ID AMOUNT ID_TYPE APPROVE_FLAG A1 2 A N B1 100 B N A2 3 A N A3 100 A Y
The Select Query should be..All the records should be considered and if the (amount is greater than 50 and approve_flag is N )then except that records all records should be considered.The output should be 3 rows; 2nd row (B1) should not come. writing a select statement for the above conditions.
I have a problem with my Oracle 9i SQL Query and I'm struggling to get it done.
I have three tables namely Student, Lease and Room and want to retrieve data from these three tables.
I want the Student name, the Lease details and the Room No from these tables.
The problem with my SQL query is that I get all the information from the tables except from the Room table, where in the column it show Room_No but the values are not displayed, the query is given below.
I have a table of N records with: Name SeqNo ID Col4 ... ColX
where Name and ID are non-unique, and SeqNo is a monotonic non-consecutive sequence 0 .. N that is unique within ID..I'd like to generate the following 'groups': For each record where SeqNo = 0, sorted by Name, create the 'group where ID is the same, ordered by SeqNo irrespective of the
values of any of the other columns. For instance, if the table contained:
I got my desired results by brute-forcing via four sub-queries:
Sub-query 1 - Generate the sorted Names with SeqNo = 0 Sub-query 2 - Expand above with the additional columns, maintaining original order Sub-query 3 - For each of the records from sub-query 2, generate the 'dependents' having the same ID and SeqNo != 0 Sub-query 4 - Expand above with the additional columns, maintaining original order of sub-query 1 Main query - Create UNION of 2 and 4, sorting by original order and SeqNo
if there were not a simpler approach - after all, this must be a fairly common issue when generating BOMs.
insert into table1(field1,field2)values('A','1'); insert into table1(field1,field2)values('A','1'); insert into table1(field1,field2)values('A','1'); insert into table1(field1,field2)values('B','2'); insert into table1(field1,field2)values('B','2'); insert into table1(field1,field2)values('B','1'); insert into table1(field1,field2)values('B','1'); SELECT field1 FROM table1 WHERE field2=all(select '1' from dual) FIELD1
i have 100 records in table1,like as we have more 15 tables without data. the issue is how can i insert above table1 data(100 records) into different 15 tables in single sql command.
I have a temporary table (with on commit preserve rows property) which is populated thru insert into command from a procedure. After which, i need to query the records from the populated temp table.
However, my query returns nothing. My procedure works fine cause i tried executing it to populate a regular table and it is ok. However, it shows no output in the temp table cause probably it is creating another session. How do i select the rows from the temp table after populating it from a procedure.
I want to display all records from table 1 (even the null values) that do not match records in Table 2. Below I am creating both tables and I am posting the result query I need.
------------------------------------ CREATE TABLE temp_table1 ( name VARCHAR2(12 BYTE), last_name VARCHAR2(12 BYTE), STATE VARCHAR2(2 BYTE), BIRTH_DATE DATE );
CREATE TABLE temp_table2 ( name VARCHAR2(12 BYTE), last_name VARCHAR2(12 BYTE), STATE VARCHAR2(2 BYTE), BIRTH_DATE DATE );
[code].....
The result query need to have 5 rows as shown below
NAME LAST_NAME STATE BIRTH_DATE ------------ ------------ ----- --------------------- john smith MA 12/1/1979 null null AZ null null null CT null null null MA null null null CT null
I am executing a script that is deleting some parent records and the corresponding child records as I have used the "on delete cascade" with the Foreign key Constraint.
My question is that can I list the records that are being delete from all the tables i.e. both parent and child tables. Is some thing like spooling can work in this or do I have some other option with which I can see(select) all the deleted records.
I have a service that executes a pl/sql function (legacy app) to delete records from multiple tables. This function works fine in development, and has worked fine in production until about a week ago. I'm not a DB guy but the DB guys are trying to say this is an application issue. That may be, be the "insuff privileges" really leads me to believe otherwise.
What is causing this type of Oracle error? Permissions between dev and prod are the same, yet it works in dev but not prod.
ORA-29876: failed in the execution of the ODCIINDEXDELETE routine ORA-20000: Oracle Text error: DRG-50857: oracle error in textindexmethods.ODCIIndexDelete ORA-20000: Oracle Text error: DRG-10602: failed to queue DML change to column ABSTRACT for primary key AAAfBoAAEAABa62AAA DRG-50857: oracle error in drexrdml ORA-01031: insufficient privileges [code]....
I have two tables A with columns a.key, a.location_code, a.status and a.first_name and table B with cols b.key, b.location_code, b.status and b.first_name.
I want to find the missing records between the two tables and as well check whether each column is populated correctly. That is if u take a record with id 1 check if loc_code is same in both the tables and if they are different, insert the key and first record column and second record column into a new table. And similarly if there is no record wiht that particular id in the second table, insert the record.
For missing records in the sense for records which are present in A but not in B, am using
Select a.key_no, a.loc_code, b.loc_code from A,B where a.key_no=b.key_no(+) and b.key_no IS NULL
But the problem is I need to put some constraints on the B table like b.status='Married'and b.loc_code='CA'. When am using this condition in the above query, it's throwing me error saying cannot use outer join operator in and or or.And I could not figure out how to check for the columns being populated correctly between the two tables and at the same time check for missing ones
I have two identical tables with same structure and have some duplicates between those two. Finally I want to combine togather and in a single table and knockout the duplicates.
SQL how can we do this in a simple way? each tables has around millions records.
Updated to Add: In a last ditch search, I found my answer with ROWNUM <= 1 in the Where clause. It works and I can go from there with what I want to do.
I have a website that pulls similar information from multiple queries using a Union-based query. I want to only pull 1 record from one section, two from another, and 5 from the third. I've so far found LIMIT but haven't been able to get it to work in that way. Is it possible to limit each query in the union as I am looking to do?
The query is:
SELECTc.priority, c.startDate, p.headline, p.newsID, p.kicker, p.webPath, p.makePopup, p.thumbnail, p.shortDesc, p.storyType, d.filePath FROM (so_news p LEFT OUTER JOIN so_news_deptLevel c ON p.newsID = c.newsID) LEFT OUTER JOIN so_departments d ON d.deptID = c.deptID WHERE p.storyType = 'alert' AND c.display = 'yes' AND c.startDate <= sysDate AND c.endDate >= sysDate UNION All SELECTc.priority, c.startDate, p.headline, p.newsID, p.kicker, p.webPath, p.makePopup, p.thumbnail, p.shortDesc, p.storyType, d.filePath
Ways for improving the Table performance which holds million of records for oracle. Currently we have partitioning and indexing but it doesn't seem to work.
I am trying to insert records into target table from three source tables by using function in a package and I am getting error as follows.
SQL> create or replace 2 PACKAGE casadm.sis_load_cpl_sis_reb_pgm_hist 3 IS 4 /********************************************************************** ******************
[code]....
ERROR at line 1: ORA-06550: line 1, column 7: PLS-00221: 'FN_LOAD1T_CPL_SIS_REB_PGM_HIST' is not a procedure or is undefined ORA-06550: line 1, column 7: PL/SQL: Statement ignored
I have seen the below blog abut database driven menu in java. uRL..... look into the below tables and its data below.I have concerned inserting data in the tables and particularly about
ROLE_DETAILS,ROLE_MASTER and EM_MENUMAS data. select level lvl, ID, NAME, lpad(' ', level * 14, ' ') || NAME menu, parent_NAME,nodetype, page_name from em_menumas [code].....
Im a oracle pl/sql developer but I didnt learn oracle as a language. With my sql skills I started working on Oracle.In my project every table has an associated MLOG$ table for it.
Whenever an insert/update/delete happens it is recorded in MLOG$ tables as I/U/D for the priamry key.So if I do a bulk delete of records in tables an entry is made into MLOG$ tables. So deleting old records in a database doesn't free much space.If this is oracle internal table is it advisable to delete from MLOG$ tables too.
My oracle database is mounted on the Linux server.If I delete bulk records in tables from which path I can see how much space is freed.
select profilename from PROFILE where user_data like '%DATE_RULE!115%';
Output will be "Test A".Now, this is just a single value from RULES table used to find the data of PROFILE table.I will have to run the query on multiple values of RULES tables to find records containing a string format of sort "DATE_RULE!<rule_no>". How to search on WILD CARDs like these?
I have this SQL that returns the correct amount of rows which should be 2:
Select Distinct A.File_Name, A.File_Desc, A.file_location, A.location_date, A.downloaded_date, A.downloaded_id, A.file_size, A.days_to_request, B.File_Name, B.Act_Date, B.date_loaded from SDT_LOG A Inner Join ACTIVITY_LOG B On A.file_name = B.file_name and A.downloaded_date = B.date_loaded
I need to add another field in the Select query which is B.Act_Code. When I do, I get 2 extra rows. I do not know how to make these rows distinct.
The A table's structure is along with sample data for 1st record:
CODE Example of Name Type 1st record. ---- ------- -------------- FILE_NAME VARCHAR2(50) STLMK.txt FILE_DESC VARCHAR2(50) NON-RESIDENT FILE_LOCATION VARCHAR2(50) L:\NonResFiles YEAR NUMBER(4) 2008 LOCATION_DATE DATE 10/10/2007 DOWNLOADED_DATE DATE 09/04/2008 9:17:00 AM DOWNLOADED_ID VARCHAR2(50) Cindy FILE_SIZE CHAR(10) 16212 DAYS_TO_REQUEST NUMBER(3) 60
The B table's structure is along with sample data for 1st record:
CODE Example of Name Type 1st record ---- ------ ----------- FILE_NAME VARCHAR2(50) STLMK.txt ACT_CODE CHAR(2) D ACT_DATE DATE 10/10/2007 ACTIVITY_ID VARCHAR2(50) downloaded on DATE_LOADED DATE 09/04/2008 9:17:00 AM
The second record of activity would all be the same except Cindy would be "Jason", act_code would be an "S", activity_id would be "sent on" and then of course the dates would be changed to whenever the new information was saved within the system.
I am getting something like this (shortened of course):
CODEFile_name Downloaded_ID Act_Code
STLMK.txt Cindy D STLMK.txt Cindy S STLMK.txt Jason D STLMK.txt Jason S
There should only be one row for Cindy with a D act_code and one row for Jason with an S act_code. For some reason, Cindy and Jason each get a row with the different act_code. I'm retrieving 4 rows instead of two when I use B.Act_Code in the SQL statement.
Cindy should have the D Act_Code because she downloaded that file name and Jason should have the S because he sent that file to someone else. Every time a file's activity changes, it is entered into the system so we can keep track of where the files are.
Cindy should have the D Act_Code because she downloaded that file name and Jason should have the S because he sent that file to someone else. Every time a file's activity changes, it is entered into the system so we can keep track of where the files are.
Also, I get the 2 extra rows when I add activity_id field to the select.
First data data block contains a list item and a text item based on the selection of the list item and the value in the text item i need to retrieve more than one row in another data block whose NUMBER OF RECORDS DISPLAYED property are set to 10.
I have a Button in the first data block. So in the WHEN BUTTON PRESSED trigger i wrote SELECT INTO clause which is raising "exact fetch returns more than requested number of rows".Then i used a cursor in the WHEN-BUTTON-PRESSED trigger in the first block to fetch row by row and assign it to the items in second block. But i am able to retrieve only one record in the second block.
create table test_circular_data(c1 varchar2(10),c2 varchar2(10)); insert into test_circular_data values ('c1','l2'); insert into test_circular_data values ('c1','l3'); insert into test_circular_data values ('c3','l3'); insert into test_circular_data values ('c4','l3');
commit;
There is a circular relation between columns c1 and c2, so what I'm trying to retrieve is something like that :
c1--> l2 --> l3 --> c3 --> c4
The steps to get that result is :
1.- c1 related to l2 : c1-->l2 2.- c1 related to l3 : c1-->l2-->l3 3.- l3 in the list and related to c3 : c1-->l2-->l3-->c3 4.- l3 in the list and related to c4 : c1-->l2-->l3-->c3-->c4
