I am trying to import data in the following user : core_edb_20112_ct/local
This user is already created , using the tablespace named C64_EDB_TS
The dmp file resides in the location dir_core20112 ( e:\oracle)
I am getting the following error while i try to import
Import: Release 11.2.0.1.0 - Production on Mon May 2 12:47:54 2011
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Produc
tion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-31694: master table "CORE_EDB_20112_CT"."SYS_IMPORT_FULL_01" failed to load/
unload
ORA-02354: error in exporting/importing data
ORA-02368: the following file is not valid for this load operation
ORA-02369: internal number in header in file e:\oracle\core_edb_20112_ct_20110426.dmp is not valid.
The DMP is copied from a different network location into the local drive where the command is running.
Is it possible to import a dump file using impdp data pump utility on oracle 10g where the export dump was taken using traditional exp utility and vice versa.
I am calling a stored procedure from a shell script. This stored procedure is having a CLOB object as an OUT parameter. How to write the data in CLOB object a existing file which is there in my client system. Below is the shell and sql scripts.
Shell script ( echo "hello" ) > /root/file.txt sqlplus -s $user/$pass@$tns @/root/proc.sql /root/file.txt << EOF EOFSQL script set pages 0 set trimspool off
[Code]...
spool offThis code writes contents of the OUT variable to file.txt, but my existing data ('hello') is lost.
I figured the it...Use append in the spool command...
I have a process to export a schema using expdp and import using impdp. Everything creates successfully except for a trigger. The trigger gives and error that the table or view does not exist. The account that I use to import the schema is different than the schema user but is a highly privileged account. I notice that the schema in the create or replace trigger line of code is remapped (I am using remapping in the impdp syntax) and the rest of the syntax of the trigger (which is just a sequence trigger for a primary key column) does not have the schema. In order to fix the issue, I have my bash script log into oracle as the schema user after the import of the schema and execute the trigger code. why do I have to do this for trigger code but not for other objects like views that create just fine.
I have imported schemas (impdp) from production database (10gR2, RHEL 64bit). One of the schemas has a db_link. The db_link points to a database that exists on the same server - both in production server and also on the new server where I imported the schemas. When I run a simple query in production using this db_link, it works but when I run the same query on the test server (where I imported the schemas), it gives me following error: ORA-02019: connection description for remote database not found I run this in prod database: Select count(1) from SOME_TABLE@my_link; when I run it in new database, it gives the above ORA error - even if I qualify the table and db_link with the schema owner like this: Select count(1) from the_owner.some_table@the_owner.my_link; NOTE: I am not running these queries as schema owner - I do not know the password. I am able to connect to both databases like this from the command prompt: $ sqlplus user@/password@db1$ sqlplus user@/password@db2 Does this mean that I need to recreate the db_link - perhaps every time I import?
I have a dumpfile from a database with hundreds of tablespaces. Do I need to remap all of them on impdp or is there a way to point all tables to a default tablespace? I mean, the source database has 200 tablespaces. The target database just 1.
I've got a schema that I've truncated all tables. I have a full schema export I took awhile back, and I'm wanting to import this into the schema to basically 'reset' it.
First time run, I got the :
ORA-39151: Table "xyz.tablename" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
I've been reading through, and see suggestions to add to the par file:
CONTENT=DATA_ONLY TABLE_EXISTS_ACTION=APPEND
And I've seen others use the option for:
table_exists_action=replace
I basically want to put the data back into the tables, and have the indexes rebuilt.....
i have more than 100 dumpfiles to import into my oracle 11g database. i know how to import(impdp) for same named dumps but here all the dumpfile names are totally different(ex: aa.dmp,bb.dmp,).
Should I be able to use network_link and remap_data together?I am trying to do three things at once:- copy data from one db to an other (prod to test)- change schema- mask sensitive dataI would like to avoid using dump files, import from network link would be nice. My initial testing is suggesting the answer is no.
When I use impdp with the following parameter file, sourcetable.column_to_remap is transferred without modifications, no data remapping is
done.userid=importinguser/XX@orcltables=sourceuser.sourcetabletable_exists_action=REPLACEremap_data=sourceuser.sourcetable.column_to_remap:remappgk.remapfnnetwork_link=source_linkremap_schema=sourceuser:importinguserdirectory=dumpdirlogfile=log_of_imp If i dump the data into file first and then import from file, data remapping is done as expected so I believe my remappkg is correct.
t there is something wrong with my parameter file and network_link&remap_data work together!
Edit: Testing is done with 11.2.0.1.0 at Windows Server 2008 R2 Edit2: More testing: 11.1.0.7@linux - Success!, Edit3: When writing "Edit2" I thought it worked at 11.2.0.1@linux but I was wrong (source data was already remapped). ==> So the answer is yes, they work together at version 11.1.0.7 and they don't seem to work at 11.2.0.1.
I've been using datapump for a long time now but I have not come across this problem before.
Importing just two tables: Table1 data=100Mb=11 million rows Table2 data=4.2Gb =19.6 million rows
Table1 ran for approx. 5 hours Table2 ran for approx. 15 hours
If I run the impdp importing both tables in the same par file the default tablespace of the users the import is running as runs out of space due to ORA-01691: unable to extend lob segment <owner>.SYS_LOG0001175799C00045$$ by 512 in tablespace USERS. I do not understand why it is creating objects in order to import tables into someone elses schema.
The environment is Red Hat LINUX 4.1.2-51 running Oracle 11.2.0.1 of Oracle11gR2. This is a 9 node RAC using ASM.
We have troubles with import of transportable tablespace, when i try to import it with system the import is done currectly, when i try to use another user we receive this message :
ORA-31626: il job non esiste ORA-31633: impossibile creare la tabella principale "BMCESE.SYS_IMPORT_TRANSPORTABLE_05" ORA-06512: a "SYS.DBMS_SYS_ERROR", line 95 ORA-06512: a "SYS.KUPV$FT", line 1020 ORA-00959: tablespace 'RMCCO_RMC_UTZ_PP080531' inesistente
this happens only on development server and it work into test server, so i don't think that the problem is in grants(i controlled that are the same and i have tried with DBA grant too and we received the error).Another strange thing is that tablespace 'RMCCO_RMC_UTZ_PP080531' is not included into the dump that i try to import and it doesn't exist in the database.
i'm writing a job to export data on a weekly basis and archive those data in-case needed to be re-imported in future, its important that we able to import successfully if ever needed.
can impdp perform checks to see if dumps are valid ?how about old imp?if not, will it be safe enough to rely on the export log file? in another word is it safe to assume its all safe if there is no error or warning in the exp log?
I'm going to import a single database using FS to a RAC on ASM both are in same server running oracle 11.2.0.3. So I was wondering if can I use network link mode of impdp without setting up a listener using 10gb Ethernet interface ?
I don’t want to incur the overhead of the tcp network layer because both DB single and Rac are on the same server.
I am try to import 4G dump in Oracle 11R2 version, in that we have around 9000+ Package Body which is taking huge time than other objects (about 8 to 12 hrs) and also it is expecting lots of system space (roughly about 10GB).
I have tried both parallel and non-parallel.how to improve speed of the package body import.
Details about the Schema & Import No. of objects in Schema
SQL> select object_type,count(1) from user_objects GROUP BY ROLLUP( object_type);
OBJECT_TYPE COUNT(1) ------------------- ---------- FUNCTION 248 INDEX 5161 JAVA CLASS 471 JAVA RESOURCE 1 JAVA SOURCE 16 LIBRARY 1
I'm currently moving an IOT from one database to another using expdp/imdp. The IOT is non-partitioned and about 100GB in size containing ~1,1 billion rows.
The dumpfile contains nothing else but the IOT. I'm importing with no special parameters, no pre-created IOT, just ordinary dumpfile import. (impdp username/password dumpfile=impdp:iot.dmp nologfile=y )
During import I got unable to extend TEMP errors from impdp.
ORA-39171: Job is experiencing a resumable wait. ORA-01652: unable to extend temp segment by 128 in tablespace TEMP ORA-39171: Job is experiencing a resumable wait. ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
I had to add 2 additional files to my Temp tablespace (total 96GB of temp) before the import could finish off.
Is this temp usage to be expected when importing IOT's ?
I am trying to import data from a dmp file created using expdp. Running on oracle 11g Express and getting following error, and tried to fix but could not succeeded, I have tables exist in POI schema and trying to import them in ghi schema. Created dmp file from poi shcema with two tables= '''REL20_AU_POI'',''ARCHIVE_POI''' and these tables do not exist in ghi schema
Not able to understand what's wrong with the code. I am trying to import data to a table using a CSV file. I have exported the data (CSV) from the interactive report and I am just trying to insert the same data to the table, through a process. When, I tried to do so; its throwing an error message saying NO_DATA_FOUND and file is not getting inserted into wwv_flow_files table.
But when I removed the data from the CSV file for the comments field and then tried importing the file, the process worked. I don't understand whats the problem with the code.
I have a sample app setup in my workspace for this weird problem.
[URL]
Workspace details:
CSV file with comments field and data in it - when trying to import - throws an error message NO_DATA_FOUND
CSV file with comments field and without data in it - tried importing - this worked
If I use the conventional path will SQL*Loader process a data file sequentially from top to bottom? I have a file comprised of header and detail records with no value found in the detail records that can be used to relate to the header records. The only option is to derive a header value via a sequence (nextval) and then populate the detail records with the same value pulled from the same sequence (currval). But for this to work SQL*Loader must process the file in the exact same sequence that the data has been written to the data file. I've read through the 11g Oracle® Database Utilities SQL*Loader sections looking for proof that this is what will happen but haven't found this information and I don't want to assume that SQL*Loader will always process the data file records sequentially.
I'm rying to import schema's from a dump file that came from a different environment.
What I have is:
1. dump file 2. log file of the export
I'm trying to import the file(containing three schemas) with remap_schemas, and it fails, gives a lot of ORA-00959: tablespace 'string' does not exist.
Now, I've read in OTN:
[URL]
that what you need to do in that case is to use the REMAP_TABLESPACE option,to redirect the objects to a different tablespace.
I don't see a name of the tablespace I'm getting the error for in the export log.I don't know if I have more tablespaces I have to redirect with REMAP_TABLESPACE.
I don't want to perform this 3 times, have an error, by that find out what's the next tablespace needing redirection and only then starting over...
How can I know from the dump file and the log file,what is the tablespace names i need for the redirection to my names? Or its just that the tablespace giving me the error is the only one in the dump file?
I am struggling with a simple data load using sqlldr
Ref: I am running Oracle 11.2 on Linux 5.7. =========================== Here is my table: SQL> desc ntwkrep.CARD Name Null? Type
[code]...
Looking at the actual data and counting the characters for the "REALIZES" column data, I see that it is roughly slightly over 1000 characters.
So, attempting various ideas to fix the problem, I tried changing nls_length_semantics to "char" and recreating the table, but this still didn't work and still got the same data load errors on the same rows.
Then, I changed nls_length_semantics back to byte and recreated the table again.This time, I altered the table manually as: SQL> ALTER TABLE ntwkrep.CARD MODIFY (REALIZES VARCHAR2(4000 char));
Table altered.
SQL> desc ntwkrep.card Name Null? Type ----------------------------------------------------------------- -------- -------------------------------------------- CIM_DESCRIPTION VARCHAR2(255) CIM_NAME NOT NULL VARCHAR2(255) COMPOSEDOF VARCHAR2(4000)
[code]...
Here is a copy of the first row of data which fails to load every time no matter how I change the "REALIZES" column in the table.
