How to enable firewall for Oracle Database..? Is it db specific..? or If I implement the firewall It will be applicable to all the databases in the server which are using same oracle home..?
View 7 Replies
we are planning to implement Oracle Audit Vault and Database Firewall on 2 node 11g RAC/solaris10
View 4 Replies View RelatedI have a job that runs the following commands for each table in a schema.. (I just inherited it ugggg)
alter table ODS.ODS_MONTHLY_MF_AUM enable row movement;
alter table ODS.ODS_MONTHLY_MF_AUM shrink space;
alter table ODS.ODS_MONTHLY_MF_AUM disable row movement;
On occassion I get this error when enabling row movement
ERROR at line 1:
ORA-00054: resource busy and acquire with NOWAIT specified
Other than dealing with apps that depend on ROWID's is there any negative impact to always keeping row movement enabled for tables.
Secondly, does any body have a script that can determine if the space really needs to be shrunk for a table.
for defragment of a table,
after enable it:
alter table test enable row movement;
do i need to:
alter table test disable row movement; ??
we have a database available in UNIX machine A which can be connected from client in UNIX machine B through port 1521.
If we give ping command from UNIX machine A to B or B to A, 0% packet loss, means connection established properly through firewall in port 1521.
Now we are setup one more UNIX machine C and installed a client here. This machine is available in different group, means if i give ping command from machine C to A, 100% packet loss. But from machine A to C, connection established with 0% packet loss.Because of this, when we tried to connect to a database from client in Machine C to database in Machine A, we got "time out" error.
My query is:
1. Is this because of not opening of port 1521 through firewall?
2. If so, is it enough to open port 1521 through firewall when we connect from machine C to A?
3. Any additional setup is required in firewall apart from opening of ports?
Environment:
Oracle 11.2.0.3
UNIX AIX 5.3/6.1
I have two machines with oracle 11g . Both having ODP 11.2 Beta. I've to communicate between these two machines using Oracle Advanced queuing. The message sent from one machine will reach the second machine only if the Firewall of both machine is OFF.But based on requirement, we cannot switch OFF firewall or add exceptions as ports or applications.
View 1 Replies View Relatedi am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
I am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'
I recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies View RelatedI am connected as System. It was the only user I set-up a password when installed the database on personal computer.
SQL> alter user sys identified by mypass007
2 /
User altered.
SQL> connect sys/mypass007
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
[code]...
SQL> conn sysoper/mypass007
ERROR:
ORA-01017: invalid username/password; logon denied
I have some requirement wherein I need to install Oracle 9i database server (9.2.0.7). I am not getting it on Oracle website. where can I get the download.
View 1 Replies View Relatedi do know how change the database but can any one assist me how to chnage SID of database which in windows 2003 server?
View 1 Replies View RelatedHow to create own database in oracle 10g. I want to create new database in oracle.
View 10 Replies View Relatedhow can we find the size of the oracle database 11g.
View 2 Replies View Relatedhow to create a new database in oracle??
View 2 Replies View RelatedI need to upgrade an oracle 8i database on HP-Unix server to Oracle 11g on Linux server, whether to upgrade it first to 10g linux and then to 11g ?
View 4 Replies View RelatedI have installed oracle 10g software and created Database on RHEL 4. when i run the run.sql its successively done but im not getting tables. whats the prob.
View 17 Replies View Relatedinstalled and configured oracle 12.1.0.1.0 on linux and i noticed there is no emctl? I went through the oracle docs and i see no references as what to use,
View 12 Replies View RelatedI am trying to upgrade the oracle 9.2.0.8 database in oracle 11.2.0.2. I have installed the new oracle home for 11g and after running the pre-upgrade script and setting the all environment variable like oracle base, oracle home, oracle sid and ora_nls
i am running the dbua but after click on finish button it's do the processing of 2% but after that i get
-------------------------------------------------
ORA-12709 error while loading create
database character set
--------------------------------------------------
I have oracle 10g running on oracle ASM 11.1, I want to know that if i install oracle 11gr2 database , can i use oracle 11.1 ASM which is already installed ?
View 5 Replies View RelatedI have three oracle 10g databases (db1, db2, db3)on a linux box.
A command at the OS level to find total cpu used by each of the above databases.
I installed Oracle 11g and created a test database in that the default count should be 4196... but it is 4143.. some packages are missing.. even when i'm creating materialized view it is showing some error that packages are missing. what can i do for that? Is my oracle s/w corrupted ? even when i downloaded from oracle site it also shows the same count.
View 1 Replies View RelatedI'm getting the error messaage:
Database Connection failure. Reason: java.sql.SQLException: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist SVR4 Error: 2: No such file or directory
I'm not an Oracle expert, but I have research a little and seems that the SID could be wrong or that the DB is down, in fact I have already checked trhe server but everything seems normal to me.
Yesterday i installed oracle 11g r2 by default i installed database Oracle with the installation .but today i tried to create the database with the name green tat also completed successfully..the problem is in startup
export oracle_sid=green
sqlplus '/ as sysdba'
startup
database mounted
select instance_name from v$instance; But it SHowing the instance name as Oracle...i tried with the other method also
export oracle_sid=green
sqlplus /nolog
conn sys/b123 as sysdba
database mounted
select instance_name from V$parameter;
and it shows instance name as green..i tried to see the datafile location for green database
select file_name from dba_data_files; it shows the orcl datafile locations.
When I try to log into my db with a specific user I get this message. Below is from the alert log. I can login as system just fine.
----- Error Stack Dump -----
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
Oracle 10g OEL 5.5
I am looking to migrate and upgrade an Oracle 9i database to 10g.
Would there be any fallout if the characterset were changed from US7ASCII to UTF8?
Actually in our environment , sysadmins are upgrading java versions on Unix (HP & Solaris) Machines and they have asked the query whether oracle database uses Java or not?
If it uses then all the databases need to be shut down for their planned activities and if not no need to shutdown the databases.
While after connecting to server via my userid( its an externally id) ,after setting ORACLE_HOME and SID, while entering sqlplus / command,its not connecting.Error am getting is:-
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
HP-UX Error: 22: Invalid argument
Attaching output session.
11:53:51 SQL>select * from v$version
11:53:55 2 /
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
All, I have an infuriating problem and I'm hoping for some advice. Well actually it is a number of problems but I'll use one example as a microcosm.I'm going to use as the example:
------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | | | | 912K(100)| |
| 1 | HASH JOIN | | 3412K| 940M| 826M| 912K (1)| 03:02:28 |
| 2 | HASH JOIN | | 3412K| 787M| 699M| 748K (1)| 02:29:39 |
| 3 | HASH JOIN | | 3610K| 657M| 557M| 560K (1)| 01:52:07 |
[code]...
Now then, this query runs perfectly and as expected (direct reads/DB scattered reads) until it hit step 13 in the plan (FTS of T6). At step 13 it basically enters into a (rather fatal) process of reading almost nothing but undo exclusively.
Now then, I wonder why this might be. Of course the natural reaction is to say "they data is changing, its read consistency (optional rookie insult)". Now, I found this hard to believe that the volume of data could be so extensively changed, keeping in mind its a good sized table and it's doing a full access.
I checked the DBA_HIST_SEG_STAT(DB_BLOCK_CHANGES_DELTA) view for the period and in the run up, i.e. the explain plan steps 2-12 took approx 20 minutes. In this window, less than 1% of the blocks in the table T6 were changed (approx 3-4k out of a 500k block table).Nearly every access of this table is reading undo, yet since this query started, 99% of the table is unchanged. But the query is behaving as if everything it reads has altered since it began.
To be clear, I understand the read consistency etc and expect it, what I DONT expect is the virtually the ENTIRE table scan operation routing via undo when I'm accessing the full table, yet hardly any blocks are altered after I start running.
Note this query/application seems to fetch the rows in blocks of 1k, its almost as if its re-executing for each fetch, but I wouldn't have expected that.
In summary:
>Query starts
>hits final table
>almost exclusive undo reads
>under 1% of block changes in read table since query began
Is there any other way anyone knows of that might cause a session to read into undo beyond a session changing data after the query executed?
Is there any script that give us output of all Stale Statistics in Oracle Database
View 8 Replies View Related
