I would like to know if it's possible to limit access to isqlplus to only one user in my case. I need to give access in read only mode to user in isqlplus.For that, I will create a oracle user with only select privilege on the tables, but I want to be sure that only this user will be used in isqlplus and not another.
View 1 Repliesi have a database nd only 10 users must allowed to access db at any point of time and sessions per user must be 1.that is only 10 users must be able to access the database.
View 6 Replies View RelatedAre you aware of any "Best Practice Document" to grant select accesses to users on databases. These users are developers which select data out of database for the investigation and application bug fix.
From time to time user want more and more access to different tables so that they can do investigation properly.
I need to find out which users have direct access to tables, not through the roles.
Is dba_tab_privs the right table to query or table_privileges is the correct one.
What is the difference between these two.
I have gone through the documentation but I am still not clear about the difference between them.
Let me know whatever your thoughts are on this.
My requirement is to disable access of sys user from all clients even they are providing correct password.
View 2 Replies View Related restrict access to page or component for particular user. when that user login , restricted page should not be visible to the user..
APEX Verison :4.2
How to give ROLE access to users in PL/SQL developer Tool..??
View 3 Replies View RelatedI have installed APEX on my local machine, created a workspace, and added a few users with roles.
I am creating an application, similar to a Library app, where I have a table that stores Books information (BOOK_ID, BOOK_NAME, etc). I'd like to create another table BOOK_USER with two columns, BOOK_ID and USER_ID. BOOK_ID would refer to the BOOKS table, and I want USER_ID to refer to the table that stores user details of the workspace that I am using. The data entry would happen from a page that has two LOVs, one for book name (using BOOK_ID as the value) and another for user name (USER_ID, or whatever field APEX uses to store user's ID). Can I do that in APEX? I've found ways to access and authenticate a user for a page, but how to get data of all users in the workspace? In other words, how to get all usernames in a LOV?
create table to ( name varchar2(1), b varchar2(4), c number);insert into toto values ( 'a','toto',1);insert into toto values ( 'a','fifi',10);insert into toto values ( 'a','gigi',999);insert into toto values ( 'a','lili',999);insert into toto values ( 'b','mimi',3);insert into toto values ( 'b','vivi',300);
I'm searching for a query which returns a FIRST row which contains MAX(c) for each name :
i.e. : a gigi 999 ( or "a lili 999" I don't care !!) b vivi 300
I want to work on isql*plus but i don't know how?!!?. whether i have to install it anywhere or what is the procedure to use it.?
View 2 Replies View RelatedI am using oracle 10 g on my pc .i have no issues while working on it but whenever i am not connected to the internet its says failed to connect.As most of the time i am not connected to the internet the isql plus browser would show the same error but the moment i connect to the inet,it works.
Is it that 10g isql plus wont work while not connected to internet ?
I am unable to open Oracle 9 iSQL window in internet explorer 6. And i have two oracle version installed in my system are 9i and 10g.Now i am able to open the iSQL windows of 10g but not the 9i. It's happen after installing the Oracle 10g in system.
how i open both the iSQL windows in my system the Oracle 9i and 10g
When I invoke SOAP Web-Service using APEX_WEB_SERVICE.MAKE_REQUEST, then I'm able to get response from web-service. However all German character are replaced by JUNK data. However data is coming fine when I test web-services using SOAP UI.
I tried to invoke web-service using UTL_HTTP. However when I use UTL_HTTP, then I'm getting following error.
ORA-24247: network access denied by access control list
<li> Why German characters are replaced by Junk data while invoking web-service from APEX, while it's working fine from SOAP UI
<li> When I can access web-service successfully using APEX_WEB_SERVICE, then why it's throwing ORA-24247 error when I call using UTL_HTTP?
DB: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
APEX: 4.0.2.00.07
Web-Server: EPG
SELECT * FROM NLS_DATABASE_PARAMETERS;
[code]...
I am having oracle database version 11.2.0.3.0 standard edition, where one of my users requirement is that he wanted to send mails from oracle database but he is getting below error
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at "HF_REPORTING.SEND_MAIL", line 12
ORA-06512: at line 18
is it possible to send mails from oracle database in STANDARD Edition?
While Running the proc,it's raising the below error.
Error report:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYS.UTL_SMTP", line 115
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "LISTER_SHIFT.SOLN_GENERIC_SENDMAIL", line 33
ORA-06512: at line 1
[code]....
I've written a .net program for inserting blobs into our database, and it works fine, except if the path has more than 30(+) characters. I've read that this is a limitation in oracle, but the actual contents being stored is just the filename, extension, and blob itself, so I'm not actually storing anything more than 30 characters.
View 4 Replies View RelatedI have just created a profile as below.
create profile test_idle limit idle_time 360;
When i queried the dba_profiles view, I observed that the LIMIT value mentioned as DEFAULT. what is the Default values for every resource name.
TEST_IDLE COMPOSITE_LIMITKERNEL DEFAULT
TEST_IDLE SESSIONS_PER_USERKERNELDEFAULT
TEST_IDLE CPU_PER_SESSIONKERNEL DEFAULT
TEST_IDLE CPU_PER_CALL KERNELDEFAULT
[code]...
For the another profile LIMIT value is mentioned as UNLIMITED.
Working on building an application which will be in C# (.NET 3.5) and some PL/SQL. However, for the tables which have to store the data, I added a column, comments, to the table and assigned it a data type CLOB. No big deal, except my PL/SQL function is giving me errors if the CLOB built from several varchar2 rows exceeds 4000 characters. I understand the varchar2 field is restricted in 10g, but I was under the impression there wasn't such a restriction on a CLOB (hence the reason we're using it.)
I end up getting:
ORA-6502: PL/SQL: numeric or value error: character string buffer too small
ORA-6512: at line 1
06502. 00000 - "PL/SQL: numeric or value error%s"
*Cause:
*Action:The db is 10g (will be upgrading to 11 in October, needs to work on both) on a Windows Server 2003 box (Archive/backup server and db)
I am using UTL_TCP package of Oracle to connect to remote server. As per my architecture, I am opening multiple connections TCP in the same Oracle session.
I have come arround the limiation of 16 connections with this package.
I want to write a procedure in such a way that the code in the proceduce should finish its work with in a given amount of time other wise it should exit from the procedure.
For example....
i am fetching data from a table and inserting into another table and i want ot finish this task within 10 mins if it does not i need to exit from the procedure.
Consider this query
select deptno, wm_concat(student_name) from id_student group by deptno;
I want to change this query in such a way that only 3 students per dept are listed.
I want to read a number of rows into an array of records.
I keep getting this error:
ERROR at line 1:
ORA-06532: Subscript outside of limit
here is the procedure:
CURSOR get_all_locations (type IN VARCHAR2) IS
SELECT
*
FROM group
WHERE type = type;
[code]...
I'm using Toad 11.6, I can see about 156 sessions for the database in the session browser but when I do a select from v$session, only 40 sessions are showing up. I was able to look at all the sessions until yesterday. I tried several views like v$session, v$open_cursor etc, but only 60 sessions show up. I'm connected to the database using same user login yesterday and this morning.. May be this user had some privileges revoked last night??If so is it possible to limit sessions in these views (v$session etc) but it's strange that I can see them in the session browser in Toad. 'm very confident that there are 156 sessions in the database but it's just that I'm not able to see them in the v$session etc views. I need to troubleshoot a session but it is not showing up in any views.
View 9 Replies View RelatedI have a problem with one table.. First of all:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
The problem table resides in a locally managed tablespace. About 10 millions records is added in this table every day. After 36 hours all these records moved to another (partitioned) table, so the size of data in the problem table always about 75 Gb. But the size of table is reached 157 Gb today, and it still growing. The results of dbms_space.space_usage are showed below:
Size of blocks with:
0-25% free space: 4726784
25-50% free space: 17301504
50-75% free space: 24920064
75-100% free space: 102418669568
full blocks: 54761594880Thus, a lot of blocks have 75-100% free space but the table constantly growing: during last 9 days the size increased from 123 to 157 Gb.
how to stop the table growing? It there any way to limit the table size in locally managed tablespace?
Let's consider such table that all rows fit into single block:
SQL> create table test as select rownum id, '$'||rownum name from dual connect by level <= 530;
Table created.
SQL> create index i_test on test(id);
Index created.
SQL>
SQL> begin
[code].....
why does approach with full scan take longer even if table occupies only one data block? PS. 11gR2
I'm looking for the information on:
•Limit of number of sub programs in a package.
•Limit of number of lines in a sub-program.
•Limit of number of statements in a sub-program.
I searched on net and found below useful information.
The size limit for PL/SQL stored database objects such as subprograms, triggers, and packages is the size of the Descriptive Intermediate Attributed Notation for Ada (DIANA) code in the shared pool in bytes. The Linux and UNIX limit on the size of the flattened DIANA/code size is 64K but the limit might be 32K on desktop platforms.
The most closely related number that a user can access is the PARSED_SIZE in the static data dictionary view *_OBJECT_SIZE. That gives the size of the DIANA in bytes as stored in the SYS.IDL_xxx$ tables. This is not the size in the shared pool. The size of the DIANA part of PL/SQL code (used during compilation) is significantly larger in the shared pool than it is in the system table.
is there any recommendation on limit of number of subprograms should exist in a package exist, If there is any guidelines/recommendation exist for these.
The following link states
Quote:
SESSIONS_PER_USER
Each instance maintains its own SESSIONS_PER_USER count. If SESSIONS_PER_USER is set to 1 for a user, the user can log on to the database more than once as long as each connection is from a different instance.
[URL].....
Of course the following is not working even when resource_limit is TRUE
ALTER PROFILE DEFAULT LIMIT SESSIONS_PER_USER 2;
How can I restrict a user to have limited sessions say 2 sessions across 4 node cluster? Presently I am checking the sessions logged in using sql+ and no connection pooling of front end etc. is involved.
In regard to the Oracle 4GB limit, what exactly is this limit? Is this the total size of the datafiles of the user defined tablespaces (excluding SYSTEM and UNDO) so if, for example, we have a 2.8Gb datafile, can we only add another 1.2Gb datafile.
or is it the total size of extents/segments in the user defined tablespace i.e. if we have a 2.8Gb datafile but the database data comes to only 1.7Gb, can we add another tablespace with a new 2.8Gb datafile to allow for another 1.7Gb schema.
I have a question regarding a selection limit from a list of values. The table where my IDs (unit_codes) come from has another column called 'points'. each ID has its own number of points. Is there a way to put a selection limit on the display field that points will be placed on?
FOR EXAMPLE: a course block has a selection limit of 70 points, A person named someguy selects :
music = 20 points
maths = 20 points
mathsXTRA = 40 points
**ALERT!!! - U can ONLY select 70 points worth of units**
I need to display the data as range , i have created one table along with inserts as below , i need the desired output as mentioned below.The range will start from field STMH_PM_CODE , it will get the first and last stmh_pm_code and stmh_pm_desc which are in the same combination of STMH_NO,STMH_JOB_NO,STMH_batch_no and stmh_rev_no,
SQL> CREATE TABLE OT_SHOP_TRANSMITTAL_TEST
2 (
3 STMH_NO VARCHAR2(15),
4 STMH_JOB_NO VARCHAR2(12),
5 STMH_BATCH_NO VARCHAR2(12),
6 STMH_PM_CODE VARCHAR2(35),
7 STMH_PM_DESC VARCHAR2(240),
8 STMH_REV_NO VARCHAR2(12)
9 );
Table created.
SQL> INSERT INTO OT_SHOP_TRANSMITTAL_TEST VALUES ('PR-1107-0001','1107040','0001','1107040-1001','FRAME','0');
1 row created.
SQL> INSERT INTO OT_SHOP_TRANSMITTAL_TEST VALUES ('PR-1107-0001','1107040','0001','1107040-1002',FRAME','0');
ERROR:
ORA-01756: quoted string not properly terminated
SQL> ED
Wrote file afiedt.buf
1* INSERT INTO OT_SHOP_TRANSMITTAL_TEST VALUES ('PR-1107-0001','1107040','0001','1107040-1002','FRAME','0')
SQL> /
1 row created.
SQL> INSERT INTO OT_SHOP_TRANSMITTAL_TEST VALUES ('PR-1107-0001','1107040','0001','1107040-1003','COLUMN','0');
1 row created.
SQL> INSERT INTO OT_SHOP_TRANSMITTAL_TEST VALUES ('PR-1107-0001','1107040','0002','1107040-1004','FRAME','0');
1 row created.
SQL> INSERT INTO OT_SHOP_TRANSMITTAL_TEST VALUES ('PR-1107-0001','1107040','0001','1107040-1005','FRAME','0');
1 row created.
SQL> COMMIT;
Commit complete.
-- i want it as below see the line in stmh_pm_desc the description gets added until there is a change in either stmh_batch_no or stmh_rev_no since we have stmh_pm_code 1107040-1004 with stmh_batch_no 0002 it goes to other line as a seperate new range and first one will stop with 1107-1003 as that is the last combination and new line or range will get added over again.
STMH_NO STMH_BATCH_NOSTMH_PM_CODE STMH_PM_DESCSTMH_REV_NO
PR-1107-000100011107040-1001 - 1107040-1003FRAME, COLUMN0
PR-1107-000100021107040-1004 FRAME 0
PR-1107-000100011107040-1005 FRAME 0