I am trying to create a view of a query that i would be using regularly...the query contains a function call in it...can i use it..
If yes when i try to do it . It gives out an oRa-01031:in sufficient privileges.
I am having a view say name vw_mytable , i need to call this view inside the stored procedure it is saying as Grant execute on
usera.vw_mytable to userb;ORA-02204: ALTER, INDEX and EXECUTE not allowed for views
how do i create a store procedure to call a view from another user.Usera is having a view and i need to create procedure in userb and call usera.vw_table.
i want to put a variable inside a view. create or replace view loading as
SELECT H.ORGANIZATION_ID ORG_ID,H.HEADER_ID,H.REQUEST_NUMBER, H.DATE_REQUIRED ISSUE_DATE,H.ATTRIBUTE1,
H.ORGANIZATION_ID,L.INVENTORY_ITEM_ID,SS.SALES_ID,S.SECONDARY_INVENTORY_NAME SUB_INV_CODE,S.DESCRIPTION SALESPERSON,I.SEGMENT1 ITEM_CODE,
[code]....
i want this condition to be like and to_date(H.DATE_REQUIRED,'dd-mm-rrrr') = to_date('Vdate','dd-mm-rrrr') i want Vdate as a variable parameter.
I have question.Using procedure inside the function ?can I get better performance?
View 8 Replies View RelatedIn the follow code example, is it possible to save the seeds that I generated into a table when I call this table function without expliciting doinginsert into <some_table>select select * from table(pkg_seed.getSeed(200)); I try the automonous_transaction clause but it does not work.
--drop package pkg_seed--drop type seed_tab CREATE or replace TYPE seed_rec AS OBJECT( id number,seed number); CREATE or replace TYPE seed_tab AS TABLE OF seed_rec; CREATE or replace PACKAGE pkg_seed IS function getSeed(maxrow in number default 100) RETURN seed_tab PIPELINED;END pkg_seed;/ CREATE or replace PACKAGE BODY pkg_seed IS function getSeed(maxrow in number default 100) RETURN seed_tab PIPELINED IS cursor cur_seed(vmaxrow number) is select rownum id, floor(dbms_random.value(1,1000) ) seed from dual connect by level <= vmaxrow; l_seed cur_seed%rowtype; BEGIN open cur_seed(maxrow); LOOP FETCH cur_seed into l_seed; pipe row(seed_rec(l_seed.id,l_seed.seed)); END LOOP; RETURN; -- the function returns a single result END getSeed;END pkg_seed;/ select * from table(pkg_seed.getSeed(200));
i am trying to create table inside function where in after creating table when am trying to access the table with select statement oracle is throwing error 'Table/view doesnot exist -00942', below is the code snippet
create or replace function example (mkey in varchar2) return varchar2
is
g_key varchar2(100);
l_tbl_ntext exception;
pragma exception_init(l_tbl_ntext , -942);
begin
begin
execute immediate 'select * from example1';
exception
when l_tbl_ntext then
null;
end;
execute immediate 'create table example1(skey varchar2, g_key varchar2) storage(buffer_pool, keep)';
end example;
/
select * from example;
I have code inside function
.....
cursor cur1 is
select *
from sarchkler
where sarchkler_appl_no = in_appl_no
begin
select max(saradap_appl_no) into in_appl_no from saradap;
for rec1 in cur1 loop
......
my question I get variable for cursor after cursor declaration
To display highest marks,least marks,average marks,total marks of the student name entered.
desc stud;
Name Null? Type
----------------------------------------- -------- ----------------------------
SID NUMBER
NAME VARCHAR2(20)
M1 NUMBER
M2 NUMBER
How do I do that using PL/SQL and without Cursor.
DECLARE
cnt number(10);
BEGIN
SELECT COUNT(*) INTO CNT FROM TBL_ADDRESS WHERE ADDRESS_ZIP
IN (SELECT * FROM TABLE(MY_PACK.STR2TBL('46227')));
DBMS_OUTPUT.PUT_LINE (cnt);
END;
MY_PACK.STR2TBL() is a function which takes '|' delimited string, extracts values and returns a table of zipcodes. The function works fine and returns 46227 but the count returned is 0 instead of 280(count returned by replacing inner select with '46227').
I have created a function in form field(when validate item) this should be called in separate procedure. How to call this function in procedure?
View 4 Replies View RelatedAm calling the Function Batch to insert an update statemtnt into Batch_statement table in the DOWNLOAD_FUNC .But its failing with the error
SQL Error : ORA-14551: cannot perform a DML operation inside a query
Below Is the
FUNCTION BATCH(numTABLE_ID IN NUMBER, varSTMT IN VARCHAR2) RETURN NUMBER IS
BEGIN
INSERT INTO BATCH_STATEMENT(QUEUE_ID,TABLE_ID,STATEMENT,QUEUE_SEQUENCE_ID)
VALUES (numQUEUE_ID,numTABLE_ID,varSTMT,1);
RETURN 1;
[code].....
I am encountering error in this code.
WHILE EXISTS ( SELECT * FROM tblOrgChart WHERE fxOrgID = v_chrTempKeyDept )
LOOP
v_intDept := CAST(v_chrTempKeyDept AS NUMBER) + 1 ;
v_chrTempKeyDept := LPAD('',3 - LENGTH(CAST(v_intDept AS VARCHAR2)),'0') || CAST(v_intDept AS VARCHAR2) ;
END LOOP;
Error: PLS-00204: function or pseudo-column 'EXISTS' may be used inside a SQL statement only
Are oracle view have Dynamic view function?
View 8 Replies View RelatedI have 2 tables, ASSIGNMENT and RESEARCH_PAPER. For each research paper, I need to find out :
1. The number of assignments created from it (after a given constant assign date)
2. The number of assignments created from it that have been approved.
3. The number of unique users who have either created or approved an assignment from it
Test data :
create table research_paper (id int, name varchar2(100));
create table assignment (id int, r_paper_id int, assigner_id int, assignee_id int,
approver_id int, assign_date timestamp, approved_yn varchar2(10));
insert into research_paper values (1, 'A');
insert into research_paper values (2, 'B');
[code]....
Assignment :
id r_paper_id assigner_id assignee_id approver_id assign_date approved_yn
-----------------------------------------------------------------------------------------------------------
11 100 200 100 23-10-12 12:00:00.000000000 AMY
22 200 100 200 22-10-12 12:00:00.000000000 AMN
32 100 200 101 24-10-12 12:00:00.000000000 AMY
[code]....
Research_paper:
id name
----------
1A
2B
Expected result :
r_paper_id created approved unique_users
-----------------------------------------------
1 3 2 4
2 3 2 3
I wrote the following query for that :
SELECT rp.id r_paper_id,
COUNT(*) created,
COUNT(
CASE
WHEN a.approved_yn = 'Y'
[code]....
But it fails, saying that 'single-row subquery returns more than one row' when I introduce the 'unique_users' clause. The remaining fields of the output are correct.
CREATE OR REPLACE TYPE TEST_OBJ_TYPE IS OBJECT
(
TEST_ID NUMBER(9),
TEST_DESC VARCHAR(30)
)
/
CREATE OR REPLACE TYPE TEST_TABTYPE AS TABLE OF TEST_OBJ_TYPE
/
[code]....
I need to include the above function in a plsql package. How I can declare a object type and table type in a pks file? the syntax to include the above code in a .pks and .pkb file?
I got this code snippet online when I was looking for function that returns a table type. what exactly that Exception block does? delete the table when there is an exception, otherwise return the table type?
There are 2 Oracle databases with pseudo names Remote and Local. I have a function in Remote called FUS.F_Return_10 which simply returns 10 for testing purposes, where FUS is a schema name. In Local I want to create a procedure that will call the above function. Here's the PL/SQL:
CREATE OR REPLACE PROCEDURE TEST
(
V_COUNT OUT NUMBER
)
AS
V_FOO NUMBER(2,0);
BEGIN
[Code]...
There's a Public Database Link called PER_ACC in Local. When I try to create this procedure I get: Encountered symbol "@" when expecting one of the following: .(*%&................
where my mistake is?
Calling function
select PACK.MAIN('blah') from dual
generates:
ORA-14551: cannot perform a DML operation inside a query
ORA-06512: at "SYSADM.NEW_QUANTUM_PACK", line 756
ORA-06512: at "SYSADM.NEW_QUANTUM_PACK", line 245
Unfortunately the Body is not accessible to see.The spec of the function is:
FUNCTION MAIN (mvar IN varchar2) RETURN varchar2; I read somewhere that I can call it like:
var myVar VARCHAR2; call PACK.MAIN('blah') into :myVar
But this generates: ORA-01008: not all variables bound
Pipe Function and Materialized View.
There is a materialized view:
CODECREATE MATERIALIZED VIEW MY_MAT_VIEW NOLOGGING
REFRESH FORCE
START WITH SYSDATE NEXT SYSDATE + 5/24/60
AS
SELECT F1,
F2,
F3
from SOMETAB;
And there is a pipelined function:
CODEDROP TYPE MY_MAT_VIEW_table_type;
DROP TYPE MY_MAT_VIEW_row_type;
CREATE TYPE MY_MAT_VIEW_row_type AS OBJECT
(
F1 number,
F2 varchar2(100),
F3 date
[code].......
I've noticed that when materialized view is near to be refreshed (every 5 minutes) there is some "delay" in getting result sets using this query:
SELECT *
FROM TABLE(FN_GET_MY_MAT_VIEW(100)) a;
And when the refresh is finished the result set returns immediately.
Question.
Is there a way to avoid such "delay" while materialized view is refreshing?
I have to write function that receives department name and an aggregation operation (average, maximum, minimum) and apply the operation on the salary of employees working on the given department and return the result.
here is my select statement:
select distinct d.deptno, d.deptname, max(e.salary)
from employee e join department d
on e.deptno=d.deptno
where d.deptname=upper('finance')
group by d.deptno, d.deptname;
[code]...
I'm trying to create a function that simply returns the current database name (e.g: select db_unique_name FROM v$database ) from a function but when I compile it comes up with :
Error(9,5): PL/SQL: SQL Statement ignored
Error(9,44): PL/SQL: ORA-00942: table or view does not exist
I am compiling and running this as the SYSTEM user and I do think that I need to set privledges/roles, etc to allow this (since I have read that using synonyms in functions/procedures requires permissions...but I cannot seem to find anything that tells me exactly what role/priveledge I need to grant/allow to let this happen.
I executed the following statements
SQL> CREATE OR REPLACE Function test
2 ( name_in IN varchar2 )
3 RETURN number
4 IS
5 cnumber number;
6
7 cursor c1 is
[code]....
how I can view the full statement of creating the function.
I have a question about nested materialized view.
Firstly, I have created 3 mv log on 3 table(target,target extension,brand). Secondly, I created the first mv and its log.
Lastly, I created the second mv from the first mv. This time I used the pivot function, but it cannot work now.
--1 create mv log
drop MATERIALIZED VIEW LOG ON target;
drop MATERIALIZED VIEW LOG ON targetextension;
drop MATERIALIZED VIEW LOG ON brand;
CREATE MATERIALIZED VIEW LOG ON target with rowid, sequence(id);
CREATE MATERIALIZED VIEW LOG ON targetextension with rowid, sequence(targetid,brandid,EmailPermission,NumberOfAllOrders);
CREATE MATERIALIZED VIEW LOG ON brand with rowid, sequence(brandid, brandname);
--2 create the first mv and it's log
drop MATERIALIZED VIEW mv_target1;
CREATE MATERIALIZED VIEW mv_target1
REFRESH FAST START WITH SYSDATE
NEXT SYSDATE + 1/1440
AS
select t1.rowid t1_rowid, t2.rowid t2_rowid, t3.rowid t3_rowid,
t1.id targetid,
t3.brandname,
[code].....
--3 create the second mv
drop MATERIALIZED VIEW mv_target2;
CREATE MATERIALIZED VIEW mv_target2
REFRESH FAST START WITH SYSDATE
NEXT SYSDATE + 1/1440
AS
select * from mv_target1
pivot(max(EmailPermission) EmailPermission, max(NumberOfAllOrders) NumberOfAllOrders for brandName in ('XXX' XXX,'YYY' YYY ,'ZZZ' ZZZ));
Now, Here is a problem, it throws "ORA-12015: cannot create a fast refresh materialized view from a complex query". Then I used dbms_mview.explain_mview to see the reason, and it tell me the following
REFRESH_FAST_AFTER_INSERT "inline view or subquery in FROM list not supported for this type MV"
declare
lv_sqltext varchar2(4000);
begin
execute immediate 'truncate table mv_capabilities_table';
lv_sqltext := 'select * from mv_target1
pivot(max(EmailPermission) EmailPermission, max(NumberOfAllOrders) NumberOfAllOrders for brandName in (''XXX'' XXX,''YYY'' YYY ,''ZZZ'' ZZZ))';
dbms_mview.explain_mview(lv_sqltext,'nested=>TRUE');
commit;
end;
/
I have a dynamic query stored in a function that returns a customized SQL statement depending on the environment it is running in. I would like to create a Materialized View that uses this dynamic query.
View 1 Replies View Relatedcan we change the existing materialized view to normal view? if yes how?
View 2 Replies View RelatedI'm trying to create a Materialized View on a remote database from a simple view. The reason is, the data owners don't want to grant explicit tables privileges to external subscribers.
A new schema is created to publish data in the form of a view. I've created mlogs on the master tables, and granted them to the subscriber, but it's still complaining about a missing primary key on the view. A primary key does exist in the master table.
Is there another work around for this situation without having to work inside the data sources' environment?
is it possible to create primary key on view and use this view for creating foreign key .
View 3 Replies View RelatedWe wrote one data load process to load GZ files into Database.during process we will change client facing view definitions to backup table so that we can work on base tables.
This view definition changes are related to FROM and WHERE clause (not columns/type). during load process, client/user may connect to current server and accessing these views. My question is what will be the reflection of changing view definition while user is accessing view?
I created a scenario-
STEP1: Created a view-
create or replace view view_01 as
select object_name from dba_objects union all
select object_name from dba_objects union all
select object_name from dba_objects union all
[code]....
View definition is replaced by new definition while select is executing on that view. select returned number of records as per view definition one.
I have a materialized view "pro_mview",I am trying to refresh the MVIEW by using the following statement.
EXEC DBMS_MVIEW.REFRESH('pro_mview','C');
But I am getting the below error.
*
Error at line 1:
ORA-12008: error in materialized view refresh path
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2256
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2462
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2431
ORA-06512: at line 1
I am able to fetch the data from that materialized view(pro_mview).
Is anyway to create function based index for group function columns.
For example
select max(timestamp),min(age),averge(sal).... ... .. from tab;
I have the following C code:
class Factorial {
public:
int getVal (int a);
};
[code]....
/When I am trying to execute this function always get the ORA-06521. I changed the data types - but nothing changed.
Just in case, listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = db)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
[code]....