I have used FLASHBACK TABLE option in my oracle 10g database.
It works successfully but the indexes got system generated name after flashback table option.
how i get all the indexes with same name which was before flashback.
one of my user POM create one table using this statement
12:55:59 SQL> create table hello_world (emp_id number(4), emp_name varchar2(30))
;
Table created.
then insert some raw into this hello_world table
12:56:41 SQL> insert into hello_world values (1, 'Bill Gates');
1 row created.
12:57:51 SQL> insert into hello_world values (2, 'Steve Jobs');
1 row created.
13:00:32 SQL> insert into hello_world values (3, 'Chris Eaton');
1 row created.
13:01:19 SQL> commit;
Commit complete.
then i have drop this hello_world table
13:02:08 SQL> drop table hello_world;
Table dropped.;
then i have to connect with sys user
13:03:03 SQL> conn sys as sysdba
Enter password:
13:08:21 SQL> select current_timestamp from dual;
CURRENT_TIMESTAMP
---------------------------------------------------------------------------
13-MAY-11 01.10.21.691000 PM +05:30
[code].....
i flashback my this HELLO_WORLD table but why i cannot Flashback RAW of this table .what can i do if i want to flashback raw of this table which query i have to run,
Flashback table operations are not supported for the SYS user . I have found the above line in one of the article.
I don't know why the SYS user can not able to flash back the table.
I delete some of the data from a table unfortunately and make commit on that on my production server.
getting back my all data of this table only of last 15 minutes.
Can I use flashback in application, especially DBMS_FLASHBACK.TRANSACTION_BACKOUT. I import some information (from files) in my database and after that I want to revert that transaction(delete imported data). I did some test I took xid of the transaction from v$transaction and then executed
DBMS_FLASHBACK.TRANSACTION_BACKOUT
with that XID for parameter. Everything is fine but that time there was only one transaction, when there are many transaction how can I get the exact XID. I can use dbms_transaction.local_transaction_id to get information for transaction which is running. And when i tried to use flashback that way a deadlock occur and db killed the other transaction.
I've just found out that 12cR1 will not (in all likelihood) allow "flashback database" for pluggable DBs. Am I the only one disappointed by that ? I use flashback db (+replay) a lot to revert and replay automated tests and I had plans to consolidate tenths of test environments into PDBs.
View 3 Replies View RelatedI heard about flaskback data archive. can i get some short example to understand in practical way
View 11 Replies View RelatedI'am using Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit with the following:
db_flashback_retention_target 1440
undo_management AUTO
undo_retention 900
Is it possible to enable flashback only to some specific tables?
For example, we are only interested in the capability of flashback tables scott.emp and scott.dept, no more.
I fired following commands .
>create table t1(id number);
>create index indx_t1 on t1(id);
>drop table t1;
>flashback table t1 to before drop;
but when i fired
>select index_name , table_name from dba_indexes where table_name='T1';
it shows index name something like "BIN$QvTWVG3dTxmBBJ607f9CWQ==$0" so is their any way to recover that index name
Since tablespaces can be enabled/disbaled for flashback is there a query that can tell me the flashback status of each tablespace in my DB.
View 2 Replies View RelatedI need store history for two tables in my system. I thought that Flashback Data Archive will be the best option. There is also another ways to do this but don't focus on this. I need to to this by FDA (Flashback Data Archive);
So my prerequisite was to create tablespace and flash back archive, and alter table to be archived.
create tablespace audit_archive datafile 'd:oradata etaaudit_archive.ora' size 100M;
create flashback archive audit_flash_archive
tablespace audit_archive quota 10G retention 10 year;
alter table teta_admin.t_prac flashback archive audit_flash_archive;
and everything works fine but on sys user.
i can query this table using "as of timestamp" clause
select prac_id, imie, imie_2, nazwisko, nr_ew from teta_admin.t_prac as of timestamp to_timestamp('2011-08-23 08:20:00','yyyy-mm-dd hh24:mi:ss')
but final construction of idea was to create additional user (interface), grant select on teta_admin.t_prac object and query archive data from interface user. and this is point of my failure. this don't work on new user.
interface user have such sys privs:
SQL> SELECT * FROM dba_sys_privs
2 WHERE grantee = 'INTERFACE';
GRANTEE PRIVILEGE ADM
------------------------------ ---------------------------------------- ---
INTERFACE CREATE SESSION NO
and table privs:
SQL> SELECT * FROM dba_tab_privs
2 WHERE grantee = 'INTERFACE';
GRANTEE OWNER TABLE_NAME GRANTOR PRIVILEGE
------------------------------ ------------------------------ ------------------------------ ------------------------------ --------------------
INTERFACE TETA_ADMIN T_PRAC TETA_ADMIN INSERT
INTERFACE TETA_ADMIN T_PRAC TETA_ADMIN DELETE
INTERFACE TETA_ADMIN T_PRAC TETA_ADMIN ALTER
INTERFACE TETA_ADMIN T_PRAC TETA_ADMIN FLASHBACK
INTERFACE TETA_ADMIN T_PRAC TETA_ADMIN SELECT
what i need to do in order to query this flashback table from interface user. when i try to do this from this user oracle says ORA-00942.
what happen in standby when enable flashback in the primary database?
View 1 Replies View RelatedHow to delete flashback log and to release the space?
I guess that it maybe like archive log ,it can release the space using RMAN.But when i try a test ,it fail.
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE FLASHBACK OFF;
here's my settings
SYS@boston>SELECT ESTIMATED_FLASHBACK_SIZE FROM V$FLASHBACK_DATABASE_LOG;
ESTIMATED_FLASHBACK_SIZE
------------------------
45195264
SYS@boston>select name, value, issys_modifiable from v$parameter where name='db
_recovery_file_dest_size';
NAME
--------------------------------------------------------------------------------
VALUE
--------------------------------------------------------------------------------
ISSYS_MOD
---------
db_recovery_file_dest_size
9663676416
IMMEDIATE
SYS@boston>select * from v$recovery_file_dest;
NAME
--------------------------------------------------------------------------------
SPACE_LIMIT SPACE_USED SPACE_RECLAIMABLE NUMBER_OF_FILES
----------- ---------- ----------------- ---------------
D:Ora102chicagooston_recover
9663676416 1671241216 1103842304 50
SYS@boston>select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
------------ ------------------ ------------------------- ---------------
CONTROLFILE 0 0 0
ONLINELOG .04 0 1
ARCHIVELOG .16 .01 21
BACKUPPIECE 16.84 11.41 22
IMAGECOPY 0 0 0
FLASHBACKLOG .25 0 6
6 rows selected.
SYS@boston>
I have configured a flash recovery area of 9g yet the system keeps complaining that i have not enough flashback logs?
SPACE_RECLAIMABLE 1103842304
ESTIMATED_FLASHBACK_SIZE 45195264
the space_reclaimable is more than ESTIMATED_FLASHBACK_SIZE, so how is it possible the system always complain not enough space?
[URL].....
Quote:
SQL> SELECT TO_CHAR(STANDBY_BECAME_PRIMARY_SCN) FROM V$DATABASE;
it returns me 0, I try to flashback the now defunct former primary db chicago, the system complains. so how much is really enough?
from
[URL]......
Quote:
V$FLASHBACK_DATABASE_LOG
I have read it in books that flashback uses undo data to create the flashback data or to flashback the database to a time in the past.Then, what is the role of archive files in flashback operation. Why it is mandatory to turn on archiving before turning on flashback. Also, if you remove the latest archive files, you can NOT flashback the data to a time in past (Oracle complains of missing archive files).
View 8 Replies View RelatedMy Data Guard 's Enviroment:
Primary: 11.1.0.7 RAC 2 Nodes
Standby: 11.1.0.7 Single Instance
I want to implement Fast-Start Failover at my enviroment. Reading requirements, I found that Oracle Flashback is needed (I don't use Flashback on my databases).
Best Practices recommends 60 min (1 hr) for DB_FLASHBACK_RETENTION_TARGET if I just want to use Flashback to fast-start failover.
My questions:
What 's better, setup up flash recovery area on ASM or O.S. filesystem?
What is the recommended size for flash recovery area?
Is there anyway to backup Flashback Data Archive (FBDA) data and can be restore on new database. I cannot find Oracle's document or any document explain about backing up this data.
View 6 Replies View RelatedWhat is difference between the flashback database(10g later) and incomplete recover?
View 5 Replies View RelatedAs per Client requirement, i need to configure archive log and backups in flashback.
View 3 Replies View RelatedIf flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
View 1 Replies View RelatedThe undo_retention is used for read consistency, to avoid snapshot too old.Flashback database is using files in the db_recovery_file_dest.But whether undo_retention has any influence on Flashback drop; Flashback table or Flashback query?Let's say we have set undo_retention = 3600 = 1 hour.And
db_flashback_retention_target = 1440 = 24 hours.
Will it work Flashback drop; Flashback table; Flashback query to get 12 hours back?Additional question. Why Oracle sets undo_retention in seconds and db_flashback_retention_target in minutes?To use the same measure would be more user-friendly to DBAs .
I was about to move some tables from one table space to another but it seems it is not possible to move partitioned tables between table spaces of different block sizes.
So far the only option I have is to export and then import back the data.
know if there is any way to move a partitioned table between table spaces of different block size?
I have a requirement to import text files which are generated from 3d modelling software xsteel where it records all geometric information and i want to import this information into oracle table.
CREATE TABLE dstv_head ( wo_no VARCHAR2(12),struct VARCHAR2(12),rev_no NUMBER,
mark VARCHAR2(12),pos VARCHAR2(12),grade VARCHAR2(12),qty NUMBER,PROFILE VARCHAR2(24),TYPE VARCHAR2(12),
len NUMBER,width_web NUMBER,width_bottom NUMBER,flange_thk NUMBER,web_thk NUMBER,radius NUMBER,kgm NUMBER,
kgm1 NUMBER,kgm2 NUMBER,bevel_plus NUMBER,bevel_minus NUMBER,holes_yn VARCHAR2(1),holes_v_yn VARCHAR2(1),
hole_x_dim NUMBER,hole_y_dim NUMBER,hole_dia NUMBER,no_of_holes NUMBER)
-- All the data which has to go under specific field for example **9005.nc1 will go into wo_no field, 1239401A will go under struct.
ST
** 9005.nc1 --WO_NO
1239401A - STRUCT
1 -REV_NO
9005 -MARK
9005 --POS
S275JR --GRADE
2 --QTY
[code]....
primary key constraint on transaction_dtl_bk is affecting the insertion of next correct rows.
CREATE OR REPLACE PROCEDURE NP_DB.san_po_nt_wnpg_1 (
dt DATE
)
IS
v_sql_error VARCHAR2 (100); -- added by sanjiv
v_sqlcode VARCHAR2 (100); ---- added by sanjiv added by sanjiv
[code]...
Oracle 10g, Windows XP
There is an interface table and there is an normal transcational table..interface table is being compared with normal table and if match found the result is dumped into another normal table.
I am using two cursors one is to query the interface table and in a for loop pass the results to the second cursor..The interface table is having 5000 + rows and the transcation table is having more than 3.7 millions ..and the program is taking lots of time to execute..took almost 35-45 minutes..
create table x_interface /* INterface table */ -- 5000 + rows
( name varchar2(80), addr_line1 varchar2(35), addr_line2 varchar2(35), addr_line3 varchar2(35),
addr_line4 varchar2(35), addr_line5 varchar2(35), addr_line6 varchar2(35), suffix varchar2(35),
city varchar2(15), state varchar2(10), zcode varchar2(10))
[code]....
creating an sql script that can update info from one table in dbase1 to another table in dbase2 that has the same columns and if possible insert date and time in one column when the synchronized is done?
View 3 Replies View RelatedI am trying to execute dynamic SQL in Stored Function and I don't know how to do this.
Explanation:
In the function I am calling pr_createtab is procedure which will create a physical table and return the table name in the out variable v_tbl_nm.
I need to query on this dynamic table and return the result as return result. But i am not able to do it.
Here T_web_loylty_report_table is a type.
CREATE OR REPLACE function CDW_DSS.f_ReturnTable(i_mrkt_id in number, i_cmpgn_year in number)
return T_web_loylty_report_table is
v_tbl_nm varchar2(50);
i_cntry_cd varchar2(20);
v_sql_str varchar2(32567);
[code]......
We have to load 10 million rows in a table from another table based on the multiple joins. How much tablespace size we allocate to the table and for performance point of view how much should be the SGA size.
View 11 Replies View RelatedWe have a table in the client database that has two columns - column parent and column child. The whole hierarchy of DB table dependencies is held in this table.If Report 1 is dependent on Table A and Table A in turn is dependent on two tables Table M and Table N. Table N is dependent on table Z it will appear in the db table as,
Hierarchy Table
Parent Child
Report1Table A
Table ATable M
Table ATable N
Table NTable Z
Requirement :
From the above structure, we need to build a table which will hold the complete hierarchy by breaking it into multiple columns.The o/p should look like this
-ParentChild 1Child 2 Child 3
-Report1Table ATable M
-Report1Table ATable N Table Z
Child 1, Child 2, Child 3 ....and so on are columns.The number of tables and the no of hierarchical relationships are dynamic.
SQL Statements to create hierarchy table:
create table hierarchy (parent varchar2(20), child varchar2(20));
insert into hierarchy values ('Report1','Table A');
insert into hierarchy values ('Report1','Table B');
insert into hierarchy values ('Table A','Table M');
insert into hierarchy values ('Table B','Table N');
insert into hierarchy values ('Report2','Table P');
insert into hierarchy values ('Table M','Table X');
insert into hierarchy values ('Table N','Table Y');
insert into hierarchy values ('Report X','Table Z');
Approached already tried :
1) Using indentation : select lpad(' ',20*(level-1)) || to_char(child) P from hierarchy connect_by start with parent='Report1' connect by prior child=parent;
2)Using connect by path function :
select *
from (select parent,child,level,connect_by_isleaf as leaf, sys_connect_by_path(child,'/') as path
from hierarchy start with parent='Report1'
connect by prior child =parent) a where Leaf not in (0);
Both the approaches give the information but the hierarchy data appears in a single column.Ideally we would like data at each level to appear in a different column.
what command is used to create a table by copying the structure of another table including constraints ?
View 2 Replies View Related
