I have to see the information of DATA1,DATA2,DATA3,DATA4,DATA5 .
How can I write the select statement to see THE above AS follows
datas--column name
DATA1
DATA2
DATA3
DATA4
DATA5
I have the below data in table test_1.
select * from test_1
IDNameTotal
-----------
1A100
2B100
3C100
4D100
test_2 table contains the concatination of ID's with comma seperated. Actually in this table ID column is of datatype varchar2.
select * from test_2
ID
----
1,2,3
My requirement is to select the data from test_1 table where the id values in this table exists in test_2 table. I tried with the belowselect statement, but could not get any data.
SELECT * FROM test_1 WHERE to_char(id) IN (SELECT id FROM test_2)
create table test_1 (id number, name varchar2(100), total number)
create table test_2(id varchar2(100))
insert into test_1 values (1,'A',100)
insert into test_1 values (2,'B',100)
insert into test_1 values (3,'C',100)
insert into test_1 values (4,'D',100)
My scenario is to insert values into 'out' column by comparing 's' and 'IP' columns of temp table.The exact situation is at first need to go to ip column,take a value and then go to source column and check for the same value of ip which is taken previously.Then after corresponding ip of that source column should be inserted back in previous source column.
The situation is marked clearly in file which i am attaching with '--' comments at respective places.I am also pasting the code which i tried out,unfortunately it is giving error as exact fetch returns more than requested number of rows since there are duplicates in the table.I tried it using nested for loops.Also implemented using rowid,but it didnt work.
fixing the errors or if there is any new logic that can be implemented.
DECLARE
i_e NUMBER(10);
BEGIN
FOR cur_1 IN(SELECT IP from temp where IP IS NOT NULL)
LOOP
FOR cur_2 IN(SELECT IP from temp where s=cur_1.IP)
[Code]...
I am searching the simplest way for ad hoc MINUS.I do:
SELECT *
FROM uam_rss_user_XXXXXXX
WHERE host_name IN
('XXX0349',
'XXX0362',
'XXX0363',
'XXX0343',
'XXX0342',
'XXX0499',
[code]....
and look in the table which values are missing (values that are in host_name IN but not in actual table).is there a simpler way for doing an ad hoc MINUS? I know to insert values in temp. Table. How are experienced Oracle pros doing this task?
I have this table :
column1 column2
--------- ---------
value1 value2
value1 value3
value2 value4
value3 value7
value7 value1
value8 value9
What I was trying to retrieve is something like that:
Quote:
output_column
---------------
value1, value2, value3, value4, value7
value8, value9
I don´t care about the order of the values in the row. In other words, I want to get disjoint sets of data connected by any of both values.Every pair in the input table is unique.
I have seen in the web that it is possible to do using connect by and hierarchical retrieving but I've been trying to make a lot of combinationts and I can reproduce the output.
I have got two tables emp_dtl and iou_tab. i have already made entries i.e booking no, emp_cd, emp_name etc in emp_dtl snc its my master table. I want to retrieve the booking nos through lov in iou_tab which are generated in emp_dtl and corresponding info of emp_cd and emp_name should come in the respected fields in iou_tab.
View 1 Replies View RelatedI have a table AUD$ (containts some data) and aud_new(exactly structure same as AUD$ table with no data)
i want to schedule a job which will insert all data from AUD$ into table aud_new$ from aud$ table on next day again data from aud$ should be append to aud_new table and aud$ table should be truncated again.
The job should run on every day at midnight at 2 am
(note : If insertion in table aud_new get fail due to any reason , the aud$ table must not get truncated )
I've tried to Update table with values from another table, but I couldn't.Is there a single way to do that with just one query?Below goes an example:
CREATE TABLE TEST1 (
COD NUMBER,
DCR VARCHAR2(10) );
CREATE TABLE TEST2 (
COD NUMBER,
DCR VARCHAR2(10),
DCR2 VARCHAR2(10) );
[code]....
I want to UPDATE the field DCR of the table TEST1 with the VALUE of the field DCR2 of the table TEST2.At the end, after the update, the table TEST1 would be like that:
SELECT * FROM TEST1
COD --- DCR
------------------
1 'TESTE3'
I have an requirement like below and would like to have SQL for that.
Source Table:
EMP_NO EMP_CODE
1 'A'
1 'D'
1 'E'
1 'F'
2 'S'
2 'A'
2 'W'
2 'Q'
3 'A'
3 'T'
3 'D'
3 'E'
4 'D'
4 'A'
I want to load only data which has EMP_CODE as A and doesn't have subsequent 'E' or 'F' in it. In the above source you can see EMP_NO 2 and 4 satisfy the condition and rest wont. So i want the output data like below.
Desired output:
EMP_NO EMP_CODE
2 'A'
4 'A'
I am attempting to use the following select to get a specific emplid. However, the ps_names table contains some alphabetic characters. I want to only focus on the emplid's that contains numbers. Is there a way to modify the following select to do this?
bubbagumpshrimp
"ORA-01722: invalid number"
SELECT x.y
from (select PERCENTILE_CONT(0.10) WITHIN GROUP (ORDER BY to_number(emplid)) over () y
from PS_NAMES
where emplid > '000000000' and emplid < '999999999') x
where rownum = 1;
I have a table and data like mentioned below.
create table emp( ename varchar2(20));
insert into emp values ('122');
insert into emp values ('abc');
insert into emp values ('0.2');
insert into emp values ('0-5');
insert into emp values ('25-30');
SQL> Select * from emp;
| ENAME |
-------------------
| 122 |
| abc |
| 0.2 |
| 0-5 |
| 25-30 |
I am running the code
SQL>select regexp_substr(ename , '^[[:digit:]]+.[[:digit:]]+$|^[[:digit:]]+$')
from emp;
AFTER RUNNING I AM GETTING THIS
| REGEXP_SUBSTR(ENAME,'^[[:DIGIT:]]+.[[:DIGIT:]]+$|^[[:DIGIT:]]+$') |
---------------------------------------------------------------------
| 122 |
| (null) |
| 0.2 |
| 0-5 |
| 25-30 |
| (null) |
Why it's not excluding '0-5' and '25-30', how I should write code to exclude this and Is there is any function in oracle to check for numeric in column and print.
Below given is the sample data
SELECT *
FROM
(
SELECT 1 ORDR_ID, TO_DATE('01-JAN-2012', 'DD-MON-YYYY') INWD_DATE, 5 SIZE_, 'APD' Colr_CD FROM DUAL UNION ALL
SELECT 1 ORDR_ID, TO_DATE('15-JAN-2012', 'DD-MON-YYYY') INWD_DATE, NULL SIZE_, 'KPD' Colr_CD FROM DUAL UNION ALL
SELECT 1 ORDR_ID, TO_DATE('16-JAN-2012', 'DD-MON-YYYY') INWD_DATE, NULL SIZE_, 'ALD' Colr_CD FROM DUAL UNION ALL
SELECT 2 ORDR_ID, TO_DATE('02-JAN-2012', 'DD-MON-YYYY') INWD_DATE, 9 SIZE_, 'APD' Colr_CD FROM DUAL UNION ALL
SELECT 2 ORDR_ID, TO_DATE('05-JAN-2012', 'DD-MON-YYYY') INWD_DATE, 10 SIZE_, '' Colr_CD FROM DUAL UNION ALL
[code]....
Where every first row is the initial entry for an order and following rows are the changes done to the order with modification date
And the expected output is
ORDR_ID Start_date End_date SIZE_ COLR_CD
1 01-01-12 01/15/2012 5 APD
1 01/15/2012 01/16/2012 5 KPD
1 01/16/2012 00-01-00 5 ALD
2 01-02-12 01-05-12 9 APD
2 01-05-12 01-06-12 10 APD
[code]....
I cam use a select statement within select, but wanted to write an efficient SQL...
I'm using
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0
I'm having a table which has a column which has values given inside square brackets.
[[[123412]]] ,[[[[werer34]]]],'[[qw2_w3rt]]
Now, the requirement is to get the values which are inside the innermost square brackets.Such as in
First case : 123412
Second one: werer34
Third : qw2_w3rt
Only the values inside are needed. Is there any way to achieve it using Pl-Sql or just using Sql ?
I need to add values of one column values from a table to another table each value as a column. Below i am considering only for 3 values in real time i have more than 50 values
CREATE TABLE TEST_REG ( VAL VARCHAR2(1));
INSERT INTO TEST_REG VALUES ('A');
INSERT INTO TEST_REG VALUES ('B');
INSERT INTO TEST_REG VALUES ('C');
CREATE TABLE TEST_HOLD ( COL1 VARCHAR2(1),COL2 VARCHAR2(1),COL3 VARCHAR2(1)); -- in realtime i have 100 columns
Now i need the output as:
when i
select * from test_hold;
COL1 COL2 COL3
A B C
i have a table which has 2 columns.1st column has userId and the other contains an xml data as a link.on clicking that link a new file opens containing the data in xml format.
<fields>
<field key="Public Email">piyush@chand.com</field>
<field key="Location">bangalore</field>
<field key="Website" />
<field key="Birthday">0001-01-01 00:00:00</field>
<field key="Gender">Male</field>
<field key="Language">English</field>
</fields>
i need to access location of a particular userId.How can i do that?
I have a table called 'price' and want to update it with a table called 'update'. See workbook in the attachment.
The idea is to update the table 'price' with values from 'update' as long as the values from 'update' are different then the values in 'price' or the value in price with 'enddat' empty is not present in 'update'. you can still follow this...
Example:
Enddat for df_location 4 from 'price' is empty and df_location 4 is not present in 'update' so 'enddat' for this df_location should be filled with any date from 'update' (there is always going to be just one distinct date).
I have tried something like this:
proc sql;
insert into work.price (enddat) where enddat = ''
select (date) where df_location not in (select
df_location from work.update);
;
quit;
Well this obviously doesn't work. I'm trying to pass 2 criteria (when enddat is empty and df_location is not present in 'update') but I'm not sure where to put them...
Below is my trigger:
CREATE OR REPLACE
TRIGGER AR_BANDS_TEST
BEFORE INSERT OR DELETE OR UPDATE ON FEE_BANDS
REFERENCING OLD AS OLD NEW AS NEW
FOR EACH ROW
BEGIN
[code]...
I want the old and new values to come in a single row of the table while inserting in trigger like below:
OLD_FEE_RU OLD_FEE_BANDS_ID OLD_RATE_NUMBER OLD_RATE_PERCENT NEW_FEE_RU NEW_FEE_BANDS_ID NEW_RATE_NU
---------- ---------------- --------------- ---------------- ---------- ---------------- -----------
TESTALL 1 0 1 TESTALL 1 0
I am using pay user tables to store the balance values.
Example:
IF rec.balance_name = 'Gross Earnings'
THEN
l_gross := bal_function(g_assg_id,rec.balance_name,'_ASG_GRE_YTD',p_effct_date);
END IF;
from the above I should not hardcode ('Gross Earnings ) value, so I placed this value in pay user table that can be changed by different clients. how do i refer user table values for the right earnings/net/overtime pay values that can be placed in user table.
I need to insert rows in a table all the columns are have same value except one column i.e.
insert into table values( 'a','b','b','b');
insert into table values( 'b','b','b','b');
insert into table values( 'c','b','b','b');
is there any short cut to insert because there are thousands of records to be inserted.
I have a table EMP having columns User_Id, ENO,Org_ID, Dept_ID.Now I would like to insert values into this EMP table using below conditions.Insert into EMP
(user_seq.nextval,(select empno from employees where empno in(....(empnumbers), (select org_id from organizations where org_name=' XXXXXXXXXX'), (select dept_id from DEPT where dname in ('MANAGER','ANALYST','SALESMAN') ))
provide me the query for the above requirement.
I have the following database function.
GetRegionDetails(id in varchar2, o_lat out number, o_lon out number);
The problem is, the output values are returning as whole numbers ie. 38.108766567 is being returned as 38 and -78.16423574566 is returned as 78
what data type I should use so that my output is returns all the decimal values?
what could be effective data type to store large integer values like, 50,000; 10,000,000 etc.?
View 3 Replies View RelatedEnterprise Edition Release 10.2.0.5.0
SQL> SELECT * FROM NLS_DATABASE_PARAMETERS where parameter = 'NLS_CHARACTERSET';
PARAMETER VALUE
------------------------------ ----------------------------------
NLS_CHARACTERSET AL32UTF8
SQL>
There is table (VIN_TEMP) in my company database containing following records. It seems like this table should contain some greek language special chracter values instead of this weird data.
SQL> select * from vin_temp;
ATTR
--------------------------------------------------------------------------------
���9999
���9998
���9997
���9997
[code]....
Client are reporting these records as invalid and requesting us to fix. As i investigated i found out, this table was created and loaded few year back. Client sent us one time files which we loaded into this table. I was able to find the code which was actually used to load this table, but unfortunately i was not able to find the raw files where we load this data from...
It seems like Previous Developer specified character set "UTF8" statement, in his sql loader script, to load this data. It seem those file contain some Greek language special character data which was not support by "UTF8" charater set and result in creating those invalid data. My Job is to fix these invalid records and convert them back to its original values which were present in the raw file. I tried to contact client and see if i can find out the raw files but no luck. I tried to use convert function as mention to convert this data from "UTF8" to our current character set format but no luck.
SQL> SELECT attr, dump(attr), convert(attr,'UTF8', 'AL32UTF8') from vin_temp;
ATTR DUMP(ATTR) CONVERT(ATTR,'UTF8','AL32UTF8'
------------------ ---------------------------------------------------------------- -----------------------------
���9999 Typ=1 Len=13: 239,191,189,239,191,189,239,191,189,57,57,57,57 ���9999
���9998 Typ=1 Len=13: 239,191,189,239,191,189,239,191,189,57,57,57,56 ���9998
���9997 Typ=1 Len=13: 239,191,189,239,191,189,239,191,189,57,57,57,55 ���9997
���9997 Typ=1 Len=13: 239,191,189,239,191,189,239,191,189,57,57,57,55 ���9997
[code]....
Here is the script to create table with those type of invalid records.
create table VIN_TEMP
(
attr VARCHAR2(50 CHAR)
);
insert into VIN_TEMP (attr) values ('���9999');
insert into VIN_TEMP (attr) values ('���9998');
[code]....
I am working on a form having three data blocks
Travel_Inconvineance (Master)
TI_Card_Info (Detail)
TI_Limit_Indemnity (Detail)
On working TI_Card_Info i have 2 columns Plastic_Card_Id and Plastic_Card_Type which i want to be paste on TI_limit_Indemnity data block as i enter in TI_Card_Info.
I am fetching data in the following set
NameWeight_LWWeight_TWChange
A56 56 0
B34 NULL -34
CNULL 77 77
Here Change=(Weight_TW -Weight_LW)
I should get values as 0, -34 and 77. But I don't get this as all operations with null gives null. These are fetched data and don't exist in the form shown. I have to use these row values of "Change" further. Is there any way of obtaining these results?
As data completeness, data consistency, data integrity are some of features of good quality data. What is best approach and best practice to deal with missing or null values in database? I am facing such type of situation. In a main table, there are several columns have null or missing values.
Get rid of null or missing values. Should I consult source documents from where data was fed into database to achieve maximum data completeness?
In MySQL I can insert the current timestamp by using MySQL's proprietary NOW() function.
Does Oracle have a similar function or method for adding a current timestamp with an INSERT?
I need to delete the duplicate values from plsql table OR move the distinct values in plsql table to other plsql table.
how can i do this ?
DECLARE
TYPE alist IS TABLE OF VARCHAR2(10) INDEX BY BINARY_INTEGER;
p_tbl alist;
BEGIN
p_tbl(1) := 'A1';
p_tbl(2) := 'B2J';
p_tbl(3) := 'A1';
[code]......
The p_tb1 table contains all the above values including duplicates. Now I need only distinct values to be copied in another plsql table of same type.
I want to have sum of Time Stamp Values in a Table. i.e. Group by Query
example : Select Name, Sum(Timestamp column) from Emp group by name;
OR
I have Time values in character column of a table. i.e. Table TT column t1 char(5) values '03:02'
Above mentioned values in more than one line, i want to get the sum of all the values and it should be a time value.
I am trying to insert the following values in a table called as inf_content
The table INF_CONTENT has following two cols
(REQUEST_ID NUMBER(10,0) ,
FLTER_SET_XML "SYS"."XMLTYPE" NOT NULL ENABLE);
===========================================================================================
INSERT INTO inf_content
[code]...
I am getting the error:
Error:
SQL Error: ORA-06553: PLS-307: too many declarations of 'XMLTYPE' match this call
