I have an Index in User1 schema. can i grant access on this Index to User2. if so, what privs i can give..?
for proc's we will give "Grant Execute on proce1 to User2". Like this how on Indexes..
I have 2 users in my oracle DB. They both have very different privileges and they both have too many different privileges. Now I want to grant user 1 the same privilege that user2 has while user1 keeps his existing privilege. How can this be done without manually comparing their difference and manually grant user 1 each privilege that he doesn't have? Or second option, can I override user 1's privilege with user 2's privileges?
View 2 Replies View RelatedLet's consider such table that all rows fit into single block:
SQL> create table test as select rownum id, '$'||rownum name from dual connect by level <= 530;
Table created.
SQL> create index i_test on test(id);
Index created.
SQL>
SQL> begin
[code].....
why does approach with full scan take longer even if table occupies only one data block? PS. 11gR2
I have a schema TEST1 and it has a view 'TEST_VIEW'. I granted read only permission on the view to TEST2 schema. grant select on TEST_VIEW to TEST2.
But TEST2 is used by an application which requires to read view metadata and then sync with application afterwords start reading. Is there any special permission to grant to access metadata of the view / table.
I have a role in my Oracle 10g instance like below:
GRANT ALTER USER TO <role_name> WITH ADMIN OPTION;
And this works fine for any user who has:
GRANT <role_name> TO <user>;
What I need is to limit <user> to only have the ALTER USER privilege to a set of users. Preferrably where the set of users are identified by a column value in a table, something like:
WHERE PeopleTable.InList = "YES"
Or maybe where set of users are defined by their membership in another role.
GRANT ALTER USER TO <role_name> FOR USERS IN MEMBERS_LIST_ROLE;
I've a query like
update tab1
set col1 = ( select col2 from
tab2
where tab1.id = tab2.id) table 1 has arnd 10,000 rows
table 2 has arnd 1,700,000 rows and has a primary key on column id.This query is taking around 20 secs to execute. I checked the x-plan and most of time taken for table access by index rowid.I checked the stats for the tab2, its just three days old.
I would like to know what happens when we fire:
grant all on any table to user_name;
and
grant all on table_name to user_name;
Actually I was performing "grant all on table_name to user_name;" to grant the privilege but 1 of my friends suggested "grant all on any table to user_name;"
Consider following scenario
Schema Update Privilege on emp directly
User1 Yes
User2 No
I have created a package named pack in user1 schema which contains one procedure which updates table emp. ow i executed the following in schema user1
Grant execute on pack to user2;
I connected as user2 and executed
Create Synonym pack for user1.pack;
Note that user2 doesn't have update privileges on table emp
Tell me whether user2 can update emp through package pack
I have created a user "user1" who has dba role.i wanted to create a another user "user2" with same privileges which user1 has. so i granted dba role to user2 but i dont want user2 to have "drop" privilege on any objects except his own objects.
View 1 Replies View RelatedWhen I invoke SOAP Web-Service using APEX_WEB_SERVICE.MAKE_REQUEST, then I'm able to get response from web-service. However all German character are replaced by JUNK data. However data is coming fine when I test web-services using SOAP UI.
I tried to invoke web-service using UTL_HTTP. However when I use UTL_HTTP, then I'm getting following error.
ORA-24247: network access denied by access control list
<li> Why German characters are replaced by Junk data while invoking web-service from APEX, while it's working fine from SOAP UI
<li> When I can access web-service successfully using APEX_WEB_SERVICE, then why it's throwing ORA-24247 error when I call using UTL_HTTP?
DB: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
APEX: 4.0.2.00.07
Web-Server: EPG
SELECT * FROM NLS_DATABASE_PARAMETERS;
[code]...
I am having oracle database version 11.2.0.3.0 standard edition, where one of my users requirement is that he wanted to send mails from oracle database but he is getting below error
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at "HF_REPORTING.SEND_MAIL", line 12
ORA-06512: at line 18
is it possible to send mails from oracle database in STANDARD Edition?
While Running the proc,it's raising the below error.
Error report:
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 246
ORA-06512: at "SYS.UTL_SMTP", line 115
ORA-06512: at "SYS.UTL_SMTP", line 138
ORA-06512: at "LISTER_SHIFT.SOLN_GENERIC_SENDMAIL", line 33
ORA-06512: at line 1
[code]....
I am on 11.2.0.3 Enterprise Edition. We are using the new feature "Composite Domain Index" for a Domain index on a very large table (>250.000.000 rows). It really works with mixed queries. We added two number columns using FILTER BY.We have lots of DML on this table. Therefore, we are executing synchronize and optimize once the week. The synch behaves pretty normal. But "optimize_index" takes a very very long time to complete. I have switsched on 'logging' for the optimize process. The $I table takes some time but is finished normally. But the optimization of the $S table (that is the table created for the CDI feature) is running over 12 hours now - and far from being finished. From the logfile, I can see that it optimizes 1000 rows every 20 minutes. Here is the output of the logfile:
Oracle Text, 11.2.0.3.0
14:33:05 06/26/12 begin logging
14:33:05 06/26/12 event
14:33:05 06/26/12 process $N for optimize: SEQDEV.GEN_GES_DESCRIPTION_CTX_I
14:33:16 06/26/12
14:33:16 06/26/12
[code]....
I haven't found a recommendation from Oracle not to use "optimize_index" for Domain Indexes with CDI. But in my case, it would be much faster just to drop and recreate the Domain Index in question.
I have a huge table (about 60 gb) partition over range. The index on this table is global index created on 4 columns together. I have a query which is running very slowly. The explain plan is showing the use of this global index.Explain plan is not showing pstart and pend because the index is global.
View 6 Replies View RelatedI have a global index and I want to convert it to local index.Is there a way to recreate local index with out dropping the global index.
I can create a local index first and then drop the global index. But is there a way to create it with out dropping the global index, just convert it.
I am facing the error "ORA-01502: index or partition of such index is in unusable state " while loading the text data using
sql loader with direct path (direct = Y ,rows = 10000) option. Table consists an composite non unique index. If I query the dba indexes for the effected index it shows the index status as VALID. There was no maintaince done on the effected table or index. I have tried loading the same data using conventional path but didn't found any issues for the same.
I have a query which had a join:
a.c1=b.c1 and a.c2=@var
where @var is user supplied input at runtime...We had a index on a.c2 . The CBO would use this index to generate an opitimised query plan.We found some records from table "b" were dropping due to inner join. So we made a change in join. It'd be like
a.c1(+)=b.c1 and nvl(a.c2,@var)=@var
This query is no longer using the index, instead its doing a full table scan causing the query to slowdown.I have tried creating index on nvl(a.c2,'31-dec-9999')
But the CBO won't use it.Anyway to create index on this col so that full table scan can be avoided?
How to force an index if the table not using the index?
View 10 Replies View RelatedWe have occurrences of enq : TX - index contentions in the database. Using the SQL ID, we have identified the INSERT statement and the table which they are trying to insert.
This table has almost 25 different indexes, some of which are unique as well.I am wondering how to identify the actual index causing issue, out of these 25 indexes.
Is there any way to pin point to the name of index which is causing the lock?My plan is, once the index is identified, I would like to check the extents and inittrans and other attributes of this index to fix.
Can we create non-cluster index on a clustered index?
View 5 Replies View Related wanted to grant dbms_scheduler permission to the system user in oracle 11.2.0.3,but it is showing insufficient privileges, but my System has Sysdba rights.
SQL> SELECT * FROM v$pwfile_users WHERE sysdba='TRUE';
USERNAME SYSDB SYSOP SYSAS
------------------------------ ----- ----- -----
SYS TRUE TRUE FALSE
[code]....
Revoke succeeded.
SQL> conn system
Enter password:
Connected.
[code]...
while i ran this query
"
SQL> select * from session_privs;"
for system user i have 202 rows of different privileges,but the same query for sysdba has 208 rows...
I want sql querys for following scenarios
Owner of the compant wants to create 5 users,3 in following fashion
1) 2 -Must have authority of admin
2) 2- Normal user
3) 1 - User whose password is blocked for 15 days
I have a stored procedure which when executed creates a user and grants some roles to the user and also makes certain roles DEFAULT using "alter user"
The issue comes when i execute the procedure.
I have a User who has a role and this role has the "alter user" privilege, for example lets say that the user1 has the role ABC, and role ABC has the "alter user" privilege.
SQL> grant alter user to ABC;
Grant succeeded.
SQL> grant ABC to user1;
Grant succeeded.
Now, when i run the stored procedure as the user1, it gives me an error on a line saying "insufficient privileges", when i check the line, its this line:
alter user user1 DEFAULT ROLE "ROLE1", "ROLE2"
But as far as i know the user1 has the "alter user" privilege
I want to make those two roles ROLE1, ROLE2 DEFAULT because i don't want the other roles ROLE3,ROLE4 to be default, as you know if there are many roles and if we alter user with default for certain roles other roles become DEFAULT=NO.
So i get the error at "alter user" statement though the user has the "alter user" privilege, what do you think might be wrong?
OR is there anyway to grant roles to the user with default=NO option?
Say we have db1 and db2 two databases installed on two different servers.For internal needs, I have to insert some data from a table t1 on db1 to a table t2 in db2. This can be done by issuing from a user on db1 :
insert into t2@dblink2
select *
from t1;
where dblink2 is a correct database link that points to u2 (the t2 owner for example) on db2.
Now what I want to do is to grant privileges remotely.Is there a way to issue somthing like
execute@dblink2 'grant select on t2 to public';
It would be like u2 has issued the statment...
I don't want to use OS scripts (.sh or .bat).
if a user have alter table gant but could not alter .. what additional grant it need
SQL> alter table HRS_PERS_FIELDS_INC modify(PER0000252 NUMBER(19,3));
alter table HRS_PERS_FIELDS_INC modify(PER0000252 NUMBER(19,3))
*
ERROR at line 1:
ORA-00942: table or view does not exist
I logged in as system and I just execute below script, however Im getting error "SQL Error: ORA-00942: table or view does not exist 00942. 00000 - "table or view does not exist""
GRANT execute ON UTL_FILE TO USER1;
How to grant privilege on ult_file?
Is there a way to find out who and how was the GRANT permission revoked from user.Why i am asking is , i see a grant permission exist for a user and has been revoked later.
View 13 Replies View RelatedI created a user and granted connect,resource priviliges. I gave access to this user for only 5 tables. when i check it later, other tables are also given access. How can i avoid this and give access to selected tables.
View 9 Replies View RelatedOracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
Is there a way to grant EXECUTE on a group of procedures/functions/packages to a particular role , in a single statement ? Or we have to do it one by one... like
GRANT EXECUTE on event_main to role1,
GRANT EXECUTE on event_main2 to role1,
GRANT EXECUTE on event_main3 to role1,
I have two user a and b. I have to Grant select update insert Delete Permission to all tables of user b To User a. how can it possible?
View 5 Replies View Related