I have table property and flat , in both of these tables I have cvp_id common colomn .Now I want to add cluster on this colomn so how can I add cluster to table which is already exists.
View 3 Repliesdeclare
vnum number;
vname varchar2(50):='t1';
begin
begin
select count(*) into vnum from dba_tables where table_name=vname;
dbms_output.put_line('table count '||vnum);
exception
when others then
vnum := 0;
end;
begin
if vnum>0 then
execute immediate 'drop table '||vname;
dbms_output.put_line('table dropped');
end if;
exception
when others then
dbms_output.put_line('table does not exists');
end;
execute immediate 'create table '||vname ||' ( n number)';
dbms_output.put_line('table created');
end;
During the database installation the two nodes after all the prerequisite check and copy of files i am getting the below error message
"Template4 General_Purpose.dbc does not exist. Please specify an existing template for database creation".
How can i overcome this error ? I am installing Oracle 11g R2 11.2.0 On Oracle Enterprise Linux (5.1.19) running on [Oracle Virtual Box 4.1.12 ]. Also what are the steps to uninstall the previously installed db_home1 which failed due to this error.
current environment
Oracle VM 2 Node RAC cluster
Oracle 11G 11.2.0.3.0
Oracle 11g rel 2 GI
on current 2 node cluster we have GI and RAC db configured Nodes: vmorarac1,vmorarac2
we shutdown vmorarac1 to clone it to vmorarac5
on new node I have changed the hostname to vmorarac5 In /etc/sysconfig/network-scripts/ifcfg-eth0 change ip to new ip and same for /etc/sysconfig/network-scripts/ifcfg-eth1 152.144.199.210,152.144.199.211
mad echanges to /etc/hosts on vmorarac1/2 for 2 new IP address assigned to vmorarac5
152.144.199.171 vmorarac1.pbi.global.pvt vmorarac1
192.168.2.30 vmorarac1-priv.pbi.global.pvt vmorarac1-priv
152.144.199.184 vmorarac1-vip.pbi.global.pvt vmorarac1-vip
[Code]....
Query is is that all ok to reboot the new node to reflect changes as below and change the hostname to vmorarac2
152.144.199.210 vmorarac2.pbi.global.pvt vmorarac2
192.168.2.32 vmorarac2-priv.pbi.global.pvt vmorarac2-priv
152.144.199.211 vmorarac2-vip.pbi.global.pvt vmorarac2-vip
hostname change in /etc/sysconfig/network
On new node vmorarac5, there is alreay software for RAC DB and GUI cloned from vmorarac1
addnode.sh is used to add existing node, but as part of pre-requisite configuratoin is there any config step missing
I'm trying to add the third node to my existing two node cluster. In fact i succeded adding the node but i have the following problem:
-when i start node 1 and 2, everything is ok, but on node 3 startup one of the other nodes fails
-this happens in any combination: start 1 and 3, everything is ok. when i start node 2, node 3 fails
The asm configuration (disks, permissions, etc) is the same on all three nodes.find below the asm and crsd log details from the failure time:
alert_ASM.log
NOTE: enlarging ACD for group 1/0x124851d1 (DATA)
WARNNING: cache read a corrupted block group=DATA dsk=4 blk=1 from disk 4
+NOTE: a corrupted block from group DATA was dumped to /u01/app/oracle/diag/asm/+asm/+ASM3/trace/+ASM3_rbal_4109.trc+
WARNNING: cache read(retry) a corrupted block group=DATA dsk=4 blk=1 from disk 4
[code]...
I have one table called posh, which has about 50,000 ids (millions of rows) so far. It is currently at about 50 gb. So each series of rows for a particular id is about 1 mb.
CREATE CLUSTER posh_cluster (id int)
SIZE 2M
STORAGE (initial 2000K next 2000K)
PARALLEL 4;
CREATE INDEX posh_cluster_index ON CLUSTER posh_cluster;
[code].......
According to the Oracle documentation size is "the average cluster key size", I am not really sure what that means. Is this the 1mb in posh table space I am using for each series of rows for an id, or the space used for the index? Secondly, the storage parameter for 'CREATE CLUSTER' should be what?
Difference between Normal Index on Table and Cluster Index on Table?
View -1 Replies View RelatedDuring ASM Disk Groups creation after the ASM instance creation, receive the following error: Disk Group ORAASMGROUP2 already exists. Cannot be created again
The Grid infrastructure was deinstall one time and still the same issue.
I have two tables having same name in two different databases.i have to create a new table with these two tables in a new database.
But if one table have 2 columns and another table having three columns I have to create a new table with three columns..
i had small query on external tables. i had (.csv) file outside the database. In this file, one column will be added monthly. i need to create the external table dynamically by adding the column for every month.
How the procedure can be created for this requirement.
I am creating a table from another existing table in another schema. The existing table contains data. When I am using the query- create table m _voucher as select * from ipm.m_voucher,I am getting the whole data of m_voucher but I want empty m_voucher table, so what will be the query to get the empty m_voucher table?
View 4 Replies View RelatedI want to create temp table, for this i am using:
CODEcreate global temporary table help_temp
as
select * from help;
but this is creating only the table structure, not copying the table data.
I created a table but I want to add the Unique check to it as I forgot to apply it to the table when I created it.Is it possible to make the field Unique after having created the table or do I have to drop the table and re-create it?
View 3 Replies View Relatedi am trying to create table inside function where in after creating table when am trying to access the table with select statement oracle is throwing error 'Table/view doesnot exist -00942', below is the code snippet
create or replace function example (mkey in varchar2) return varchar2
is
g_key varchar2(100);
l_tbl_ntext exception;
pragma exception_init(l_tbl_ntext , -942);
begin
begin
execute immediate 'select * from example1';
exception
when l_tbl_ntext then
null;
end;
execute immediate 'create table example1(skey varchar2, g_key varchar2) storage(buffer_pool, keep)';
end example;
/
select * from example;
the relationship on my script.What I want to do is make it possible to assign many courses to a student.But I have read a few books on foreign keys and primary keys, and I still dont get how to go on doing this....
This is how the table creation with the keys looks right now...
CREATE TABLE CAMPUS (
CAMPUSID NUMBER(4) NOT NULL,
NAME VARCHAR2(80) NOT NULL,
CONSTRAINT CAMPUS_PK PRIMARY KEY (CAMPUSID));
[code]...
I need to create a temp table within a stored procedure. I want to apply some logic on the table, and then delete it when it is completed in runtime -- all inside the stored procedure.
View 13 Replies View RelatedI have a requirement to create the table monthly.The tablename will be the o/p of the following select query.
select 'TBR_AND_SECURITY_DEPOSIT'||TO_CHAR(sysdate, 'Monyy') from dual
I am trying to create the table for creating the backup of the existing table TBR_AND_SECURITY_DEPOSIT.
create table (select 'TBR_AND_SECURITY_DEPOSIT'||TO_CHAR(sysdate, 'Monyy') from dual) select * from TBR_AND_SECURITY_DEPOSIT
but it is throwing error as invalid table name.
I want to create a table, whose first column , patient_id, should be a sequence.
View 9 Replies View Relatedis it Possible to Assign the Sequence Name During the Table Creation.
View 1 Replies View RelatedI am getting compilation error when create nested table type depend on table structure
SQL> CREATE OR REPLACE TYPE typ$nttb$1 IS TABLE OF emp%rowtype
2 ;
3 /
Warning: Type created with compilation errors.
SQL> show error
Errors for TYPE TYP$NTTB$1:
LINE/COL ERROR
-------- -----------------------------------------------------------------
0/0 PL/SQL: Compilation unit analysis terminated
1/29 PLS-00329: schema-level type has illegal reference to SCOTT.EMP
SQL>
Facts:
Oracle 10.1.0.5
AIX 5.3
My table, HMTX have 10 partitions each of one have 6 millions of rows (average). We have 7 partitioned LOCAL indexes in that table.
Every month we load data into a new partition (6 million of rows aprox) and drop the oldest partition in table HMTX.
In order to do that we have a script that contain the next statements:
drop of all indexes
drop index n1;
drop index n...;
drop index n7;
[Code]...
create indexes again with tha same storage and degree parameters
CREATE INDEX hmtx_TST_N1 ON hmtx (campo1, campo2, campo3 .... campo8)
TABLESPACE xxxx
PCTFREE 0
INITRANS 2
[Code]....
My problem is in rhe index creation section, despite use parallel with degree 8 and nologging the index was created in :
Elapsed: 02:43:50.85.
In past months that index was created in :
Elapsed: 01:43:36.94
Elapsed: 04:48:31.24
Elapsed: 00:57:16.28
there are another way in order speed the index creation ?? o another way to disable ths index ??
How to add ROWDEPENDENCIES in an existing table. I mean How to Alter any table to add ROWDEPENDENCIES..
View 2 Replies View RelatedWe have a transaction table and has 30 million rows. The table is not partitioned till date. We need to create partition on this table. We had an idea of moving this data to a temporary table and create partition[range]on the original table and move the data back.
View 5 Replies View RelatedI want to either UPDATE or add a new column with ROWNUMBER() OVER an column on a table
the output will shows like below
empID DeptNo New_column Start_Date
11 7778 1 01-02-2010
11 3400 202-06-2010
25 4444 103-02-2010
25 7775 204-07-2011
25 7777 305-02-2012
30 2223 109-02-2012
the forth one column is in date format and I want to update table with respect to order by the column start_date
I have 2 tables , which can be mapped with a common column and the second table's rest of the columns should become like columns(like pivot) and in the second table itself 1 more column called value , this sum of the value becomes a value to the pivot column value. For this I am using CASE structure and I am writing the individual case for each column , but I am sure after some extent case don't work at all and I would like to do it dynamically( when ever the new entry will come into the source table , my proc has to pick automatically the new value and put the new value as part of pivot structure) , so pls share your inputs and if possible provide some sample code.
View 3 Replies View RelatedCheck table creation script
CREATE TABLE "SCOTT"."TEST_USER"
("TX_SID" VARCHAR2(30 BYTE) NOT NULL ENABLE,
"TX_FIRST_NAME" VARCHAR2(30 BYTE) NOT NULL ENABLE,
"TX_LAST_NAME" VARCHAR2(30 BYTE) NOT NULL ENABLE,
[code]...
Here i'm loading data into these three tables through sql loader. Here is the control file
OPTIONS (SKIP=1,ROWS=5)
LOAD DATA
INFILE 'C:SQL LOADER DEMO estuser_data_lat.csv'
INTO TABLE TEST_USER
[code]...
Here are the two function which i'm calling from sql loader control file
CREATE OR REPLACE FUNCTION get_role_id(p_role_name VARCHAR2)
RETURN NUMBER IS
lv_role_id NUMBER;
BEGIN
[code]..
i'hv attached the testuser_data_lat.csv file, which is the data file.Command line
C:SQL LOADER DEMO>SQLLDR scott/sc CONTROL=rd_users_control.ctl
Now let me tell u what is happening Whem i'm running the above sqlldr, log is generating saying
Record 1: Rejected - Error on table TEST_ROLE, column ID_ROLE.
ORA-01400: cannot insert NULL into ("SCOTT"."TEST_ROLE"."ID_ROLE")
Record 2: Rejected - Error on table TEST_ROLE, column ID_ROLE.
ORA-01400: cannot insert NULL into ("SCOTT"."TEST_ROLE"."ID_ROLE")
[code]...
But when i remove
INTO TABLE TEST_ROLE(
TX_SID POSITION(1:3) CHAR,
ID_ROLE "get_role_id(:ROLE_NAME)" ,
TX_CREATED_BY CONSTANT "SYSTEM",
[code]...
from Control file, data is getting popupalated in TEST_USER and TEST_TITLE similarly if remove
INTO TABLE TEST_TITLE(
TX_SID POSITION(1:3) CHAR,
ID_TITLE "get_title_id(:TITLE_NAME)" ,
[code]...
from Control file, TEST_USER and TEST_ROLE is getting populated.
Here RD_ROLE_MASTER script
CREATE TABLE RD_ROLE_MASTER (
"ID_ROLE" NUMBER(38,0) NOT NULL ENABLE,
"TX_ROLE_NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE
[code]...
Here is RD_TITLE_MASTER script
CREATE TABLE RD_TITLE_MASTER(
"ID_TITLE" NUMBER(38,0) NOT NULL ENABLE,
"TX_TITLE_NAME" VARCHAR2(25 BYTE) NOT NULL ENABLE);
Insert into RD_TITLE_MASTER (ID_TITLE,TX_TITLE_NAME) values (7,'RED_LOB_ESCALATION_L1'); what is the problem?
i am trying to create Procedure which will create the partitions based on the other table date values one per each day.
CREATE OR REPLACE PROCEDURE PARTITION_TEST(PART_DATE_TABLE IN VARCHAR2, TABLE_NAME IN VARCHAR2,SCHEMA_NAME IN VARCHAR2)
AS
V_PART_NM VARCHAR2(20);
V_PART_CNT NUMBER;
V_DATE DATE;
V_SCHEMA_NAME VARCHAR(15);
[Code]..
It is not creating the partitions and even not giving any errors.
I have a table which contains some data. But we are dropped and recreated the same table several times. Now I wanted to know that when this table created initially. How to findout the date of creation(very first time).
View 13 Replies View Relatedi want to create a table to perform a task when i insert client account details in this table then check the account type is in(S,C,R) and balance should be also check when account type S then balance >=5000, account type C then balance >=10000 and account type R then balance >=5000 but when i run this query then facing error "ORA-02438: Column check constraint cannot reference other columns"
SQL> ed
Wrote file afiedt.buf
1 create table kcb_acc_tab
2 (
3 accno varchar2(20) constraint accno_pk primary key,
4 name varchar2(20) constraint name_nn not null
5 constraint name_chk check((substr(name,1,1) between 'A' and 'Z') and name=upper(name)),
[code]....
i have 1 xcel sheet in formatted data i want to import data in oracle table .. how do i do dat??
View 5 Replies View Related