The DB was created but when i log in again, it is looking for the pfile in the another DB's location rather than from "%ORACLE_HOME%DATABASE". Where i missed out to create new oracle_home folder?
i am creating database manually in oracle 9i os version ibm-aix5.3 it showing following error
CREATE DATABASE "varathu" * ERROR at line 1: ORA-01501: CREATE DATABASE failed ORA-00200: controlfile could not be created ORA-00202: controlfile: '/backup/varathu/control01.ctl' ORA-27040: skgfrcre: create error, unable to create file IBM AIX RISC System/6000 Error: 13: Permission denied
I created manually a database in 10g, after succesfully creating the dB, I created a single user re: LAMS. Now, I noticed that my USERS tablespace is currently at a 99.96% usage:
SQL> @check_space_used.sql Monday, March 14, 2011 2:46:22 PM SGT
We have a 2 node RAC installation on IBM AIX 5.3 with Oracle Standard Edition. We need to create a manual standby database (becoz Standard Edition does not allow Dataguard confign). Can we do this on a different platform (eg: Linux/Windows). This is to make use of existing servers for the standby environment.
It's been 2 days from now that I'm bugging with this kind of error in my manual dB creation. I used DBCA first but we had a default directory settings, that's why I resorted to create the db manually. The dB was already created and currently has a status of STARTED.. I cannot mount it due to this error:
SQL> startup nomount ORACLE instance started. Total System Global Area 247463936 bytes Fixed Size 2235856 bytes Variable Size 177840688 bytes
Problem Description: There are five range partitioned tables which are partitioned by date,designed by previous DBA.Four tables are in one tablespace and one more table is in another tablespace.For every three months there are two tablespaces are created autamatically in new names for future dates.There is no scheduled job for this.How they are created?.This is our question.
I'm getting a "TNS disconnect" after database creation script creation in DBCA. Haven't figured out what's going on. I'm attempting to create a 2nd database on one linux 64 server. I get all the way through DBCA, but it won't go the final mile. Any thoughts? I've tried setting the port to a different port from the existing LISTENER, creating a LISTENER2 and associating it with the 2nd instance.
During ASM Disk Groups creation after the ASM instance creation, receive the following error: Disk Group ORAASMGROUP2 already exists. Cannot be created again
The Grid infrastructure was deinstall one time and still the same issue.
from Control file, data is getting popupalated in TEST_USER and TEST_TITLE similarly if remove
INTO TABLE TEST_TITLE( TX_SID POSITION(1:3) CHAR, ID_TITLE "get_title_id(:TITLE_NAME)" ,
[code]...
from Control file, TEST_USER and TEST_ROLE is getting populated.
Here RD_ROLE_MASTER script
CREATE TABLE RD_ROLE_MASTER ( "ID_ROLE" NUMBER(38,0) NOT NULL ENABLE, "TX_ROLE_NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE
[code]...
Here is RD_TITLE_MASTER script CREATE TABLE RD_TITLE_MASTER( "ID_TITLE" NUMBER(38,0) NOT NULL ENABLE, "TX_TITLE_NAME" VARCHAR2(25 BYTE) NOT NULL ENABLE);
Insert into RD_TITLE_MASTER (ID_TITLE,TX_TITLE_NAME) values (7,'RED_LOB_ESCALATION_L1'); what is the problem?
I would like to know if 'user creation definition' is exported in user mode export if export is done with DBA role..If it is Not, does it mean we always need to precreate the user before we import the dump created using 'user mode export'?
when i run a form no information shows up until i click execute query... i need the info to be their automatically to browse with the previous and next button
Phyical memory : 420G My database version : 11.2.0.3 running on linux machine.
Memory_target = 200G . I would like to allocate this value to following SGA components. I don't want to automatic memory management enabled. how to split 200G for following components. Is there any percentage for each components ?
I am running some small tests here in my test env, using dataguard. I have configured the Primary and Standby with Maximum Availability... they're running just fine. Now i want to execute a failover test (i have already ran a Switchover test with the Broker successfully).
My question is very simple, at my point of view: What are the required steps to execute a successful manual failover? For example, i have my env as follows:
- Primary: prim1 - Standby: stdb1
Suppose that the primary database crashes in an unrecoverable way... is this case a manual failover would be necessary.
To do so, i would have to execute the following command, in my Standby database:
-- stdb1 is the standby database... DGMGRL> failover to stdb1
The above command is correct? Are there any required configurations after the failover? I read the Oracle Docs, and it says
Those SQL reports are built with apex_items. Afterwards I'm updating them with a manual process (apex_application.g_fxx for ..loop). I'm using different IDs on both reports for the apex_items.
It's working fine for the first report displayed. But not for the second one. If I swap the two reports, it's always the first that will be updated.
Does it mean that we cannot use the apex_application to update more than one report and that I have to use a page per report?
if it is possible to create a failover setup without RAC and DG...For example:
I have 11.2.0.2 database (with EBS 12.1.3) on dbnode1...I would like to create another node to failover my primary datbas in case of any failure.
Steps i will follow: 1: creat dbnode2 2: install same os as dbnode1 3: install same oracle as dbnode1 4: share dbnode2 database between dbnode1 and dbnode2
Now, if hardware fails on dbnode1, can i manually failover and start my database on dbnode2?
I know we can do with RAC and DG,BUT without RAC and DG If not possible..
I have some table spaces manual and others automatic, i just want to know what's the recommended one, to change it to the best way.
How to change Segment Space Management of a tablespace from MANUAL to AUTO? in oracle 10g R2 and also want to know the main difference between Manaul and Automatic Segment Space Management.
I am running a report which is called for a set of employees picked up in the cursor. For each employee the report is run in a different window. However, the report runs fine and the output gets saved in the local machine but the window doesn't get closed automatically.
How to close the reports window automatically without manual intervention?
we want to truncate a oracle Table in the Oracle DB. After the truncate the fact table will be loaded again. After the new load in the fact table we want to tell the times ten db to refresh the cache table. The cache Table is a user owned read-only cache group with no autorefresh. We want to tell times ten in a PL/SQL Block from Oracle DB that starts the refresh from the cache group in times ten. The refresh should not be a autorefresh because the refresh should only start if the fact table will new loaded after the truncate.
RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03009: failure of sql command on default channel at 01/26/2013 22:48:56 RMAN-11003: failure during parse/execution of SQL statement: alter system archive log current ORA-00258: manual archiving in NOARCHIVELOG mode must identify log RMAN>
I'm trying to get a unique sequential element id for every field in a manual tabular form. Here is the code to generate the form:
SELECT apex_item.hidden(1, lpad(rownum,4,0)) row_num, apex_item.hidden(2, skillset_demand_id) sdi, apex_item.text(3, domain, 20, 20, null, 'f03_#row_num#') Domain, apex_item.text(4, target, 20, 20) Specialization, apex_item.text(5, skill, 20, 20) Skill FROM RI_SKILLSET_DEMAND WHERE WORK_ID = :P511_WORK_IDAccording to the APEX API manual I should be able to set the attribute id with p_item_id*, which in the example of a text item, is the sixth parameter. In line 3 of the code above, I set the p_item_id to 'f03_#row_num#' after having created row_num in line 1.
The HTML I get is: <input id="f03_#row_num#" type="text" value="xxxxxxxxx" maxlength="20" size="20" name="f03"> ... <input id="f03_#row_num#" type="text" value="xxxxxxxxx" maxlength="20" size="20" name="f03">What I want is: <input id="f03_0001" type="text" value="xxxxxxxxx" maxlength="20" size="20" name="f03"> ... <input id="f03_0002" type="text" value="xxxxxxxxx" maxlength="20" size="20" name="f03"> ... etc.
I've tried a lot of things but I can't seem to get parameter substitution inserted into the id attribute so I can get each element uniquely with javascript later.
I need tablespace name,tablespace total size and used size of every tablespace for my 106 databases. bcz I am planning to prepare tablespace growth report for my 106 dbs. If I have the 2 months data from now in xl sheet, then I can predict the growth rate of every tablespace accurate almost.
it is not a easy task to fill the space detail manually in xl sheet everyday.Hence I need some mechanism to do this activity automatically.
I know we can collect this detail in a csv file every day while running the script. but is there any mechanism to store these detail in a particular xl sheet one by one column automatically?