I am using oracle 10.2.0.3 in AIX
From client machine , i m not able to connect, it raise error
sqlplus t24/t24@pbldr
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Sep 23 16:21:46 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-03135: connection lost contact
Note : after restart the listener only one time I can able to login to database next time raise above error.
Yesterday everethig was fine and I were able to connect / as sysdba
When í try it today sqlplus freez and I have to kill that session from other terminal.
When I try to connect as normal user, I am getting this error.
normal user
[oracle@oracle admin]$ sqlplus surad@evidence
SQL*Plus: Release 11.1.0.7.0 - Production on Sat May 4 15:46:44 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-03135: connection lost contact
Process ID: 0
Session ID: 0 Serial number: 0
---
sysdba
[oracle@oracle admin]$ sqlplus /nolog
SQL*Plus: Release 11.1.0.7.0 - Production on Sat May 4 16:01:09 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
SQL> connect / as sysdba
--> There are waiting .... solution is to kill that session.
----
[oracle@oracle admin]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Sat May 4 16:04:06 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
--> There are waiting .... solution is to kill that session.
Since our upgrade from 10.2.0.4 to 11.2.0.3, we are experiencing occaisional overnight job failures throwing the ORA-03135 Connection lost contact errors. It doesn't happen often, but every once in a while. Even so, it is bugging me because I can't find anything wrong!
We have a dual server setup, with one IA64 HPUX 11.31 server hosting the database, and a second IA64 HP-UX 11.31 running all of the application code. I'm seeing errors in the Alert log that is pointing me to a specific cjq0 trace file, and the contents of that trace file are pretty much as follows:
*** 2013-08-15 02:05:45.541
Waited for process J001 to initialize for 107 seconds
*** 2013-08-15 02:05:45.544
Process diagnostic dump for J001, OS id=19302
-------------------------------------------------------------------------------
os thread scheduling delay history: (sampling every 1.000000 secs)
0.000000 secs at [ 02:05:45 ]
NOTE: scheduling delay has not been sampled for 0.312200 secs 0.000000 secs from [ 02:05:41 - 02:05:46 ], 5 sec avg
0.000000 secs from [ 02:04:46 - 02:05:46 ], 1 min avg
0.000031 secs from [ 02:00:45 - 02:05:46 ], 5 min avg
loadavg : 0.31 0.17 0.09
[code]....
There were jobs that completed successfully just prior to this failure, and subsequent jobs ran successfully as well. I'm stumped - not sure what's going on here. I have reviewed a lot of posts relative to the ORA-03135, and followed as many of the recommendations as I can, but I'm still seeing this errors periodically. Their frequency has not changed since I started applying these changes, so I know I haven't stumbled on the cause as yet.
I am using a database link from between oracle 10g enterprise & oracle 10g express edition on window based system.
We are getting below given error at one client system and others clients system is working fine..
ORA-02068: following server error from dblink name
ORA-03135: connection lost contact table name <tablename>
My application is using "Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production" and Oracle 11g client v11.1.0.6.0.My application server runs continuously and checks for new requests. But problem occurs when I do not send any request to my server for 40-45 minutes i.e. server is idle or doing nothing except checking new incoming requests for those 40-45 minutes. After that if I try to connect my server by sending some request, it shows following error message and my server crashes:
Message String: ORA-03135: connection lost contact
Process ID: 7586034
Session ID: 61
I have one query related to database connection from server to client.I have one database in the server and I want to connect from client.I set the tnsnames in client system as follows.
BAM240T_EARTH =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp)(HOST = 10.154.119.103)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = BAM_240T.ipdc.com)
)
)
The database name is : BAM_240T.ipdc.com
Sqlnet.ora entry is
NAMES.DIRECTORY_PATH= (TNSNAMES)
NAMES.DEFAULT_DOMAIN= ipdc.com
When I connect to server I m getting the following error.
$ tnsping BA240T_EARTH
TNS Ping Utility for Linux: Version 10.2.0.4.0 - Production on 15-JUL-2010 15:45:35
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/opt/oracle/product/10.2.0/db/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
Unable to connect to database getting below error
sqlplus sys/oracle@server_name/orcl
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Apr 12 11:07:15 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12518: TNS:listener could not hand off client connection
Below is alertlog entry
Completed: alter database open
Thu Apr 04 17:06:19 2013
db_recovery_file_dest_size of 4096 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
[code]...
Suppose my oracle database server IP is 128.1.1.100 in the office & the internet static IP is 115.118.33.100 is on that server. I want to retrieve the data by using oracle forms & report from my home's computer having different internet IP 115.118.33.25 on my home's computer.
what would be the settings on my home's computer for the same. i mean tnsname.ora file or any other setting.
We have two database instances on the same server. One was left at 9.2.0.7 and one was upgraded to 10.2.0.3. Connecting externally (sqlplus '/as sysdba') to the 9.2.0.7 database is lightning fast. Connecting externally to the 10.2.0.3 database is very slow, comparatively speakiing. This is on an IBM AIX-5L (64-bit) machine. We are using "tnsnames".
View 10 Replies View RelatedI have a two node RAC on 11.2.0.3. We are using SCAN Listener here. On my node 1, i can connect to the database using tns alias: The alias looks something like:
Prod =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = x1200.prod.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cusms)
(UR = A)
)
)
sqlplus system/actdbasystem@cusms ----- works sucesfully on the prod server. Even the same prod alias copied to second tnsnames.ora in the cluster and run, it works sucesful too. But the issue is, when we copy the same alias onto any other servers and try to connect give's the following error message:
SQL*Plus: Release 11.2.0.3.0 Production on Fri Jul 27 12:37:55 2012
Copyright © 1982, 2011, Oracle. All rights reserved.
ERROR:
ORA-12519: TNS:no appropriate service handler found
[code]...
why is it my connection using sqlplus works locally and not from other servers?
I want to add a value from sqlplus.
My scenario is like that i want to add the following value
select count(*) x from tab1
i need to connect several database, and each time i need to add with previous one. like that
connect a/a@db1;
select count(*) x from tab1;
then when i connect another db
connect b/b@db2;
select count(*) x from tab1;
x will add with previous one.
I am trying to do a case statement where I select to see if an ID exists or not and if it doesnt i want to run a .sql file but its not working properly.
select case when exists (select ID from VERSION where ID = '16.1')
then 'ID Exists'
else @script.sql
end
from dual;
Its not allowing me to run the @script.sql with the else statement.
I have a scenario where I want to exit out of SQLPLUS.
SQL> declare
2 x number(10) :=1;
3 y number(10) :=2;
4 begin
5 if x=y then
[code]...
Oracle client version whether it is of 32-bit or 64-bit.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:>sqlplus -v
SQL*Plus: Release 10.2.0.1.0 - Production
C:>
it shows me only version not bit information.is there any other command to get it.
I have a requirement to get a delimited output file by executing a select query.
For e.g.
select id, name, age from customers;
i need the output as,
id,name,age
123,devi,23
34,abi,20
4900,infy,23
i tried select id||','||name||','||age from customers;
but am getting the following output....
id||','||name||','||age
123,devi,23
34,abi,20
4900,infy,23
But i want to remove those pipes in between the column name.
I tried colsep also... but there am getting the output as.,
id,name,age
123, devi, 23
34, abi, 20
4900, infy, 23
some unwanted spaces in between...but i want the output as this...
id,name,age
123,devi,23
34,abi,20
4900,infy,23
the query which am using is stored in a .sql file.
I used the following command :
-------------------------------------------------
D:oracleproduct10.1.0Db_2jdkinjava -Djava.security.properties=D:oracleproduct10.1.0Db_2sqlplusadminiplusprovider -jar D:oracleproduct10.1.0Db_2oc4jj2eehomejazn.jar -user "iSQL*Plus DBA/admin" -password welcome -shell
--------------------------------------------------------
Output as follows:
--------------------------------------------
oracle.security.jazn.JAZNRuntimeException: Configuration file "configjazn.xml" does not exist. Check your JAAS configuration settings.at oracle.security.jazn.JAZNConfig.getJAZNProperties(Unknown Source)
... ... ...
Realm [iSQL*Plus DBA] does not exist in system.
-----------------------------------------------
what may be the reason for this error?
the reason for not availability of ISQLPLUS & SQLPLUSW window from oracle 11g.
View 3 Replies View RelatedI need generate a script like this.
spool loadvalues.sql
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM TABLE_NAME;
spool off;
I would like to substitute TABLE_NAME with each value from the following query;
select table_name from user_tables
where table_name like 'SALES%'
so there are about 45 SALES tables ex: SALES_IDAHO,SALES_MICHIGAN etc.so my spool file(loadvalues.sql) should look like this ex:
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM SALES_IDAHO;
sales_michingan should have script like
INSERT INTO SALES(column1, column2, column2) SELECT( COLUMN1, COLUMN2, COLUMN3) FROM SALES_MICHIGAN;
I m currently written a sqlplus query and executing as below
sqlplus -s << !
set head off pages off trimspool on termout off
spool sysdate.txt
select sysdate from dual;
spool off
!
With this query the sysdate is getting written in the sysdate.txt but it is also getting printed in the screen/terminal., which I don't need to. Is their any options available for that.
Note: I came to know that "Termout off" will work only when we execute the query from a file and as a result I can still see the sysdate getting displayed in the screen.
In my sql*plus when i am writing the command ed .It was showing the error as \
SQL> ed
SP2-0110: Cannot create save file "afiedt.buf"
i tried to define the editor by using the command define_editor=notepad;
But still my problem was not solved.
How to find user name in sqlplus?
View 5 Replies View RelatedI need to parse .sql file to tree and I can't find how to do it.
(We apply sql files by sqlplus and we have some problems with '/': after anonymous blocks - it haven't applied without '/'; Also not-anonymous block applied twice when we have both ';' and '/'. I need to report about problems before file will apply.) I've tried to use ANTLR with it grammar but it build awful tree.
I am able to start SQLPLUS from Start | Program files | Oracle - OraHome92 | Application development |
Unfortunately, when trying to start it from the "command prompt" window with the following command SQLPLUS, it generates the infamous error message like
"... unknown etc... "
Any variables i need to change on my client machine ?
I have some problem with '/' into the .sql files: after anonymous blocks - it haven't applied without '/'; Also not-anonymous block applied twice when we have both ';' and '/'. I need to report about problems before file will apply.)
how to handle these cases by a SQLPlus?
I am using Windows 7 and oracle 10g; From sqlplus* I can not use editor (using ed). but when I see the variable from DEFINE.. It shows that default editor is notepad..
I can use editor in winxp.How to get (use) editor ?
I have a .sql file that is used as a wrapper file that when executes within sqlplus (9.2.0.1.0), executes a bunch of .sql files within it. Example below:
WRAPPER.SQL
START D:ScriptsA.sql "'04-01-2012 00:00:00'"
START D:ScriptsB.sql "'04-01-2012 00:00:00'"
START D:ScriptsC.sql "'04-01-2012 00:00:00'"
START D:ScriptsD.sql "'04-01-2012 00:00:00'"
START D:ScriptsE.sql "'04-01-2012 00:00:00'"
EXIT;
Each of the .sql file (A,B,C,D,E) Spools individual output of sql statment within them. Each of the indv .sql file queries different tables with different filters(where) clause.
I would like to capture any error (OS,SQL,DB) into indv error file (A_ERROR.log). The reason being is because later in the process we need to validate if there were any errors before processing and loading the data into our SQL database
I have a shells script which invokes a SQL file. However even with AUTOCOMMIT OFF and on SQLERROR EXIT ROLLBACK. Sqlplus fails to rollback.
My sql file has 3 lines 3 are correct and 1 is incorrect. For example:
INSERT INTO TEST_ROUTING VALUES (24, 'ROUTING');
INSERT INTO TEST_ROUTING VALUES (25, 'ROUTING');
INSERT INTO TEST_ROUTING VALUES (26, 'ROUTING);
Lets say file is called 1.sql
My shell script invokes this SQL as follows: (Where $File1 = 1.sql)
$SQLPLUS_PATH/sqlplus -s /nolog <<-EOF>> ${LOGFILE}
connect $DB_USER/$Password1@$Database1
SET AUTOCOMMIT OFF
@$File1
WHENEVER SQLERROR EXIT ROLLBACK;
EOF
[code]......
So tried SET AUTOCOMMIT, tried SQLERROR ROLLBACK and tried few variations.
I try to login as SYS@sid AS SYSDBA When I login via TOAD, I am able to. However, as in (1), all my attempts to login from command-line SQL *Plus fails. The error I get is ORA-1031 Insufficient Privileges Even if I am on the physical server and try to run the SQL *Plus, I get the same error -- Insufficient Privileges
Here are the environment details:
Server: Windows Server 2008 R2
Server: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Client: Windows 7 Professional
Client: SQL*Plus: Release 11.2.0.1.0 Production
From within a DOS batch file I make the following call:
sqlplus [User]/[password]@[server] @batch_script.sql [Server] [User]
Within the file batch_script.sql I have the following lines:
spool output_batch.lst
connect &&2/[password]@&&1;
@SomeOtherFile.sql
I want to change the last line to something like this:
if &&1 = 'Something' then
@SomeOtherFile1.sql
else
@SomeOtherFile2.sql
end if;
I get the following result
SQL> if &&1 = "something" then
SP2-0734: unknown command beginning "if &&1 = "..." - rest of line ignored.
I took a shot at using the "If" statement and missed.
i do have a set of monthly process, where i need to run query one after the other. Some query will take one hours time to complete but some will take 10 hours or more to execute. My problem is that we have wait or machine shouldn't hang or log off during that time ...
I am executing the query in TOAD and windows SQL*Plus. Query can run Parallel at a time.
Is the there anyway to run the query in the background like what we do in the unix nohup command in toad?