I have 2 object tables. Location and a department. Department references a location Object. But this wont insert. I get "0 rows created".
CREATE OR REPLACE TYPE location_objtyp AS OBJECT
(
locationID NUMBER,
name VARCHAR2(48)
);
/
CREATE OR REPLACE TYPE dept_objtyp AS OBJECT
(
deptID NUMBER,
name VARCHAR2(48),
locationID_ref REF location_objtyp
);
[code]...
This does not insert. I get no error. Only - "0 rows created".
While practicing with Triggers, the following error was encountered. An Object Type and an object Table are created.
create or replace
type typPerson is object
(id number,
firstname varchar2(30),
lastname varchar2(30)
[code].........
I executed the below insert statement, and I got the following error.
SQL> insert into person_obj_tab values (10,'Object1','From Trigger');
insert into person_obj_tab values (10,'Object1','From Trigger')
*
ERROR at line 1:
ORA-03113: end-of-file on communication channel
Process ID: 4153
Session ID: 136 Serial number: 305
[code]......
SQL> insert into person_obj_tab values (10,'Object','Original');
1 row created.Question:
1) Trigger of version 1 did not report any error during compilation, but during DML execution, hangs for sometime and gives the above error.
2) Whether direct assignment of Objects of greater size is possible inside triggers built on object Tables?
3) Suppose an object contain multiple attributes (say more than 20), then how to assign them inside a trigger?
I had my previous table model as below.
CREATE TABLE Rel_Module (
Id NUMBER (6) PRIMARY KEY,
Type CHAR (7) NOT NULL,
[Code]...
How I can easily load data into this new REL_MODULE table either using SQL or PL/SQL (e.g., Procedures, Functions, and Triggers). I don't need to write so many INSERT statement.
I need to insert values fetched from an object type into an empty table.
-- >> table creation:
create table ASSET
(
ASSETID NUMBER(5),
ASSETTYPE VARCHAR2(20));
-- >> created an object_type
SQL> create or replace type obj1 as object(v_ASSETID NUMBER(20),
2 v_ASSETTYPE varchar2(20));
3 /
Type created
--- >> create the package
SQL> create or replace package test_arr is
2 type nest_tab is table of obj1;
3 procedure insert_data(t_nest IN nest_tab);
4 end test_arr;
5 /
Package created
SQL> create or replace package body test_arr is
2 procedure insert_data(t_nest IN nest_tab) is
3 begin
4 for i in t_nest.first..t_nest.last loop
5 insert into asset(ASSETID,
6 ASSETTYPE) values (t_nest(i).v_ASSETID,
[code]....
-- >> a block to execute the above package:
SQL> declare
2 type ref_tab is table of obj1;
3 ref_tab1 ref_tab;
4 begin
5 ref_tab1 := ref_tab(1,'a');
6 test_arr.insert_data(ref_tab1);
7 end;
8 /
But I am getting the below error when executing the package:
ORA-06550: line 5, column 13:
PLS-00306: wrong number or types of arguments in call to 'REF_TAB'
ORA-06550: line 5, column 13:
PLS-00306: wrong number or types of arguments in call to 'REF_TAB'
ORA-06550: line 5, column 1:
[code]....
I have a two different Databases. I created a db link in DB 1 to connect to DB 2 and it is working fine when I select data from any table. but I have one table in the DB2 which has a column with user defined data type . so when I try to select this column from DB 2 by using the DB link it gives me this error :ORA-22804 remote operations not permitted on object tables or user-defined type columns.
View 1 Replies View Relatedi have 100 records in table1,like as we have more 15 tables without data. the issue is how can i insert above table1 data(100 records) into different 15 tables in single sql command.
View 22 Replies View Relatedi have source table having 1000 records, i want insert first 100 rows in table1,second 200 rows in table2 and remaining row in table3.
View 12 Replies View RelatedI am trying to insert from 3 different files in 3 tables and I am finding that the same id is being inserted for each row.
DECLARE
F UTL_FILE.FILE_TYPE;
V_LINE VARCHAR2 (1000);
V_Name varchar2(512 char);
V_ParentUID raw(16);
V_Path varchar2(1024 char);
[code]...
I have a form which has three detail portions. I want that when I press SAVE, it should insert data in two tables & then run the specific code & then insert data in other two tables.
I am using Developer 6i. Couldn't find out the proper trigger or related thing.
I am trying to insert records in multiple tables. I know how to view data using joinig, but unable to understand how to insert records in multiple tables using Joining. I searched it on net, but didn't find much. I have also tried to write a code, but it is not working, I have seen some examples on different websites where people are using SELECT in INSERT statement for joining. What is the correct Syntax to INSERT record in Multiple tables.
Insert into library_users, library_users_info
(library_users.username, library_users.password, library_users_info.address, library_users_info.phone_no) VALUES (...)
We get data from our customers which we load into temporary tables.The goal is to consolidate this data into one single table.
Following are the rules:
1) final table should have all the columns from all the tables. If there are common column(s) then add only one column with that name.
2) the join would be based on all the common columns
3) if there is a common row, we merge the row into one (example, the row with DOMAIN = ACME.COM)
4) There could be 'N' number of tables
Following is the most realistic data.
1) T1/T2/T3 has the sample data which cover most of our test cases
2) We are expected to transform the data from T1/T2/T3 as depicted in table T4.
3) we might have more than 3 tables in our production environment, so the query should work for N tables.
4) I have given the explanation of how each row should be derived to be inserted in T4
5) the only information we have to work with is the TABLE_NAME(s) and its metadata from USER_TAB_COLUMNS
DROP TABLE T1;
DROP TABLE T2;
DROP TABLE T3;
DROP TABLE T4;
[code].....
Explanation for each row:
row1) This row comes from T1 and T2 (not T3 because HOSTNAME would not match)
row2) This row comes from T1 and T3 (not T2 because HOSTNAME would not match)
row3) This row comes from T1 and T3
row4) This row comes from T2 and T3
row5) This row comes from T3
I created a music database, and I'm having trouble inserting the audio, video, and lyrics (.doc) into their respective tables. I searched through the forums and found some example code, but I'm not sure how to modify it to fit my purposes.
What I need is a procedure that can insert a complete record into the track table (including an .mp3 file for each row), one that can insert a record into the lyrics table (including .doc file for each row), and a procedure that can insert a single record into the Video table (including an .mv4 file).
Here's the DDL:
CREATE TABLE Artist(
artist_id number(9),
artist_name varchar(30),
country char(2),
num_albums number(3),
num_songs number(5)
);
[Code]....
I have a problem with executing oracleCommand.ExecuteReader() method. Whatever I try it always returns null and it won't create OracleData reader object. I'm using ODAC 1120320_x64 for .net 4.0 and timesten112241.win64. Don't sure what to do. Debugger is showing strange thing in OracleConnection object : ConnectionState = Closed, but output of ttStatus shows connection to TimesTen data store and ExecuteNonQuery() command works just fine with or without (in or out) parameters. But when I try to execute some query with multile output such as select *, I can't get any result.
I also have a strange problem with connection.Open() When I execute Open() i throws AccessViolationException that can be handled with [Handle ProcessCorruptedStateExceptions] attribute, but connection is established after that and my application works fine until I try to instance OracleDataReader object.
Here is the code:
OracleCommand select = null;
OracleDataReader reader = null;
select = new OracleCommand(selectStmt, connection);
select.CommandType = CommandType.Text;
try
{
reader = select.ExecuteReader(); // this line throws NullReferenceException
if (reader.HasRows)
{
[code]....
Just to mention, I tried it with different queries (pl/sql, plane sql, stored procedure) and all of them works fine in SQL Developer, but not in app.
I am trying to insert data in three tables from three csv files simultaneously. This is what I have so far:
---insert all data from three csv files
DECLARE
--zenobject
F UTL_FILE.FILE_TYPE;
[Code]....
How can I search in Nested Tables ex: (pr_travel_date_range,pr_bo_arr) using the SQL below and insert the result into a new Nested Table: ex:g_splited_range_arr.
Here are the DDL and DML SQLs;*Don't worry about the NUMBER( 8 )*
CREATE OR REPLACE TYPE DATE_RANGE IS OBJECT ( start_date NUMBER( 8 ), end_date NUMBER( 8 ) );
CREATE OR REPLACE TYPE DATE_RANGE_ARR IS TABLE OF DATE_RANGE;
DECLARE
g_splited_range_arr DATE_RANGE_ARR := DATE_RANGE_ARR( );
[code]...
Or can I create a VIEW with parameters of Nested Tables in it so I can simply call
SELECT *
BULK COLLECT INTO g_splited_range_arr
FROM view_split_date(g_travel_range,g_bo_arr);
how to transfer a large amount of data from remote table by db link into the local table.
I try to do that by plsq below but I got error:
PLS-00739: FORALL INSERT/UPDATE/DELETE not supported on remote tables
DECLARE
type t_varchar is table of varchar2(100);
l_data t_varchar ;
CURSOR r IS
SELECT id
FROM TMP_MAPE_WEB_ID;
BEGIN
[code]....
I want to select data from different tables and insert this into one table based on some conditions:
SELECT *
FROM welltest_msr
WHERE well_s = 3419740
AND check_ind = 1
[Code]....
So I tried doing this with selecting the data and looping through it to do the insert.
DECLARE
--
-- WELLS
--
CURSOR c_well
[code].....
How to get all the name of tables that a user can select, insert, update or delete?
View 2 Replies View RelatedI'm writing a Procedure which Updates or Inserts data in Multiple tables. Selected fields of 10 tables need to be updated or Inserted. For this I created a table which comprises of fields related to all 10 tables. Then I write Procedure. Under this I create a Cursor which uploads the data from the newly created table which contains different fields of 10 tables. Then I write Update and Insert statements one by one for all 10 tables.
Sample Procedure below.
-------------------------------------------
Create or replace procedure p_proc as
spidm spriden.spriden_pidm%type;
cursor mycur is select * from mytable;
begin
for rec in mycur
[code]......
----------
Note: I created table on my server because data is coming from different server. They will upload the data in the table from there I pick and update the tables. Is updating or Inserting data in different tables one by one is correct?
I am trying to insert rows in two tables using sql loader.
I have two tables in database as
SQL> desc name
Name Null? Type
---------------------- -------- ------------
ID NUMBER
NAME VARCHAR2(20)
BD DATE
SQL> desc name3
Name Null? Type
--------------------- ----------- -------------
ID NUMBER
NAME VARCHAR2(20)
BD DATE
I created controlfiles as
[oracle@DBTEST sqldri]$ cat datafile.ctl
options (direct=true)
load data
INFILE *
into table name truncate
when id='1'
[code]....
when i run sql loader as
[oracle@DBTEST sqldri]$ sqlldr hr/hr control=/u01/sqldri/datafile.ctl
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Aug 7 23:30:07 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Load completed - logical record count 2.
no rows is inserted..the log file contain entries as
[oracle@DBTEST sqldri]$ cat datafile.log
SQL*Loader: Release 10.2.0.1.0 - Production on Tue Aug 7 23:30:07 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Control File: /u01/sqldri/datafile.ctl
Data File: /u01/sqldri/datafile.ctl
Bad File: /u01/sqldri/datafile.bad
[code]....
I want to insert multiple record in diff. table by using single query...
how can i di it suppose i hv 3 table table1, table2, table3 i want to insert 2 record on each table respectively..
But i want to do this task by using single query....how can i do it?
Is there any query to find the dependent object details for any object. Like if mview is built on a table, then i should be able to find the table name with out checking code of the mview. similar way for view and functions or procedures etc...
View 5 Replies View RelatedI have an Type-object typeObj1 that consists another Type-object typeObj2. this def has another Type-object typeObj3. how to access variable declared inside typeObj3. I have syntax below for each Type.
CREATE OR REPLACE TYPE typeObj1
AS OBJECT
(
SYSTEM_IDENTIFER VARCHAR2(50),
PROCESS_TYPE VARCHAR2(50),
abc typeObj2
)
/
[Code]...
/I have tried to access the type-object in where clause in following way
FROM TABLE(CAST(I_typeObj1 AS typeObj1)) ITTPRC,
......
Where
.......
AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM IN (SELECT ADDTN_INFO_KEY_TYP_NM FROM TABLE(ITTPRC.abc)))
AND (ADTINF.ADDTN_RQST_TYP_VAL_DT IN (SELECT ADDTN_RQST_VAL_DT FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM IN (SELECT ADDTN_RQST_VAL_NUM FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
AND (ADTINF.ADDTN_RQST_TYP_VALUE IN (SELECT ADDTN_RQST_VALUE FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
In this way i am able to access the variable inside typeObj3. But problem is i am getting error "ORA-01427 single-row subquery returns more than one row" when i pass more that one typeObj2.
I passed the values like this in proc execution.
T_T_A_I_V := typeObj3('asdasd',NULL,NULL),
typeObj3('String654',NULL,NULL),
typeObj3('abcdef',NULL,NULL));
T_T_A_I_I := typeObj2('CampusCode',T_T_A_I_V),
typeObj2('PlanNumber',T_T_A_I_V);
What i have done is removed typeObj3 from typeObj2, variables defined in typeObj3 are added in typeObj2 then i got ride of above error. is it correct
I created a data warehouse in oracle 10g n with three Dimension and one cube after that it crates 4 tables . How to use an insert sql statement to insert data in those tables n how to access them.
View 7 Replies View Relatedhow to insert data in oracle table without writing insert statement in oracle 9i or above. i am not going to write insert all, merge, sqlloder and import data.
View 2 Replies View RelatedI wish to make this simple statement with Toad GUI
INSERT INTO EXCLUDE_xxx
VALUES ('xxx',
'xxx',
'xxx',
'xxx',
SYSDATE);
Insert record is greyed out. How to insert new rows with Toad (click click)?
when i tried to insert the details from oracle froms..the data inserts twice to the DB..
my table structure:
create table app_sri
(a_id integer primary key,
p_first_name varchar2(30),
p_last_name varchar2(20),
p_age number(3)
);
here a_id can be genarated through simple sequence(pid_seq)...
trigger on app_sri
create or replace trigger pid_trg
[Code]....
form insertion code..
Begin
insert into app_sri(null,'robo','Big',100);
commit
End;
the data inserted...but twice
what is the reason behind the double insertion?
INSERT INTO LKP_ASSET_LOCATION (LOCATION) VALUES ('AMERICA'S CUP VILLAGE')
View 2 Replies View Relatedproblem on oracle 11gR2 where i have to import data from a source database to an existing table without truncate or drop the target table in the target database.
we have found something called table_exist_action=append in impdp.
I have to cleanup data from our tables (Production Environment) that contain millions of rows. The question is apart from the solution of the partitioned tables what alternative recommended solution suggests Oracle?
To delete these tables by using a cursor PL/SQL block or to import all the database and in the tables that we want to remove the old rows to use the QUERY option of the data pump utility.
I have used both ways and i have to admit that datapump solution is much much faster than the deletion that suffers from I/O disk.The question again is which method from these two is more reliable and less risky for the health of the database.
