XML DB :: Unable To Execute Sql Queries Using XDB Service
Aug 3, 2012
I am not able to execute sql queries using XDB service
My wsdl is
[URL]......
My manually written call is
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:oraw="http://xmlns.oracle.com/orawsv">
<soapenv:Header/>
<soapenv:Body>
<oraw:query>
<oraw:query_text type="SQL">select 1 from dual</oraw:query_text>
</oraw:query>
</soapenv:Body>
</soapenv:Envelope>
I have tried a few more flavors of soap envelope but I always get the below response instead of the actual response
The response is
<definitions name="orawsv" targetNamespace="http://xmlns.oracle.com/orawsv"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://xmlns.oracle.com/orawsv"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
[code].........
View 9 Replies
ADVERTISEMENT
Apr 29, 2013
We are getting problem while installing OID Infrastructure on one node.
metadata repository database: 10g R1 (10.1.0.2.0)
OID: 10g R1 (10.1.0.2.0)
We had installed in node 1 & now the partition is shifted to node2 ,But installation on OID infrasturcture, when we aretrying to connect repository database, it says, hostname:<PORT> service may not be avaialble, listener may not be up.unable to connect
orcl.test.com
whereas the service is running & listener is up. We copied inventory location and oraInst.loc and oratab file from node1 to node2, But still unable to connect metadata repository from infrastructure node.What are we missing here..
View 0 Replies
View Related
Apr 5, 2013
After upgrading to Apex 4.2 I'm now unable to test Report Queries. Each time I click on the Test Report button via Shared Components|Report Queries I recieve the following error message:
ORA-20001: The printing engine could not be reached because either the URL specified is incorrect or a proxy URL needs to be specified.
I still have Apex version 4.1 installed on a different server and it appears to be working fine.
View 1 Replies
View Related
Jun 4, 2013
We have the Oracle 11g XE database installed on a Windows 7 laptop. The Oracle XE database runs fine when the laptop not connected to a network, when connected to our corporate lan, or when connected to a cable-modem. However, when running under the Cisco AnyConnect VPN client, we are unable to connect to the Oracle XE service.
I have tried to resolve this, but am stuck. I do not if this issues is caused by:
1. There is no IPv6 address listed for the AnyConnect VPN (from ipconfig /all)?
2. Something regarding split-tunnelling that must be configured on the VPN?
3. Can the Oracle XE database run under an SSL VPN?
Below is the output of when I try to connect the Oracle XE service via sqlplus.
**************************
The OracleXETNSListener service is starting.
The OracleXETNSListener service was started successfully.
The OracleServiceXE service is starting..............
The OracleServiceXE service was started successfully.
C:ProgramDataoraclexeapporacleproduct11.2.0serverin>sqlplus system/password@XE
SQL*Plus: Release 11.2.0.2.0 Production on Fri May 31 07:03:24 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12546: TNS:permission denied
Enter user-name:
**************************
listeneralertlog,xml
<msg time='2013-05-31T07:03:24.950-04:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='DEV-M-137GF'
host_addr='fe80::2884:a03d:5286:7996%21'>
<txt>31-MAY-2013 07:03:24 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=XE)(CID=(PROGRAM=C:ProgramDataoraclexeapporacleproduct11.2.0serverinsqlplus.exe)(HOST=DEV-M-137GF)(USER=ptavolet))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.99.8.39)(PORT=56324)) * establish * XE * 12514
[code].........
**************************
listener racelistener.log file
Started with pid=3688
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\.pipeEXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV-M-137GF.paychex.com)(PORT=1521)))
[code]......
**************************
C:ProgramDataoraclexeapporacleproduct11.2.0serverin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 31-MAY-2013 07:07:43
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 31-MAY-2013 07:01:12
Uptime 0 days 0 hr. 6 min. 31 sec
[code].......
The command completed successfully
**************************
C:ProgramDataoraclexeapporacleproduct11.2.0serverin>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 31-MAY-2013 07:08:13
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
View 4 Replies
View Related
Aug 30, 2012
I tried to reinstall oracle 11g on windows 2008 R2 and couldn't complete the installation as i am unable to start the oracle service. The system gives the following error message
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1053) The service did not respond to the start or control request
in a timely fashion.
I try to manually create the service and it gives me the same error.I also tried to start the service using the net start as follows
C:UsersAdministrator>net start oracleserviceprod
The service is not responding to the control function.
Having looked at the event viewer in windows, I noticed three different error messages as followsr
Application popup: Microsoft Visual C++ Runtime Library : Runtime Error!
Program: c:appadministratorproduct11.2.0dbhome_1inORACLE.EXE
R6034
An application has made an attempt to load the C runtime library incorrectly.and then A timeout was reached (30000 milliseconds) while waiting for the OracleServiceprod service to connect.
The OracleServiceprod service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
View 26 Replies
View Related
Oct 26, 2010
I had installed forms6i on windows7 but ifbld60.exe file unable to execute so i want to know is this os problem or need patch to run it.
View 1 Replies
View Related
Jan 23, 2007
our system has always been running on mysql database and recently we have switched to oracle. As the current system is coded using mysql query syntax, when i run this program using oracle database, i got a error. The language that I'm using is JSP.
this is the error message:
The following query could not run on oracle. To convert these mysql queries to oracle compatible queries.
SELECT productID,productName FROM products order by productName;
select newsID,newsDate,newsHeadLine1 from news order by newsDate Desc limit 3
SELECT fuji_products.productID, productName_Display FROM products,products_availability where products_availability.productID=products.productID and (product_status='enabled' or product_status='all') AND category='12'
SELECT catID, catSub1 from category where catSub = '"+ prodCat +"' AND catSub1 is not null group by catSub1 order by catSub1
View 6 Replies
View Related
Oct 23, 2013
I'm working with old code that uses dbms_sql.execute to build/execute dynamic sql. In our case, the user can select varying columns(I think up to 20) with different where conditions as needed.
After building the sql, here's an example
WITH ph AS
(SELECT ph.* FROM po_header ph WHERE 1 = 2),
pf AS
(SELECT DISTINCT pf.order_id, pf.fund
FROM po_fau pf, ph
WHERE 1 = 1
AND ph.order_id = pf.order_id
[code]....
Where table records for
po_header = ~567746
po_fau = ~2153570
and PK "order_id" is a NUMBER(10) not null and a snippet of the code looks like
nDDL_Cursor := dbms_sql.open_cursor;
dbms_sql.parse(nDDL_Cursor, sSQLStr, 2);
FOR x IN 1 .. nCols LOOP
sCols(x) := '';
dbms_sql.define_column(nDDL_Cursor, x, sCols(x), 100);
END LOOP;
nError := dbms_sql.execute(nDDL_cursor);
why when the "execute" statement is fired off the elapsed time takes ~4.5 seconds but If I change "1 = 1" above to "1 = 2" it takes ~.2 seconds. If I run the above query interactively it takes ~.2 seconds. Shouldn't the above query when joining
ph.order_id = pf.order_id
return zero rows back instantly or does the "dbms_sql_execute" do some other type of parsing internally that takes cpu time.
View 14 Replies
View Related
Jan 8, 2009
We can execute dynamic sql using both execute immediate and ref cursor..But what is the difference between the two and performance-wise which is better?
View 5 Replies
View Related
Nov 12, 2012
is there any difference between
- returning from the procedure 2 ref cursors containing result set of 2 queries
- returning from the procedure 1 ref cursor containing result set of that 2 queries as one (with UNION ALL)?
Will 2nd option be faster or similar to 1st?
View 1 Replies
View Related
Jun 16, 2009
I have a table similar to the following,
USER, DETAILS, TYPE, UPDATED
1, user1home1, 1, 01/05/2009
1, user1home2, 1, 02/05/2009
1, user1work, 2, 03/05/2009
1, user1mobile1, 3, 04/05/2009
1, user1mobile2, 3, 05/05/2009
1, user1email, 4, 06/05/2009
1, user1other, 5 ,07/05/2009
2, user2home1, 1, 01/05/2009
2, user2home2, 1, 02/05/2009
[code]...
which contains multiple contact details for users of different types; type 1 is home, type 2 work etc. The following query returns the user's number and the latest home number for that user.
select user, details as latest_home_number from nc_test t
where type = 1
and updated = (select max(updated) from nc_test t2
where t2.user = t.user
and t2.type = t.type)
order by t.user
However I am not very experienced with sql and I am not sure how to create a view which would contain the fields:
user, latest_home_number, latest_work_number
View 3 Replies
View Related
May 1, 2011
I have performance problem with 7 queries involving groupby clauses in OLAP database.These are queries triggered during siebel DAC run
kumar[size="4"][/size][color="#0000FF"][/color]kumardba
View 5 Replies
View Related
Nov 16, 2006
I have to change some queries from SQL to Oracle but I couldn't convert these queries because they use some system tables in SQL that I don't know the equivalent Oracle tables. Following are SQL Queries
1. SELECT name, xtype FROM sysobjects WHERE xtype IN('U', 'V') AND name <> 'dtProperties' AND objectproperty(id, 'IsMSShipped') = 0 ORDER BY name
2. SELECT tS.name FROM sysobjects AS tS WHERE (tS.name IN (SELECT name FROM sysobjects WHERE xtype = 'U') AND xtype ='U') OR (tS.name IN (SELECT name FROM sysobjects WHERE xtype = 'V') AND xtype ='V')
3. SELECT o.name as TableName, c.name as FieldName, c.colid as Field_Ordinal, t.name as FieldType, c.length as FieldLength, c.prec as FieldPrecision, c.scale as FieldScale, c.isnullable, c.iscomputed, CASE WHEN c.status & 0x80 > 0 THEN 1 ELSE 0 END AS isidentity, columnproperty(o.id, c.name, 'IsRowGuidCol') as isrowguidcol FROM (sysobjects o JOIN syscolumns c ON o.id = c.id) JOIN systypes t On c.xtype = t.xtype WHERE o.xtype IN ('U', 'V') AND (t.xtype = t.xusertype)
View 2 Replies
View Related
Feb 2, 2005
On a tab page should be displayed the result of four indifferent queries, each based on a stored procedure.At the moment, the queries are processed serially, by the statements:
GO_BLOCK('one');
CLEAR_BLOCK(No_Validate);
EXECUTE_QUERY;
GO_BLOCK('two');
CLEAR_BLOCK(No_Validate);
EXECUTE_QUERY;
Is there a way to processes the queries parallel ?
View 1 Replies
View Related
Jul 30, 2012
We have the following case: an application modifies a table in an Oracle db (10.2.0.3.0).
Unfortunately the update SQL statements from the application always use the condition "where Column1 = 'some given value'" which is wrong (never mind why).
It should be instead "where Column1 = 'some value' and Column2 = 'val for Column2'. The 'val for Column2 will be taken from the very SQL query being issued (we can make the application do an update for Column2 even if the value in it never changes).
So all the update queries from the application look at the moment like that:
"update my_table set Column2 = 'val for Column2', Column3 = 'some other values', Column4 = 'some other value' where Column1 = 'some given value'".
We would like to capture them and somehow on the fly modify them to look like that:
"update my_table set Column2 = 'val for Column2', Column3 = 'some other values', Column4 = 'some other value' where Column1 = 'some given value' and Column2 = 'val for Column2'".
Can a trigger "before update" do it? For some reason we cannot at the moment ask the vendor to change the hard code of the application so we are looking for a temporary workaround.
View 3 Replies
View Related
Dec 12, 2011
How can i join two quires together to get result.
My requirement is:
First i want to select Table as we do
Select * from tab;
Then i want to describe the table as we do
Desc WO;
How can we join these two queries to have result.
View 21 Replies
View Related
Jun 4, 2013
I have two queries that I need to run and compare the outputs against each other. Each query runs on a different host. I can run each query on a different pane (Window - I am using Toad for running query). What I am trying to do is:
- Run both queries on a single pane
- Compare the output where if a "study" matches on both query output, then display the result.
To being with, is it possible to run the queries on a single pane by defining SID string as a part of query syntax......?
SELECT study,
TO_CHAR (completed_date, 'mm/dd/yyyy') completed_date, status
FROM ...
SELECT study, name
FROM .....
View 15 Replies
View Related
Sep 15, 2010
I have some troubles when I try to retrieve last executed queries in a database.
For example;
I run the script below:
select distinct t.first_load_time, t.sql_text, t.last_load_time, s.username
from v_$sql t, v$session s
where s.username='SYS'
And as a result, I retrieve the queries executed by SYS user. But the problem is that, if SYS user executed the same query more than once,
only the very first record is shown.
It is like this,
SYS user executes "select * from table_abc" at 10:54:35, and after that SYS executes the same query at 13:45:55. and after running
the query above, I can only see the record which was executed at 10:54:35. I need to see the both results.
View 39 Replies
View Related
Jun 5, 2012
SELECT b.KPCNO
,b.KPC_FULL_NAME
,min(c.time) in_time
FROM xxkpc_hr_personnel_v2 b
,xxkpc_fingerscan_data_v c
[code]........
View 5 Replies
View Related
Aug 27, 2010
how to run two different Queries In One Report.
View 7 Replies
View Related
Jan 15, 2013
How I can get the union result of 2 queries and put them in xml result, but I want each query to be in seperate xml element. I don t want to put 1 single xmlelement and do a From then construct a virtual table uniting the 2 subqueries
I mean I don t want something like the following:
(Select
XMLAGG(
XMLELEMENT("credit",
[Code]...
Except the 2nd alternative is not working I get error message: "SQL command not properly ended"
View 4 Replies
View Related
Jan 31, 2013
I am trying to validate a monthly report so was trying to write queries to get different criteria into one table. So my first query returns all the product,second query returns all the enrolled customers, 3rd query returns all the cancelled customers and 4th query returns all the newly enrolled for a month. Is there a way I can pass the first query results into 1st column, 2 query results into 2nd column, 3 query results into 3rd column and so on.
I tired writing the SQL several different ways and have spent a day on it and still cannot figure it out. I am using SQL Developer.
View 9 Replies
View Related
Jun 21, 2010
I have 4 select queries.
Query1
Query2
Query3
Query4
First Step:Combine Query1 and Query2,but the requirement is Query2 should only use the Acct_ID and Bill_ID which are output from Query1.
Second Step:Combine Query3 and Query4,but the requirement is Query4 should only use the Acct_ID and Bill_ID which are output from Query3.
Third Step: Is to now combine both the data set from First Step and Second Step.
In order to achieve my First and Second Steps I used WITH clause.
With S1 as ( Query1 ),
S2 as ( Query1 Union Query2)
Select S2.* from S1,S2
where S1.ACCT_ID=S2.ACCT_ID
AND S1.BILL_ID=S2.BILL_ID
With S3 as ( Query3 ),
S4 as ( Query3 Union Query4)
Select S2.* from S3,S4
where S3.ACCT_ID=S4.ACCT_ID
AND S3.BILL_ID=S4.BILL_ID
1. Is that approach right for achieving my First and Second step requirements ?
2. How to achieve Third Step ?
View 3 Replies
View Related
Jul 11, 2012
I am trying to trace the SQL statements executed against a particular database user. I don't have AUDITING enabled and I am using Oracle 11g.I have the following query :
SELECT
S.MODULE,
SQL_TEXT ,
S.EXECUTIONS
FROM
[code].....
But if multiple users running the 'APP.EXE' are connected to the same db user, I am not able to understand which OS user executed which query. So I tried to join with V$SESSION view to get the user details.
SELECT
S.MODULE,SQL_TEXT ,SN.OSUSER, SN.MACHINE, S.EXECUTIONS
FROM
SYS.V_$SQL S,
SYS.ALL_USERS U,
V$SESSION SN
WHERE
S.PARSING_USER_ID=U.USER_ID
AND UPPER(U.USERNAME) IN ('USERNAME')
AND (UPPER(S.MODULE)='APP.EXE')
AND S.SQL_ID=SN.SQL_ID
ORDER BY S.LAST_LOAD_TIME
But this doesn't seems to be working(In my case it didn't return any rows) I have also tried the following
select S.SQL_TEXT,S.MODULE,S.EXECUTIONS,SN.OSUSER,SN.MACHINE,SN.SID, U.username,U.user_id from
SYS.V_$SQL S, v$open_cursor oc,SYS.ALL_USERS U,V$SESSION SN
where S.PARSING_USER_ID=U.USER_ID
AND UPPER(U.USERNAME) IN ('USERNAME')
AND (UPPER(S.MODULE)='APP.EXE')
and oc.SQL_ID=s.SQL_ID AND SN.SID=OC.SID AND SN.SADDR=OC.SADDR;
but I am not sure whether this is giving the right results. So, I have the following questions
1) How do I get the queries executed by each session?
2) The EXECUTIONS column of V_$SQL seems to the executions from all the sessions. How do I know the number of times a particular query is executed by a session?
3) How long a record about a query will be stored in V_$SQL? When do Oracle delete it from the view?
View 5 Replies
View Related
Mar 19, 2013
Below are two queries , in merging two queries into a single so that out put coveres out put from below two queries
create table t_look as
select 1 a, 2 b, 3 c from dual union all
select 1 a, 20 b, 3 c from dual union all
select 1 a, 21 b, 3 c from dual union all
[Code]....
View 12 Replies
View Related
Sep 6, 2012
I've small doubt regarding the subqueries in delete statements. observe the below statements with their results.
SQL> alter table emp3 rename column deptno to deptid;
Table altered.
SQL> select deptid from dept;
select deptid from dept
*
ERROR at line 1:
ORA-00904: "DEPTID": invalid identifier
[code]...
but when you use same subquery in update or select stmt it throws 'invalid identifier' or similar error.Why same does not happen with delete stmt ?
View 6 Replies
View Related
Jul 31, 2012
I'd like to audit a table for any SELECT queries that are executed against it with no WHERE clause. I've read the documentation on DBMS_FGA carefully, and as close as I can tell, creating a policy with a NULL audit_condition causes all queries against the table to be audited, which isn't what I'm looking for.
What I'd like is something like this:
DBMS_FGA.ADD_POLICY (
object_schema => 'scott',
object_name => 'emp',
policy_name => 'mypolicy1',
audit_condition => 'WHERE CLAUSE IS ABSENT',
audit_column => 'comm,sal',
[code].......
SELECT * FROM EMP;but queries with conditions ('WHERE sal > 400', for instance) are not trapped.
I'm using 11gR2 (11.2.0.2) on OEL.
View 2 Replies
View Related
Oct 10, 2011
I wonder how I can limit the queries in a table? This limitation would be that from a certain time, it allows queries. Before the opening hours, permitting no select.
Example: Allow SELECTs in table only after 16 p.m.
View 1 Replies
View Related
Oct 21, 2012
I am trying to display the results from 2 queries, one is supposed to display the count of the employees, per department, who win over the average of the entire company and the other one is supposed to display the count of the employees, per department, who win under the average of the entire company.
I used a UNION ALL, but all it does is merge the results from the ones that win over and under the average into one row, is there a way to separate them? I tried assigning names to each salary using AS but it only displays the first I put in.
sql
Original
- sql Code
(
SELECT DE.DEPARTMENT_NAME, COUNT (EM.EMPLOYEE_ID) AS MAYORES
FROM DEPARTMENTS DE, EMPLOYEES EM
WHERE DE.DEPARTMENT_ID = EM.DEPARTMENT_ID
AND EM.SALARY > (SELECT AVG(EM.SALARY) FROM EMPLOYEES EM)
GROUP BY DE.DEPARTMENT_NAME
[code].....
View 3 Replies
View Related
Oct 26, 2010
Is information in v$sql enough to select all queries executed between given date and now? When the queries are removed from v$sql?
View 1 Replies
View Related
