Is it possible to insert new id without sequence id.
For e.g. :
1 , 'BOLT'
2 , 'CHAIN'
i need to insert 3rd and 4th row as
3 , 'screw'
4 , 'driver'
without using sequence (autonumber gen).
I am having the emp table :
empno enmae job
1111 ramu S.E
7658 VENU S.S.E
8280 GETA TRAINEE
alter table emp add sno number
for that sno i have to generate 1,2,3,...
I found nothing in SQL (all in PL/SQL).I have a table:
create table Parent (pk_id number primary key); --which is filled using sequence seq_Parent.
And I have a child table:
create table Child (rRef number, fk_parent number primary key (rRef, fk_parent);
that I need to insert into Child using seq_parent but I want to insert the same sequence for each group of rRef. I dont know how to do that using SQL not PL/SQL.
I have a stored proc SP_INSERT_TRAINEES.Here sTraineeNo is provided as input which has count of trainee needs to be inserted in table aaa_foc.user_profile. The sequence is used to generate ids as :
CREATE SEQUENCE AAA_FOC.TRAINEE_ID INCREMENT BY 1 MINVALUE 0 MAXVALUE 999 NOCACHE NOCYCLE NOORDER
I want the values for ids to be inserted as 001,002,003,.......010,011,................099,100,101,............999.So that the values in the table would be like TRAINEE001,002.......
I have tried to use LPAD to it but the values are getting insertes as TRAINEE1,2,3...........
The code is given below:
CREATE OR REPLACE PROCEDURE AAA_FOC9.SP_INSERT_TRAINEES
(sTraineeNo IN NUMBER,
nReturned_O OUT NUMBER)
IS
ln_insert_cnt PLS_INTEGER :=0;
nSequence NUMBER:=0;
[code]......
I am trying to understand the difference between using sequence.NEXTVAL from DUAL as against using it direclty in an INSERT statment.
--Sequence Creation
CREATE SEQUENCE SEQ_ID START WITH 1 MINVALUE 1 NOCYCLE CACHE 500 NOORDER;
--Table1 Creation
Create table TABLEA (COL1 number, COL2 varchar2(10),
constraint COL1_PL primary key (COL1));
--Table2 Creation
Create table TABLEB(COL3 number);
alter table TABLEB add constraint COL1_FK foreign key(COL3) references TABLEA(COL1);
-- Option1 - Using sequence.NEXTVAL from DUAL
DECLARE
v_seq_num NUMBER;
BEGIN
SELECT SEQ_ID.NEXTVAL INTO v_seq_num FROM DUAL;
INSERT INTO TABLEA (COL1, COL2) VALUES (v_seq_num, 'test');
INSERT INTO TABLEB (COL3) VALUES (v_seq_num);
END;
-- Option2 - Using sequence.NEXTVAL in INSERT USING RETURNING INTO clause
DECLARE
v_seq_num NUMBER;
BEGIN
INSERT INTO TABLEA (COL1, COL2) VALUES (SEQ_ID.NEXTVAL, 'test') RETURNING COL1 INTO v_seq_num;
INSERT INTO TABLEB (COL3) VALUES (v_seq_num);
END;
I am using Oracle 10G version. I need a code base for new Sequence Trigger.
Requirement : As per the request, before INSERT trigger will generate the sequence ID from AA001 to AA999 value. But once the sequence is reached to AA999, the next sequence value will be generated normal (start from AB001 etc..).
I've got plenty of sequences. How can I identify that what are the sequences acting on a table?
View 8 Replies View RelatedI want to create a table, whose first column , patient_id, should be a sequence.
View 9 Replies View Relatedis it Possible to Assign the Sequence Name During the Table Creation.
View 1 Replies View RelatedI have a table ABC with two columns NAME and SEQUENCE. The valid values of sequence are from 1..50. The table may not have all the Sequence number. For example following is the data in my table..
Quote:NAME SEQUENCE
------------------------
Jonh| 5
Amy| 1
Suresh| 3
I need a SQL to get the data like
Quote:NAME SEQUENCE
------------------------
Amy| 1
| 2
Suresh| 3
| 4
Jonh | 5
|6
|7
..
..
..
|50
Basically I want to have rows for the sequence numbers which are not present i my table. I thought of using the following query to generate a sequence and then join, but does not work.
select rownum from dual connect by rownum <=50
I tried something like
with temp as (select name, sequence from abc where supp_ref_order is not null order by sequence )
select rownum as num, temp.name from dual, temp connect by rownum <=50 where temp.sequence =num
Beginning with 12c, there is now a way to associate a sequence with a table. It's a new feature called an Identity column.
create table t
(some_id number generated as identity --< creates a system generated sequence
,name varchar2(30)
);
insert into t (name) values ('Smith');
insert into t (name) values ('Jones');
[code]....
I had created a new table named USERLOG with two fields from a previous VIEW. The table already consist of about 9000 records. The two fields taken from the VIEW, i.e. weblog_views consist of IP (consists of IP address), and WEB_LINK (consists of URL). This is the code I used,
CREATE TABLE USERLOG
AS
SELECT C_IP, WEB_LINK FROM weblog_views;
I want to add another column to this table called the USER_ID, which would consists of a sequence starting with 1 to 9000 records to create a unique id for each existing rows. I'm using Oracle SQL Developer: ODMiner version 3.0.04. I tried using the AUTO-INCREMENT option,
ALTER TABLE USERLOG
ADD USER_ID INT UNSIGNED NOT NULL AUTO_INCREMENT;
But I get an error with this,
Error report:
SQL Error: ORA-01735: invalid ALTER TABLE option
01735. 00000 - "invalid ALTER TABLE option"
I had created a new table named USERLOG with two fields from a previous VIEW. The table already consist of about 9000 records. The two fields taken from the VIEW, i.e. weblog_views consist of IP (consists of IP address), and WEB_LINK (consists of URL). This is the code I used,
CREATE TABLE USERLOG
AS
SELECT C_IP, WEB_LINK FROM weblog_views;
I want to add another column to this table called the USER_ID, which would consists of a sequence starting with 1 to 9000 records to create a unique id for each existing rows. I'm using Oracle SQL Developer: ODMiner version 3.0.04.
I tried using the AUTO-INCREMENT option,
ALTER TABLE USERLOG
ADD USER_ID INT UNSIGNED NOT NULL AUTO_INCREMENT;
But I get an error with this,
Error report:
SQL Error: ORA-01735: invalid ALTER TABLE option 01735. 00000 - "invalid ALTER TABLE option"
How to identify the specific sequence name applied on a table.
View 4 Replies View RelatedMy table have duplicate records. I want to impose a primary key on that table. For that I have to replace duplicate values of a column with next value of a sequence.
View 2 Replies View RelatedI use a sequence to generate an alphanumeric code and I need to update all rows of a table with that sequence. The sequence is created with this code:
SELECT (CHR(TRUNC(s.nextval/1000) + ASCII('A')) || LTRIM(TO_CHAR(MOD(s.currval,1000),'099'))
FROM dual;
I have tried many things - most recently
Update t3_temp_table
SET mergecode =
SELECT (CHR(TRUNC(s.nextval/1000) + ASCII('A')) || LTRIM(TO_CHAR(MOD(s.currval,1000),'099'))
FROM dual;
I get missing expression error.
It works fine if I use a straight s.nextval
I have a table as below:-
CREATE TABLE TEST_EMP_WIP
(
EMP VARCHAR2(20 BYTE),
WIP NUMBER,
MAX_SEQUENCE NUMBER
)
[Code]....
EMP WIP MAX_SEQUENCE RANK
002 2 2 1
003 1 4 2
005 3 5 3
010 1 4
011 1 5
I have to find the next EMP whose MAX_SQUENCE needs to be updated with a sequence. In this case the next would be '010' I fetched the EMP who falls after the max value of the column max_sequence in order of EMPCODE.
select emp_next from (
SELECT emp,max_sequence, LEAD(emp, 1, 0) OVER (ORDER BY emp) AS emp_next
from test_emp_wip where wip > 0 )
where max_sequence=(select max(max_sequence) from test_emp_wip where wip > 0)
EMP_NEXT
010
After sometime, the record would look like :-
EMP WIP MAX_SEQUENCE RANK
002 2 2 1
003 1 4 2
005 3 5 3
010 1 6 4
011 1 7 5
Now the next update should be done to the EMP '002' in cyclic manner.
tell me a way to do this. I can insert new columns if needed in table for calculation.
primary key constraint on transaction_dtl_bk is affecting the insertion of next correct rows.
CREATE OR REPLACE PROCEDURE NP_DB.san_po_nt_wnpg_1 (
dt DATE
)
IS
v_sql_error VARCHAR2 (100); -- added by sanjiv
v_sqlcode VARCHAR2 (100); ---- added by sanjiv added by sanjiv
[code]...
Oracle 11gI have a large table of 125 million records - t3_universe. This table never gets updated or altered once loaded, but holds data that we receive from a lead company. I need to select records from this large table that fit certain demographic criteria and insert those into a smaller table - T3_Leads - that will be updated with regard to when the lead is mailed and for other relevant information. select records from this 125 million record table to insert into the smaller table.
I have tried a variety of things - views, materialized views, direct insert into smaller table...I think I am probably missing other approaches. My current attempt has been to create a View using the query that selects the records as shown below. Then use a second query that inserts into T3_Leads from this View V_Market. This is very slow. Can I just use an Insert Into T3_Leads with this query - it did not seem to work with the WITH clause? My Index on the large table is t3_universe_composite and includes zip_code, address_key, household_key.
CREATE VIEW V_Market asWITH got_pairs AS ( SELECT /*+ INDEX_FFS(t3_universe t3_universe_composite) */ l.zip_code, l.zip_plus_4, l.p1_givenname, l.surname, l.address, l.city, l.state, l.household_key, l.hh_type as l_hh_type, l.address_key, l.narrowband_income, l.p1_ms, l.p1_gender, l.p1_exact_age, l.p1_personkey, e.hh_type as filler_data, 1.p1_seq_no, l.p2_seq_no , ROW_NUMBER () OVER ( PARTITION BY l.address_key ORDER BY l.hh_verification_date DESC ) AS r_num FROM t3_universe e JOIN t3_universe l ON l.address_key = e.address_key AND l.zip_code = e.zip_code AND l.p1_gender != e.p1_gender
[code]....
I have a table with a BLOB column ;
I want read data from table and insert to another table with a cursor
My code is :
procedure read_data is
cursor get_data is
select id,image from picture1;
id1 number;
pic blob;
begin
open get_data;
[code]....
when I run form , error FRM-40734 occurred
error in line " fetch .... "
My scenario is I need to insert into History table when a record is been updated into a tabular form(insert the updated record along with the additional columns Action_by,Action_type(Like Update or delete) and Action Date Into History table i.e History table contains all the records as the main table which is been visible in tabular form along with these additional columns ...Action_by,action_type and action_date.
So now i dont want to create a befor/after update trigger on base table rather i would like to create a generic procedure which will insert the updated record into history table taking the page alias and pade ID as the parameters(GENERIC procedure is nothing but whcih applies to all the tabular forms(Tables) contained int he application ).
I need to take a snapshot of a table before insert or update happens to that table.... in oracle 10g. I am reading the MV docs from oracle and below link..
[URL].......
how MV should be written for this and how to schedule it in dbms_jobs for auto refresh?
assuming that t1 is the table where DML operation are goin to happen so before any insert or update, snapshot has to be taken, and I am assuming that to do this it would look something like this?
create materialized view my_view refresh fast as select * from t1;
create materialized view log on my_view;
and then schedule in a dbms_jobs?
following is the requirement
External Table
WKSHT_FILE_EXT
wksht_line
Export Table
Wksht_export
global_idvarchar2(10)
wksht_linevarchar2(250)
[code]....
Step 1.Insert all records from the external table into the export table. Truncate the export table first
Step 2.Read in a record from the export map table
Step 3.Search through export table records looking for the key words BRANCH =. Compare the branch code with the branch code form the map table
Step 4.If a match is found mark all records in the export table for the worksheet with the global ID from the export map table as follows..The first line of a worksheet is marked by the words WKSHTS..The last line of the work sheet is marked by the words COMPANY CONFIDENTIAL..We will need to capture the line break so also mark the next line after the COMPANY CONFIDENTIAL line
Step 5.Continue with Steps 2 - 4 until all records have been processed from the export map table.
first I have to create a procedure ti insert data from external table to export table.Global id will be blank.it will be updated by the mapping table's Global Id when The EB COLUMN's data(i.e 8p,2Betc ) will match with the BRANC=NA,2Betc of the datasheet loaded from the external table.. FOLLOWING IS THE SAMPLE DATASHEET
WKSHTS AAAAA BBBBBBBBBBB ELECTRONICS INC. TIME REPORT-DATE PAGE
SORT - BR, SLSREP AEC FIELD SALES REPRESENTATIVE 16:14 09/21/12 1
BRANCH = 2B
EMPLOYEE NAME SALVAAG, GREGG Days in the Month 28
[code]....
THERE ARE 2 pages..I have to split this LONG REPORT STORED IN WKSHT_LINE COLUMN OF EXPORT TABLE to 2 records..like wise 500 pages are there means 500 records.. AND THEN FIND BRANCH= after that which two words will come i.e NA,2B etc if it will MATCH WITH MAPPING TABLE"S EB COLUMN"S DATA,THEN MAPPING TABLE's GLOBAL ID WILL BE UPDATED TO EXPORT TABLE's GLOBAL ID WHICH IS BLANK
Trying to auto insert the newest records from one table into another Table. I have a vendor provided table that is part of my database (running Oracle 9i) so I can't change the underlying structure to it or their process stops fluxing. However, I can add a trigger to it. What I want to do is this:
When the vendor's software inserts a new row (through their own automated process) I want to insert data from that same new record into another table of my own. (where of course I can re-format it, etc., and make the data my own)
The original vendor table does not have a insertion timestamp field to work off of.What is the best way to trigger an insert off the latest inserted record? It works to replace all the records in the entire vendor table but I only want to insert one record at a time.
I have table t1 and t1 , I want a procedure that will insert all records from t1 into table t2 and after successfull insert table t1 should be truncated .
If their is any problem in insert in to table t2 , the truncate command should not work .
Truncate command should work only after successfully insert command .
how to adjust a total (counter) after a record is inserted into a table.
the dilemma i am facing is we are using third party software for our fundraising operations so I have no control over what gets done in the background as users process their daily batches into the system. below is the scenario:
create table paytable(
idnumber number(12),
appealcode varchar2(20),
batchno number(8),
trantype varchar2(3),
transnum number(8),
split_transnum number(8));
[Code]..
IDNUMBER APPEALCODE BATCHNO TRA TRANSNUM SPLIT_TRANSNUM
---------- -------------------- ---------- --- ---------- --------------
16084 DVFG1206 20120808 PP 23853576 1133821
16084 DVFG1206 20120808 PPO 23853577 1133821
1234 DVFG1206 20120808 PP 23853578 1133822
create table appealtable
(appealcode varchar2(20),
total# number(9),
total$ number(13,2));
[Code]...
APPEALCODE TOTAL# TOTAL$
-------------------- ---------- ----------
DVFG1206 100 2500
during batch posting records are inserted into the paytable, on some pledge donations donors will send overpayments when fulfilling a PLEDGE(as is the case with donor 16084) therefore the system will split the payment during the process and will assign a trantype of 'PP' to the exact pledge amount and a 'PPO'(pledge payment overage) towards the balance. additionally as records get inserted into paytable there is counter of those paytable records going into the appealtable for that particular appealcode so in the case above when batchno 20120808 is completed appealtable.total# will show 103 and total$ will show $2532($10,$12,$10,,,I did not include payment$ since that is not the focus of this issue and will not change).
mgt wants the counter into the appealtable to be 2 instead of 3 records since the two records that were split(same split_transnum) should be recorded as one response not two.
I have tried writing an after insert trigger(dreaded mutating table error) and can't seem to figure out how to update the counter to the appealtable after records are inserted into paytable. below is some code I've been working with but it's not working.
CREATE OR REPLACE TRIGGER PPO_Payment
AFTER INSERT ON paytable
FOR EACH ROW
DECLARE
p_cnt NUMBER :=0;
[Code]...
show errors
I want to update a row in a table say Table A and the updated row should be inserted into another table say Table B. I need to do it in a single SQL query and i don't want to do it in PL/SQL with triggers. And i tried with MERGE statement but its working with this scenario.
(Note: I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0).
The first problem I have is inserting data from one table to another WHILE incrementing a sequence:
Insert into PROG
(prog_cd, nm, typ_id, grp_id, clas_id, cat_id, shrt_nm, fl, prog_id)
values
((select one, two, three, four, five, six, seven, eight from LOAD), prog_seq.nextval);
I want to load the table PROG with the data in LOAD and increment a seq and put the value in prog_id, which is a field in PROG.
When I run it, I get:
ORA-00947: not enough values
For a table tab the values are:
tab
id() value1 value2 value3 vale4 value5
001 state wb
001 year 2012
001 dist kol
001 age 27
Now I want to insert this data in another table tab1 and the output of that table will be
id value1 value2 value3 value4
001 wb 2012 kol 27
find out how i can insert the date like this.
i have 2 identical tables....the trick is with regards to one column say column A,the first table TableA is constantly having data inserted and data updated, what im trying to do is create a before insert or update trigger that looks at column A and if column A=20 it changes this to 5 and inserts this into the tableB, everything else with the exception of Column A will be the same:-
this trigger i have done works but doesnt change the value of column A (INPUT_NADI) as i dont know how to do this:-
CREATE OR REPLACE TRIGGER UPDATE_TRG_NP_NE1_T0
BEFORE INSERT ON TESTNSS.NP_NE1_T1
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO NP_NE1_T0
VALUES
[code]....