I need a query to whome i will pass month in number and that should return name of month. If i input 1 it should return Jan,2,Feb but don't use decode etc.
Is there any query with Julian format or any other date function?
I dont want to use ,Case and Decode ,level etc.
I was just wondering that do we have any function available in oracle which returns the last Friday of the month.
In our company we close our monthly books on last Friday of the month and there are few activities that we have to do on the following Monday as a part of month-end activity. Now the following Monday can fall on the same month or at times it falls on the following month.
I have to schedule a report to be sent to a user on the following Monday after the month-end. I need to schedule it using the cron job.
We are using Oracle 9i on Linux platform.
i have an application for a medical laboratory, i insert patients every day , what i want is toget the number of patients for the past month ?2- for the past week ?3- the past day , and so on.
View 11 Replies View RelatedI am trying to get the month number from this date format '19-OCT-12' . when i try to run the below statement i am getting an error like "not a valid month"
select to_date('19-OCT-12','MM') from dual
i need to get value as 10
My need is to calculate rows and write result into column:
c1 if current month is 1st in quarter,
c2 if current month is 2nd in quarter,
c3 if current month is 3rd in quarter.
How do I perform it?
Oracle 11.2.0.1
Windows
create type np_type is varray(3) of number
/
create type cn_type is varray(3) of number;
/
create type cxn_type is varray(3) of varchar2(2000)
/
I created TEST table by below pl/sql block :
declare
execstr varchar2(2000) :='create table test(';
begin
for i in 1..80 loop
[Code]....
*ERROR at line 5: ORA-06550: line 5, column 8: PLS-00103: Encountered the symbol "MYPROC1" when expecting one of the following: := . ( @ % ;
The symbol ":=" was substituted for "MYPROC1" to continue.
SQL>The above procedure will insert the supplied numbered string into the test table which split the numbered string based upon supplied splitids of sp_table.
We have a requirement where we need to pay allowance for the employees based on their number of working days. Say for example if an employee worked from 03/Mar/2012 to 05/Apr/2012.
We have a fixed value for per month 300 Dirhams. But the Number of Days on March s 31 and Number of days in April is 30. So per day allowance for March day would be 300/31 and April would be 300/30.
We are looking for logic opr query which calculates first eh number of days in each month ( across months) and then calculate as below
Number of Working days in March is 31 - 3 + 1 = 29
Allowance A1 = (300 * 29 )/31
Number of Working days in April is 5 ( this also needs to find logical I am guess )
Allowance A2 = (300 * 5 )/30
Then A1 + A2.
The A(n) would be the total allowance where provided the number of month across.
oracle version 11gr2.
In the below sample data column a,b if there is Two (2) consecutive numbers are transposed in column B from A it should return string 'true'.
with t as
(
select '123456789' a ,'123476581' b from dual
union all
select '123456789' ,'123465789' from dual
union all
[Code]....
i need a output as below.
a b val
123456789 123476581 FALSE
123456789 123465789 TRUE
332211 332121 TRUE
54321 54312 TRUE
78901 79801 TRUE
65432 63452 FALSE
Need to find out what the maximum number of concurrent logins are over a period of 1 month. We need to do this as we may need to buy more licences.
View 4 Replies View RelatedI have a requirement to list the data month wise dynamically where month data is also in the same table, hopefully the below posts should bring more clarity to my requirements.
1. Table creation:
Create table T1 (account_no varchar2(15), area_code varchar2(2), bill_month date, consumption number);
2. List table content:
select * from T1;
account_no area_code bill_month consumption
Q00001Q31-Jan-12125
Q00002Q31-Jan-1265
Q00003Q28-Feb-12219
Q00004Q28-Feb-12805
Q00005Q28-Feb-1254
Q00001Q31-Mar-12234
Q00002Q31-Mar-12454
Q00003Q31-Mar-12232
Q00004Q30-Apr-1221
Q00005Q30-Apr-12218
Q00001Q30-Apr-1254
Q00002Q31-May-1219
Q00003Q31-May-1287
Q00004Q30-Jun-12187
Q00005Q30-Jun-1278
so on......so on......so on......so on......
3. Expected output:
account_no area_code Jan-12 Feb-12 Mar-12 Apr-12 May-12Jun-12Jul-12Aug-12Sep-12Oct-12Nov-12Dec-12
Q00001 Q 125 548 2345487423154821518738721512
Q00002 Q 65 127 45487819357831585683152878
Q00003 Q 545 219 2328738735188745897313
Q00004 Q 78 805 1221218187885718387389787138
Q00005 Q 541 54 2621878778386538698182
With the conventional query I hope this is impossible,
In Apex 4.2, the item validation of "Function Returning Boolean" and "Function Returning Error Text"; They seam to be backwards.
Is there a simple statement that can be used to fix this in the apex dictionary?
Using 11gR2, windows 7 client machine. I need to update the table missing_volume (below), where I need to calculate the estimated_missing column. The calculation of estimated_missing column for current month needs previous month numbers (as commented inside the code below). I want the output like the first table. Notice the records start from January, hence estimated_missing for January can't be calculated, but for the the rest of the months it can be done by simply changing 'yr' and 'mnth' (commented inside the code towards the end).
yr mnth location volume actual_missing expected_missing estimated_missing
---------------------------------------------------------------------------------------------------------------------------------
2013 January loc1 48037 24 57
2013 February loc1 47960 3660 53 24
2013 March loc1 55007 78 57 28
2013 April loc1 54345 72 58 77The code:
UPDATE missing_volume g
[Code]....
The code does calculate correct number for 'estimated_missing' as I run the code for each month, but the problem is while updating the current month it also erases the record for previous month. E.g. as can be seen below, after I updated April the column only has the record for April, previous month record is gone, similarly updating March removed February, etc. I can't understand why it's happening!! Here is the output I get:
yr mnth location volume actual_missing expected_missing estimated_missing
---------------------------------------------------------------------------------------------------------------------------------
2013 January loc1 48037 24 57
2013 February loc1 47960 3660 53
2013 March loc1 55007 78 57
2013 April loc1 54345 72 58 77
why it's happening (I mean where is the flaw in the code) and how to get the desired output (first table).
I need for each date sum the values from the begin of the year to present date. In January I will have the value of this month, on February I must sum the value of this month and the value of the month before, and so on, at the end of the year.
Date input
SELECT ID_CLIENT, DT_REG, VAL
FROM (
SELECT 1 as ID_CLIENT, TO_DATE('20100101', 'YYYYMMDD') as DT_REG, 200 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100201', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100301', 'YYYYMMDD') as DT_REG, 200 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100401', 'YYYYMMDD') as DT_REG, 150 as VAL FROM DUAL UNION
SELECT 1 as ID_CLIENT, TO_DATE('20100501', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL UNION
SELECT 2 as ID_CLIENT, TO_DATE('20100101', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL UNION
SELECT 2 as ID_CLIENT, TO_DATE('20100301', 'YYYYMMDD') as DT_REG, 220 as VAL FROM DUAL UNION
SELECT 2 as ID_CLIENT, TO_DATE('20100501', 'YYYYMMDD') as DT_REG, 500 as VAL FROM DUAL UNION
SELECT 3 as ID_CLIENT, TO_DATE('20100201', 'YYYYMMDD') as DT_REG, 150 as VAL FROM DUAL UNION
SELECT 3 as ID_CLIENT, TO_DATE('20100501', 'YYYYMMDD') as DT_REG, 100 as VAL FROM DUAL);
Result
ID_CLIENTDT_REGVAL
101/01/2010200
101/02/2010300
101/03/2010500
101/04/2010650
101/05/2010750
201/01/2010100
201/03/2010320
201/05/2010820
301/02/2010150
301/05/2010250
i am using oracle developer 6i report builder i required this type of query
example
if (:page number LIKE '1')
then
srw.set_text_color('darkred');
end if;
return (TRUE);
end;
but page number is not my table database item how can i use builtan page &<pagenumber> use for conditional format.
My goal is to:
A) extract subscriber numbers from TCME153.SUB then
B) bounce those subscriber numbers off of a disconnect date i.e. DISCO_DTE_SBB then
C) bounce A) and B) off of an item table i.e. ITV_ITEM_VALUE
My hope is that the first query works as intended. Second and third queries throw error 'ORA-01847: DAY OF MONTH MUST BE BETWEEN 1 AND LAST DAY OF MONTH'.
1) SELECT DISTINCT SUB_ACCT_NO_ITV
FROM OPS$MDC.ITV_ITEM_VALUE, OPS$MDC.SBB_BASE, TCME153.SUB
WHERE EXISTS (SELECT SBB_BASE.DISCO_DTE_SBB FROM (SELECT SUB
FROM TCME153.SUB));
2) SELECT DISTINCT SUB_ACCT_NO_ITV
FROM OPS$MDC.ITV_ITEM_VALUE, OPS$MDC.SBB_BASE, TCME153.SUB
[Code]....
I am trying to query on the dates in the table that are the last day of each month. The last day of the month may not be in the table. Example 07/30/2010 is the last day in the table for July 2010, but 07/31/2010 is the last day of the month. My query should give me 07/30/2010 data since it is the last day of the month in the table.
I just need a where clause that will only give me the data for the last day of each in the table.
i want to replace 4 digit number in a given string with the same number incremented by 10000.
That mean in the given sting 1201 should be replace by 11201 (Icremented BY 10000).
Input String:
<query><matchAll>true</matchAll><row><columnId>1201</columnId><dataType>31</dataType><op>Like</op><val>North America - Houston</val></row><row><columnId>1212</columnId><dataType>31</dataType><op>!=</op><val>Agreement Date Mismatch</val></row><row><columnId>1212</columnId><dataType>31</dataType><op>!=</op><val>Facility Type Mismatch</val></row><row><columnId>1224</columnId><dataType>31</dataType><op>Like</op><val>y</val></row></query>
Required output :
<query><matchAll>true</matchAll><row><columnId>11201</columnId><dataType>31</dataType><op>Like</op><val>North America - Houston</val></row><row><columnId>11212</columnId><dataType>31</dataType><op>!=</op><val>Agreement Date Mismatch</val></row><row><columnId>11212</columnId><dataType>31</dataType><op>!=</op><val>Facility Type Mismatch</val></row><row><columnId>11224</columnId><dataType>31</dataType><op>Like</op><val>y</val></row></query>
I have a text field and if the text field has 5 consecutive numbers then I have to extract the number and the previous character from where the 5digit number starting
For example i/p asdfasfsdS251432dasdasd o/p should be S251432
I gone through many forums and found that the number of voting disks should be always in odd number. Then why the maximum number of voting disk is 32?
View 1 Replies View Relatedhow do I count a list of number value eg 1,1,1,1,3,3,6,4 and find the one with maximum number which is 1
View 5 Replies View RelatedWe receive hand punches (clock data) every day. Normally a person badges in(hand punch) which creates a row in the clock_tran_processed table. The information from that hand punch is the employee id (emp_id) the date hand punch occurred and a work_summary id (wrks_id). At the end of the day, the employee badges out (hand punch out) and another entry in the clock_tran_processed table is created. The new row will have the emp_id (employee name), date the hand punch occurred and the same work summary id from the morning.
Normally hand punches should occur in pairs. One in, one out... or one in, out for lunch, in for lunch, out for day. I am seeing intervals of three and five. Meaning the employee clocked in twice and out once, or in once and out twice. This shouldn't happen.
I am writing a report that will show number of clocks per for all employees that have three(3) or five(5) clock entries.I wrote a ref cursor that gives all the employees that have a count of 3 or 5 and the employee id (emp_id). I need to pass that employee id to another query that will then get me the dates of the clocks.Here is the ref cursor thus far (I am printing those with a count of 3 and 5).
CODEDECLARE
TYPE ClockTran_Refcur IS REF CURSOR;
ClockTran_cur ClockTran_Refcur;
NumClock_num number :=0;
NumClock_name clock_tran_processed.emp_id%TYPE;
[code]...
How do I pass that variable to the get the clktranpro_time's? I am using "Easy Oracle PL/SQL Programming" but I am not seeing this type of example(pgs 140-148).
i want to get the last month starting from today onwards.
1) select the record of last month that is if this month is june then select the record for 1st may to 31st of may
I am facing a problem to find the last day of the month which is stored in a variable. i tried the following query which gave me an appropriate answer
select to_char(last_day(sysdate),'DD-MON-YY')from dual
ans : 30-SEP-2012
But I am having only the month in my hand through which I want to find its last day. I cant use sysdate for my query.
I would like to know whether a value obtained from one cursor can be passed to the other cursor as a parameter and by passing it i want to retrieve a list of records and print only the records obtained from the second cursor where the value is passed.
View 3 Replies View RelatedI have table :TABLE_X and want to select some data locate into specific range of Day/Month. But so far i couldn't find out the way to.
For example, i want to select people born within specific range of date(range : sysdate to (sysdate+7months ahead) Year here should not be consider, only the day and month.
e.g. a range could be from today:Sept,20 to Apr,18.
so what i was trying is to select doing the following.
select TABLE_X_ID, TABLE_X_BIRTH_DATE
from TABLE_X
where to_date(TABLE_X_BIRTH_DATE, 'DD/MM')
between to_date (to_char(SYSDATE, 'DD/MM'), 'DD/MM')
and to_date (to_char(SYSDATE+210, 'DD/MM'), 'DD/MM')
first am not sure if BETWEEN & AND will work for this case, bt it was the most logical way i could think about to get such range.
I need to calculate first business day of a given month . Below is complete explanation
Business day=sould not include weekends and holidays.
In a table say ACTIVITY_XX I have all the month begin dates say 01-JAN-2010,01-FEB-2010,01-MAR-2010,01-APR-2010 and so on..and I have a HOLIDAY table where all the holidays are stored.
So using the above info I need to calculate the first business day for a given month. I guess this cannot be done by using a simple SQL query? I was wondering how could it be written using a PL/SQL function.
I'll be passing the month begin date as parameter..so the function should return the first business day for that month.
How to find the total number of Thursday in the current month ?
View 5 Replies View RelatedI've got a TRANSACTION table with about 4, 681 transactions going on over the course of a given year (this is a project for my DB class). I'm trying to create a query that will give the base revenue for each month in that year; so far I've come up with the following:
SELECT DISTINCT
CASE
WHEN EXTRACT(MONTH FROM transaction_date) = 1 THEN 'JAN' || ' ' || EXTRACT(YEAR FROM transaction_date)
WHEN EXTRACT(MONTH FROM transaction_date) = 2 THEN 'FEB' || ' ' || EXTRACT(YEAR FROM transaction_date)
WHEN EXTRACT(MONTH FROM transaction_date) = 3 THEN 'MAR' || ' ' || EXTRACT(YEAR FROM transaction_date)
WHEN EXTRACT(MONTH FROM transaction_date) = 4 THEN 'APR' || ' ' || EXTRACT(YEAR FROM transaction_date)
[code]....
The query returns twelve months, but they're all jumbled up. I tried extracting the month in the ORDER BY subclause
ORDER BY EXTRACT(MONTH FROM TO_DATE(month, 'MM YYYY'));
But I got an ORA-01866: the datetime class is invalid. I'm using Oracle 10g xe (outdated, I know). get the months to show up in order?
How I can see the order by employees,year wise and monthwise (month should start from january and so on..)
SELECT ENAME,TO_CHAR(HIREDATE,'yyyy') YEAR,TO_CHAR(HIREDATE,'Month') MONTH ,count(*) total
FROM EMP
GROUP BY TO_CHAR(HIREDATE,'yyyy') ,TO_CHAR(HIREDATE,'Month');
I want to pass a variable in unix to oracle exp command
I have a file with owner and password
I did
export user=$(head -$riga $file | tail -1)
echo $user
let riga+=1
export psw=$(head -$riga $file | tail -1)
echo $psw
exp $user/$psw file=exp_$current.dmp
but this doesn't work.