create or replace procedure my_proc(p_user in varchar2) is
l_cursor sys_refcursor;
l_query constant varchar2(1000) :=
'select a'
|| 'from ' || p_user || '.user_table'
|| 'where param0 = :x'
|| 'and param1 = :x'
|| 'and param2 = :x'
[Code]...
Suppose I execute my_proc many times and for multiple values of p_user. For performance reasons, will l_query be stored in the cache as I am using bind variables or it will not since I have the concatenation with p_user value ?
I am trying to create table using bind variable in EXECUTE IMMEDIATE.. I want to know whether oracle allows to create table using bind variable in EXECUTE IMMEDIATE..
Following is the example :
Declare test_tab varchar2(10) := 'tab_test'; sql_stm varchar2(100); Begin sql_stm := 'create table ' || :a || ' (col1 NUMBER)'; dbms_output.put_line(sql_stm); EXECUTE IMMEDIATE sql_stm using test_tab; Exception WHEN OTHERS THEN dbms_output.put_line(sqlerrm || ' ' || sqlcode); End;
After running above block it is giving error : ORA-01008: not all variables bound.
Which of the below is considered a bind variable. In example one proc. Test the parameter p1 is directly used in the query, so this can be considered as a bind variable.
Is that true about the second proc. where p1 is assigned to a local variable v1 , or this needs hard parsing because v1 is not a bind variable ?
Create or replace procedure test(p1 IN VARCHAR2,p_refcursor OUT SYS_REFCURSOR) IS BEGIN OPEN p_refcursor FOR select * from Test_tab WHERE item=p1; END; ------------ Create or replace procedure test1(p1 IN VARCHAR2,p_refcursor OUT SYS_REFCURSOR) IS v1 varchar2(100):=p1; BEGIN OPEN p_refcursor FOR select * from Test_tab WHERE item=v1; END;
I have written a small code while going through the PL/SQL guide but I got a message for the BIND VARIABLE. I don't think I have used any bind variable in this code.
<<outer>> declare v_sal1 number(7,2) := 60000; v_comm number(7,2) : v_sal1 * 0.20; v_message varchar2(2000) := 'eligible for commission'; begin [code]........
Create and invoke the GET_JOB function to return a job title. a.Create and compile a function called GET_JOB to return a job title. b.Create a VARCHAR2 host variable called b_title, allowing a length of 35 characters. Invoke the function with job ID SA_REP to return the value in the host variable, and then print the host variable to view the result.
This is my FUNCTION: CREATE OR REPLACE FUNCTION GET_JOB( p_jobid IN jobs.job_id%TYPE) RETURN VARCHAR2
[code]...
This is how I invoked the FUNCTION but WHILE DECLARING THE BIND VARIABLE IT IS GIVING ME AN ERROR!!!!!
VARIABLE b_title VARCHAR2(35) set serveroutput on DECLARE P_JOBID VARCHAR2(10); v_jobtitle VARCHAR2(200);
I have a requirement where I have to return data as per filter clauses provided on the front end, which may or may not be filled as per the users' choice.
To create a test case, I have created a query joining the emp and dept tables and I add the where clauses dynamically depending on whether the filter has been provided or not.
CREATE OR REPLACE TYPE emp_ot AS OBJECT ( empno NUMBER(4), ename VARCHAR2(10),
[Code]....
It works very well, the 'literals' are being converted into bind variables (due to CURSOR_SHARING being set to SIMILAR) and the optimizer is able to figure out the correct execution path every time, although it is true that potentially 5 versions of this query will be sitting in the shared pool, but the DBAs are happy to live with that.
Going forward in version 12, CURSOR_SHARING=SIMILAR will be deprecated and the DBAs are not happy for us to write this sort of code anymore.
Is there a suitable way to achieve what this piece of code does?
I have tried and tested this method: SELECT emp.empno, emp.ename, emp.job, dept.deptno, dept.dname FROM emp, dept WHERE emp.deptno = dept.deptno AND emp.empno = NVL(p_empno, emp.empno) AND emp.ename LIKE NVL(p_ename, emp.ename)||'%' ...
but the query takes far longer to execute in this manner (that is using my real tables).
CODE Select Nvl(Sum(DbAmt),0), Nvl(Sum(CrAmt),0) From FnTrantt A Where A.GrpCode=:1 And A.CmpCode=:2 And'; A.DiviCode=:3 And'; A.SubDiVCd=:4 And'; A.FinYear>=''0001'' And'; A.VchDate Between :5 And :6' And A.GlCode In :7; [code]....
In The Above mentioned Code, am using bind variables, In variable no. 7 in passing character string ('05124','05125')I am not able to fetch the value,
i have been looking at a query that uses a wrong plan. db=11.2.0.3 with user bind peeking enabled. this is a simplified version demonstrating the problem:
select egp.bsn,egp.klantnummer as "Persoonsnummer", egp.samengesteldenaam as "Samengesteldenaam", egp.geboortedatum as "Geboortedatum"from pr_eigenschappen2 egpwhere(egp.bsn = :b1 or :b2 is null)and rownum < 51 egp.bsn is varchar2(10) and has high selectivity (almost unique), and is btree-indexed. table and index have adequate statistics. when run with b1:=928818 and b2:=928818 (both bound as varchar2(10)) a full table scan+filter is used on pr_eigenschappen2. if the query is changed to select egp.bsn,egp.klantnummer as "Persoons nummer", egp.samengesteldenaam as "Samengesteldenaam", egp.geboortedatum as "Geboortedatum"from pr_eigenschappen2 egpwhere(egp.bsn = :b1 or 928818 is null)
and rownum < 51the index on bsn is used, and the query is not taking 3.9 seconds but 1 millisecond.if i would have a choice, the query would be different. i don't want to talk about the raison d'etre of the query, i would like to know why the optimizer is not using the index in the first case.
We have recently upgraded application (from Oracle Applications 11.5.9 to 12.1.3) and database (from 9.2.0.5.0 to 11.2.0.3.0).Since we are confronting to performances issues, i try to analyse some queries which Explains plans seems strange (in my opinion).Studying one of them i discover the next case (which according to my logic, i can't explain): --
Just bind variable --select *from MTL_MATERIAL_TRANSACTIONS mmtwhere 1 = 1and mmt.INVENTORY_ITEM_ID = :p1and mmt.ORGANIZATION_ID = :p2and mmt.TRANSACTION_REFERENCE = :p3--and mmt.SUBINVENTORY_CODE = :p4 PlanSELECT STATEMENT ALL_ROWS Cost: 5 Bytes: 361 Cardinality: 1 2 TABLE ACCESS BY INDEX ROWID TABLE INV.MTL_MATERIAL_TRANSACTIONS Cost: 5 Bytes: 361 Cardinality: 1 1 INDEX RANGE SCAN INDEX XXSPE.XXSPE_MTL_MATERIAL_TRANSAC_N99 Cost: 3 Cardinality: 2-- Nvl on bind variable --select *from MTL_MATERIAL_TRANSACTIONS mmtwhere 1 = 1and mmt.INVENTORY_ITEM_ID = :p1and
I am trying to create a collection using bind variables in APEX 4.1. I have the following procedure but all I get is an error in the debug page DOH ORA-20104:
create_collection_from_query_b Error:ORA-01006: bind variable does not exist
Am using Oracle 9i and developing stored procedures in SQL Developer. Have a situation where one stored procedure A is calling another B. Stored proc B builds the SQL based on parameters passed in. For one of the parameters i would like to use a bind variable in the SQL that proc B builds. The bind var is passed back to proc A as a part of the SQL string. In proc A, i then try to bind that variable to a parameter(value), however, the bind does not seeem to work.
The SQL string contained in v_SQLStatement defined as VARCHAR(4000) that is passed back to proc A looks like:
SELECT em.event_title AS event_name, e.start_date AS start_date, e.end_date AS end_date FROM d_event_ml em inner join d_event e ON em.event_id = e.event_id WHERE em.language_id = 46 AND e.end_date >= SYSDATE AND e.stream_id IN ( :v_x1 ) AND e.event_id IN (SELECT event_id FROM d_events_seas [code]....
and o_EventList is defined as REF CURSOR. i'm experiencing is that :v_x1 stays as :v_x1 and does not change.This is my first attempt at using bind vars. URL....
I have two procedure , from first procedure having some ref cursor output.
from second procedure I need to call first procedure and i need to process ref cursor output from first procedure so I decide to use bind variable to process ref cursor output but it showing error .
can I define bind variable inside the procedure , then how can I define it .
SQL> CREATE OR REPLACE PROCEDURE emp_by_job ( 2 p_job VARCHAR2, 3 p_emp_refcur OUT SYS_REFCURSOR 4 ) 5 IS 6 BEGIN
ORA-06502...I have database on oracle 9i on Solaris 9. I create a generate procedure that create dynamic procedure through DBMS_SQL. On this database I got the ORA-06502 error. When I tried to run the same procedure on the same database on oracle 8i on NT this work fine.
I have to use bind variable for dynamic sql in a procedure. Is there a way to have control on these values. Say for example:
Procedur MyProc ( In_EmpID Number default null, In_EmpName Varchar2 default null, in_JoinDate Date default null [code]....
I have more than 5 In parameters, all 5 is not compulsory by default they are null and sql formation is also dynamic with in the procedure.I need to map bind variable to a proper one.. Is there a way to handle bind variable.
I need to create a procedure which inserts values from a temporary table into the main table the columns names in temporary table are same for all temporary tables only the table name will be replaced the skeleton procedure code will look like this.
create or replace procedure load_data as
select c_tables is select table_name from user_tables where table_name like 'TEST%'; V_tbl varchar2(30); BEGIN OPEN C_TABLES; LOOP FETCH C_TABLES INTO V_TBL;
[code].....
The logic here is to insert values from v_tbl variable table into sales_target table.
when I compile it doesn't like using V_TBL variable in the procedure?
PROCEDURE CALCULATE_CASH_REBAL( P_Account_id IN VARCHAR2, P_Txn_Ccy IN VARCHAR2, P_Allocation IN VARCHAR2, l_lty_id IN VARCHAR2 ) IS l_balance_fmt NUMBER := 0; BEGIN [code]....
it should be updating l_balance_fmt field for all the records in the loop. my question is when it loops to the next cash txn record, will it take the previous value of l_balance_fmt ? it should start again and take 0 as the balance_fmt and add to that..
I'm trying to execute a procedure within a Declare/Begin/End statement and using variables as input parameters in my procedure but I keep on getting an Invalid SQL Statement Error. My code is below:
declare
START_dt VARCHAR2(30); END_DT VARCHAR2(30);
begin
SELECT '01-APR-2011' INTO END_DT FROM DUAL; [code]....
The table the procedure is pulling data from doesn't have proper date/time stamps but my procedure takes the varchar dates above and turns them into dates in the procedure so the input date parameters are left as just string characters.
I am about to pass 1Z0-051 and have been cramming. Ran across this scenario: Create or replace view. Correct answer: allows insert from view in multitable insert statement. Can I actually insert data from a view? My understanding is no data actually exists in a view. This has created a cavernous feeling of inadequacy.
I have make a new trigger.Create a trigger that inserting a new job_id MAX_SALARY assigned as the employee's salary more than 80 departmental charges
I have that code, is that correct?
CREATE OR REPLACE TRIGGER TR27 AFTER INSERT ON JOBS FOR EACH ROW BEGIN (SELECT MAX(SALARY) FROM EMPLOYEES WHERE DEPARMENT_ID=80); :NEW.MAX_SALARY := :OLD.MAX_SALARY; END;
is it possible to create tables using variables in pl/sql such as the following example which is actually in php. i would like to create a table dynamically.
$create_samp_table = CREATE TABLE $MCSCHEMA.".$samp_id." AS SELECT * FROM $MCSCHEMA.".$samp_src_table." WHERE ROWNUM = 0
CREATE OR REPLACE TRIGGER T_HST AFTER INSERT On HST FOR EACH ROW DECLARE Begin INSERT INTO HST (EMP_NO, START_DATE ) SELECT EMP_NO, SYSDATE FROM HST WHERE EMP_NO = :NEW.EMP_NO; End T_HRS_SAL_PERIOD_HSTY_UPD_PRI; /
when I insert a new record in table HST I get this error:
ORA-04091: table HST is mutating, trigger/function may not see it ORA-06512: at "T_HST", line 3 ORA-04088: error during execution of trigger 'T_HST'
i try to make trigger to execute immediate create or replace view
( CREATE OR REPLACE TRIGGER xxxx BEFORE INSERT ON table1 REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW declare l number ; v_ddl varchar2(4000); v_job number; [code]....
it give me error for insuffition privilage in execute immediate and after i make GRANT CREATE ANY TRIGGER TO user give me error can't commit in trigger.
create or replace trigger aifer_transfer after insert on transfer for each new row begin
UPDATE Account SET balance = balance-:new.amount WHERE acc_id = from_acc_id; UPDATE Account SET balance = balance+:new.amount WHERE acc_id = to_acc_id; end if; end; create or replace trigger bifer_transfer before insert on transfer for each new row begin if get_balance(:new.from_acc_id) < :new.amount then raise_application_error(-20001, 'Not enough money in account!'); end if; end; create or replace function get_balance(p_acc_id in number) return number as v_balance account.balance%type; begin select balance into v_balance from account where acc_id = p_acc_id; return v_balance; end; select get_balance(123) from dual..................................................i am geting this error when executing the trigger..................................................Error report:ORA-01912: ROW keyword expected01912. 00000 - "ROW keyword expected"*Cause: keyword missing*Action:
