I am passing a string from vb.net through oracle store procedure. String consists of varchar values for eg '123456;I|N,2424424;O|A'. But how can i call these string values into array using oracle stored procedure? After getting these values into array , i wanted to loop through these values.
I have created a stored procedure that checks if a file exists and gets a date from the file if it exists. The date is then used as a paramter. See below:
CODEcreate or replace PROCEDURE "P_Load_Stamp" AS v_exists BOOLEAN; v_length NUMBER; v_blocksize NUMBER;
[code]...
The above codes works perfectly and I scheduled it using SQLPLUS as follows:
CODEvariable jobno number; variable instno number; begin select instance_number into :instno from v$instance;
[code]...
My problem is that I need to pass the date from the above procedure as a parameter to another stored procedure. So I modified my code as follows (the parts in red):
CODEcreate or replace PROCEDURE "P_Load_Stamp" (vCTIDATE OUT varchar2) AS v_exists BOOLEAN; v_length NUMBER;
[code]...
Now it doesn't strike me as a rights issue since I created it in the schem schema. What could I be doing wrong here?
i have a stored procedure whose input parameter is a varchar2 datatype.i created this procedure for an interface and tibco would be calling my procedure by passing input parameters.my problem is when there is a input string with & (ambersand) then its not working.
even i tried to pass the parameter with & in TOAD, it asks me to enter value for string.look at the sample code below which i wrote for testing purpose:
procedure is:
create or replace procedure testproc(p_in in varchar2) is begin null; end;
i pass parameter as given below:
begin testproc('abc & def'); end;
if i run above script, it asks me to input some string value as it sees & in the string. attached is the image that shows up in TOAD. if i run below script it works. but i dont know how many &'s will be there in the input parameter. hence i cant do. and also TIBCO cant modify the input paramter while calling the procedure.
Requirement is to build procedure where it has 10-12 input variables but some of them (input variables) may at times be NULL.Based on this, i thought of getting into EXECUTE IMMEDIATE but this would just return rows i mean DML stmt for EXECUTE IMMEDIATE.Also, on the requirment is all parameters are present then result set be based on range on start and end date.
CREATE OR REPLACE PROCEDURE SCOTT.GetEmpList(p_recordset OUT SYS_REFCURSOR) AS BEGIN OPEN p_recordset FOR SELECT * FROM scott.emp WHERE deptno=10; END GetEmpList;
Now i would like to execute this procedure in sqlplus which will display the following:
EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO 7782 CLARK MANAGER 7839 6/9/1981 2450 10 7839 KING PRESIDENT 11/17/1981 5000 10 7934 MILLER CLERK 7782 1/23/1982 1300 10
I just started to play with this system and don't understand how to execute the the stored procedure (that creates report) from the APEX page. I know that they have sample documentation and java script call (show below):
<script language=”JavaScript” type=”text/javascript”> function callMyRep() { var formVal1 = document.getElementById(’P_PAR1′).value; var url; url = ‘rep1?p_session_id=&SESSION.’+'&p_par1=’+ formVal1; window.location.href=”f?p=&APP_ID.:12:&SESSION.”; w = open(url,”winRep”,”Scrollbars=1,resizable=1,width=800,height=600″); Close here. X [code]....
In this example rep1 is the stored procedure that creates report.How can I execute it using url?
I would like to create a trigger that will execute a stored procedure when a package/function/procedure is compiled. I tried creating an update trigger on user_objects, but it statues aI cannot create that trigger tyoe on views.
I have wrote a Stored Procedure Function that get all the rows from a Staging Table and assigns it to a CLOB and returns the CLOB. The issue is I'm getting the dreaded
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "F_CLOB_TEST", line 21 ORA-06512: at line 7
The error does not occur when I remove the 'PRC_ID', 'S_FIL_NAME' & 'exportDt' from the query. It works fine. The PRC_ID has data such as "700$702$7 05$706$707$708$709$710$711$712$713$714$715$294404$294405$294407$294408$294409$294410"
and S_FIL_NAM is the same for all columns - "SBENE_FILID810-2010-04-07-10.59.17"
The query returns 829 rows. Also I have to include a few more columns in the query which have data larger than the 'PRC_ID', but I have not included them here in the sample code, as this code by itself returns the ORA-6502 error.
create or replace FUNCTION "F_CLOB_TEST" (job_id in Number) return clob is c_clob clob; [code]....
Procedure: CREATE OR REPLACE procedure test (a number, b varchar2) is
begin dbms_output.put_line(a ||'->'||b); end;
Anyonymous Block:
begin exec test(1,'m'); end; / When i run this i am getting this error ORA-06550: line 2, column 7: PLS-00103: Encountered the symbol "TEST" when expecting one of the following [code]...
I have a update statement that works fine when its run in SQL window but when i try it as part of a Stored Procedure its giving me the Insufficient privileges error on that table.
If i dont have privilege to update that table wont it not let me update while doing it outside the stored procedure as well?
I have written a stored procedure that has started returning the error:
Error starting at line 1 in command: call p_glpost('DSTUK', 'L', '2008-01-01', '2008-01-01', '2011-02-18', 1, 1, 1, 0, 'Hi there')
Error report: SQL Error: ORA-06502: PL/SQL: numeric or value error: character to number conversion error ORA-06512: at "CLARITY.P_GLPOST", line 173 06502. 00000 - "PL/SQL: numeric or value error%s"
I can't seem to find a tool that will let me step into the actual stored procedure line by line to see where the error occurs. It mentions line 173, which seems to be a red-herring, as line 173 is simply one of the 'END IF' lines within this block:
IF NVL(r_dist.transtype,'wild') = 'wild' THEN NULL; elsif r_wip.transtype = r_dist.transtype THEN v_matchCount := v_matchCount+1; elsif r_wip.transtype <> r_dist.transtype THEN [code]......
Tell me if it is possible to trace through a SP, and which tool is best (I am trying to use Oracle SQL Developer).
I am trying to perform a dml operation(insert) to insert data into a table. I created a procedure in which a insert statement is generated. In another procedure I am trying to execute this auto generated statement using execute immediate. For that I created 2 variables . First one contain the insert statement and other one contain the list of columns. I m passing these strings to execute immediate like this
Execute Immediate(v_query) using(v_col_list)
after execution i m getting the following error
ORA-01008: not all variables bound ORA-06512": at ' db_name.load_data' , line no 217
but when i tried it with list of column into using clause it is working like
Execute Immediate(v_query) using col1,col2,col3
I have more than 150 tables in the schema and i am creating a single procedure to load the data into base tables by using external tables. By passing the table name to procedure it generates the update and insert statements but i am getting error while executing the statements with dynamic sql.
i need to pass table as input parameter in stored procedures. during the run time, i am getting error
CREATE OR replace TYPE emp_type IS OBJECT ( id NUMBER(4), ename VARCHAR2(10)); CREATE OR replace TYPE emp_type_tab IS TABLE OF EMP_TYPE; CREATE OR replace PROCEDURE Test_proc (in_emp_type IN EMP_TYPE_TAB) AS BEGIN FOR i IN 1.. in_emp_type.COUNT LOOP dbms_output.Put_line(in_emp_type.Id(i)); END LOOP; END; /
All these stored procedures deals with insert/updated transactions . i need to create a new stored procedure to execute all this in a single stored procedure which will be something like
create procedure sp4(param1...param8) as begin Execute sp1 param1...param6 rollback if any error Execute sp2 param1...param8 rollback if any error Execute sp3 param1...param4 rollback if any error end;
I want to execute a dynamic query which is stored in a Table.
Output of that query should be stored in database server.
Is there any way i can create a dynamic procedure? I have created a sample code but issue is i cannot make the below data type dynamic as per the query.
en com_fund_info_m%ROWTYPE; CREATE TABLE TEMP (SQLSTATEMENT VARCHAR2(100)) DECLARE TYPE r_cursor IS REF CURSOR; c_emp r_cursor; en com_fund_info_m%ROWTYPE;
declare cursor c is select employee_id from employees; type nst_type is table of employees.employee_id%type; emp nst_type; begin open C; loop exit when C%notfound; fetch c bulk collect into emp; end loop; close c; end;
Above is the sample code, and now i want to pass 'emp' as an input parameter to the procedure.
How can I do that, as emp is of nst_type type and I do not know how my procedure will recognize the datatype...
I am trying to pass many characters to the in mode parameter using procedure , but i am getting the below error.
ORA-06550: PLS-00172: string literal too long
CREATE TABLE USR_DETAILS ( LOAD_ID NUMBER NOT NULL, LOAD_DATE DATE, USER_VALUE VARCHAR2(4000 BYTE), USERID VARCHAR2(4000 BYTE) ) insert into user_details values('1','2/10/2011','PROD1','USER1'); insert into user_details values('2','2/10/2011','PROD2','USER2'); [code]......
I have written the code as below...
Procedure concept :
Here i will seperate the strings(input parameters) using comma(,) symbol . Here users may pass more than 5000 characters to single in mode parameter, so i have tried with clob datatype but no luck.
CREATE OR REPLACE procedure user_details_proc (user_value1 IN varchar2, user_value2 IN varchar2, user_value3 IN varchar2, user_value4 IN varchar2, user_value5 IN varchar2, userid IN varchar2 ) as [code].......
I have one procedure , which calls the DBMS_scheduler.run_job , which calls the Shell Script. now based on the shell execution i need to return the message lines to procedure.
