I have a tablespace of size 512 GB. On the basis of tables and indexes created on it, the space consumed should be 319GB but when I am retrieving the free space size , I am getting only 124GB of free space. That means around 70GB of space is missing.
View 1 RepliesJust now sysaux resized to 600m from 250m >>
Sysaux Tablespace is running low. WE SET AWR RETENTION TIME=60 DAYS. WE ARE NOT INTEREST TO EXTEND SYSAUX TABLESPACE SIZE.
Usually we take AWR weekly once. Some times we did ADDM report and ASH.
CODEsql>select TABLESPACE_NAME, FILE_NAME, BYTES/(1024*1024), AUTOEXTENSIBLE, MAXBYTES/(1024*1024) from dba_data_files where tablespace_name = 'SYSAUX';
TABLESPACE_NAME FILE_NAME BYTES/(1024*1024) AUT MAXBYTES/(1024*1024)
SYSAUX /u01/app/oracle/oradata/test/sysaux01.dbf 600 YES 32767.9844
CODEsql> @SCRIPT.SQ
TABLESPACE TOTAL_SPACE(MB) USED_SPACE(MB) FREE_SPACE(MB) % Used % Free
SYSAUX 600 248 352 41.33 58.67
1. What's the best SOLUTION ?
2. Can i shrink sysaux tablespace ?
3. I think , The size for all occupants in sysaux tablespace is less than 200 MB => how to find actual content of sysaux tablespace ?
4. What could be the reason for growth? Is there any way to free the space from sysaux table space?
I want to replace double space with single space and also remove junk characters from the data. How can I do that?
CREATE TABLE test07013
(
NAME VARCHAR2(50)
);
INSERT INTO VALUES ('WARREN,'); -- REMOVE ","
INSERT INTO VALUES ('CLARK H'); -- REPLACE "DOUBLE SPACE" WITH "SINGLE SPACE"
INSERT INTO VALUES ('BRYAN A.'); -- REMOVE "."
INSERT INTO VALUES ('CARTER JR. ROBERT'); -- REMOVE "."," AND REPLACE "DOUBLE SPACE" WITH "SINGLE SPACE"
I am trying to Shrink Table space using the following SQl. As we are dropping large datasets. Later i am trying to shrink the table space
Alter Tablespace table_name Shrink Space Keep 20M;
Is this the best way to do in oracle 11G
I got the error ORA-01653: unable to extend table <OWNER.TABLE_NAME> by <BYTE> in tablespace <TABLESPACE> in my production database. But I could see 4GB of free space available in the tablespace. But this was resolved after increasing the Tablespace size by 1 more GB. So I wanted to know how I can I reclaim the 4GB space ?
While searching in internet I got few tips like there will be a fragmentation in the tablespace, the free space available in the tablespace may not be a continuous block. To avoid this we need to reorganize the tables using ALTER TABLE <TABLE_NAME> MOVE <TABLESPACE>; command.
But in my tablespace there are huge number of tables exists I cannot do reorganization of all the tables. So I need to know how to identify particularly what are the tables has more fragmentation? so that I can go for reorganizing those tables only.
My Database version in 9.2.0.7
Tablespaces are Locally Managed
We are using a GTT table to store the summarize data and display it on same screen(10g 10.2.0.5). Now we are facing temporary tablespace space issue very frequently as our client do not enable the auto extend on for temp table space. We have analyzed the AWR and came to know that there are 900000 inserts per hour on an average. Client DBA Claims that there are sessions(1or 2) which inserts the data in temporary table continuously for 2-3 days.
According to him one session is running from 28th Aug and problem comes on 2nd Sep and after killing the problematic session the application will work fine. Generally this problems come on weekend. I have discussed with our dev team and as per them there is no session leakage issue.
following is the insert statement:
INSERT INTO DT_CA_STNDALN_DETAILS_TMP (ORG_ID,BA_PRODTYPE_ID,MAX
TENOR,GROSSLIMIT,GROSS_UTILISATION,HAS_MDR,HAS_CLUSTER,SIGN_IN
D,GROSS_AVAILABILITY,COLLATERAL,NET_UTILISATION,DT_CA_STNDALN_DE
TAILS_TMP_VER,DM_LSTUPDDT,NET_AVAILABILITY) VALUES (:1,:2,:3,:4,
:5,:6,:7,:8,:9,:10,:11,:12,sysdate,:13) ;
I need insert white space into table which a VARCHAR2 column. I would like to validate the below expression against the data in the column S.*
I guess this pattern validates for non-whitespace characters. explain what this pattern does?
I want to alter a very large table.
ALTER TABLE MYTABLE ADD
(
ENTRY_TSTMP DATE DEFAULT SYSDATE NOT NULL
)
My table is very large and I am getting an error saying I am out of undo space.
The dba says the undo space is as big as the table.
I need to check the exact amount of space used (in bytes or MB) by a table which is having a BLOB column.I tried the following query but it is not giving the proper usage.
select segment_name , sum(bytes)from dba_extentswhere segment_type='TABLE'and segment_name in ('TEST_CLOB','TEST_BLOB','TEST_CLOB_ADV','TEST_BLOB_ADV') group by segment_name; I even tried the following stored procedure create or replace procedure sp_get_table_size (p_table_name varchar2)as l_segment_name varchar2(30); l_segment_size_blocks number; l_segment_size_bytes number; l_used_blocks number; l_used_bytes number; l_expired_blocks number; l_expired_bytes number; l_unexpired_blocks number; l_unexpired_bytes number; begin select
[code].......
But it is giving the error
Error starting at line 298 in command:exec sp_get_table_size ('TEST_CLOB_ADV')Error report:ORA-03213: Invalid Lob Segment Name for DBMS_SPACE packageORA-06512: at "SYS.DBMS_SPACE", line 210ORA-06512: at "SYS.SP_GET_TABLE_SIZE", line 20ORA-06512: at line 103213. 00000 - "Invalid Lob Segment Name for DBMS_SPACE package"*Cause: The Lob Segment specified in the DBMS_SPACE operation does not exist.
*Action: Fix the Segment Specification Although the LOB section is specified in create table syntax.
a newbie dba here..
select TABLESPACE_NAME,
sum(BYTES) Total_free_space,
max(BYTES) largest_free_extent
from dba_free_space
group by TABLESPACE_NAME
/
result output is attached .txt file.
the SYSTEM & USERS table space shows only <10 mb free space. Is it a bad sign? What I should do ?
alter index test_idx1 shrink space;
I've heard that this statement causes a table lock but cant find any information on this.if it is so, is it a write lock or also a read lock of the table?
I am using Oracle 10.2.0.3. Since yesterday i am seeing a session with sid 1160 using undo tablespace but not able to find how much it is using .I need to know which session and from which module and how much is the Undo being used by those sessions. I have tried searching but all the queries provide me with some different results each time.
Also i need the same information for REDO being generated .
I want to create system table space's extent management dictionary with the syntax:
CODEcreate database
logfile
group 1 ('/u01/app/oradata/anand/redo1a.log') size 100M,
group 2 ('/u01/app/oradata/anand/redo2a.log') size 100M,
group 3 ('/u01/app/oradata/anand/redo3a.log') size 100M
datafile '/u01/app/oradata/anand/system.dbf' size 400M extent management dictionary
sysaux datafile '/u01/app/oradata/anand/sysaux.dbf' size 300M
default temporary tablespace temp tempfile '/u01/app/oradata/anand/temp.dbf' size 50M
but it is giving error
ERROR at line 6:
ORA-25141: invalid EXTENT MANAGEMENT clause
how can I make system tablespace's extent management dictionary?
while trying to refresh an materialized view.. oracle throws cannot extend temp table space error.. while starting to refresh mivew temp table space is empty but once refresh started temp tablespace is growing and throws cannot extend temp tablespace error,,,size of temp tablesapce is 200GB..when i monter the session it does an sort event of an table(ammt_pol_ag_comm).. only 4% of this sort event is completing after that it throws error bu occupying the entire 200 GB tabespace.. MView script below..
CREATE materialized VIEW ammv_agent_pol_persis_emas
NoLogging
Parallel 10
Build Immediate
Refresh on demand
With Primary Key
AS
[code]...
I have table which has 240 columns.
Here is the list of column data type.
VARCHAR2(50)
TIMESTAMP(6)
VARCHAR2(25)
VARCHAR2(25)
NUMBER(15,2)
VARCHAR2(50)
NUMBER(1)
[code]....
The table has 64 partition.. When i count the table(select count(*) from table), i see close to 22 million records.
SQL> select (num_rows*avg_row_len)/1024/1024/1024 GB,num_rows,avg_row_len
2 from dba_tables
3 where table_name='TRX_TAB';
GB NUM_ROWS AVG_ROW_LEN
---------- ---------- -----------
74.9393936 21871585 3679
SQL>
It is supposed to take 75 GB. But this table is consuming 135 GB now. It is occupying 8 GB per day.
How to check for the increment of a space of the tablespace based on the particular table. (i.e.) Say a scenario, if am trying to load the data for a particular table, for first I loaded some 10000 records and then again loading 50000 records ,so based on the icrement of the reocrds the tablespace size also increases gradually . so for this scenario how to monitor the increment of the space.
View 13 Replies View RelatedIt is not possible to run SHRINK SPACE against a table with a function based index. This is documented, and I've tested on the current release. I've reverse engineered it a bit, and the issue is in fact that you cannot SHRINK SPACE if there is an index on a virtual column:SQL> SQL> create table t1(c1 number, c2 as (c1*2)) segment creation immediate;
Table created.
SQL> alter table t1 enable row movement;
Table altered.
SQL> alter table t1 shrink space;
Table altered.
SQL> create index i1 on t1(c2);
Index created.
SQL> alter table t1 shrink space;
alter table t1 shrink space
ERROR at line 1: ORA-10631: SHRINK clause should not be specified for this object.
Can we find out no of undo segments in undo Table space ? If so , how to find? what's their max limit ?
View 9 Replies View Relatedquery string in such like that index.php?name=tejaspatel
i have table in record is available below
select * from emp where name = :name // it is query string parameter
emp
name
tejas patel
then how to match this record ?
I have table like below.
Name Gender
----- ------
f1 Female
f2 Female
m1 Male
m2 Male
f3 Female
m3 Male
m4 Male
but I need the output like below
Male Female
----- ------
m1 f1
m2 f2
m3 f3
m4
I have tried to get the above O/p but getting along with null values.
SQL> ed
Wrote file afiedt.buf
1 select case when gender='male' then name end male,
2 case when gender='female' then name end female
3* from details s1
4 /
MALE FEMALE
--------------- ---------------
f1
f2
m1
m2
f3
m3
m4
7 rows selected.
how the get the above o/p with out null values.
i have data about 3 gb but my files in e:oraclexeapporacleoradataXE has grown to 16 gb
1)my e: drive has less space ,pls tel how can i fee some space and give it back to OS
2)is there any other place where i can free up some space from oracle and give it back to OS.
-----------------------
windows (2008)
---
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
"CORE 11.2.0.2.0 Production"
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production (2008)
NLSRTL Version 11.2.0.2.0 - Production
[code]....
i have a column called name in a table. now what iwould like to do is to check if it has two parts "paulh some" and then output the second part!
SELECT LTRIM(name,' '), length(name) length
FROM list
WHERE INSTR(name,' ') = 1;
but that doesnt work.. the fucntion is NOT checking for the space! if i use another character (a or b etc) it works..
explain the difference in numbers between the queries? I am acutally more concerned about the ETM_XML clob since the descrepancy appears to be bigger.
SELECT table_name, column_name, segment_name, a.bytes FROM dba_segments a JOIN dba_lobs b USING (owner, segment_name) WHERE b.table_name = 'ETM_RAW_XML';
ETM_RAW_XML
IFD_XML
SYS_LOB0007260522C00012$$ 87870668800
ETM_RAW_XML
ETM_XML
SYS_LOB0007260522C00011$$ 125199974400
SQL> SELECT NVL((SUM(DBMS_LOB.GETLENGTH(IFD_XML))),0) AS BYTES FROM ETM_RAW_XML;
BYTES
----------------
83848300852 ~ 78.0898154266179 GB
SELECT NVL((SUM(DBMS_LOB.GETLENGTH(IFD_XML))),0) AS BYTES FROM ETM_RAW_XML;
BYTES
----------------
61907953222 ~ 57.6562743838876 GB
How to add space between columns in the dbms output statement.I tried to do so in the following way which i attached.
View 8 Replies View RelatedHow can we find how much space is used by the materialized view.
View 1 Replies View RelatedWe are using oracle 10.2.0.3.0 version on HP-UX B.11.23 U ia64.
We are facing a lot of delay in TNS ping reply. It is taking 8000+ msec.
$ tnsping XXXXXX 20
TNS Ping Utility for HPUX: Version 10.2.0.3.0 - Production on 27-FEB-2013 12:37:15
Copyright (c) 1997, 2006, Oracle. All rights reserved.
Used parameter files:
$ORACLE_HOME/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxx)(PORT = 1531))) (CONNECT_DATA = (SERVICE_NAME = xxxxxxx)))
OK (1250 msec)
OK (1150 msec)
OK (860 msec)
OK (860 msec)
OK (790 msec)
OK (810 msec)
OK (790 msec)
OK (570 msec)
OK (650 msec)
OK (630 msec)
OK (790 msec)
OK (1240 msec)
OK (1090 msec)
OK (1030 msec)
OK (870 msec)
OK (690 msec)
OK (740 msec)
OK (650 msec)
OK (490 msec)
OK (560 msec)
$
i'm trying to read a text file into an oracel table. I'm having issues with this statement FIELDS TERMINATED BY ' ' fields are separated by 2 spaces. How ever Oracle is not recognizing ' ' or " " as double space. It is treating as one space thus shifting all coulmns.
How can I represent double space to Oracle ?
how to check the maximum space ever used for TEMP. I want to know it because I need to resize the TEMP and I want to know how small it can be. As I can see from a documentation hURL....max_size is max number of extens ever used in a segment
I could multiply max_size by extent_size and it would give me the max size of temp ever used
SQL> select segment_file, extent_size, max_size from v$sort_segment;
SEGMENT_FILE EXTENT_SIZE MAX_SIZE
0 128 23625
0 128 753
huge deletion happened from app side. How to check fragmented space ?
View 8 Replies View RelatedI need to monitor the Database daily, so i need to check whether the size of the DB is increasing @ a slow rate or rather than that. I need to do it in RAC & NON-RAC.
View 3 Replies View Related