i am using one stored procedure
in which one query is there that is
SELECT to_char(Inpunch,'HH24:mi:ss') into v_Inpunch1 FROM ProcessingPunches
ORDER BY Inpunch ASC WHERE ROWNUM <= 1;
in this i am fetching top 1 value and storing Inpunch value in v_Inpunch1 variable is this query is correct? because i am getting error.
how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>.
I want to get all the column values in a table and save them into a text file.Beside UTL_FILE, is there any other method which will result better performance in writing to text file?
noted that the data does exist 32k.
send me the procedure for loading the data in an oracle table into an excel file.
View 5 Replies View RelatedI have two Tables, the one table is called (calves_per_breed) and contains all my query results. I then have another table (calves_per_breed_crosstable) which is used to place the generated count values in calves_per_breed to create a crosstable from the count data into calves_per_breed_crosstable.
I'm using the following procedure to generate the crosstable from the data inside the calves_per_breed table:
PROCEDURE pcalves_per_breed_genCrossTable
IS
BEGIN
---------------------------------------------------------------------------
--SEX CODES
update calves_per_breed_crosstable
set (m, f) = (select count(decode(geslag, 'M', 1, null)),
count(decode(geslag, 'F', 1, null))
from calves_per_breed)
[codee]....
Now this procedure works 100%, the only problem is it generates the ENTIRE table. if you know how a crosstable works, thetop right section of the table is exactly the same as the bottom left section of the table. I wish to optimize my code so that it only generates the values for the needed columns, and not ALL the columns, as values are generated twise now, which increases the query time! Here is a tipical output of the kalwers_per_ras_crosstable:
Note: You will notice that i used a Column called TID with string values to indicate the vertical columns for the crosstable. The Vertical Columns are the same as the top Columns(which are actual columns, and not row values as the vertical columns)
select *from kalwers_per_ras_crosstable:
TID M F NFR A B C SP RED BLACK SC1 SC2 SC3
----- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
M 138 0 0 0 0 0 138 122 16 74 64 0
F 0 173 0 0 0 0 173 161 12 92 81 0
NFR 0 0 0 0 0 0 0 0 0 0 0 0
A 0 0 0 0 0 0 0 0 0 0 0 0
[code]....
This procedure is not working properly.
create or replace procedure bank_search_sp
(
p_tablename in varchar2,
p_searchname in varchar2,
p_bankcode out varchar2,
p_bankname out varchar2,
p_dist_code out number
)
as
v_tem varchar2(5000);
begin
v_tem :='select bankcode,bankname,dist_code from ' || UPPER (p_tablename) || '
where bankname like '''|| p_searchname||'';
execute immediate v_tem into p_bankcode,p_bankname,p_dist_code using p_searchname ;
commit;
end bank_search_sp;
the Procedure is getting created but i dont know what actually happens when it was executed ,This is the error shown..ORA-01756: quoted string not properly terminated
ORA-06512: at "PENSIONS.BANK_SEARCH_SP", line 14
ORA-06512: at line 1
The problem is, while installing the Oracle Form and Report 11G R2, my installation got stuck on step 15, i.e configuration progress. Waited for 3hrs and still no progress.
Installing on Win 7 64-Bit, with 4gb ram.
Installed Weblogic Server 10.3.5 64bit(using JDK).
I would like to mention that I won't be able to give the data,specific information(like query or table names) about the issue as this concerns the privacy of some multinational company(where I work).
We have windows server and we are currently using Oracle 10g.
Issue-
We have a ProC, which has a SQL statement where it is trying to OPEN a cursor. The cursor query is huge and fetches data from 3 tables. 3 tables have 5k, 600k and 1.7 millions records respectively but the 'where' condition in cursor query makes the total count to 3k lines only.
Now the problem is , we have a schedule reboot of the server every Saturday night and the next day(Sunday night) when the program runs it gets stuck in the query --> OPEN <cursor> . We wait for 5 hours but this OPEN cursor query never executes or completes, that means our program gets stuck here.Eventually we have to kill the program.We have tried running it after killing as well but it again gets stuck.
Now the interesting part. On Monday business happens as usual but in the night when we again run this program it runs within minutes. The records in the tables are more or less same. Open cursor does not get stuck at all. It runs every night properly but every Sunday night it gets stuck. note that the program does not run on Saturday nights. So on Sunday night it runs for the first time after server reboot.
So there is something with Open cursor statement(with so much data) after server reboot. What exactly Open cursor does in memory or database.
I already have 9i installed at my desktop.I tried to install oracle 10g version 1. But it got struck with "oracle database configurations assistant" on configuration assistants window.Then I did the below.
1) I clicked stop, but still didn't get stop.
2) And also the window didn't enable the 'Retro' button
I always get stuck with to_date function.
I keep getting errors when I run this query.
select * FROM table1 WHERE AS_OF_DATE = to_date('9/30/2010 12:00:00 AM','YYYYMMDD HH24:MI:SS')
Error code is : ORA-01858
I have One .FMB Screen and in this Screen One Table , I Compile and attach in ERP System but when I tried to open thst screen is not open and also application is stucking.
View 1 Replies View RelatedMy workflow stuck in Active status and user is not able to proceed further. But it is not happening every time. Sometimes the process activity gets stuck.
View 5 Replies View RelatedI am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies.
View 2 Replies View RelatedI am working on Workflow and the issue is When a person leaves for vacation he can set his vacation rules so that someone has to attend / approve his workflow notifications. But when we set vocation rules all notification goes into errors state and this error can resolve by refreshing/Retry this notification. And the error detail is mentioned below An Error occurred in the following Workflow.
Item Type = CONCSPL
Item Key = 086937-15990
User Key =
Error Name = 100
Error Message = ORA-01403: no data found
ORA-01403: no data found
Error Stack =
Wf_Engine_Util.Function_Call(cust_f_test.f_find_approver, CONCSPL, 086937-15990, 180198, RUN)
[code]....
Bottom line is all notifition should be successfully process and send to dedicated person.
I have created one procedure based on one table item master which has a field called item stock or non stock based on this i will fetch data from one of two tables .If its a stock item data will be retrieved from wip_main_acnt table and if its non stock it will pick from ns_main_acnt.my procedure is working fine but all i need is i just want to put an exception that if data is not found in one of the table based on the item selected.I am confused which one to be used whether no_data_found or notfound%.
CREATE OR REPLACE PROCEDURE dflt_pr_acnt (
l_item_code IN VARCHAR2,
l_main_acnt_code OUT VARCHAR2
)
[code]....
How to import data from excel(.xls) file to data base table
I have excel sheet(.xls) data details, I neet to upload details to data base table using procedure
excel sheet is not CSV file, so SQL Loader is not using
any alternative solution for this issue
primary key constraint on transaction_dtl_bk is affecting the insertion of next correct rows.
CREATE OR REPLACE PROCEDURE NP_DB.san_po_nt_wnpg_1 (
dt DATE
)
IS
v_sql_error VARCHAR2 (100); -- added by sanjiv
v_sqlcode VARCHAR2 (100); ---- added by sanjiv added by sanjiv
[code]...
Does procedure and function contain data?
View 3 Replies View RelatedIn one table I have data. Check the excel sheet i have attached.
One procedure to convert the data as mentioned in the excel sheet .
In a procedure I try to make the following select :
select param_value
into vc_param
from cont_rp_serv where rp_serv_code = 36
and contract_id = 134
and rownum < 2;
But I receive ORA-01403: no data found.
If i run the select normally in a separate window in the same time I got the expected result : Enterprise.
I have checked that table is not locked by another user. Also i do not use triggers at all to get here.
How to pass data of one procedure to another procedure in oracle forms.
View 1 Replies View RelatedI have a stored procedure that is returning no data. I have read this is most common in stored procedures that use a SELECT INTO that tries to put a null in the variable.First, the stored procedure (from SQL Developer) then th execute and error.
PROCEDURE prc_add_address (addr_id OUT integer, addr_type_id IN integer, addr_line_1 IN varchar2,
addr_line_2 IN varchar2 := null, addr_line_3 IN varchar2 := null,
prov IN varchar2 := null, zip_id IN number,
country_cd IN varchar2 := 'USA', addr_start_date IN date,
addr_end_date IN date := null, changed_by IN varchar2,
changed_date IN date, channel_txt IN varchar2 := null)
[code]....
The sad conclusion:
Error starting at line 1 in command:
declare addrid integer := 0;
BEGIN
pkg_vic_person.PRC_ADD_ADDRESS (addrid, addr_type_id => 1, addr_line_1 => '351437 Tall Blvd', zip_id => 14906, addr_start_date => '01-FEB-2011', changed_by => 'RS', changed_date => sysdate);
[code]....
I have a base table by name EMP_MASTER.The Create Statement goes something like this....
CREATE TABLE EMP_MASTER(ST_CODE NUMBER,EMP_CODE NUMBER);We would like to insert records in such a way that there are 10 st_codes and for each st_code we need to insert 100 records.
FOR EX : for st_code 1 we need to have emp_code from 1 to 100 and then we need to insert st_code 2 and the emp_code must be from 101 to 200 and so on...... It must go in this way till we have st_code 10 and hope the emp_code will be in the range of 901 to 1000.
We need some thing similar to proc or PL/SQL block(declare begin..... end)
i've a problem in using store procedure. My code is to get postcode id when i pass a postcode. First it will check the postcode that i pass if already exist it will get postcode id but if not it will insert new postcode and get a new postcode id created then pass into ASP system. When i try run this stock procedure i got error as below :-
SQL> exec INSERT_PCODE_GMDS
BEGIN INSERT_PCODE_GMDS; END;
*
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'INSERT_PCODE_GMDS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
(
Postcode1 IN varchar2,
citiID IN Number,
county_ID IN number,
city_name IN varchar2,
sub_cityID IN number,
pcode OUT number
)
[code].......
in ASP to pass and get back the values i used code as below. but i think the problems occurs in my stock procedure
set cmd=Server.CreateObject("ADODB.Command")
cmd.ActiveConnection = OBJdbConnection
cmd.CommandText="INSERT_PCODE_GMDS"
cmd.CommandType= 4
cmd.Parameters.append cmd.CreateParameter("@poskod",adVarChar,adParamInput,5,poskod)
[code].......
CREATE OR replace PROCEDURE T_name_column
AS
file_handle utl_file.file_type;
BEGIN
[Code]....
I am very new to oracle and SQL.I am trying to create a store proc that will copy 14 day of data into a table and then truncate the original table. When i compile following code....
CREATE OR REPLACE PROCEDURE STOPROC_TRUNCATE
( dateNum IN NUMBER )
IS
BEGIN
create table AUDIT_14Days as select * from AUDIT where TIMESTAMP >= (SYSDATE - dateNum);
truncate table AUDIT drop storage;
[code]....
how to write this query using procedure and how it can display.
SELECT iusr_id,
so_curr_assign_to,
comp_id,
[Code]....
I have to write a proc to display data based on user input for t_grp, and it should exclude grp0
So below is the proc I have written, and I want to display the report for all t_grp when user gives user_input as All or gives null. How can I acheieve this is in procedure.
table: target_data
create table target_data
(
t_mon varcahr2(6)
, t_grp varchar2(30)
, t_data varchar2(50)
)
;
INSERT INTO target_data VALUES ('Apr-11', 'grp1', 'some_data');
INSERT INTO target_data VALUES ('Apr-11', 'grp2', 'some_data');
INSERT INTO target_data VALUES ('Apr-11', 'grp4', 'some_data');
[code]......
Now the above proc is running fine, if I give the input as grp1 or any other t_grp.
I've created one procedure with following code.
PROCEDURE MaxNo IS
A Number;
BEGIN
Select Max(Supplier_ID)+1 into A from supplier ;
END;
SQL> Select Max(Supplier_ID)+1 from supplier;
MAX(SUPPLIER_ID)+1
------------------
6
when I execute it in a SQL PLus
SQL> SET SERVEROUTPUT ON
SQL> exec MaxNo;
PL/SQL procedure successfully completed.
I have a requirement when i will pass the table name as a parameter in the procedure then the series of stametmemt is performed on the table whose name has been passed.
code look like below
PROCEDURE PROC_CREATE_PARTITION(TABLE_NAME IN VARCHAR2,SCHEMA_NAME IN VARCHAR2)
AS
V_PART_NM VARCHAR2(20);
V_PART_CNT NUMBER;
V_DATE DATE;
V_SCHEMA_NAME VARCHAR(15);
V_TABLE_NAME VARCHAR2(30);
[code]....
I am getting a error PL/SQL: ORA-00933: SQL command not properly ended
this error is show in the first select statement line where i have used the variable in the from list of table.