I'm trying to change a password. I can connect to the db then at the SQL prompt I'm using:
alter user <name> identified by <new password>
The dos window comes back with '2' - then just sits there
The way to create a short cut on desktop to have an sql*plus (command line).
i.e. I want to have an short cut on desktop when I click that short cut that would connect me to a specific database with a username and password (which i supply while creating the shortcut-I would provide the database name, username and password)
In my sql*plus when i am writing the command ed .It was showing the error as \
SQL> ed
SP2-0110: Cannot create save file "afiedt.buf"
i tried to define the editor by using the command define_editor=notepad;
But still my problem was not solved.
I need to parse .sql file to tree and I can't find how to do it.
(We apply sql files by sqlplus and we have some problems with '/': after anonymous blocks - it haven't applied without '/'; Also not-anonymous block applied twice when we have both ';' and '/'. I need to report about problems before file will apply.) I've tried to use ANTLR with it grammar but it build awful tree.
I usually work in oracle using the different editors like toad, plsql developer etc. I felt command line is good utility because of various supporting points. I am not sure what kind of command line tools is available/used. I am using pretty straight command line
(run->cmd, then enter username and password).
The best command line tools available. What is generally used command line tools.
I am able to start SQLPLUS from Start | Program files | Oracle - OraHome92 | Application development |
Unfortunately, when trying to start it from the "command prompt" window with the following command SQLPLUS, it generates the infamous error message like
"... unknown etc... "
Any variables i need to change on my client machine ?
I am trying to run PL/SQL Developer from command line, So it can open with an opened SQL WINDOW by default, with a script (which I specify in the command ) already in it:
I've tried:
"C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb
but it just opens the application with a connection, no file.
*CORRECTION* While I was writing this post, I tried something , which is not so sophisticated, and it appeared to work...
C:Program Files (x86)PLSQL Developerplsqldev.exe" userid=andrey/andrey@mydb "C:Program Files (x86)PLSQL Developerandrey.sql"
I need to run Toad codexpert using command line I am trying the following command
"C:Program Files... oad.exe" CX="C:... CmdLineTest.ini"
When I execte the command from command line .Codeexprt run and stop after some time and it make entry in the error log as "ora-00942 table or view does not exist".
I am using the SQL*PLUS COPY command to move the data from my database to another remote database. The data in my database also contains DATETIME format. But since COPY command cannot handle DATETIME format, I am wondering is there any workaround for this.
Note: Due to some limitations, I cannot use other methods like DATABASE LINK or EXPDP/IMPDP commands.
I have some Oracle Databases and sometimes for me is easier to access to the databases with SQLPLUS instead SQLDEVELOPER or TOAD.
But i can't reach to a good configuration of command line prompt to do queries against the database, normaly if it returns a lot o rows and columns it is unreadable.
When I try to connect using the mysql command line, I keep getting an error, I type this exactly:
SQL > Connect
Enter user-name: system
Enter password: (left blank b/c i can't type anything there)
and when I press enter I get the error, null password given, login denied.
I want to send mail whenever the schema password is changed by the developers (clients) . I created this trigger to send mail. I am able to know which schema's password is changed but i want know how to get the client details who is changing the password.
Create Trigger Pwd_chg_trigger
before alter
on database
declare
begin
if (ora_dict_obj_type = 'USER') then
DBMS_OUTPUT.PUT_LINE(' ORA_DICT_OBJ_OWNER = ' || ORA_DICT_OBJ_NAME); -- to know which schema
-- using the above value and additional formatting i am sending the mail using my SMTP
end if;
end;
/
we can't use the Exadata Plugin for Cloud Control but we need some monitoring of the Cell Servers.Does OS Watcher is the right tool or do we need ADRCI for incidents and so on.
What do have to install and what information do we get.
I want to add a value from sqlplus.
My scenario is like that i want to add the following value
select count(*) x from tab1
i need to connect several database, and each time i need to add with previous one. like that
connect a/a@db1;
select count(*) x from tab1;
then when i connect another db
connect b/b@db2;
select count(*) x from tab1;
x will add with previous one.
I am trying to do a case statement where I select to see if an ID exists or not and if it doesnt i want to run a .sql file but its not working properly.
select case when exists (select ID from VERSION where ID = '16.1')
then 'ID Exists'
else @script.sql
end
from dual;
Its not allowing me to run the @script.sql with the else statement.
I have a scenario where I want to exit out of SQLPLUS.
SQL> declare
2 x number(10) :=1;
3 y number(10) :=2;
4 begin
5 if x=y then
[code]...
Oracle client version whether it is of 32-bit or 64-bit.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:>sqlplus -v
SQL*Plus: Release 10.2.0.1.0 - Production
C:>
it shows me only version not bit information.is there any other command to get it.
I have a requirement to get a delimited output file by executing a select query.
For e.g.
select id, name, age from customers;
i need the output as,
id,name,age
123,devi,23
34,abi,20
4900,infy,23
i tried select id||','||name||','||age from customers;
but am getting the following output....
id||','||name||','||age
123,devi,23
34,abi,20
4900,infy,23
But i want to remove those pipes in between the column name.
I tried colsep also... but there am getting the output as.,
id,name,age
123, devi, 23
34, abi, 20
4900, infy, 23
some unwanted spaces in between...but i want the output as this...
id,name,age
123,devi,23
34,abi,20
4900,infy,23
the query which am using is stored in a .sql file.
I used the following command :
-------------------------------------------------
D:oracleproduct10.1.0Db_2jdkinjava -Djava.security.properties=D:oracleproduct10.1.0Db_2sqlplusadminiplusprovider -jar D:oracleproduct10.1.0Db_2oc4jj2eehomejazn.jar -user "iSQL*Plus DBA/admin" -password welcome -shell
--------------------------------------------------------
Output as follows:
--------------------------------------------
oracle.security.jazn.JAZNRuntimeException: Configuration file "configjazn.xml" does not exist. Check your JAAS configuration settings.at oracle.security.jazn.JAZNConfig.getJAZNProperties(Unknown Source)
... ... ...
Realm [iSQL*Plus DBA] does not exist in system.
-----------------------------------------------
what may be the reason for this error?
the reason for not availability of ISQLPLUS & SQLPLUSW window from oracle 11g.
View 3 Replies View RelatedI need generate a script like this.
spool loadvalues.sql
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM TABLE_NAME;
spool off;
I would like to substitute TABLE_NAME with each value from the following query;
select table_name from user_tables
where table_name like 'SALES%'
so there are about 45 SALES tables ex: SALES_IDAHO,SALES_MICHIGAN etc.so my spool file(loadvalues.sql) should look like this ex:
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM SALES_IDAHO;
sales_michingan should have script like
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM SALES_MICHIGAN;
I m currently written a sqlplus query and executing as below
sqlplus -s << !
set head off pages off trimspool on termout off
spool sysdate.txt
select sysdate from dual;
spool off
!
With this query the sysdate is getting written in the sysdate.txt but it is also getting printed in the screen/terminal., which I don't need to. Is their any options available for that.
Note: I came to know that "Termout off" will work only when we execute the query from a file and as a result I can still see the sysdate getting displayed in the screen.
How to find user name in sqlplus?
View 5 Replies View RelatedUsing SQL*Plus and having trouble getting each record to output on to one line. The fields I'm querying are:
TEMPLATEID NOT NULL NUMBER(10)
EXPERIMENTID NOT NULL NUMBER(10)
NAME VARCHAR2(200)
CREATEDATE DATE
Obviously, it's the NAME field causing me problems? Have tried using FORMAT, but no change in look of output.
COLUMN TEMPLATEID FORMAT 999999
COLUMN NAME FORMAT A40 WORD_WRAPPED
COLUMN EXPERIMENTID FORMAT 999999
I want to put some line in my .sql file. The below is my issue :-
SQL>spool /tmp/Tablespace_Remove.ksh
SQL>echo >#!/bin/ksh---- I want to enter this line to my Tablespace_Remove.ksh
SQL>spool off;
I have a question regarding SQL Developer. When opening a SQL Developer worksheet, there are two different panes or work areas; the upper pane contains the query code and the bottom pane contains the query results (output). Using the
Tools===Preferences tab, I was able to enable line numbering for the top pane (code) but I haven't figured out how to enable line numbering for the bottom pane (results area). how to enable line numbering for the bottom pane?
I have some problem with '/' into the .sql files: after anonymous blocks - it haven't applied without '/'; Also not-anonymous block applied twice when we have both ';' and '/'. I need to report about problems before file will apply.)
how to handle these cases by a SQLPlus?
I am using Windows 7 and oracle 10g; From sqlplus* I can not use editor (using ed). but when I see the variable from DEFINE.. It shows that default editor is notepad..
I can use editor in winxp.How to get (use) editor ?
I have a .sql file that is used as a wrapper file that when executes within sqlplus (9.2.0.1.0), executes a bunch of .sql files within it. Example below:
WRAPPER.SQL
START D:ScriptsA.sql "'04-01-2012 00:00:00'"
START D:ScriptsB.sql "'04-01-2012 00:00:00'"
START D:ScriptsC.sql "'04-01-2012 00:00:00'"
START D:ScriptsD.sql "'04-01-2012 00:00:00'"
START D:ScriptsE.sql "'04-01-2012 00:00:00'"
EXIT;
Each of the .sql file (A,B,C,D,E) Spools individual output of sql statment within them. Each of the indv .sql file queries different tables with different filters(where) clause.
I would like to capture any error (OS,SQL,DB) into indv error file (A_ERROR.log). The reason being is because later in the process we need to validate if there were any errors before processing and loading the data into our SQL database
I have a shells script which invokes a SQL file. However even with AUTOCOMMIT OFF and on SQLERROR EXIT ROLLBACK. Sqlplus fails to rollback.
My sql file has 3 lines 3 are correct and 1 is incorrect. For example:
INSERT INTO TEST_ROUTING VALUES (24, 'ROUTING');
INSERT INTO TEST_ROUTING VALUES (25, 'ROUTING');
INSERT INTO TEST_ROUTING VALUES (26, 'ROUTING);
Lets say file is called 1.sql
My shell script invokes this SQL as follows: (Where $File1 = 1.sql)
$SQLPLUS_PATH/sqlplus -s /nolog <<-EOF>> ${LOGFILE}
connect $DB_USER/$Password1@$Database1
SET AUTOCOMMIT OFF
@$File1
WHENEVER SQLERROR EXIT ROLLBACK;
EOF
[code]......
So tried SET AUTOCOMMIT, tried SQLERROR ROLLBACK and tried few variations.