I renamed 100 tables and recreated them, now I need to copy supplemental login information from renamed table to new tables. Environment is oracle 10G.
OS - Solaris
I am trying to recreate a table after I have renamed the original.
DECLARE
v_prd_detail_seq NUMBER;
v_orig_ddl CLOB;
[Code].....
I want to enable unconditional table level supplemental logging on unique index columns.
But Alter table tablename add supplemental log data (unique index) columns always;
gives error.If i omit always it is accepting but while it unconditionally log the unique index columns.
I just want to know the user login / log out information for the past 31days. how can i get that?
View 11 Replies View RelatedI am trying to get information about the columns of tables in Oracle databases. In MySQL, show columns provides good deal of information.But in Oracle, we do not have such equivalent call."describe" shows only the primary key.
But it does not show whether any column has unique constraint or an index.
I created a column in a table with unique constraint (but not a primary key), but it was not listed with CONSTRAINT_TYPE = 'U' in dba_constraints view, but was listed with CONSTRAINT_TYPE = 'C' - Check constraint.
it's possible to retrieve the names of tables that contain similar information in an oracle database.
View 7 Replies View Related consider the following
WITH table1 AS
(
SELECT 345 id, To_Date('1/31/2010', 'mm/dd/yyyy') dt, 123 cid, 'test' txt FROM dual UNION ALL
SELECT 345 id, To_Date('2/1/2010', 'mm/dd/yyyy') dt, 121 cid, 'test2' txt FROM dual UNION ALL
SELECT 345 id, To_Date('2/2/2010', 'mm/dd/yyyy') dt, 112 cid, 'test3' txt FROM dual UNION ALL
SELECT 345 id, To_Date('2/3/2010', 'mm/dd/yyyy') dt, 162 cid, 'test4' txt FROM dual UNION ALL
[code]..
i want to output the following:
{code}
IDDT CIDTXT
3451/31/2010123test6
3452/1/2010121test2
3452/2/2010112test3
[code]....
as you can see, i want to join both tables (table1 and ov_dates) and take dt from ov_dates table look it up in table1 and thengrap ov_dt and looking up in table1 and copy values of one row to the other.
for example, in ov_dates i have 3/31 dt and 4/7 ov dt. i will look for 3/31 and 4/7 row in table 1 and copy columns values from 4/7 to 3/31you can see that cid for 3/31 stay the same (since i dont want to replace the value) but txt value was replace with value from 4/7
another examplein ov_dates we have 1/31 dt and 2/5. so i go into table1 get 1/31 and 2/5 row and copy values from 2/5 into 1/31/ as you can see the txt column value for 1/31 becametest6 since it was taking from 2/5. the same thing for the rest ofdata
im using in oracle program navicat for tables and query. but now i have a problem how copy tables and querys from client to server.
View 1 Replies View RelatedI'm trying to copy a particular set of rows into two tables. I want to change one varchar column to a different string in one of the tables, and create a new unique ID for the copied rows that will match on both tables. I also want that new unique ID to be one digit higer than the current highest unique ID being used across the tables as a whole.
create table testing_query_dtl
(query_is number not null, query_type varchar2(20) not null, area_code varchar(4), stn_code varchar2(3))
create table testing_query_hdr
(user_name varchar2(30) not null, query_indicator varchar2(1) not null
, query_created date not null,
query_last_used date not null,
query_name varchar2(40) not null
, query_is number not null)
[code]...
I then used 'mymax+test_seq.nextval' but that won't avoid the unique constraint issue on the table testing_query_hdr and on the table testing_ query_ dtl increments the ID on EVERY row even when I don't want it to.
we use Oracle11gR2 on Win2008R2 .By erroneous operation of OracleDB, there was trouble that we could not log in to Application(Oracle Insight) running on Oracle11gR2. I looked up and understand by running the below ALTER DATABASE ADD SUPPLEMENTAL LOG DATA we can find the SQL statement that was executed in the past from SQL_REDO column of V$ LOGMNR_CONTENTS table, undo SQL statement to rollback from SQL_UNDO column of V$ LOGMNR_CONTENTS table. But , we are concerned about the adverse effect of enabling the supplemental log because it is production environment . I heard the contents of the REDO log will increase if we enable supplemental log.
Q1-How much the REDO log would increase roughly if you enable supplemental log ? ( I am concerned about the issue of the capacity of the REDO log and the problem of DB performance . )
Q2-Is it necessary to restart the DB instance to enable supplemental logging after executing the below ?ALTER DATABASE ADD SUPPLEMENTAL LOG DATA.
Q3-Is there any other adverse effect we should care if you enable supplemental log ?
Q4-Logminer is usable if DB is running on no-archive mode ? In my understanding , it is possible if you enable supplemental log and have the REDO logs we would like to analyze.
I am having two tables
Table 1 having 16 cror rows .
Table 2 having 1000 rows
I joined both the tables and fetch all inforamtion from big table for those key present in small table.Join query taking more time to fetch the rows .
How to know weather table is partitioned or not ? Is there any data dictionary view to know the information about the Partitioned type,keys on table ?
View 4 Replies View Relatedadjusting a query. I have a table which looks like this:
CREATE TABLE PF.PF_ANOMALIES
(
ID VARCHAR2(10 BYTE) NOT NULL,
PLAN_ID VARCHAR2(10 BYTE),
CLIENT_ID VARCHAR2(10 BYTE),
SEDOL_CODE VARCHAR2(7 BYTE),
LTY_ID VARCHAR2(10 BYTE),
[Code]....
I have the following query that will return me the anomalies of client transactions (based on joining other tables for extra info too)
SELECT pc.client_id,
pc.client_name,
NVL(pa.sedol_code, 'N/A'),
DECODE(ps.stock_name, NULL,
DECODE(plt.lty_name, NULL, 'N/A', UPPER(plt.lty_name) || ' LEDGER - ' || pa.orig_price_ccy),
[Code]....
-- Get cash anomalies on top as these will have 'N/A' sedols I have another temp table that also gets populated with anomalies:
CREATE GLOBAL TEMPORARY TABLE PF.PF_ANOMALIES_TMP
(
ID VARCHAR2(10 BYTE) NOT NULL,
FVD_TYPE VARCHAR2(10 BYTE) NOT NULL,
CLIENT_ID VARCHAR2(10 BYTE),
SEDOL_CODE VARCHAR2(7 BYTE),
[Code]..
My problem is that I also want my query to return rows from this tmp table too.
We are running Oracle 10g. I need to pull the DDL information from our Oracle tables. The following SQL statement returns the result as a "HUGECLOB". Is there a way to convert the result to text in varchar2 data type? Since tables being processed have numerous partitions, the DDL information for them is quite large, therefore, using substring would not be a viable alternative.
[code]select DBMS_METADATA.GET_DDL('TABLE','EMPLOYEE') from DUAL; [/code]
I know that you can view all constraints in a table using $USER_CONSTRAINTS or $USER_INDEXES view. What i find difficult is that the information in those views is not really well presented.
I find it very hard to follow. For example, just to find out which columns are foreign keys and which tables they refer to is really tedious. Is there a simpler way to view all the constraints especially foreign keys of a table and including which table columns they refer to in the child table.
I like to see a diagramatic representaion of all the tables involved so i like to see both the parent and the child tables, which columns are related and using which FKs etc. is there an easier way to view this information?
I have a SQL Loader Log File Output. I would like to delete Table Information from the output file.Following is my code.
//PATH OPENED AS TEXT BY STREAM READER
System.IO.StreamReader strm = File.OpenText(batchFileName);
//OUTPUT
[Code]....
I am trying to understand how to enable some audit so we can capture OEM logins as well.
Here is my setup. Lets say my DB that i am auditing is called audit_db (audit trail set to DB) sitting on host called host_db. and we have grid control agent on this box.now my grid control is as this. Lets say my OMS and repository is on host called OMS_host.
we run query aginst dba_audit_session to get info as to who tried failed login attemps and stuff.
Now to the part that is not working.
-- this is the good part When i intentionaly login to the audit_db with sqlplus client from my laptop with wrong username/password that is captured. we get the username,os_username,userhost,terminal.
here is the sample output
username is the wrong user that i tried to login as
os_username is the my local username(ad account)
userhost is my_laptop_name
terminal is laptop_name
from above we can figure who was trying to login(failed).
-- this is the bad part But lets say i try to login to audit_db through grid control and use wrong username/password.that gets captured too(but not all of it). we get the username,os_username,userhost,terminal.
here is the sample output
username is the wrong user that i tried to login as
os_username is the user of OMS repository db(oracle)
userhost is oms_host
terminal is unknown
Now with the above info, we cannot figure out who tried to login with bad login credential.
i could copy data from tableA to tableB with the scenario below
1) Currently we have no unique key / primary key defined on both of this tables, due to the nature of data, so insert/update will not work
2) We cant truncate/insert as user will be accessing this tables when the copying process takes place, so we dont want to end up having a scenario where the table does not contain data at a certain time
Will materialize view full refresh work in refreshing a table so we could avoid the problem faced in point 1 & 2.
I have two tables namely PERSON and WIFE. I want to make WIFE's data available in PERSON table while keeping entries of WIFE maintained and at the same time adding some the values of PERSON against the data of wife.
PERSON Table
PK NAME ADDRESS IS_MARRIED
1 John ab city Y
2 Varvatos cd town N
3 Smith ef town Y
4 Henry gh city Y
5 Lynda gh city Y
WIFE table
PK PERSON_ID (FK) NAME
1 1 Alice
2 3 Rosy
3 4 Lynda
Now i want to copy data of WIFE table into PERSON table like this PERSON table
PK NAME ADDRESS IS_MARRIED
1 John ab city Y
2 Varvatos cd town N
3 Smith ef town Y
4 Henry gh city Y
5 Lynda gh city Y
6 Alice ab city Y
7 Rosy ef town Y
As in the given example you might have noticed that ADDRESS of wife is same as of her spouse and same goes for IS_MARRIED column. Moreover, the PK is also not duplicated. How to go about this?
Another important factor is Lynda already exits in PERSON table, therefore, i certainly don't want to duplicate her entry.
Is it possible to copy a value in a column from a table into another column in another table using the select statement.
Example: I want to copy the arrival date from the guest table to date_charge in the charges table.
CREATE TABLE GUEST
(ROOM_NUMBER VARCHAR2(2),
DATE_ARRIVAL DATE DEFAULT SYSDATE NOT NULL);
CREATE TABLE CHARGES
(ROOM_NUMBER VARCHAR2(2),
DATE_CHARGE DATE default Sysdate);
[code]....
1. I am inserting a value to a table.through uploading the csv file to the DB table using apex.
2. After the data get inserted into the table(parent),my data should be copied to the another table with some conditions .
3. Is it possible to write a trigger to insert statement from selecting the values from another table.
How can i copy a single column from one table to another. Table 1 has a column with data in it, table 2 has the column but is empty, i want to copy data for a single column from table1 to table 2. By the way these table have multiple columns.
View 8 Replies View Relatedhow to copy data and constraints from one table to another table
View 8 Replies View RelatedI must admit my "google skills" have failed me and it is possible that I might be missing something obvious here but allow me to explain.
If I have a table that is populated/accessed by a typical OLTP application such that over time the data in the table may become "fragmented".
I know that is a very controversial term I used but that is not the question here. A simple way to describe the state of the table might be that the table has always been populated with lots of small INSERTs, modified with lots of small UPDATEs and data has been deleted in small DELETEs.
This has meant that the data is neither closely stored in data blocks nor is in any particular order (so there are some empty blocks under HWM).
Now my question is how do I create exact copy of this table and its indexes AS THEY EXIST AT THE MOMENT that includes
1) its data
2) its constraints/indexes etc.
3) its storage parameters
4) data stored in EXACTLY same manner as in original table.
To avoid complications, the table in question is just a normal heap table without any partitioning involved. While
CREATE TABLE AS SELECT (or CREATE TABLE followed by INSERT) will take care of points (1) to (3) above, it will not achieve point (4) above.
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
BEGIN DBMS_LOGSTDBY.BUILD; END;
*
ERROR at line 1:
ORA-01354: Supplemental log data must be added to run this command
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
[code]....
i have a table COLOR having alphanumeric fields i.e Color Description & Color Ref. i want to copy the values from Color Description to Color Ref.
what will the select statement for this?
Triggers for oracle database. What I am trying to do is copy original data from one table to another table prior to an update, insert, or delete occurring. Basically we are trying to keep a transactional history, with out having to restore the data. Here is what I have created to date, however it is not executing consistently.
CREATE OR REPLACE TRIGGER DATA_COPY BEFORE
INSERT
OR DELETE
OR UPDATE ON "DB1"."TABLE_1"
[code].......
I have 2 tables with same no of column and range partition based on date.At the end of month i want to copy the data of one table to another table.Instead of copy the data i want to copy the data of one partition completely to another table partition ..
View 2 Replies View RelatedIn MS Windows, if I copy a file and paste it into the same folder, I get a copy with the text 'Copy of' in front of the file name. If I paste it again, I get another copy with a different version number.
E.g.
sqlnet.log
Copy of sqlnet.log
Copy (1) of sqlnet.log
Copy (2) of sqlnet.log
I was wondering if I could copy existing rows into a table and do the same thing?
So, for example if I had this table:
create table tst_srch (srch_is varchar(100), user_name varchar(100), srch_name varchar(100));
insert into tst_srch values (1,'USER1','SRCHA');
insert into tst_srch values (2,'USER1','SRCHB');
insert into tst_srch values (3,'USER1','SRCHC');
insert into tst_srch values (4,'USER1','SRCHD');
insert into tst_srch values (5,'USER2','SRCHC');
insert into tst_srch values (6,'USER2','SRCHD');
insert into tst_srch values (7,'USER2','SRCHD_1');
Could I write a procedure like copy_searches('USER1','USER2') that would copy all USER1's searches to USER2 - including renaming any duplicates.
So it would create these new rows:
8,USER2,SRCHA
9,USER2,SRCHB
10,USER2,SRCHC_1
11,USER2,SRCHD_2
I've looked at various insert statements, merge and match statements and exception handling in procedures .
how to copy tables from one user to another user using pl/sql
View 18 Replies View Related