I have data such as 'hours', 'date' when and employee worked on the project. What I need is to select the total amount of hours per month of March, April, May, etc...
I know how to select data per single date but wonder how to do it per multiple dates. How does one select total amount of hours per multiple date ranges (March, April...)?
I'm trying to work out how to take a table like this:
IDDate
12502-Feb-07
12516-Mar-07
12523-May-07
12524-May-07
12525-May-07
33302-Jan-09
33303-Jan-09
33304-Jan-09
33317-Mar-09
And display the data like this:
IDPeriodPeriod StartPeriod End
125102-Feb-0702-Feb-07
125216-Mar-0716-Mar-07
125323-May-0725-May-07
333102-Jan-0904-Jan-09
333217-Mar-0917-Mar-09
As you can see, it's split the entries into date ranges. If there is a 'lone' date, the 'period start' and the 'period end' are the same date.
Can we insert multiple dates within give range in a single insert statement say from 1st Feb to 31st MAY 04,something like after insertion it should resemble like below
01-FEB-04
02-FEB-04
03-FEB-04
04-FEB-04
05-FEB-04
.
.
.
31-MAY-04
I have to get totals from a table using different criteria, which I do like this:
<QUERY>
SELECT DISTINCT
SUM(CASE WHEN MYCONDITION1 THEN 1 ELSE 0 END) AS TOTAL1,
SUM(CASE WHEN MYCONDITION2 THEN 1 ELSE 0 END) AS TOTAL2
FROM TABLE1, TABLE2
WHERE COMMON_CONDITION1 AND COMMON_CONDITION2
AND datevalue1 >= DATE1 AND datevalue1 <= DATE2;
<QUERY>
This works fine and I get the intended result.Now, I have to repeat this for every week for the last 12 months, excluding holidays period. So, I generate a set of date ranges which will be used in the queries. So, I repeat the above sql statement for all the date ranges, which is a lengthy process.How can I do that in a single shot and get all totals for each date range.
Lets say I have a table,
Claim_id,dateA,dateB
it has 5 million rows
I need to see if any dateA,dateB of a claim_id falls within any other dateA,dateB of another claim ID
Basically
select * from table a, table b, where
(a.dateA,a.dateB) overlaps (b.dateA,b.dateB)
now I can write the query simply enough by aliasing the table 2x but no matter how I try I cant see a way to get around doing a Carteasion join
Index are ignored because it has to scan the full table anyway even if I hint the index
and the cost of the join ends up astronomical aka 5million rows X 5 million Rows....
And it ends up doing the full table scan a few times
AHHHHHHHHHHHHHHHHHH
this table is expected to grow to at least 20 million records
I'm looking to see if there's a solution to my problem that I can use within the context of my business application interface into an Oracle RDMS. I have access to write custom SQL statements and functions, but I am NOT able to create stored procedures using the interface I have.
The challenge I am having is comparing date ranges. I have a table containing two columns labelled START TS TIME and END TS TIME, both of type 'Date'. I have figured out how to query each row against a given Next Session Start and Next Session End and determine if each row overlaps that row.
I need a procedure that will be recursive: that is, set Next Session Start and Next Session End to START TS TIME and END TS TIME of the first row, compare all rows against it, then set Next Session Start and Next Session End to the next row, compare all rows, ... for all rows in the table. I want to know what the maximum number of matches is (i.e. the most time periods that overlap).
If I could use a stored procedure I could complete this query easily. Is there other techniques (i.e. functions) available to leverage in order compare each row of date ranges against ALL rows in the same table?
I have TableA which has data like below.
ID NAME CRT_DTE
1 AB 03/05/1992
2 EF 15/04/1995
3 CD 20/08/1995
4 GH 01/01/1999
5 UV 08/07/2001
[code]....
I want a query which splits the total time period (from min crt_dte to max crt_dte) into year ranges.For eg, lets say a range of 5 years then I need to get results like below.
start_dte end_dte
---------- ----------
03/05/1992 03/05/1997
03/05/1997 03/05/2002
03/05/2002 03/05/2007
03/05/2007 09/03/2012
how to write this query.
I have this requirement to pull the ACTIVE days that a participant holds true in a given month for a specific position he/she holds.
The three date ranges here are: LOA dates(leave of absence), XFER dates(TRANSFER in/out of the position),Quality compliance(QUAL start/end dates).
So,
INACTIVE DAYS = [(LOA + XFER + WW) - OVERLAPPING DAYS OF (LOA+XFER+QUAL)]
Here is the scenario:
---------------------
CREATE TABLE PAYEES
(
RUN_PERIOD DATE NOT NULL,
PAYEEID VARCHAR2(20 BYTE) NOT NULL,
LOA_START_DATE DATE,
LOA_END_DATE DATE,
[Code].....
---------------------------------------------------------
---------------------------------------------------------
Now Active days is to be pulled for Two payees - TESTD01 and TESTD02 for the period of June month.
Desired Results :
Payee InActive_days Active_Days Period
---------------------------------------------------------------------------------------
TESTD01 13 17 June
TESTD02 14 16 June
I am able to pull out the no of days on a individual basis(count of days for Xfer/LOA/Qual) but I am really not sure as to how should i go about determining the overlapping days between 3 date ranges to determine the ACTIVE/INactive days.
I am studying Oracle® Database VLDB and Partitioning Guide 11g Release 2 (11.2),
ORA-14767: Cannot specify this interval with existing high boundsby giving an example other than given in the above mentioned document.
the example given in the document is as follows:
To increase the interval for date ranges, then you need to ensure that you are at a relevant boundary for the new interval. For example, if the highest interval partition boundary in your daily interval partitioned table transactions is January 30, 2007 and you want to change to a monthly partition interval, then the following statement results in an error:
CREATE TABLE transactions
( id NUMBER
, transaction_date DATE
, value NUMBER)
PARTITION BY RANGE (transaction_date)
[code]/...
I have installed Oracle Database 11g.2 by database configuration assistant on windows XP as and adminstrator on my laptop(no connection to network),but when I want to create database I face this warning: error securing database control ,Datatbase control has been brought up in non-secure mode . to secure the database conntrol execute following command....(error is attached).
View 7 Replies View RelatedI have more 100 partition in a table, I would like to query 10 partitions alone in single statement, Hope it could be possible like query data for single partitions, provide the syntax for the same.
Because if I try to query for all the partition then the query is Hanging due to the large no of data, then I can query single partition by partition then it takes more than a day. so, I would like query data for 10 partition in a single select.
I have two tables containing dates:
A
From____________To________
01.01.2009 || 01.01.2010
01.01.2013 || 01.10.2014
B
From____________To________
01.01.2007 || 01.01.2008
01.01.2011 || 01.10.2012
01.01.2009 || 01.01.2010
01.01.2015 || 01.01.2016
I need to get list of all entries from Table A and entries from B where dates are before min begin date from A or somewhere between any entry from A.
In this Example result:
From____________To________
01.01.2007 || 01.01.2008
01.01.2009 || 01.01.2010
01.01.2011 || 01.10.2012
01.01.2013 || 01.10.2014
I have a SELECT INTO statement as follows:
-----
SELECT SUM(s1.PRODUCT_QTY) INTO anz
FROM EXACTS_TRANSACTION_HAS_PDTS s1, EXACTS_TRANSACTIONS s2, EXACTS_PRODUCTS s3
WHERE s1.SALES_ORDER_ID = s2.SALES_ORDER_ID
AND s2.REGION = 'ANZ'
AND s1.GCM_OPP_ID = s2.GCM_OPP_ID
[Code]..
The statement sums up all the products attributed to the region ANZ and stores it in a NUMBER variable called anz.
The issue is that I have multiple regions: ANZ, JP, ASEAN etc. Wat I would do is to create a statement for each and every region. Is there a way to consolidate them all into a single statement. that means something like
-----
SELECT SUM(s1.PRODUCT_QTY),SUM(s1.PRODUCT_QTY),SUM(s1.PRODUCT_QTY) INTO anz, jp, asean
FROM EXACTS_TRANSACTION_HAS_PDTS s1, EXACTS_TRANSACTIONS s2, EXACTS_PRODUCTS s3
WHERE ..................
-----
here is my query
select
max(PERIOD_DUE_DATE) , form_submission_id
from form_submission
group by
form_submission_id
but this returns all the records, I need only the max date along with its form_submission_id.In reality Its a complex query but to explain my problem I putting this simple query, how to select max(column) and column2 from table.
How do I select only last date for each contragentid? So for contragentid = 111270 it should be only '14.05.2010'.
select dd.contragentid,
decode(dd.ratingvalue,'PK1',1,'PK2',2,'PK3',2,'PSR',2,'UN4',2,'VVL',2,'BK',4,3) as ratingvalue from
(select 36 as contragentid, 'UN1' as ratingvalue, '25.02.2010' as ratingstartdate from dual
union all
select 111270 as contragentid, 'PK1' as ratingvalue, '26.11.2009' as ratingstartdate from dual
union all
select 111270 as contragentid, 'PK3' as ratingvalue, '14.05.2010' as ratingstartdate from dual
union all
select 111270 as contragentid, 'BK' as ratingvalue, '14.06.2011' as ratingstartdate from dual ) dd
where dd.ratingstartdate <= to_date('31.05.2010', 'DD.MM.YYYY')
Also I need to select all rows from second test case for those contragentid which absent in first case, it should be one statement for both cases.
select * from
(select 5 as contragentid, 2 as ratingvalue from dual
union all
select 111270 as contragentid, 1 as ratingvalue from dual ) hh
I've read so many different pages on this topic but I can't seem to get my query the way it needs to be. Here's the query:
select admitnbr, lastname||', '||firstname||' '||finitial, hphone, mobile, wphone, med_rec, dob
from patients join schedule using (key_patien)
join adtmirro using (key_patien)
where appt_state = 'ON HOLD'
Because patients in my database can have multiple appointments "on hold" there are duplicates in the results. I only need 1 record per patient in order to forward this information into an automated dialer to contact that patient. I do NOT want to call the patient over and over again. Once will suffice. I'm trying to make a distinction on the column 'med_rec'. One row per 'med_rec' will be awesome but I can't find a way to create a distinct on that column.
I am working on the following SQL select and I am having a mental block on how to get it fixed. I have two tables that I need to match on the codes in each table. If there is a just one record in Table1 with the same code as one record in table2 and both the date and name match then dont output those two records. Output all records if there are more than 1 record with the same code in each table. Below is some example data that is representive of a sample in the two tables and how the output should look based on that data:
Table1
code date name
aaaa 1/1/2003 billy bob
bbbb 2/2/2004 louis lewis
cccc 3/3/2005 joe crab
dddd 4/4/2006 mary little
eeee 5/5/2007 joe black
Table2
code date name
aaaa 2/2/2004 larry cole
aaaa 3/3/2005 nat king
bbbb 2/2/2004 louis lewis
cccc 3/3/2005 joe crab
cccc 6/6/2008 dennis jackson
dddd 7/7/2009 missy muffet
dddd 5/5/2007 joe black
eeee 8/8/2010 elton rocket
desired output results from select
aaaa 1/1/2003 billy bob aaaa 2/2/2004 larry cole
aaaa 1/1/2003 billy bob aaaa 3/3/2005 nat king
cccc 3/3/2005 joe crab cccc 3/3/2005 joe crab
cccc 3/3/2005 joe crab cccc 6/6/2008 dennis jackson
dddd 4/4/2006 mary little dddd 7/7/2009 missy muffet
dddd 4/4/2006 mary little dddd 7/7/2009 missy muffet
eeee 5/5/2007 joe black eeee 8/8/2010 elton rocket
Here is the select that I have so far:
select table1.rowid, table1_code, table1_date, table1_name,
table2.rowid, table2_code, table2_date, table2_name from table1, table2
where table1_code= table2_code
order by table1_code;
The above select gives me all records just fine, but does not eliminate single records that match. I tried using the Count(table1_code) > 1 and table2 code but I get a message about inproper grouping.
I have had a google around and can't seem to find an answer as to how do do the following Select statement. i am wanting to Select the following fields from across multiple tables.
(field.table)
CustName.CUST
SalesNo.SALE
SalesDate.SALE
ItemDes.ITEM
Qty.SALEITEM
OrderComplete.SALEITEM
with 2 types of WHERE criteria:
WHERE SalesDate is between 'dateX' AND 'dateY'
and also WHERE OrderComplete = 'Y'
i understand this will require some sort of join in the statement so the keys for the different tables are as follows:
CUST
CustNo - PK
SALE
SalesNo - PK
CustNo - fk
ITEM
ItemNo - PK
SALEITEM
SalesNo -fk
ItemNo - fk (compound PK)
i have had a play around with using some joins & embedded statements
My table has the follwoing 3 columns (in addition to others)
Col Name = active ; type=number ; values=1 (true) or 0 (false)
col name start_date ; type=date; format=dd-mmm-yy
col name end_date ; type=date; format=dd-mmm-yy
I need to select all rows where all active=1, start_date=<today and end_date=>today
my sql is: SELECT id, start_date, end_date FROM offers WHERE (active='1' AND start_date<='14-SEP-09' AND end_date>='14-SEP-09');
However the results are not right. Example, the first row returned is: Offer5000312 01-JAN-09 11-DEC-08
This is not correct. Due to the end_date this row should not be part of the results.
I'd want to select multiple records in my multi-record block. I'd also want to do that with checkboxes. When the user clicks on a particular checkbox, that should be selected and whatever record the user wants to check it should be added to selected records.
View 39 Replies View RelatedI want to run multiple IF Else statements in a single select SQL, each statement is one SQL operating on the same table, what is the best way to write this select SQL query ? If it is PL/SQL, when i get the result from the first IF statement I will skip the remaining execution, and so on..
View 9 Replies View RelatedI have following queries:-
#select name from v$database;
#select log_mode from v$database;
#select count(*)"INVALID_OBJECTS" from dba_objects where status='INVALID';
#select count(*) "INVALID_N/A_INDEXES" from dba_indexes where status!='VALID';
#select count(*)"Invalid Triggers" from user_objects where OBJECT_NAME like '%TRIGGERS%' and status='VALID';
#select count(*) "Broken Jobs" from dba_jobs where broken!='Y';
#select count(*) "Block Corruption" from v$database_block_corruption;
i want a table which can be generated just by select cmd and it will list the result of all the above queires as follow:-
DB_NAME ARCH_MOD INV_OBJ INV_IDX INV_TRG B_JOB BLK_CRP
---------- -------------------------------------- -------------------------------------- ---------- ---------- ---------- ----------
PROD NOARCHIVELOG 0 86 6 3 0
I mean to say i want multiple select queries into 1 table (note:- i m not saying to create a tables and then insert,update(using select from other tables), its just a sheel script that will fetch these record into a txt file)
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
"CORE10.2.0.5.0Production"
TNS for Linux: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
See attached file for creation script and data load.Each staff member is required to complete at least one task every three years. The source table contains an EID (aka User ID) and a date column for each task with a date of when the task was completed. If a task has never been started/completed the date value is "NULL".
If a row looks like this:
EID,DATE01,DATE02,DATE03,DATE04,DATE05,DATE06,DATE07,DATE08,DATE09,DATE10,DATE11,DATE12,DATE13
68,NULL,11/10/2009,5/3/2010,4/22/2012,NULL,NULL,4/14/2010,NULL,NULL,NULL,NULL,4/14/2010,4/14/2010
The the result set would look like this:
EID,MaxDate,Within_Last_3_Years
68,4/22/2012,'YES'
The result set will show the EID, date of latest task completed and if the task was completed within the last 3 years from given date (for example June 30, 2012).
I am having a following sql query:
Select
Product.code,
Customer.code,
Backlog.Date
SUM(Backlog.Qty)
From
Product,
Customer,
[code]....
Using this query i am getting following output::
Prod Cust Date Qty
A X 17-june 1000
A X 18-june 2000
A X 21-june 4000
B Z 11-May 200
B Z 15-May 500
C W 1- Dec 300
Out of these groups, i want to select qty for each product and customer, where date is maximum,that is following results::
Prod Cust Date Qty
A X 21-june 4000
B Z 15-May 500
C W 1- Dec 300
what condition/clause should i add in my query,tried a lot with having clause but on success.
How to select max value of date column which tables are having date coulmn.
View 1 Replies View RelatedI have a sql query where I need to select only records with an 18 month gap between max(date) and previous date( no dates between max(date)and 18 month gap date), when I run the below query it should only select supid 130, not 120 (even though 120 does contain an 18 month gap date it also has a date that is less then the 18 month gap( '25-NOV-2012','DD-MON-YYYY'). how would get the query to look back 18 months for the next date and evaluate the month_between.
. example:
create table supply(supID number(8), supply varchar2(20), supdate Date,supamount number(13,2));
insert into supply values(100,'Tapes',to_date('01-AUG-2013','DD-MON-YYYY'),50.00);
insert into supply values(100,'TV',to_date('01-APR-2013','DD-MON-YYYY'),250.00);
insert into supply values(100,'Discs',to_date('25-DEC-2012','DD-MON-YYYY'),25.00);
insert into supply values(120,'Tablets',to_date('25-AUG-2013','DD-MON-YYYY'),15.00);
[Code]....
and p.supid in(select s.supid from supply s where months_between
(s.supdate,p.supdate)<-18) SUPID SUPPLY SUPDATE SUPAMOUNT---------- -------------------- --------- ---------- 120 Tablets 25-AUG-13 15 130 Discs 25-JUL-13 75
i am trying to left join a selection of two or more tables. what i have found, and solved part of my problem, is that oracle left joins only the last table in the select statement ...
i.e : select * from A, B left join C on C.id = A.id wouldn't work because left join applies to B and not A.
but as my queries grow i need to make something as follows :
select * from A, B
left join C on (C.ID_A = A.ID and C.ID_B = B.ID)
[... evantually more left joins as the preceding one may go here]
this query works for DB2 but Oracle claims that "A"."ID" is an invalid identifier, while the B.ID is recognized since it's the last table stated before the "LEFT JOIN" keyword.
I'm trying to select id's in a table that have 2 certain values for another column. Example below explains:
idCoupon Type
123Amount
123Percent
456Amount
789Percent
I would like to write a sql statement that would select all rows where id=123, because id 123 has both coupon types "Amount" and "Percent". So the result set of the sql statement would look like:
idCoupon Type
123Amount
123Percent
I'm updating a large piece of legacy code that does the following type of insert:
INSERT INTO foo_temp
(id, varchar2_column)
SELECT id, varchar2_column
FROM foo;
We're changing varchar2_column to clob_column to accommodate text entries > 4000 characters. So I want to change the insert statement to something like:
INSERT INTO foo_temp
(id, clob_column)
SELECT id, clob_column
FROM foo;
This doesn't work, since clob_column stores the location of each text entry, rather than the actual content. But is there some way that I can achieve the insert with one call to a select statement, or do I need to select each individual record in foo, open the clob_column value, read it into a local variable and then write the content to the matching record in foo_temp?
I have following tables with data as under:
table1: table2:
column1 (char) column1 (char) column2 (num)
A A 10
B A 20
C B 15
D C 12
E D 25
D 9
I need to generate output as :
column1 column2
A A10, A20
B B15
C C12
D D25,D9
E null
Is there anyway to achieve this thru simple SELECT ...and if not, then thru any PL/SQL construct..?
