Export/Import/SQL Loader :: Impdp With System But Doesn't Work With Another User?
Oct 10, 2012
We have troubles with import of transportable tablespace, when i try to import it with system the import is done currectly, when i try to use another user we receive this message :
impdp bmcese/***** directory=TTS_DIR dumpfile=RMCCO_RMC_ANA_STS_ABB_CO121001.dmp TRANSPORT_DATAFILES=/data/TTS/RMCCO_RMC_ANA_STS_ABB_CO121001.dbf logfile=tts_imp_proc.log
ORA-31626: il job non esiste
ORA-31633: impossibile creare la tabella principale "BMCESE.SYS_IMPORT_TRANSPORTABLE_05"
ORA-06512: a "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: a "SYS.KUPV$FT", line 1020
ORA-00959: tablespace 'RMCCO_RMC_UTZ_PP080531' inesistente
this happens only on development server and it work into test server, so i don't think that the problem is in grants(i controlled that are the same and i have tried with DBA grant too and we received the error).Another strange thing is that tablespace 'RMCCO_RMC_UTZ_PP080531' is not included into the dump that i try to import and it doesn't exist in the database.
View 4 Replies
ADVERTISEMENT
Oct 7, 2013
Should I be able to use network_link and remap_data together?I am trying to do three things at once:- copy data from one db to an other (prod to test)- change schema- mask sensitive dataI would like to avoid using dump files, import from network link would be nice. My initial testing is suggesting the answer is no.
When I use impdp with the following parameter file, sourcetable.column_to_remap is transferred without modifications, no data remapping is
done.userid=importinguser/XX@orcltables=sourceuser.sourcetabletable_exists_action=REPLACEremap_data=sourceuser.sourcetable.column_to_remap:remappgk.remapfnnetwork_link=source_linkremap_schema=sourceuser:importinguserdirectory=dumpdirlogfile=log_of_imp If i dump the data into file first and then import from file, data remapping is done as expected so I believe my remappkg is correct.
t there is something wrong with my parameter file and network_link&remap_data work together!
Edit: Testing is done with 11.2.0.1.0 at Windows Server 2008 R2
Edit2: More testing: 11.1.0.7@linux - Success!,
Edit3: When writing "Edit2" I thought it worked at 11.2.0.1@linux but I was wrong (source data was already remapped). ==> So the answer is yes, they work together at version 11.1.0.7 and they don't seem to work at 11.2.0.1.
View 0 Replies
View Related
Sep 17, 2013
I have imported schemas (impdp) from production database (10gR2, RHEL 64bit). One of the schemas has a db_link. The db_link points to a database that exists on the same server - both in production server and also on the new server where I imported the schemas. When I run a simple query in production using this db_link, it works but when I run the same query on the test server (where I imported the schemas), it gives me following error: ORA-02019: connection description for remote database not found I run this in prod database: Select count(1) from SOME_TABLE@my_link; when I run it in new database, it gives the above ORA error - even if I qualify the table and db_link with the schema owner like this: Select count(1) from the_owner.some_table@the_owner.my_link; NOTE: I am not running these queries as schema owner - I do not know the password. I am able to connect to both databases like this from the command prompt: $ sqlplus user@/password@db1$ sqlplus user@/password@db2 Does this mean that I need to recreate the db_link - perhaps every time I import?
View 6 Replies
View Related
Oct 18, 2012
I am using the following command for importing data in to oracle database 11g in linux box.
impdp system/test-123 directory=test_dir dumpfile=test.dmp logfile=test.log full=yes remap_schema=test1:test
Here test_dir = /u01/app/oracle/product/11.2.0/db_1/DATABASE/test/dmp
By default the test.log file is getting created in the above said dir (test_dir) but my requirement is I want to have it in a separate dir.
View 13 Replies
View Related
Jun 20, 2012
Can I use impdp to restore to a different database name? If yes what is the syntax? This is 10.2 on linux.
View 2 Replies
View Related
Oct 30, 2012
I have a dumpfile from a database with hundreds of tablespaces. Do I need to remap all of them on impdp or is there a way to point all tables to a default tablespace? I mean, the source database has 200 tablespaces. The target database just 1.
View 2 Replies
View Related
Aug 2, 2012
I've got a schema that I've truncated all tables. I have a full schema export I took awhile back, and I'm wanting to import this into the schema to basically 'reset' it.
First time run, I got the :
ORA-39151: Table "xyz.tablename" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
I've been reading through, and see suggestions to add to the par file:
CONTENT=DATA_ONLY TABLE_EXISTS_ACTION=APPEND
And I've seen others use the option for:
table_exists_action=replace
I basically want to put the data back into the tables, and have the indexes rebuilt.....
View 1 Replies
View Related
Jan 17, 2013
I am writing import dump, the dump is exported from user that i don't know it and tablespace i don't know it.
How can i for the import dump , from the user and tablespace inside the dump to my customized user
View 11 Replies
View Related
May 30, 2013
I've been using datapump for a long time now but I have not come across this problem before.
Importing just two tables: Table1 data=100Mb=11 million rows
Table2 data=4.2Gb =19.6 million rows
Table1 ran for approx. 5 hours
Table2 ran for approx. 15 hours
If I run the impdp importing both tables in the same par file the default tablespace of the users the import is running as runs out of space due to ORA-01691: unable to extend lob segment <owner>.SYS_LOG0001175799C00045$$ by 512 in tablespace USERS. I do not understand why it is creating objects in order to import tables into someone elses schema.
The environment is Red Hat LINUX 4.1.2-51 running Oracle 11.2.0.1 of Oracle11gR2. This is a 9 node RAC using ASM.
View 4 Replies
View Related
Mar 11, 2013
I'm curious to know if expdp or impdp is able to change object names during the process. What I mean by this is... can I export out procedures:
procedure1
procedure2
procedure3
Then import them like this:
test_procedure1
test_procedure2
test_procedure3
I'm not sure the expdp or impdp has that ability, but I could have missed it. I know how to remap a schema, but that only changes the schema name.
View 3 Replies
View Related
Jul 20, 2012
i'm writing a job to export data on a weekly basis and archive those data in-case needed to be re-imported in future, its important that we able to import successfully if ever needed.
can impdp perform checks to see if dumps are valid ?how about old imp?if not, will it be safe enough to rely on the export log file? in another word is it safe to assume its all safe if there is no error or warning in the exp log?
View 7 Replies
View Related
Apr 4, 2013
write a shell script to perform impdp using dbms_datapump using SILO concept .
View 9 Replies
View Related
Feb 12, 2013
I'm going to import a single database using FS to a RAC on ASM both are in same server running oracle 11.2.0.3. So I was wondering if can I use network link mode of impdp without setting up a listener using 10gb Ethernet interface ?
I don’t want to incur the overhead of the tcp network layer because both DB single and Rac are on the same server.
View 4 Replies
View Related
Aug 1, 2012
Env: RHEL 5.8 RAC 11.2.0.2
I'm currently moving an IOT from one database to another using expdp/imdp. The IOT is non-partitioned and about 100GB in size containing ~1,1 billion rows.
The dumpfile contains nothing else but the IOT. I'm importing with no special parameters, no pre-created IOT, just ordinary dumpfile import. (impdp username/password dumpfile=impdp:iot.dmp nologfile=y )
During import I got unable to extend TEMP errors from impdp.
ORA-39171: Job is experiencing a resumable wait.
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
ORA-39171: Job is experiencing a resumable wait.
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
I had to add 2 additional files to my Temp tablespace (total 96GB of temp) before the import could finish off.
Is this temp usage to be expected when importing IOT's ?
View 4 Replies
View Related
Jul 11, 2012
I have schema level export for user SAMPLE1(Default tablespace USERS) on oracle 9.2.0.1 production database. I want to import into another 9i database on another server, so do i nneed to Create SAMPLE1 user and USERS tablespace in new database again.
View 5 Replies
View Related
Jul 2, 2012
I am importing a dump into 11g Database, the dump taken from Old Financial release 6 [EBIZ]
i given this command:
IMP FILE=EXPDUMP.DMP BUFFER=524288000 FULL=Y IGNORE=Y
Import user system and password given...
Once its started and getting error
+"ALTER USER "PERFUSER" QUOTA UNLIMITED ON "OTHERD""+
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'PERFUSER' does not exist
[Code]....
what is the wrong,,
I have created all the data files same like Old Database. so while importing All the USERs will created, if its correct then why this "*ORA-01435 : User does not exist*" coming...
View 11 Replies
View Related
Aug 7, 2012
1) Is there a way to skip database jobs while exporting (EXPDP) ?
2) Is there a way to skip database jobs while importing (IMPDP) ?
View 3 Replies
View Related
Aug 9, 2012
Why do export-import require temporary tablespace? Since export-import do behave like DMLs, when does temporary tablespace be needed by datapump utility?
View 2 Replies
View Related
Nov 30, 2011
I have a test database with tables that occasionally has to be updated to the state of the production database tables. These databases both stream several tables to separate databases. (ie database A streams tables to database X and B to Y).
I export the needed schema daily from the production database "A". To update the test database "B", I import the needed tables from this export file. I then export the tables to be streamed from database B with the object_consistent=y parameter. I then import those tables to database Y using the streams_instantiation=y parameter.
So this is the process ...
1. Turn off capture on B
2. Turn off apply on Y
3. Drop the tables in B
4. Import tables from A to B
5. Prepare instantiation on tables in B (DBMS_CAPTURE_ADM.PREPARE_TABLE_INSTANTIATION)
6. Export from B with object_consistent=y
7. Drop tables in Y
8. Import from B to Y with streams_instantiation=y
9. Start apply on Y
10. Start capture on B
I ran this overnight through an OEM job and it appeared to work, just not how I expected. When I came in there was a lot of activity on both databases. All sessions were from the streams admin account. This continued for some time (long after the job had finished). During this time the "captured scn", "applied scn" & "last enqueued scn" values were quite different on the source side (didn't jot those down). I compared these ot the "last applied message number" on the target side and the valuse were quite a bit off.
After the activity subsided, the SCN values were all in the same ballpark. So I figure all the activity was changes getting applied from database B to database Y. I tested out the streaming and it's working fine.
I thought the parameters in the export and import statements were supposed to sync up the SCNs. That is I thought they would start off in the same state and there would be no need for applying changes. No one changed anything on the source database overnight.
I must not be understanding how the streams export/import parameters work.
View 5 Replies
View Related
Apr 20, 2011
I have a process to export a schema using expdp and import using impdp. Everything creates successfully except for a trigger. The trigger gives and error that the table or view does not exist. The account that I use to import the schema is different than the schema user but is a highly privileged account. I notice that the schema in the create or replace trigger line of code is remapped (I am using remapping in the impdp syntax) and the rest of the syntax of the trigger (which is just a sequence trigger for a primary key column) does not have the schema. In order to fix the issue, I have my bash script log into oracle as the schema user after the import of the schema and execute the trigger code. why do I have to do this for trigger code but not for other objects like views that create just fine.
View 2 Replies
View Related
Mar 18, 2013
I have a flat file (student.dat delimiter %~| ) using control file (student.ctl) through sql loader. Here are the details.
student.dat
student_id, student_firstname, gender, student_lastName, student_newId
101%~|abc%~|F %~|xyz%~|110%~|
Corresponding table
Student (
Student_ID,
Student_FN,
Gender,
Student_LN
)
How do i map student_newId field to student_id field in STUDENT DB table so that new id should be inserted in student_id column. How do i specify the mapping in control file. I dont want to create a new column in student table. In control file i will specify the below, Is this a best approach?. Do we have any othe way?
STUDENT_ID *(:STUDENT_NEWID)*,
STUDENT_FN,
GENDER,
STUDENT_LNAME,
STUDENT_NEWID BOUNDFILLER
View 1 Replies
View Related
Jun 22, 2012
MY DB Version: 10.2.o
OS: Windows Server 2003
I am trying to import on table which i have the export dump file which i take using expdp previously when i load that table on the same host
by using below command:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
after that i zip that dump and move it to external usb and now i need that table i copy that table and unzip that that dump
Command i am using to do the import is :
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
But the query of import is still runing even not showing any amount of rows to be imported.
i already make the tablespace in which the table was previosuly before dropping but when i check the sapce of tablespace that is also not consuming one error i got preiviously while performing this task is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_03" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_03": cdr/********@tsiindia directory=TEST_DIR dumpfile=CAT_IN_DATA_042012.DMP tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log
[code]....
i check streams_pool_size it will show zero and then i make it to 48M and after that
SQL> show parameter streams_pool_size;
NAME TYPE VALUE
-----------
streams_pool_size big integer 48M
But still it takes time
View 13 Replies
View Related
Sep 29, 2012
My database version
SQL> select * from v$version;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - ProductionOS version:
Windows 7 64bit I have schema(scott) export with schema level option and imported with different name as (scott1).At regular period of time i need to import the scott to scott1 without affecting existing records.such as
*1. Need to append new created records.*
*2. Need to append updated records.*
for the above requirement I did in the following way
expdp xxxx/******** schemas=SCOTT directory=dumpdir dumpfile=SCOTT_28-SEP-2012.dmp logfile=exp_SCOTT_28-SEP-2012.log imported in the following way impdp xxxx/******** AS SYSDBA REMAP_SCHEMA=SCOTT:SCOTT1 directory=DUMPDIR dumpfile=SCOTT_28-SEP-2012.dmp logfile=imp_SCOTT2_28-09-2012.log TRANSFORM=SEGMENT_ATTRIBUTES:n TABLE_EXISTS_ACTION=APPEND.
The problem is i couldn'table to append the records to existing tables the log error show such ways.
ORA-31684: Object type USER:"SCOTT1" already exists
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
[code].....
View 5 Replies
View Related
May 10, 2013
I am trying to run impdp over network to import tables only but i am getting an error saying not able to create metadata and the import fails
Here are the steps below,
1. Source database created a user and granted select on certain tables to the user.
2. Created a user in the Target database.
3. Created a public link as sys user in the target database.
4. granted imp and exp full database to both users and all the other privs.
5. Started the impdp from the target server.
The import fails with
$impdp abc/xyz directory=DATA_PUMP_DIR network_link=TESTAR logfile=net_import_proddev.log TABLES=impdb.abc parallel=12 REMAP_SCHEMA=IMPDB:ABC
Import: Release 11.2.0.3.0 - Production on Tue Apr 23 13:10:51 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Starting "IMPDB"."SYS_IMPORT_TABLE_01": abc/******** directory=DATA_PUMP_DIR network_link=TESTAR logfile=net_import_proddev.log TABLES=impdb.abc parallel=12 REMAP_SCHEMA=IMPDB:ABC
[code]....
View 14 Replies
View Related
Jul 9, 2013
aix 6.111.2.0.3 I have an expdp dump from prod to be imported to our test database.I have imported it using impdp, but to my surprise the tables were imported but lots of indexes were not created? even If I have used TRANSFORM=SEGMENT_ATTRIBUTES:N just to use the default USERS tablespace. How do I import the indexes separately, skipping the tables and other objects?
View 14 Replies
View Related
Jul 2, 2012
How to import data from excel(.xls) file to data base table
I have excel sheet(.xls) data details, I neet to upload details to data base table using procedure
excel sheet is not CSV file, so SQL Loader is not using
any alternative solution for this issue
View 3 Replies
View Related
Aug 16, 2013
I am using expdp command to export the table by specifying Query parameter. But i am unable to export the table based on the condition.
Ex:EXPDP username/password dumpfile=employee.dmp logfile=emp.log directory=DATADIR_EXP TABLES=EMPLOYEE query=EMPLOYEE:"UPDATED_TIME >= '04-JUN-13' AND UPDATED_TIME >= '05-AUG-13'" Estimate in progress using BLOCKS method...Processing object type TABLE_ EXPORT/ TABLE/ TABLE_ DATATotal estimation using BLOCKS method: 3 GBORA-31693: Table data object "<username>"."EMPLOYEE" failed to load/unload and is being skipped due to error:ORA-00933: SQL command not properly endedMaster table "<username>"."EMPLOYEE" successfully loaded/unloaded...Dump file set for <username>.SYS_EXPORT_TABLE_01 is: E:IMPDPemployee.dmpJob "<username>"."SYS_EXPORT_TABLE_01" completed with 1 error(s) at 12:34:45 Oracle 11g,
View 6 Replies
View Related
May 11, 2013
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query="WHERE E3RECV_DT LIKE '201305\%'" log=PGTB_IFDATA_conditional.log
View 1 Replies
View Related
Nov 23, 2012
I had just successfully finished a full importing from Oracle 9i DB to Oracle 11gR2 DB. My export was a full db export.
Prior to this importing, my 11g was a newly created DB with the default SYS, System etc.. schema. Their passwords is different from those in 9i.
However, i realised that after importing... their passwords in 11g was replaced by those passwords in 9i, including SYS and SYSTEM user...
View 5 Replies
View Related
May 24, 2013
I want to import data in a csv file by SQL Loader.
but , I don't want to import some illegal rows when the column 'name' is null
how can I modify the SQL Loader ctrl file?
View 1 Replies
View Related
