how to grant compile access for stored procedures..? I got execute access so that i can execute procedure from another user but not able to save/modify once i edited.
i am trying to compile using SQL developer. Error Message :Error: ORA-01031: insufficient privileges
I am facing problems during login through sqlplus prompt.
It occurs in all the Linux boxes, with 10g and 11g databases, whereas in Windows it works good.
Sqlplus / as sysdba works good ( So there is no problem in OS Authentication)
Sqlplus sys/xxxx@SID as sysdba works good( Ther is no problem with password file)
But Sqlplus /@SID as sysdba is not working, It gives me an error message whereas in my windows box it works without any problems.
Error: ORA-01031 : Insufficient priveleges
I verified the service id entry in tnsnames.ora, i did not find any problem.
I've some metadata tables on one schema (abcref@db1) and users updates this table everyday. I need to replicate these tables to other schemas on same database (defdev@db1) and different database (deftest@db2) everyday. So i created materialized views on target schemas and refresh these through a pl/sql procedure. Now i'm getting error while refreshing the materialized view from defdev@db1 and the materialized view refreshes successfully from deftest@db2.
Granted select access on abcref@db1 tables to defdev@db1 and deftest@db2 tables via role.
Getting below error from defdev@db1 schema.
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SNAPSHOT_UTL", line 361
ORA-06512: at "SYS.DBMS_SNAPSHOT_UTL", line 443
ORA-06512: at line 1
Table on abcref@db1 schema
===========================
SQL> create table REF_PROD_CD
2 (
3 prod_cd VARCHAR2(5),
4 division_cd VARCHAR2(1),
5 brand_cd VARCHAR2(2)
6 );
[code]....
Now Using below procedure to refresh materialized views from Target schemas.
SQL> CREATE OR REPLACE PROCEDURE PR_REFRESH_MV IS
2 BEGIN
3 DBMS_MVIEW.REFRESH('REF_PROD_CD','C');
4 END;
5 /
Procedure created
I am getting a strange error while trying to create an MV.
<b><p>
Error report:
SQL Error: ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SNAPSHOT_UTL", line 1613
ORA-06512: at line 1
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password without the appropriate privilege. This error also occurs if
[code]....
from sysdba i grant to my user hospital creat any synonym but give me this error why ?
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> grant create any synonym to hospital
2 ;
Grant succeeded.
SQL> conn hospital
Enter password:
Connected.
SQL> create public synonym Sur
2 for surgeries;
create public synonym Sur
*
ERROR at line 1:
ORA-01031: insufficient privileges
create view TodaySurgeries
as select s.surgery "Surgery", p.full_name"Patient Name",e.full_name"Doctor Name",
f.floor_id"FloorID",r.room_id"RoomID",
to_char(s.surgery_date,'dd-mm-yyyy hh24:mi:ss')"Surgery Date"
from floors f,rooms r,employees e ,patients p, surgeries s
where f.floor_id=r.floor_id
and p.patient_id= s.patient_id
and r.room_id= s.room_id
and s.doctor_id= e.employee_id
I had been granted to the user grant session and resource
but the error is
create view TodaySurgeries
*
ERROR at line 1:
ORA-01031: insufficient privileges
i have three scheme in one instance for example
x,y and z
i create view in x as x_view
next step create view in y as y_view select from x_view ;
and finished, create another view in z as z_view select from y_view;
i gave grants to all user , but when i try this query with x user as select * from z.z_view get this message ORA-01031: insufficient privileges;
attention that connect as x and try select * from z.z_view
i have created a context from schema 'Schema1' using "accessed globally" option and created on package to set the values for conext. It is working fine.
When i deploy the same package on schema2 (remember the context is on schema1) and try to execute it on schema2 then it is giving me the following error.
Connected to:
Oracle Database 10g Release 10.2.0.1.0 - Production
SQL> exec krishna_pkg.MyProcedure
BEGIN krishna_pkg.MyProcedure; END;
*
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SESSION", line 90
ORA-06512: at "LGE2008DEV.KRISHNA_PKG", line 6
ORA-06512: at line 1
I can not login my db using tnsname,how can i do?
SQL> connect / as sysdba
Connected.
SQL> connect sys/sys@dup_oracl as sysdba
ERROR:
ORA-01031: insufficient privileges
When I try following SQL to retrieve records in some table XXXXX in the past point in time:
select * from XXXXX as of timestamp systimestamp-(6/24);
I am receiving following error:
ORA-01031: insufficient privileges
Without "as of timestamp" clause, it does run fine.Which privilege do I have to receive for above to work?
While trying to logging to database through pl/sql developer, getting error as "ORA-01031: insufficient privileges".But am able to logging by system.
As per the instruction by the below link, checked the privileges of ord_dba. All are correct. Now, i am in puzzle to rectify the error.
[URL]
I have a update statement that works fine when its run in SQL window but when i try it as part of a Stored Procedure its giving me the Insufficient privileges error on that table.
If i dont have privilege to update that table wont it not let me update while doing it outside the stored procedure as well?
I am new to Dynamic SQL..I create a procedure to get any DDL done against sample HR schema as follows.it goes well! Now when i try to test my procedure with some DDL command passing to the procedure i've created..strange! oracle throws an error as in the /*ERROR!!!!*/ block..
I don't understand why i am facing such an error..
/* Product an Version on my machine */
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
[code]...
When i try to copy a table within the database i get insufficient priv error.
SQL> COPY FROM JACK@JACK -
> CREATE T -
> USING SELECT * FROM JACK.T;
Enter FROM password:
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
ERROR:
ORA-01031: insufficient privileges
what privilege is required to perform this copy command ?
i am new to oracle,when i am compiling below procedure,
create or replace procedure GetTempPolicyDetails2(i_officeid in number,pr_cursor out SYS_REFCURSOR) as
L_QUEY VARCHAR2(4000):= 'select POLTMP.POLICY_ID,POLTMP.CORPORATE_NAME,POLTMP.POLICY_FROM_DATE,POLTMP.POLICY_TO_DATE,
POLTMP.NETPREMIUM_WITH_SERVICE_TAX,
IOF.OFFICENAME,UW.NAME,REG.REGNAME,brmstr.brokername,created_on
from policies_temp POLTMP
INNER JOIN ISSUINGOFFICE IOF ON IOF.ID=POLTMP.Divisionid
INNER JOIN REGION REG ON REG.ID=IOF.RID
INNER JOIN underwriters UW ON UW.ID=REG.UWID
LEFT OUTER JOIN broker_master BRMSTR ON BRMSTR.ID=POLTMP.Broker_Name
where POLTMP.Policy_Status=1 where 1=1'
L_WHERE VARCHAR2(4000):='WHERE 1=1';
[code]....
I'm getting the following error on a procedure that I was able to compile until today after some changes.
ORA-06550: line 354, column 20:
PLS-00103: Encountered the symbol "AND" when expecting one of the following:
. then or
The symbol ". was inserted before "AND" to continue.
I have installed oracle on my linux machne recently as an oracle2 user. To day i found my listener up when start my as database ( by logging in to the sqlplus ) sqlplus /nolog - i get into sqlplus
When i startup the database
SQL>startup - I get this error ORA-01031: insufficient privileges
I tried to check if my oracle user is in the dba and oinstall group. it wasn't
I added the user to the group by doing usermod -G dba,oinstall oracle2
i chek in the group to see if the user has been added to the group i see the user added but i still get the same error ORA-01031: insufficient privileges when i try to start the database.
I read some where that you can try to uncomment the SQLNET.AUTHENTICATION_SERVICES line on sqlnet.ora file but on by my file (SQLNET.ORA) there is only one line written (NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT))
I installed 11g in my system.
Then I used to login as username@admin/password.
It returns error as ORA-12154: TNS:could not resolve the connect identifier specified.
After that I tried sqlplus "/ as sysdba"
it returns as ORA-01031: insufficient privileges
and then i set ORACLE_SID and then try sqlplus "/ as sysdba"
it returns ORA-12560: TNS:protocol adapter error.
i am unable to login to oracle 10g as 'sys' as sysdba it is throwing an error like ORA-01031 insufficient privilidges for sys.but when i connect to database with username=system and password = oracle i am able to connect to database.
i have installed oracle 10g database on windows.so how should i resolve this error so that i can connect to the database as 'sys as sysdba'.
i am trying to create materialized view but it give me insufficient privilege i give it all grant and i run it from sys it give the same.
View 3 Replies View RelatedI have installed oracle 10g express edition, and created 2 users
1. DBA
2. HR -- is the normal application developement user.
When i issue the following query from DBA user, it works.
select * from dba_tab_cols; -- works fine for DBA user
select * from dba_tab_cols; -- doesnot work for HR user - invalid table name
When i try to issue the previage from DBA user like,
grant select on DBA_TAB_COLS to hr; -- DBA user says like, insufficient privileges.
WHEN I CONNECT TO SCOTT OR ANY KIND OF USER (EXCLUDE SYS)I CONNECT EASILY BUT PROBLEM WITH SCOTT OR OTHER THEY CANNOT BE
SHUTDOWN THE DATABASE AT THAT TIME THE ERROR ARISES ARE
ORA-01031: insufficient privileges SO OUR DATABASE CANT BE SHUT IT DOWN.
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> grant dba to temp;
Grant succeeded.
SQL> connect temp
Enter password:
Connected.
SQL>
SQL> create or replace procedure tempproc
2 is
3 begin
4 execute immediate 'create table temp_table(a varchar2(10))';
5 end;
6 /
Procedure created.
SQL> exec tempproc;
BEGIN tempproc; END;
*
ERROR at line 1:
ORA-01031: insufficient privileges
ORA-06512: at "TEMP.TEMPPROC", line 4
ORA-06512: at line 1
SQL>
SQL> declare
2 begin
3 execute immediate 'create table temp_table(a varchar2(10))';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> desc temp_table;
Name Null? Type
----------------------------------------- -------- ----------------------------
A VARCHAR2(10)
Why am I not able to create a table from procedure using execute immediate?
have an automated process which runs on an Oracle 8i database server as user abc. This process creates views/tables in other schemas, on the same database server, which point to objects owned by the abc user.
The issue I'm getting is that when I try to execute GRANT SELECT ON xyz.view123 TO PUBLIC as the abc user, I get an insufficient privileges.I should add that the abc user created the xyz.view123 table/view.
What grants/priviliges or whatever do I have to do to the abc schema?
SQL> conn sys as sysdba
Enter password:
ERROR:
ORA-01031: insufficient privileges
The oracle 11g installed in eucalyptus cloud..
In the same server I can connect as a different user 'd6' but not as sysdba.
CREATE MATERIALIZED VIEW Matview1
NOLOGGING
NOCACHE
NOPARALLEL
REFRESH COMPLETE ON DEMAND
START WITH sysdate
NEXT sysdate + 1
WITH ROWID
ENABLE QUERY REWRITE AS
select Query;
if i run select query it works fine .. also the user has create materialized view and query rewrite privs .. not sure why i am getting insufficient privileges error still ..
i am trying to configure a standby on grid infrstructure, on standby machine when i copied password file from primary i gave it the name orapwdg2 as dg2 is my sid for standby, on primary sid is dg1 and passwd file there is orapwdg1 why it is saying insufficient privileges, i am easily able to connect to primary with dg1 on primary, but not here on standby, everything is set oracle home sid everything but why insufficient privileges
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
[code]....
I have an automated process which runs on an Oracle 8i database server as user abc.This process creates views/tables in other schemas, on the same database server, which point to objects owned by the abc user.
The issue I'm getting is that when I try to execute GRANT SELECT ON xyz.view123 TO PUBLIC as the abc user, I get an insufficient privileges.I should add that the abc user created the xyz.view123 table/view.
What grants/priviliges or whatever do I have to do to the abc schema?
How to see the error Oracle is returning?
SQL> select owner, object_name, object_type from sys.dba_objects
2 where status = 'INVALID' order by owner;
OWNER
------------------------------
OBJECT_NAME
--------------------------------------------------------------------------------
OBJECT_TYPE
-------------------
CRMAPP
CRM
PACKAGE BODY
SQL> alter package CRMAPP.CRM compile;
Warning: Package altered with compilation errors.
SQL> show errors;
No errors.
SQL> select owner, object_name, object_type from sys.dba_objects
2 where status = 'INVALID' order by owner;
OWNER
------------------------------
OBJECT_NAME
--------------------------------------------------------------------------------
OBJECT_TYPE
-------------------
CRMAPP
CRM
PACKAGE BODY
When i compile the package body i get errors.
CREATE OR REPLACE PACKAGE BODY CEE_OSPCM_PKG AS
PROCEDURE CEEOT_WORK_TYPE_PRC IS
CURSOR CUR_WORK_TYPE IS
SELECT *
[code]...