Export/Import/SQL Loader :: Impdp Index-organized Table And Temp Usage?
Aug 1, 2012
Env: RHEL 5.8 RAC 11.2.0.2
I'm currently moving an IOT from one database to another using expdp/imdp. The IOT is non-partitioned and about 100GB in size containing ~1,1 billion rows.
The dumpfile contains nothing else but the IOT. I'm importing with no special parameters, no pre-created IOT, just ordinary dumpfile import. (impdp username/password dumpfile=impdp:iot.dmp nologfile=y )
During import I got unable to extend TEMP errors from impdp.
ORA-39171: Job is experiencing a resumable wait.
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
ORA-39171: Job is experiencing a resumable wait.
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP
I had to add 2 additional files to my Temp tablespace (total 96GB of temp) before the import could finish off.
Is this temp usage to be expected when importing IOT's ?
View 4 Replies
ADVERTISEMENT
Sep 17, 2013
I have imported schemas (impdp) from production database (10gR2, RHEL 64bit). One of the schemas has a db_link. The db_link points to a database that exists on the same server - both in production server and also on the new server where I imported the schemas. When I run a simple query in production using this db_link, it works but when I run the same query on the test server (where I imported the schemas), it gives me following error: ORA-02019: connection description for remote database not found I run this in prod database: Select count(1) from SOME_TABLE@my_link; when I run it in new database, it gives the above ORA error - even if I qualify the table and db_link with the schema owner like this: Select count(1) from the_owner.some_table@the_owner.my_link; NOTE: I am not running these queries as schema owner - I do not know the password. I am able to connect to both databases like this from the command prompt: $ sqlplus user@/password@db1$ sqlplus user@/password@db2 Does this mean that I need to recreate the db_link - perhaps every time I import?
View 6 Replies
View Related
Oct 18, 2012
I am using the following command for importing data in to oracle database 11g in linux box.
impdp system/test-123 directory=test_dir dumpfile=test.dmp logfile=test.log full=yes remap_schema=test1:test
Here test_dir = /u01/app/oracle/product/11.2.0/db_1/DATABASE/test/dmp
By default the test.log file is getting created in the above said dir (test_dir) but my requirement is I want to have it in a separate dir.
View 13 Replies
View Related
Jun 20, 2012
Can I use impdp to restore to a different database name? If yes what is the syntax? This is 10.2 on linux.
View 2 Replies
View Related
Oct 30, 2012
I have a dumpfile from a database with hundreds of tablespaces. Do I need to remap all of them on impdp or is there a way to point all tables to a default tablespace? I mean, the source database has 200 tablespaces. The target database just 1.
View 2 Replies
View Related
Aug 2, 2012
I've got a schema that I've truncated all tables. I have a full schema export I took awhile back, and I'm wanting to import this into the schema to basically 'reset' it.
First time run, I got the :
ORA-39151: Table "xyz.tablename" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
I've been reading through, and see suggestions to add to the par file:
CONTENT=DATA_ONLY TABLE_EXISTS_ACTION=APPEND
And I've seen others use the option for:
table_exists_action=replace
I basically want to put the data back into the tables, and have the indexes rebuilt.....
View 1 Replies
View Related
Oct 7, 2013
Should I be able to use network_link and remap_data together?I am trying to do three things at once:- copy data from one db to an other (prod to test)- change schema- mask sensitive dataI would like to avoid using dump files, import from network link would be nice. My initial testing is suggesting the answer is no.
When I use impdp with the following parameter file, sourcetable.column_to_remap is transferred without modifications, no data remapping is
done.userid=importinguser/XX@orcltables=sourceuser.sourcetabletable_exists_action=REPLACEremap_data=sourceuser.sourcetable.column_to_remap:remappgk.remapfnnetwork_link=source_linkremap_schema=sourceuser:importinguserdirectory=dumpdirlogfile=log_of_imp If i dump the data into file first and then import from file, data remapping is done as expected so I believe my remappkg is correct.
t there is something wrong with my parameter file and network_link&remap_data work together!
Edit: Testing is done with 11.2.0.1.0 at Windows Server 2008 R2
Edit2: More testing: 11.1.0.7@linux - Success!,
Edit3: When writing "Edit2" I thought it worked at 11.2.0.1@linux but I was wrong (source data was already remapped). ==> So the answer is yes, they work together at version 11.1.0.7 and they don't seem to work at 11.2.0.1.
View 0 Replies
View Related
May 30, 2013
I've been using datapump for a long time now but I have not come across this problem before.
Importing just two tables: Table1 data=100Mb=11 million rows
Table2 data=4.2Gb =19.6 million rows
Table1 ran for approx. 5 hours
Table2 ran for approx. 15 hours
If I run the impdp importing both tables in the same par file the default tablespace of the users the import is running as runs out of space due to ORA-01691: unable to extend lob segment <owner>.SYS_LOG0001175799C00045$$ by 512 in tablespace USERS. I do not understand why it is creating objects in order to import tables into someone elses schema.
The environment is Red Hat LINUX 4.1.2-51 running Oracle 11.2.0.1 of Oracle11gR2. This is a 9 node RAC using ASM.
View 4 Replies
View Related
Mar 11, 2013
I'm curious to know if expdp or impdp is able to change object names during the process. What I mean by this is... can I export out procedures:
procedure1
procedure2
procedure3
Then import them like this:
test_procedure1
test_procedure2
test_procedure3
I'm not sure the expdp or impdp has that ability, but I could have missed it. I know how to remap a schema, but that only changes the schema name.
View 3 Replies
View Related
Oct 10, 2012
We have troubles with import of transportable tablespace, when i try to import it with system the import is done currectly, when i try to use another user we receive this message :
impdp bmcese/***** directory=TTS_DIR dumpfile=RMCCO_RMC_ANA_STS_ABB_CO121001.dmp TRANSPORT_DATAFILES=/data/TTS/RMCCO_RMC_ANA_STS_ABB_CO121001.dbf logfile=tts_imp_proc.log
ORA-31626: il job non esiste
ORA-31633: impossibile creare la tabella principale "BMCESE.SYS_IMPORT_TRANSPORTABLE_05"
ORA-06512: a "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: a "SYS.KUPV$FT", line 1020
ORA-00959: tablespace 'RMCCO_RMC_UTZ_PP080531' inesistente
this happens only on development server and it work into test server, so i don't think that the problem is in grants(i controlled that are the same and i have tried with DBA grant too and we received the error).Another strange thing is that tablespace 'RMCCO_RMC_UTZ_PP080531' is not included into the dump that i try to import and it doesn't exist in the database.
View 4 Replies
View Related
Jul 20, 2012
i'm writing a job to export data on a weekly basis and archive those data in-case needed to be re-imported in future, its important that we able to import successfully if ever needed.
can impdp perform checks to see if dumps are valid ?how about old imp?if not, will it be safe enough to rely on the export log file? in another word is it safe to assume its all safe if there is no error or warning in the exp log?
View 7 Replies
View Related
Apr 4, 2013
write a shell script to perform impdp using dbms_datapump using SILO concept .
View 9 Replies
View Related
Feb 12, 2013
I'm going to import a single database using FS to a RAC on ASM both are in same server running oracle 11.2.0.3. So I was wondering if can I use network link mode of impdp without setting up a listener using 10gb Ethernet interface ?
I don’t want to incur the overhead of the tcp network layer because both DB single and Rac are on the same server.
View 4 Replies
View Related
Jun 22, 2012
MY DB Version: 10.2.o
OS: Windows Server 2003
I am trying to import on table which i have the export dump file which i take using expdp previously when i load that table on the same host
by using below command:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
after that i zip that dump and move it to external usb and now i need that table i copy that table and unzip that that dump
Command i am using to do the import is :
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
But the query of import is still runing even not showing any amount of rows to be imported.
i already make the tablespace in which the table was previosuly before dropping but when i check the sapce of tablespace that is also not consuming one error i got preiviously while performing this task is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Master table "CDR"."SYS_IMPORT_TABLE_03" successfully loaded/unloaded
Starting "CDR"."SYS_IMPORT_TABLE_03": cdr/********@tsiindia directory=TEST_DIR dumpfile=CAT_IN_DATA_042012.DMP tables=CAT_IN_DATA_042012 logfile=impdpCAT_IN_DATA_042012.log
[code]....
i check streams_pool_size it will show zero and then i make it to 48M and after that
SQL> show parameter streams_pool_size;
NAME TYPE VALUE
-----------
streams_pool_size big integer 48M
But still it takes time
View 13 Replies
View Related
Jul 2, 2012
How to import data from excel(.xls) file to data base table
I have excel sheet(.xls) data details, I neet to upload details to data base table using procedure
excel sheet is not CSV file, so SQL Loader is not using
any alternative solution for this issue
View 3 Replies
View Related
Aug 16, 2013
I am using expdp command to export the table by specifying Query parameter. But i am unable to export the table based on the condition.
Ex:EXPDP username/password dumpfile=employee.dmp logfile=emp.log directory=DATADIR_EXP TABLES=EMPLOYEE query=EMPLOYEE:"UPDATED_TIME >= '04-JUN-13' AND UPDATED_TIME >= '05-AUG-13'" Estimate in progress using BLOCKS method...Processing object type TABLE_ EXPORT/ TABLE/ TABLE_ DATATotal estimation using BLOCKS method: 3 GBORA-31693: Table data object "<username>"."EMPLOYEE" failed to load/unload and is being skipped due to error:ORA-00933: SQL command not properly endedMaster table "<username>"."EMPLOYEE" successfully loaded/unloaded...Dump file set for <username>.SYS_EXPORT_TABLE_01 is: E:IMPDPemployee.dmpJob "<username>"."SYS_EXPORT_TABLE_01" completed with 1 error(s) at 12:34:45 Oracle 11g,
View 6 Replies
View Related
Apr 9, 2013
let us consider mytest schema is having 6 tables
tname tabtype
myt table
myaxpertlog table
abb table
ccc table
ddd table
xxx table
now from this schema i want full dump and also from myaxpertlog table i required metadata only not records.
c:> export mytest/log file=20130409mytest0904pm.dmp tables=(myaxpertlog) rows=n
if i tried i am get only one table but it does have records.
View 6 Replies
View Related
Sep 6, 2012
table already exist & its little data too, may have to imp rest of lost data, is this the right command?
imp SYSTEM/password FILE=file.dmp FROMUSER=black TOUSER=blake TABLES=(vcr_mappings, tablename2) ignore=Y CONSTRAINTS=n
scenerio2 (if have to drop & recreate the entire table) is this the right command?
imp SYSTEM/password FILE=file.dmp FROMUSER=black TOUSER=blake TABLES=(vcr_mappings, tablename2) ignore=Y
just for single table imp
View 2 Replies
View Related
Dec 22, 2012
I am trying to migrate a table to a new table that has the field sequence changed and also has a new field added. My main question is if it is possible to have datapump add values to the new field in the target table.For example:
-original table has fields a, b, d, c
-new table has fields b, c, d, a, e
I want to load the new table and also include adding values for field e. In this case, field e is a year field, so it should be loaded with '2012'..Does datapump have the ability to do this? Is reorganizing the fields going to cause me any problems? We are on oracle version 11.2.0.3
View 7 Replies
View Related
Jan 8, 2013
I want to export a table ( using exp or expdp ) from client machine. Dump file should be created to client machine.
Is this possible ? How to do this ?
View 3 Replies
View Related
Mar 17, 2013
We need to export a big table into a text file with Column delimiter '&|' and row delimiter '$#'.
DB Version is 10.2.0.2, the table size is around 4 GB.
View 2 Replies
View Related
Aug 31, 2012
I want to export table. That table was partitioned 322.if i query that table ,it's showing 322 lines .
object type :table partition.
expdp command for export the table.
View 3 Replies
View Related
Jan 12, 2013
oracle 11g.2 ASM with RAC under RHEL 5
we have 2 table same structure one of them is empty and the pther one is contain data the vendor do the insert as select but i found he is wrong due to there duplicated ,now i want to use export and then rename the table and then import but i need with export do a condition
exp user/pass tables=MTR_EPPC_CALLED_DATA file=MTR_EPPC_CALLED_DATA.dmp query="where callstarttime >=to_date('01122012','ddmmyyyy')
and callstarttime <=to_date('31122012','ddmmyyyy')"
but it's seem the query take one condition how can i use this above condition in export ???also my friend say there is way to insert with rowid is this possible ??
View 2 Replies
View Related
Dec 2, 2011
I am trying to take exp / imp for Index organized table.
View 16 Replies
View Related
Aug 7, 2012
1) Is there a way to skip database jobs while exporting (EXPDP) ?
2) Is there a way to skip database jobs while importing (IMPDP) ?
View 3 Replies
View Related
Aug 9, 2012
Why do export-import require temporary tablespace? Since export-import do behave like DMLs, when does temporary tablespace be needed by datapump utility?
View 2 Replies
View Related
Jun 14, 2013
to export a table aprtition we do table=(T1:P1,T1:P2) but what if I have to export, say 50 partitions do I have to write tables=(T1:P1,T1:P2 .......................................,T1:P50) Or is there a simple way to have it in a single go.
View 1 Replies
View Related
Aug 22, 2012
I am loading data from a .csv file to table. I tried to load by using EXTERNAL TABLES
Is there a way to specify null in external tables loaded if specific column has no data in the external file(CSV) being loaded ?
View 3 Replies
View Related
Jul 2, 2013
While exporting on 11g xe on windows 32, i got messageORA-31626: job does not existORA-31633: unable to create master table
"System.Sys_export_schema_06"ORA-06512: at "SYS.DBMS_SYS_ERROR", LINE 95ORA-06512: at "SYS.KUPV$FT", line 1020ORA-01658:
unable to create INITIAL EXTENT FOR segment in tablespace SYSTEM I checked and found there is no pace in table space 600(allocated) 600(used mb) 0(free mb) 1(used) Q1) Is there any table which i can empty to free some space in system schema.Q2) Is there any way to shift some space from other table space to system becuse i have free space inother table space.i could find many segments of system table space, can i delete few of them, if they are not used ?
View 7 Replies
View Related
Sep 18, 2012
I have a query regarding importing data in a partitioned table. let me make myself more clear with an example:
I have 1 month table that contains 30 partitions single partition for a single day on one machine say machine A. on another machine say machine B i create the same table with the same script which is on machine A for the same table. i loaded data till 1-15th of a month in Machine A table and rest of 15 -30 Days data into table on machine B at the end i want to import the data on partitioned table on machine B that is from 15th -30th to machine A table. I just want to know whether data is properly imported or not not or i need to specify something
I take export partition wise (15 -30th) 15 partitions dumps and imported into Machine A table. Is it possible that i can import day wise partition from 15th to 30th into a partitioned table which already contains data from 1st -15th partition.
I know this is possible
View 2 Replies
View Related
