How to find whether any character in a string is repeating or not
Eg: '123LH563' should return 'YES' , as 3 is repating there
'1234567' sould return 'NO' as there is no character which is repeating
I am trying to delete duplicate or repeating words in a string using regular expressions (regex) and an Oracle database.I have Googled quite a bit on this topic and was unable to track down something that fit the bill or remotely came close to paying the tip.
A pattern would be: word word start with newThe final string should look like this: word start with new Basically all the strings begin with the two words repeating.
I have one string 'SWAP_20120224_MEGAMART_MAR_Sales.csv'
I want to get the string between second underscore and third underscore i.e. 'MEGAMART'
How to achieve this in sql statement?
I'm facing some problem even after using INSTR function in Oracle.The problem is I have written the logic in the PL/SQL block which appends all the values fetched in a loop on the basis of whether the string is present or not.
For ex:
The first value fetched from the select query first is ABCDEFG which gets appended to a variable
The next value fetched is AB even this has to be appended to the variable since this exactly doesn't match with ABCDEFG.
The next value fetched is BCDEF even this has to be appended to the variable since this exactly doesn't match with ABCDEFG.
The third Value fetched is ABCDEFG this will not get appended presently according to the logic which is correct.
writing that piece of code to append the value fetched which doesn't exactly match with the existing string
how we can discard the last character of a string in sql?
eg: we have a string v_str := 'abcde/xyz/eerr/';
I need to discard the last character '/' from this variable.
Is there any function available to do that?
My requiremnt is that a field must contain on Alpha number value, no specail character allowed, how can we sure by query that string which is going to commit is alphanumeric.
View 2 Replies View RelatedI'm trying to create a table with a select statement. I want to populate this new table with the aggregated value from a VIEW. Following is the code used for creating the VIEW,
create or replace view FINAL_WEB_LOG
as
select SESSION_ID,
SESSION_DT,
C_IP,
CS_USER_AGENT,
tab_to_string(CAST(COLLECT(web_link) AS t_varchar2_tab)) WEBLINKS
from web_views_tab
group by C_IP, CS_USER_AGENT, SESSION_DT;
I want to create a table with WEBLINKS and SESSION_ID which is a sequence from another table.
CREATE TABLE FINAL_WEB
AS
SELECT weblinks
FROM final_web_log
UNION
SELECT session_id
FROM WEB_VIEWS_TAB;
This now gives me the following error,
SQL Error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
This has to do with the field, Weblinks, it does have longer values.
How can I find the last numeric value in the alphanumeric string?
Example:
LS14160220SPAD show me 0
MN23160224N show me 4
SP34524442 show me 2
To built the Pl/SQL function or SQL query to validate the given string for alphanumeric character.
I would pass the string of size 10 character, we need to validate first 5 character as alphabet, next 4 character as numeric and last 1 character as alphabet.
I will pass the each row value to the function, it need to return "T" or "F" based on the condition,first 5 character as alphabet, next 4 character as numeric and last 1 character as alphabet.
Here is the DML and DDL.
[code]
create table abc ( classid varchar(10));
insert into abc values ("abcde1234f");
insert into abc values ("abcde12345");
insert into abc values ("ab1de1234f");
insert into abc values ("abcde1234f");
insert into abc values ("abcd21234f");
[code]
Output:
Input : abcde1234f Output : T
Input : abcde12345 Output : F
Input : ab1de1234f Output : F
Input : abcde1234f Output : T
Input : abcd21234f Output : F
I am using this query to split numeric values i.e ('1,2,3,4,5,6')but when i am trying with char value i.e ('a,b,c,d'), its not working.
select id
FROM employee e
WHERE e.id IN
( SELECT TO_NUMBER(xt.column_value)
FROM XMLTABLE('1,2,3,4,5,6') xt );
I have created and formatted a mini test scenario. Execute the scripts I have below?
From the column adj_second_line, I am trying to clip everything from the characters '201' all the way to the end...or the NUMERIC start value after the word 'TYPE'. Whichever way is easier for you...
create table test_split
(adj_second_line varchar2(80))
insert into test_split
values ('ADJ#1-2G3AYL TYPE 20100501 20100524 0MO/23DY')
insert into test_split
values ('ADJ#2-656GYP TYPE AR 20100522 20100524 0MO/15DY')
insert into test_split
values ('ADJ# 265HKK TYPE X 20100428 20100524 0MO/30HT')
insert into test_split
values ('ADJ#13 43327DR TYPE AJ 20100413 20100524 0MO/30HT')
-- Need to have another column called split_second_half
SELECT adj_second_line,
substr(adj_second_line, 1, instr(adj_second_line, '201')-1) split_first_half,
instr(adj_second_line, '201') clip_from_position
FROM test_split
--Desired output for the split_second_half column
20100501 20100524 0MO/23DY
20100522 20100524 0MO/15DY
20100428 20100524 0MO/30HT
How can we get 'space in every character of a string with Single select query'
for example:-
string 'INDIA'
result should be 'I N D I A'
why the below is not the same?
select * from textsearch where
LENGTH(TRIM(BOTH ' ' FROM Text)) < 1
--0 Rows
select * from textsearch where Text='%';
--12 Rows
I have researched this problem and checked my variable sizes over and over again. I have tested the procedure within the Oracle Express environment and it works fine; HOWEVER, when the procedure is called from my C# app it produces the ORA-06502 error.
The stored procedure signature looks like this...
Original - SQL Code
create or replace save_new_project (p_custorgid in number,
p_title in varchar2,
p_AOIName in varchar2,
p_description in varchar2,
p_receiveddate in date,
p_deadlinedate in date,
p_startdate in date,
[code]....
The OracleParameter in my C# app for the last out param is defined as such...
cmd.Parameters.Add(new OracleParameter("p_statustypedescrip", OracleDbType.Varchar2, 30, ParameterDirection.Output));
As I said at the beginning of this post, the procedure works fine in the Oracle environment. So why is it not working by simply calling it from C#? I've tried changing the OracleDbType to CLOB which eliminates the error but it returns a bizarre result. It returns this string, "Oracle.DataAccess.Types.OracleClob".
Since CLOB doesn't really work either I switch back to Varchar2 and specify a size of 5000 (in the database the field I am querying is defined as Varchar(30)). I still get the ORA-06502 error.
I am clueless as to what the problem is. It should work and it does if I run a series of SQL statements in an Oracle SQL Command window. The test that works fine looks like this...
Original - SQL Code
declare
v_projid projects.projectid%type;
v_statustypedescrip projectstatustypes.type%type; /* this is a varchar(30) */
begin
save_new_project(2, 'Some input text goes here', 'More input text', 'And more again','26-APR-2007','26-APR-2007','26-APR-2007','26-APR-2007','users name as inpujt text
[code]....
But calling save_new_project from C# throws ORA-06502. It identifies line 40 of my stored procedure. This is line 40...
Original - SQL Code
p_statustypedescrip := v_statustypedescrip;
p_statustypedescrip := v_statustypedescrip;
notes column having 2000 characters max, i want my string output based on 35 characters, ya i need to replace tag after 30 characters in the string.. I need out put as "hi hello how are you doing out there, similar i need to calculate the sting length and have to split it 35+35+35..
This i tried
select substr(note,1,(instr(note, ' ',35)))||'
'||substr(note,instr(note, ' ',35),(instr(note, ' ',35)))notes from test
when I want to create a table.When I run my procedure I received :
PL/SQL: numeric or value error: character string buffer too small
create or replace PROCEDURE p_create_tmp_tables (p_result OUT NUMBER ) IS
string_sql varchar2(1000);
result NUMBER;
BEGIN
string_sql := 'CREATE TABLE TMP_CATEGORIES (CODE_CATEGORY NUMBER(6,0), NAME_CATEGORY VARCHAR2(25 BYTE))';
execute immediate string_sql;
[code]...
I am trying to execute this
begin
-- Initialize owa with an empty array, just so we can use htp.
owa.init_cgi_env( param_val=>owa.cgi_var_name );
-- Add a header to avoid dealing with header-related code in htp.
htp.prn('Content-Type:text/plain');
htp.print('');
[code]....
The error I am getting is
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "SYS.HTP", line 1550
ORA-06512: at line 32
what i feel is that oracle Database UTF8 or AL32UTF8 characterset does not support htp package properly. When i run the code on another characterset, it runs errorfree except in UTF8 or AL32UTF8.
Where I am copying the data from one database to another I am getting this error.
ORA-01458: invalid length inside variable character string
This is applicable for only character string.
The source Database is
Oracle9i Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE 9.2.0.8.0 Production
TNS for HPUX: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
The destination database is
Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
PL/SQL Release 9.0.1.1.1 - Production
CORE 9.0.1.1.1 Production
TNS for 32-bit Windows: Version 9.0.1.1.0 - Production
NLSRTL Version 9.0.1.1.1 - Production
Actually I am getting the following error while running my script.
Error:(Error): ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at line 9
Seems to be getting eror in the following line but not sure why its coming."select adary.dilution_strategy_seq.NEXTVAL into :dil_strat_seq_new from dual;"
Code snippet:
---------------------------------------------------------------
declare
dil_strat_seq_new NUMBER :=0;
disc_conc_seq_new NUMBER :=0;
disc_fold_seq_new NUMBER :=0;
begin
[code]...
i am getting above error while doing
ORA-06502 numeric or value error: character string buffer too small
ORA-06512 itw_item_add_ch at line 17
CREATE OR REPLACE procedure itw_item_add_ch (header_id1 number, folio out varchar2,tariff out varchar2) as
cursor item_add(header_id1 number) is
SELECT
DISTINCT c.attribute4 item_tariff_no,
c.attribute5 item_folio
FROM OE_ORDER_LINES_ALL b,
[code].....
Following are my declarations and query inside my procedure.i am getting "ORA-06502: PL/SQL: numeric or value error: character string buffer too smal" error when i try to execute the procedure
code :
request_owner request.SCC_USER_ID%TYPE := NULL;
receipt_location request.RECEIPT_LOCATION_LKP_ID%TYPE := NULL;
receipt_type request.RECEIPT_TYPE_LKP_ID%TYPE := NULL;
item_id request.ITEM_ID%TYPE := NULL;
[code]...
I am learning pl/sql and this is procedure i had created which got created successfully.then i created two variables name v_name, v_loc with command.
variable v_name varchar2; etc.
and executed procedure like
execute dept_proc2(10, :v_name, :v_loc);
and i am getting the error
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
1 create or replace procedure dept_proc2
2 (v_dno in number, v_name out varchar2, v_loc out varchar2)
3 is
4 cursor dept_cur is select dname, loc from dept
5 where deptno=v_dno;
[code]...
Actually I have an existing table in LOG RAW instead of BLOB. Which stores some transaction XML data. The data is very huge. When i trying with the following, gives me following error
SQL> declare
2 a varchar(255);
3 B LONG RAW;
4 cursor c1 is select xml FROM LOG_tab WHERE ID='13148' ;
5 begin
6 open c1;
7 loop
8 fetch c1 into b ;
[code]....
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 10
Since dbms_output.put_line has buffer limitation.Can we write the result of a select statement into client LOCAL disk files using PL/SQL.
I am getting an error as below
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
Here is complete code
CREATE OR REPLACE
TYPE MDI.ACCUM_STRING_TYPE2 AS OBJECT (
rvalue VARCHAR2 (32767
STATIC FUNCTION odciaggregateinitialize (sctx IN OUT accum_string_type2)
RETURN NUMBER
[code]...
ORA-00604: error occurred at recursive SQL level 1
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at line 8
I am reexecuting this view:
set serveroutput on buffer 2560000
;
CREATE OR REPLACE VIEW VIEW_TRIP_ASSIGNMENTS
(COMPANY_ID, TRIP_ID, TRIP_STOP_ID, TRIP_CODE, TRIP_NAME,
TRIP_DESC, TRIP_NUMBER, TRIP_START_TIME, TRIP_END_TIME, TRIP_LOADING_TIME,
TRIP_UNLOADING_TIME, FREQUENCY_ID, FREQUENCY_CODE, FREQUENCY_NAME, FREQUENCY_DESC,
FREQUENCY_CODE_NUMBER, CUSTOMER_ID, CUSTOMER_NUMBER, CUSTOMER_NAME, CUSTOMER_DESCRIPTION,
CUSTOMER_TYPE_ID, CUSTOMER_TYPE_NAME, CUSTOMER_TYPE_CODE, DAY_PHONE_NUMBER, EMAIL_ADDRESS,
CONTRACT_ID, CONTRACT_NUMBER, CONTRACT_DESCRIPTION, WORK_LOCATION_ID, ROUTE_ID,
[code]....
before reexecuting above view I was counting the column and was getting below error:
ora-00600 internal error code,arguments:[qctopn1], [],[],[]...
Is there a method or a tool out there that can do a search through an Oracle Schema to find objects ( tables, fields, stored procedures, etc) containing a specified character pattern ? For example : I would like to return all of the tables that contain fields containing the character string "ABC"
View 1 Replies View Relatedi am generating html format mail from oracle 10g database.
For displaying data into html format, message body data is exceeding more than 32k.
ORA-06502: PL/SQL: numeric or value error:character string buffer too small
i am using long data type for message body data.
I want to insert data into a RAW column in a table. The below code snippet is used for the same
OCIRaw **l_rawPtr = new OCIRaw*[10];
for(int i=0;i<10;i++)
{l_rawPtr[i] = NULL; }
int max = 0;
for(int i=0;i<10;i++)
{
OCIRawAssignBytes(l_environment, l_error, l_char, strlen((const char*)l_char), &l_rawPtr[i])
[code].....
When the statement is getting executed, i am getting the following error. Error - ORA-01458: invalid length inside variable character string
Trying to learn and understand Triggers, PL/SQL code, etc. When I execute a simple insert using Toad for Oracle, all is fine. When I try the identical insert in SQL*Plus, it throws error ORA-06502 during execution of the trigger.
Here is the error info:
insert into AAAJOB(PROCEDURENAME,DESCRIPTION) VALUES('OOO','PPP')
*
ERROR at line 1:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small
ORA-06512: at "PMSC0.AAAJOB_TIMING", line 10
ORA-04088: error during execution of trigger 'PMSC0.AAAJOB_TIMING'
===
Here is the table and the trigger:
CREATE TABLE PMSC0.AAAJOB
(
CREATETS TIMESTAMP(0) DEFAULT current_timestamp,
PROCEDURENAME VARCHAR2(100 CHAR),
DESCRIPTION VARCHAR2(100 CHAR),
LASTUPDATEDBY VARCHAR2(9 CHAR)
)
[code]....
The error seems to be on this:
SELECT current_timestamp
INTO :new_row.createTS
Below is a column 'ADDR' with the data (single column)
ADDR
--------
/shared/Folder_1 :^BIAdministrator:^BIAuthor:^BIConsumer:BISystemUser:OracleSystemUser:System:weblogic: :F
[Code]....
