user. To day i found my listener up when start my as database ( by logging in to the sqlplus ) sqlplus /nolog - i get into sqlplus
When i startup the database
SQL>startup - I get this error ORA-01031: insufficient privileges
I tried to check if my oracle user is in the dba and oinstall group. it wasn't
I added the user to the group by doing usermod -G dba,oinstall oracle2
i chek in the group to see if the user has been added to the group i see the user added but i still get the same error ORA-01031: insufficient privileges when i try to start the database.
I read some where that you can try to uncomment the SQLNET.AUTHENTICATION_SERVICES line on sqlnet.ora file but on by my file (SQLNET.ORA) there is only one line written (NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT))
i have three scheme in one instance for example
x,y and z
i create view in x as x_view
next step create view in y as y_view select from x_view ;
and finished, create another view in z as z_view select from y_view;
i gave grants to all user , but when i try this query with x user as select * from z.z_view get this message ORA-01031: insufficient privileges;
attention that connect as x and try select * from z.z_view
i have created a context from schema 'Schema1' using "accessed globally" option and created on package to set the values for conext. It is working fine.
When i deploy the same package on schema2 (remember the context is on schema1) and try to execute it on schema2 then it is giving me the following error.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - Production
SQL> exec krishna_pkg.MyProcedure
BEGIN krishna_pkg.MyProcedure; END;
*
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SESSION", line 90
ORA-06512: at "LGE2008DEV.KRISHNA_PKG", line 6
ORA-06512: at line 1
I installed 11g in my system.
Then I used to login as username@admin/password.
It returns error as ORA-12154: TNS:could not resolve the connect identifier specified.
After that I tried sqlplus "/ as sysdba"
it returns as ORA-01031: insufficient privileges
and then i set ORACLE_SID and then try sqlplus "/ as sysdba"
it returns ORA-12560: TNS:protocol adapter error.
I am able to start SQLPLUS from Start | Program files | Oracle - OraHome92 | Application development |
Unfortunately, when trying to start it from the "command prompt" window with the following command SQLPLUS, it generates the infamous error message like
"... unknown etc... "
Any variables i need to change on my client machine ?
1) I mistakenly changed my 'oracle_home' some days ago, as below: my computer --> environment variable ...
2) Then i realised that and edit the oracle home and saved as below: C:oracleproduct10.2.0db_1
But i am now not able to open sqlplus. it shows me the below error. 'sqlplus' is not recognized as internal or external command.
i am unable to login to oracle 10g as 'sys' as sysdba it is throwing an error like ORA-01031 insufficient privilidges for sys.but when i connect to database with username=system and password = oracle i am able to connect to database.
i have installed oracle 10g database on windows.so how should i resolve this error so that i can connect to the database as 'sys as sysdba'.
I use sqplus in oracle to output the command output to text file .
I use below set environment varialble.
SQL> set echo off;
SQL> set linesize 3999;
SQL> set feedback off;
SQL> set feedback off;
SQL> set termout off;
SQL> set pagesize 0;
SQL> spool mapping.txt
select C_SIM_MSISDN,C_SIM_IMSI from RCA_SMART_CARD order by C_SIM_MSISDN;
In ouput file , it look like
SQL> select C_SIM_MSISDN,C_SIM_IMSI from RCA_SMART_CARD order by C_SIM_MSISDN;
060010007 10007
:
:
:
SQL> spool off;
any setting or command that allow me to remove the first sql command line" SQL>select XXXX" and the last command "SQL>spool off" after start up the "spool mapping.txt"
I am trying to run PL/SQL Developer from command line, So it can open with an opened SQL WINDOW by default, with a script (which I specify in the command ) already in it:
I've tried:
"C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb
but it just opens the application with a connection, no file.
*CORRECTION* While I was writing this post, I tried something , which is not so sophisticated, and it appeared to work...
C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb "C:Program Files (x86)PLSQL Developerandrey.sql"
I'm trying to change a password. I can connect to the db then at the SQL prompt I'm using:
alter user <name> identified by <new password>
The dos window comes back with '2' - then just sits there
I need to run Toad codexpert using command line I am trying the following command
"C:Program Files... oad.exe" CX="C:... CmdLineTest.ini"
When I execte the command from command line .Codeexprt run and stop after some time and it make entry in the error log as "ora-00942 table or view does not exist".
Is it possible to ignore the sql command prompt and the command entered while spooling. I tried the to set echo off,term off and some more options but it did not work.
Example:
SQL> spool c: est.log
SQL> Prompt "This is a test"
"This is a test"
SQL> spool off;
The spool file has the following
SQL> Prompt "This is a test"
"This is a test"
SQL> spool off;
Is it possible to set some options so that the spool file only contains output.
"This is a test"
i am trying to create materialized view but it give me insufficient privilege i give it all grant and i run it from sys it give the same.
View 3 Replies View RelatedI have installed oracle 10g express edition, and created 2 users
1. DBA
2. HR -- is the normal application developement user.
When i issue the following query from DBA user, it works.
select * from dba_tab_cols; -- works fine for DBA user
select * from dba_tab_cols; -- doesnot work for HR user - invalid table name
When i try to issue the previage from DBA user like,
grant select on DBA_TAB_COLS to hr; -- DBA user says like, insufficient privileges.
I can not login my db using tnsname,how can i do?
SQL> connect / as sysdba
Connected.
SQL> connect sys/sys@dup_oracl as sysdba
ERROR:
ORA-01031: insufficient privileges