I made a report that has a report wizard option 'Paper Layout only'. As I finished that, suddenly I realized that I must have to run it also in web. So I must have choose the options both 'paper layout and web layout'.
How can I do that or is it possible to do that without repeating everything that I have done?
I have Report in RB 10g , it is showing the logo in PRINT View but when I am running the report in the paper layout it does not showing the logo over there
View 1 Replies View RelatedI created a report ...whcih i complied and run on paper layout form.. it shown me on correct dta..but i change change layout size and postion on that viewer..
is it avoidable....if yes, then how ?? I wantto lock these object while previewing...
I understand when I decrease the width or height of the paper layout, it may cause this error if any of the objects in my report may not fit in the new layout.
But for me this error occurs even when I increase the size of my report paper layout!
Can we apply both below methods to call paper layout or web layout
1. WEB.SHOW_DOCUMENT()
2. RUN_REPORT_OBJECT()
Or else web layout reports call only from one of them?
Currently am facing a strange issue with reports 10g.I modified the existing report in the server by removing all the exisitng layout fields(10) and adding only one field.
I deployed this in the server and tried to execute the report from UI(OTM). I can see the report is getting called(observed this by adding new SRW messages). but showing the old layout only with 10 fields in it.
I have made a report with the layout in report it self only.but its showing error
REP-1219: 'F_27' has no size -- length or width is zero.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1219: 'F_27' has no size -- length or width is zero.
if have tried to solve this but it showing error for other field a same error. i am sending a my rdf .
I have test in the main section of the layout in forms. I want to print the footer on the first page only. If I go to properties and select print object on first page, it still prints the footer in all pages. How can I force the footer on the first page only.
View 1 Replies View RelatedI have a report with matrixs group, when I try to add a new group in a new level, I get this message :
REP-1108 : Cannot fit default layout even in region extending to page boundaries.
How can I increase the layout in 10g?
I am working on modifying various existing reports that other developers have created in the past. I noticed that on some of the layouts I am able to move frames and other objects by very small increments.
Yet in other reports if I try to move something just a tiny but up or down for example, it moves it by a very large increment. Is there some way, or some setting I need to set, in order to be able to move objects by smaller increments?
Im using forms & reports 6i and 10g. I migrated a form from 6i to 10g.The form is working fine, But Im facing problem in report output.When i try to run the report in oracle 10g web layout. It shows error message.
Terminated with error: <br>REP-1247: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL.
When i already compiled the report so many times.
ctrl+k
ctrl+shift+k
ctrl+s
But still got the same error message.
I want to create a report by using one field and one text as columns name in layout but display the all the columns. I mention the 5 column names in query.how can I write function in summary column.
View 4 Replies View RelatedHow to set papaer margin in reports 6i for example i use continue paper sheets on my printer i set paper margin 4 x 4 paper width 4 & papaer length 4 i want that after running report paper only eject as paper size 4 x 4 not whole paper.
View 1 Replies View RelatedI have a dot matrix printer (Epson LQ-2180, which is a tractor feed printer). While printing a report which contains cheque information. Now while displaying the report it display in correct size but while I print the report by default it takes printer page size and print in that paper size. I want to print the report in cheque size with continuous sheet with more than 900 cheque which defined in report property.
I want that the printer should print exact page length and width what i defined in report.
SQL
SELECT ug_name, rss_user_name
FROM ru_ug
WHERE rss_name = 'EXAMPLE' AND ug_name LIKE 'cn=SNG-PWI11_%'
ORDER BY ug_name
Output
UG_NAMERSS_USER_NAME
cn=SNG-PWI11_DBE_TMM,ou=Netgroup,dc=TMM,dc=netopscn=hostname55,ou=Netgroup,dc=TMM,dc=netops
cn=SNG-PWI11_DBE_TMM,ou=Netgroup,dc=TMM,dc=netopscn=hostname49,ou=Netgroup,dc=TMM,dc=netops
cn=SNG-PWI11_DBE_TMM,ou=Netgroup,dc=TMM,dc=netopscn=hostname19,ou=Netgroup,dc=TMM,dc=netops
cn=SNG-PWI11_I_TMM,ou=Netgroup,dc=TMM,dc=netopscn=hostname932,ou=Netgroup,dc=TMM,dc=netops
cn=SNG-PWI11_I_TMM,ou=Netgroup,dc=TMM,dc=netopscn=hostname56,ou=Netgroup,dc=TMM,dc=netops
cn=SNG-PWI11_I_TMM,ou=Netgroup,dc=TMM,dc=netopscn=hostname77,ou=Netgroup,dc=TMM,dc=netops
But I wish other output:
UG_NAME1 UG_NAME2
RSS_USER_NAME1 RSS_USER_NAME3
RSS_USER_NAME2
Table:
CREATE TABLE RU_UG
(
RSS_USER_NAME VARCHAR2(255 BYTE) NOT NULL,
UG_NAME VARCHAR2(255 BYTE) NOT NULL,
RSS_NAME VARCHAR2(32 BYTE) NOT NULL,
RSS_TYPE VARCHAR2(12 BYTE) NOT NULL,
[code]....
I have a show/hide region of type HTML with empty region source which I use to show/hide a subregion (tabular form)because I don't like the layout of a show/hide region when it is shownthis worked without a problem in APEX 4.1.1
however in 4.2 the tabular form is just a couple of pixels widehave been playing around with grids but can't seem to find the right combination of settingsthe layout is messed up
I put the app on apex.oracle.com :
workspace : xonixrs
login/password : demo/demo
I installed forms builder 6i as I am making a change to a custom form which was created in 6i. When I attempt to use the layout editor, it crashes immediately. The dll module that it seems to get stuck on is uiw60.dll. I have this file on my machine. I added the directory location to the FORMS60_PATH in the registry as it was missing but I am still crashing. The version of 6i I have is 6.0.8.11.3.
View 1 Replies View Relatedin my application i have a requirement as follows
1) column 1 indicator
2) column 2 important.
and the other columns are target actual and current year, previous year and next year.the layout should be in pivot table lay out as follows here the three columns will be saved dynamically as 2012,2011,2013 and the respecitive percentage in target and actual column
current_year previous_year next_year
target 10% 12% 5%
actual 5% 8% 5%
i'm not able to open layout in the custom form.automatically it will be closing and giving this error. Oracle Forms Designer has encountered a problem and needs to close.
View 5 Replies View RelatedI am using Oracle forms builder 10g version. Since last week, I can't open layout editor of any of the forms using my builder tool. I tried rebooting, restoring, creating new form etc. Some times it works, but after a couple of hours the issue returns.
View 13 Replies View RelatedI have .rdf files from mid 1990's ( I'm not sure what is the version, perhaps 2.5 ) and now I would like to modify them by Oracle Reports Builder 6i or 9i. If I try to open those files by Oracle Reports Builder 6i I get the following error message:
REP-0110: Unable to open file 'C:file.rdf'
REP-1070: Error while opening or saving a document
So I made a conclusion that those .rdf files are too old for 6i. Do I need to convert, and especially how, those files? .rdf files where copied from Unix machine to Win XP machine where Oracle Report Builder is installed.
I had a few regions on my page, the 2nd did not start a new row so it appeared horizontally where possible.During some experimentation, I created a new region with a sequence in between that started new row, but even when that region was conditionally never, my original 2nd region started on new row.
Original:
Region 1 - Region 2(empty) - Region 3 (new row/col no)>
New region added:
Region 1Region 1.5 (added, new row)
Region 2
Region 3>
Region 1.5 not shown:
Region 1Region 2
Region 3>
Let me know if you would like a test case for better visualisation.
I'm running a mobile application on a hosted Apex environment which uses lots of jQuery mobile. The environment has been updated to 4.2 recently, and since that happened pages that I had setup to use the content grid, to show content in 3 columns no longer works, there only appears to be 1 column now.
Code as below: -
<div class="ui-grid-b">
<div class="ui-block-a">Block A</div>
<div class="ui-block-b">Block B</div>
<div class="ui-block-c">Block C</div>
[code]........
I wanna convert the amount of money from number to string such as 144.5 to be one hundred forty four point five is there any function or i have to write my function? How could i put new line in the string?
for example if i have 'SAB Bank' || 'Riyadh'
but i want SAB bank to be displayed in line and Riyadh in line.
I have to modify the Form layout of an existing application (Application Express 4.0.2.) where the data for each field is retrieved using SQL statements
Presently the form looks something like this and the Data for each field is rendered properly in this layout:
UNIT # : 123456
ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE:
FIRST NAME: JON LAST NAME: DOEFIRST NAME, LAST NAME and UNIT # are all "Display Only" item type.
What I'm trying to do is to move "FIRST NAME" underneath "LAST NAME" and "UNIT #" next to "LAST NAME" This part is very simple. However, the issue I'm having is as soon as the "UNIT #" is moved next to "FIRST NAME", the data for "FIRST NAME" and "LAST NAME" simply disappear
This is how it looks
ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE:
FIRST NAME: UNIT #: 123456
LAST NAME:
I have played around for hours and even created from scratch a new page with a new form using SQL statements to pull the data for each field, only to get the same result.
how to Run a Discoverer Reports in a Forms Menu.
View 2 Replies View RelatedIs it possible to link to Discoverer Viewer from Forms without requiring the user to log in again. If so, can I then link to a specific Workbook within Discoverer?
View 2 Replies View RelatedWhen running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record.
View 3 Replies View RelatedI need to copy my discoverer report from dev to prod. How should I do this? Are the items created using calculation in the report can also be copied? These items are not present in the folder in discoverer admin.
View 1 Replies View RelatedWhen I try to manage the report the Discoverer application frozen.
View 5 Replies View Related
