I am using the SQL*PLUS COPY command to move the data from my database to another remote database. The data in my database also contains DATETIME format. But since COPY command cannot handle DATETIME format, I am wondering is there any workaround for this.
Note: Due to some limitations, I cannot use other methods like DATABASE LINK or EXPDP/IMPDP commands.
In my sql*plus when i am writing the command ed .It was showing the error as \
SQL> ed
SP2-0110: Cannot create save file "afiedt.buf"
i tried to define the editor by using the command define_editor=notepad;
But still my problem was not solved.
I need to parse .sql file to tree and I can't find how to do it.
(We apply sql files by sqlplus and we have some problems with '/': after anonymous blocks - it haven't applied without '/'; Also not-anonymous block applied twice when we have both ';' and '/'. I need to report about problems before file will apply.) I've tried to use ANTLR with it grammar but it build awful tree.
I am able to start SQLPLUS from Start | Program files | Oracle - OraHome92 | Application development |
Unfortunately, when trying to start it from the "command prompt" window with the following command SQLPLUS, it generates the infamous error message like
"... unknown etc... "
Any variables i need to change on my client machine ?
I'm trying to change a password. I can connect to the db then at the SQL prompt I'm using:
alter user <name> identified by <new password>
The dos window comes back with '2' - then just sits there
When i try to copy a table within the database i get insufficient priv error.
SQL> COPY FROM JACK@JACK -
> CREATE T -
> USING SELECT * FROM JACK.T;
Enter FROM password:
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
ERROR:
ORA-01031: insufficient privileges
what privilege is required to perform this copy command ?
The way to create a short cut on desktop to have an sql*plus (command line).
i.e. I want to have an short cut on desktop when I click that short cut that would connect me to a specific database with a username and password (which i supply while creating the shortcut-I would provide the database name, username and password)
I use sqplus in oracle to output the command output to text file .
I use below set environment varialble.
SQL> set echo off;
SQL> set linesize 3999;
SQL> set feedback off;
SQL> set feedback off;
SQL> set termout off;
SQL> set pagesize 0;
SQL> spool mapping.txt
select C_SIM_MSISDN,C_SIM_IMSI from RCA_SMART_CARD order by C_SIM_MSISDN;
In ouput file , it look like
SQL> select C_SIM_MSISDN,C_SIM_IMSI from RCA_SMART_CARD order by C_SIM_MSISDN;
060010007 10007
:
:
:
SQL> spool off;
any setting or command that allow me to remove the first sql command line" SQL>select XXXX" and the last command "SQL>spool off" after start up the "spool mapping.txt"
i am trying to copy the data from a remote database which has Oracle 8i thru Sqlplus copy command to the local database which has Oracle 11gR2.
copy from abc/abc@remote
insert emp_new
using
select *
from emp_old
where rownum < 1001;
is it possible to copy the remote database thru sqlplus copy command ?
I want to add a value from sqlplus.
My scenario is like that i want to add the following value
select count(*) x from tab1
i need to connect several database, and each time i need to add with previous one. like that
connect a/a@db1;
select count(*) x from tab1;
then when i connect another db
connect b/b@db2;
select count(*) x from tab1;
x will add with previous one.
I am trying to do a case statement where I select to see if an ID exists or not and if it doesnt i want to run a .sql file but its not working properly.
select case when exists (select ID from VERSION where ID = '16.1')
then 'ID Exists'
else @script.sql
end
from dual;
Its not allowing me to run the @script.sql with the else statement.
I have a scenario where I want to exit out of SQLPLUS.
SQL> declare
2 x number(10) :=1;
3 y number(10) :=2;
4 begin
5 if x=y then
[code]...
Oracle client version whether it is of 32-bit or 64-bit.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:>sqlplus -v
SQL*Plus: Release 10.2.0.1.0 - Production
C:>
it shows me only version not bit information.is there any other command to get it.
I have a requirement to get a delimited output file by executing a select query.
For e.g.
select id, name, age from customers;
i need the output as,
id,name,age
123,devi,23
34,abi,20
4900,infy,23
i tried select id||','||name||','||age from customers;
but am getting the following output....
id||','||name||','||age
123,devi,23
34,abi,20
4900,infy,23
But i want to remove those pipes in between the column name.
I tried colsep also... but there am getting the output as.,
id,name,age
123, devi, 23
34, abi, 20
4900, infy, 23
some unwanted spaces in between...but i want the output as this...
id,name,age
123,devi,23
34,abi,20
4900,infy,23
the query which am using is stored in a .sql file.
I used the following command :
-------------------------------------------------
D:oracleproduct10.1.0Db_2jdkinjava -Djava.security.properties=D:oracleproduct10.1.0Db_2sqlplusadminiplusprovider -jar D:oracleproduct10.1.0Db_2oc4jj2eehomejazn.jar -user "iSQL*Plus DBA/admin" -password welcome -shell
--------------------------------------------------------
Output as follows:
--------------------------------------------
oracle.security.jazn.JAZNRuntimeException: Configuration file "configjazn.xml" does not exist. Check your JAAS configuration settings.at oracle.security.jazn.JAZNConfig.getJAZNProperties(Unknown Source)
... ... ...
Realm [iSQL*Plus DBA] does not exist in system.
-----------------------------------------------
what may be the reason for this error?
the reason for not availability of ISQLPLUS & SQLPLUSW window from oracle 11g.
View 3 Replies View RelatedI need generate a script like this.
spool loadvalues.sql
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM TABLE_NAME;
spool off;
I would like to substitute TABLE_NAME with each value from the following query;
select table_name from user_tables
where table_name like 'SALES%'
so there are about 45 SALES tables ex: SALES_IDAHO,SALES_MICHIGAN etc.so my spool file(loadvalues.sql) should look like this ex:
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM SALES_IDAHO;
sales_michingan should have script like
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM SALES_MICHIGAN;
I m currently written a sqlplus query and executing as below
sqlplus -s << !
set head off pages off trimspool on termout off
spool sysdate.txt
select sysdate from dual;
spool off
!
With this query the sysdate is getting written in the sysdate.txt but it is also getting printed in the screen/terminal., which I don't need to. Is their any options available for that.
Note: I came to know that "Termout off" will work only when we execute the query from a file and as a result I can still see the sysdate getting displayed in the screen.
How to find user name in sqlplus?
View 5 Replies View RelatedI usually work in oracle using the different editors like toad, plsql developer etc. I felt command line is good utility because of various supporting points. I am not sure what kind of command line tools is available/used. I am using pretty straight command line
(run->cmd, then enter username and password).
The best command line tools available. What is generally used command line tools.
I have some problem with '/' into the .sql files: after anonymous blocks - it haven't applied without '/'; Also not-anonymous block applied twice when we have both ';' and '/'. I need to report about problems before file will apply.)
how to handle these cases by a SQLPlus?
I am using Windows 7 and oracle 10g; From sqlplus* I can not use editor (using ed). but when I see the variable from DEFINE.. It shows that default editor is notepad..
I can use editor in winxp.How to get (use) editor ?
I have a .sql file that is used as a wrapper file that when executes within sqlplus (9.2.0.1.0), executes a bunch of .sql files within it. Example below:
WRAPPER.SQL
START D:ScriptsA.sql "'04-01-2012 00:00:00'"
START D:ScriptsB.sql "'04-01-2012 00:00:00'"
START D:ScriptsC.sql "'04-01-2012 00:00:00'"
START D:ScriptsD.sql "'04-01-2012 00:00:00'"
START D:ScriptsE.sql "'04-01-2012 00:00:00'"
EXIT;
Each of the .sql file (A,B,C,D,E) Spools individual output of sql statment within them. Each of the indv .sql file queries different tables with different filters(where) clause.
I would like to capture any error (OS,SQL,DB) into indv error file (A_ERROR.log). The reason being is because later in the process we need to validate if there were any errors before processing and loading the data into our SQL database
I have a shells script which invokes a SQL file. However even with AUTOCOMMIT OFF and on SQLERROR EXIT ROLLBACK. Sqlplus fails to rollback.
My sql file has 3 lines 3 are correct and 1 is incorrect. For example:
INSERT INTO TEST_ROUTING VALUES (24, 'ROUTING');
INSERT INTO TEST_ROUTING VALUES (25, 'ROUTING');
INSERT INTO TEST_ROUTING VALUES (26, 'ROUTING);
Lets say file is called 1.sql
My shell script invokes this SQL as follows: (Where $File1 = 1.sql)
$SQLPLUS_PATH/sqlplus -s /nolog <<-EOF>> ${LOGFILE}
connect $DB_USER/$Password1@$Database1
SET AUTOCOMMIT OFF
@$File1
WHENEVER SQLERROR EXIT ROLLBACK;
EOF
[code]......
So tried SET AUTOCOMMIT, tried SQLERROR ROLLBACK and tried few variations.
I try to login as SYS@sid AS SYSDBA When I login via TOAD, I am able to. However, as in (1), all my attempts to login from command-line SQL *Plus fails. The error I get is ORA-1031 Insufficient Privileges Even if I am on the physical server and try to run the SQL *Plus, I get the same error -- Insufficient Privileges
Here are the environment details:
Server: Windows Server 2008 R2
Server: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Client: Windows 7 Professional
Client: SQL*Plus: Release 11.2.0.1.0 Production
From within a DOS batch file I make the following call:
sqlplus [User]/[password]@[server] @batch_script.sql [Server] [User]
Within the file batch_script.sql I have the following lines:
spool output_batch.lst
connect &&2/[password]@&&1;
@SomeOtherFile.sql
I want to change the last line to something like this:
if &&1 = 'Something' then
@SomeOtherFile1.sql
else
@SomeOtherFile2.sql
end if;
I get the following result
SQL> if &&1 = "something" then
SP2-0734: unknown command beginning "if &&1 = "..." - rest of line ignored.
I took a shot at using the "If" statement and missed.
i do have a set of monthly process, where i need to run query one after the other. Some query will take one hours time to complete but some will take 10 hours or more to execute. My problem is that we have wait or machine shouldn't hang or log off during that time ...
I am executing the query in TOAD and windows SQL*Plus. Query can run Parallel at a time.
Is the there anyway to run the query in the background like what we do in the unix nohup command in toad?
I have a script which connects to Oracle and return 2 date value. few days back the database was down and when the script execute and return same garbage value in the spool file.
I added a exception handler WHENEVER SQLERROR EXIT 1 befor the connection start and after connection start. But in both the case it is also writing to the spool file.
I would like to exit the connection with a value <> 0 if any connection issue happens like (user id, password, database down error type of issue.) No information should go to the spool file
Output=`$ORACLE_HOME/bin/sqlplus -S /nolog << EOF
CONNECT $Usr/$Pwd@$Server
WHENEVER SQLERROR EXIT 1
spool ${ROOT_DIR}/.delta_date.tmp
[code]....
I was a very contented software tester with SQLPlus skills when I had access to the classic version. I guess all things must come to an end as we have started seeing our systems under test migrate to 11g...and along comes the DOS prompt SQL*Plus.
Where I could previously ignore the cries that TOAD was better, I no longer have my right-click copy/paste option, and I don't know alot about the DOS prompt command line.
Our test lab administrator would like us to start working with SQL Developer for our testing needs...I am guessing because it installs automatically with the database. I read TOAD has a bit more functionality at this point(correct?)
What is better for a general database user with background of classic SQL Plus- the dos prompt SQL Plus or the more visual SQL developer?
I have two scripts (test1.sql and test2.sql) that need to be executed one after the other. I would like to call them both using a single command line:
sqlplus testuser/testpwd@testdb @c: est1.sql @c: est2.sql
This does not work
creating a test3.sql script that calls test1.sql and test2.sql is not an option.