SQL & PL/SQL :: Run Procedure Without Passing Value For IN Parameter
Mar 10, 2012
I have a pl/sql procedure having IN, OUT and IN-OUT parameters, this procedure in called from front end application. Now I need create a script to run this procedure from back end (sql prompt) and the result must be same as the front end application call to this procedure.
For the procedure I don't want to pass IN parameter instead to pick the value from the package where the derivation is defined. how to run this procedure from sql prompt without passing value for IN parameter.
View 6 Replies
ADVERTISEMENT
Jan 4, 2011
I have got this procedure:
CREATE OR REPLACE PROCEDURE GET_NUM_ROWS(TABLE_NAME VARCHAR2) AS
NUM_ROWS NUMBER;
BEGIN
SELECT COUNT(*) INTO NUM_ROWS FROM TABLE_NAME;
DBMS_OUTPUT.PUT_LINE(NUM_ROWS);
END;
When I try to compile it, the compiler says:
ERROR at line 4: PL/SQL: ORA-00942: table or view does not exist.
View 3 Replies
View Related
Dec 27, 2012
I have a procedure named 'GetShipperinfo' which takes i_name as input and needs to build a cursor taking i_name as input
i.e.
The following sql when executed at sqlplus prompt gives correct results.
select dept, supplier, shipper_id
from shippers
where upper(shipper_name) like upper('Frank Robert%');
How can I transform this inside a cursor within a procedure passing 'Frak Robert' value as i_name input.
i.e I should be able to call the procedure as follows
sql> variable v1 varchar2;
sql> exec pkg_shipment.GetShipperinfo('Frank Robert',:v1);
sql> print :v1;
Should the cursor inside the procedure be built as follows
cursor c1 is
select dept, supplier, shipper_id
from shippers
where shipper_name like ''||upper(i_name'%''||)'';
Iam unable to build the sql for the cursor.
View 3 Replies
View Related
Feb 6, 2012
This procedure is not working properly.
create or replace procedure bank_search_sp
(
p_tablename in varchar2,
p_searchname in varchar2,
p_bankcode out varchar2,
p_bankname out varchar2,
p_dist_code out number
)
as
v_tem varchar2(5000);
begin
v_tem :='select bankcode,bankname,dist_code from ' || UPPER (p_tablename) || '
where bankname like '''|| p_searchname||'';
execute immediate v_tem into p_bankcode,p_bankname,p_dist_code using p_searchname ;
commit;
end bank_search_sp;
the Procedure is getting created but i dont know what actually happens when it was executed ,This is the error shown..ORA-01756: quoted string not properly terminated
ORA-06512: at "PENSIONS.BANK_SEARCH_SP", line 14
ORA-06512: at line 1
View 1 Replies
View Related
Oct 9, 2008
I have a scenario where I have to pass a paramter to "in statement". When I run the query from SQL plus its working fine.......but when I run the query at run time it doesnot come back with the results. I am sure its formating issue.
This is how I create a paramter
_sbInStatement.Append("(");
foreach (ListItem item in _listBox.Items)
{
[Code]....
oCmd.Parameters.Add(":InStatement", OracleDbType.Varchar2).Value = InStatement;
View 2 Replies
View Related
Jun 14, 2011
I have a procedure with 20 parameters, acutely it is to update a table and each param represents respective columns in a table. I want to update only few selected columns(random), as of now am passing Null as param values for remaining.
Is there any way to ignore the unnecessary parameters instead of passing NULL value.My Proc call looks like...
Exec MyProce(IN_ID, NULL, NULL, NULL,NULL,NULL,'SOME_VALUE', NULL,NULL,NULL,NULL,NULL,NULL,...);
Or
Exec MyProce(IN_ID, NULL, NULL, NULL,'SOME_VALUE' ,NULL,'SOME_VALUE', NULL,NULL,NULL,NULL,NULL,NULL,...);
View 4 Replies
View Related
Mar 23, 2012
we have a table which name is empl have two column (comapnyname,jobdate) i want output after passing parameter which name is month which value is like(feb 2011,or mar 2011 or apr 2011 or jun 2011 etc) output should come the nameof company with jobdate whose jobdate is equal to 3 or greate than three
name of company,jobdate whose job date in particular month is greater than three or equal to three the purpose of this we want to find only the name of company where we visit morethan three times in particular month table structure is
create table empl(companyname varchar2(10),jobdate date)
insert into empl values('ABC','1-feb-2011')
insert into empl values('ABC','10-feb-2011')
insert into empl values('ABC','21-feb-2011')
insert into empl values('xyz','18-feb-2011')
insert into empl values('xyz','1-feb-2012')
insert into empl values('xyz','1-apr-2011')
insert into empl values('ABC','28-feb-2012')
output:
after passing parameter month=feb 2011
companyname jobdate
abc 1-feb-2011
abc 10-feb-2011
abc 21-feb-2011
View 3 Replies
View Related
Oct 3, 2011
How can I pass multiple value in one parameter
example
select * from table
where table_cd in ('01','02','03','04')
here i want to put multiple value like above query by select 1 value in list
like when user select 'A'
THE VALUE PASS IN WHERE CLAUSE ('01','02','03')
FOR 'B' ('03','045','07')
FOR 'C'('044','046','078')
View 6 Replies
View Related
Dec 13, 2011
i have a SQL query . In the where clause of the query , there is function called dimension_intersect which takes 2 parameters.Now , when the 2 dimensions passed intersect , the function returns "Y" and the query works as expected
Function in where clause is as below
Dimension_intersect(Dimension1,select dimension2 from product where product_sys_id=1)='Y'
The above function works fine till only 1 record is returned by the inner subquery used in above function. But when "select dimension2 from product where product_sys_id=1" return 2 dimensions then the function fails as it can accept only one dimension at a time . I am not allowed to edit this function. I need to find a way to pass both the dimensions one at a time.
Query
-----
SELECT DISTINCT PROD_LONG_NAME,
P.PROD_ID_USER,
MRS.RESTRICTION_SEVERITY,
MRT.RESTRICTION_TYPE,
RESTRICTION_COMMENT RESTRICTION_DETAIL,
[code].......
View 15 Replies
View Related
Apr 13, 2004
I have a table Student with two columns Rno and Name and i write following PL-Sql, it is working fine, my question is that how can i pass the parameter to cursor in the following query, e.g. if i pass the roll no. 501 then it should display only the particular Name.
declare
��� cursor st_name is
����������� select rno,name from student;
����������� studentnm st_name%ROWTYPE;
begin
�� open st_name;
[code]....
View 6 Replies
View Related
Mar 27, 2012
i have a table empl which have three column (name,period,attendance)if we pass parameter which value is based on period column
like :January
then out should come sum of all attendence of january group by name like that
name attendance
a60.00
b20.00
c20.00
w40.00
if we pass parameter value :February then attendance should come sum of (January and February) and if we pass parameter March then attendance should come sum of(January,February and march)
create table empl (name varchar2(10),period varchar2(10),attendance number)
insert into empl values('a','January',20)
insert into empl values('a','January',10)
insert into empl values('a','January',30)
insert into empl values('a','February',20)
insert into empl values('a','March',60)
insert into empl values('b','January',20)
insert into empl values('c','January',20)
insert into empl values('w','January',40)
View 22 Replies
View Related
Feb 16, 2010
I have a stored proc which takes IN parameter of datatype varchar2.When I am trying to run the proc it is throwing error that "input buffer too small".The datatype assigned to IN parameter is of varchar2(200) but actually the length of the parameter passed is around 500 characters.the way to increase the length of Input parameter to 500 characters??
View 16 Replies
View Related
Apr 30, 2010
i AM PASSING CHARATER AS PARAMETER TO SEARCH
create or replace procedure procedure_name(p_like VARCHAR2)
is
cursor cursor_name
is select last_name from employees
where UPPER(last_name) like '%p_like%';
emp_rec cursor_name%rowtype;
begin
open cursor_name;
[code]....
WHAT SHOULD NEED TO MODIFY::::::
View 1 Replies
View Related
Jun 22, 2012
how do I pass the values that i get in the cursor to a select statement. If table1 values are 1,2,3,4 etc , each time the cursor goes through , I will get one value in the variable - OfferSo I want to pass that value to the select statement...the one below does not work.
drop table L1;
create table L1
(col1 varchar(300) null) ;
insert into L1 (col1)
select filter_name from table1 ;
[code]....
View 4 Replies
View Related
Jan 24, 2012
How to pass a values from one to another, but without using parameters or globals. I've used parameters and every time i have to list the values of the form that values have been passed to, it ask do you want to save... even if I didn't passed any values. It's because my code in where-new-form instance, where i give values to a parameters.
View 17 Replies
View Related
Jan 5, 2011
can we pass parameter in a link. i.e when we open a new form clicking on the link, some values to be passed to the form so that new form get populated with that value.
View 2 Replies
View Related
Dec 8, 2010
I need to know how to pass the ref cursor as INOUT parameter to a procedure. I have the following procedure and I need to execute it.
PROCEDURE get_site_setup_detail (
p_study_id IN SITES.study_id%TYPE,
p_proj_act_date IN VARCHAR2,
[code]....
View 2 Replies
View Related
Feb 2, 2012
I had created drill down reports. rep_1 dispalying various Location_cd. by clicking location_cd The parameter form of rep_2 is displayed in which location_cd is displayed which is already selected and accept dept_cd from user. While running the rep_2 the parameter location_cd is passing null value.
View 1 Replies
View Related
May 24, 2010
I have a requirement where in I have to store large data in one of the database columns using stored procedure.
I have declared the column as CLOB as it can store upto 4GB and also the input parameter for the procedure as CLOB. But when I am trying to pass large data it is not allowing to store as it is throwing literal string too large error.
Is there any restriction in the data size to be passed to the stored procedure?
View 9 Replies
View Related
Oct 18, 2011
get rid of the below error
CREATE OR REPLACE FUNCTION fn (
p_salesrep_id IN jtf_rs_salesreps.salesrep_id%TYPE,
p_org_id IN jtf_rs_salesreps.org_id%TYPE,
p_cnf_date IN emcint_ord_headers_all.creation_date%TYPE
[Code]....
Invoking Functions
select fn(-3,293,'1/1/1952'), resource_id from jtf_rs_salesreps
where rownum < 5
ORA-06552: PL/SQL: Statement ignored
ORA-06553: PLS-382: expression is of wrong type
View 8 Replies
View Related
Jan 31, 2012
I prepared a report in Oracle reports and trying to run the report through command line by creating a batch file. but i am getting the following error message when i run the batch file
REP-0069: Internal error
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output
REP-50159: Executed successfully but there were some errors when distribute the output
the batch file is as follows
D:DevSuiteHome_1BINRWRUN p:spannawazeitspanna_wa_zeit.Rep userid=alrayatec/alrayatecprod@alraya.world
DESFORMAT=HTMLCSS DESTYPE='mail' DESNAME='sarfraz_it@hnd.com'
View 1 Replies
View Related
Jul 27, 2013
I have developed a report using apex shared components (report query and report layout) along with BI Publisher for report printing in pdf format. the Report template is built using Template Builder for Word. I have configured my Apex4.1 env with BI Publisher 11. This report is working fine for hardecode ID ( like REQUEST_ID=10 ). to make report dynamic i have made following additions in the report
I have added where clause in report query as WHERE REQUEST_ID = :REQUEST_ID (:REQUEST_ID is the text field in my page).
Added a text field names :REQUEST_ID to get user input at run time.
Create a button and add Repot Query URL in its properties. When i run the report with some valid value in :REQUEST_ID text field i did not get expected result infect there is no record getting displayed in the PDF file. i think this is not the write way to do this but interestingly im not getting any error. how can i get this functionality in apex this way or the other ?
View 0 Replies
View Related
Dec 10, 2010
I have a procedure that accepts a date as an input parameter. This parameter is used in a select statement to match on a table column of date type.
1) Should the parameter be declared and passed in as a varchar2 and then converted using to_date() or declared as a date type? If it's declared as a date type what format should it be passed in as, ie. '01-MAY-2010' or '01-MAY-10' or etc.
2) When I run the sql query, knowing data exist, like "WHERE test_date = '22-NOV-10'" I get no results so I know I'm not matching the date correctly but if I use "WHERE test_date LIKE '22-NOV-10%'" I get the correct results. Trying to build a variable to match this, and use in a cursor, consistently gives me the 'non-numeric character was found...' error
3) formatting the test_date input variable to match on the date type column.
View 21 Replies
View Related
Apr 18, 2013
How to pass data of one procedure to another procedure in oracle forms.
View 1 Replies
View Related
Aug 30, 2012
how can I pass the sh variable (.i.e file name stored in sh variable called($F)) as a input of below mention procedure (YODEL_XL_ INS_SDG_ COMMER_ PROD)
for F in *.dat; do
#
echo $F
#
#sqlldr apps/apps control=$CONTROL data=$F
# Below Part is used for Add the file name into table
[code]...
View 8 Replies
View Related
Jun 5, 2013
sort out the error of this procedure to search an employee by passing employee fname or middle or last to get his name .
CREATE OR REPLACE PROCEDURE "WEB_MASTER"."SEARCH_EMPLOYEE"
(empname IN VARCHAR2) is
cur number;
v_emp_name VARCHAR2 (100);
r number;
begin
[code]....
View 6 Replies
View Related
Oct 26, 2012
Oracle 11.2.0.1
Windows
create type np_type is varray(3) of number
/
create type cn_type is varray(3) of number;
/
create type cxn_type is varray(3) of varchar2(2000)
/
I created TEST table by below pl/sql block :
declare
execstr varchar2(2000) :='create table test(';
begin
for i in 1..80 loop
[Code]....
*ERROR at line 5: ORA-06550: line 5, column 8: PLS-00103: Encountered the symbol "MYPROC1" when expecting one of the following: := . ( @ % ;
The symbol ":=" was substituted for "MYPROC1" to continue.
SQL>The above procedure will insert the supplied numbered string into the test table which split the numbered string based upon supplied splitids of sp_table.
View 7 Replies
View Related
Apr 29, 2010
I created a table and some type definitions in oracle 10.2.0.3 DB as follows. There is also a procedure that I defined and is shown below.
SQL> create table test_proc
(
test_name varchar2(10),
test_ver number (3,3),
active_flag number(2)
);
Table created.
SQL> select * from test_proc;
TEST_NAME TEST_VER ACTIVE_FLAG
---------- ---------- -----------
AFP 1.5 2
PSA 11.89 0
EHIV 99.5 3
aHAVM 1.45 9
[code]....
Now from Pro*C function I want to pass a similar array of structure to this procedure and return it via the out parameter of the procedure back to Pro*C. How do I do it?
I am using the attached program but its giving me compiler error as follows..
Error at line 31, column 1 in file sample.pc
proc_modify_tdefs (:in_tdefs,:out_tdefs);
1
PLS-S-00306, wrong number or types of arguments in call to 'PROC_MODIFY_TDEFS'
Error at line 31, column 1 in file sample.pc
proc_modify_tdefs (:in_tdefs,:out_tdefs);
[code]....
View 2 Replies
View Related
Sep 5, 2012
I am writing a procedure in which I have a input string parameter in the following way..('NYC,ATL,OKC,KAC,LA'). I need to use that string to search values in the table.
Example
create or replace procedure search_city(p_string varchar2)
/*
paramater will be like ('NYC,ATL,OKC,KAC,LA')
*/
is
v_city varchar2(40)
begin
for i in (select city_name from cities
where city_code in (p_string )
) loop
v_city := i.city_name;
end loop;
end ;
View 2 Replies
View Related
Sep 17, 2013
this PROCEDURE for Paging.
PROCEDURE cursor_example
IS
p_id NUMBER;
p_status number;
p_rownum number;
[code]...
View 1 Replies
View Related
