Implemented the Golden Gate replication tool? In particular, to replicate data from Oracle to Sybase?
No details are needed, just a quick nod indicating "yes, it has been done successfully".
Below questions are swirling in my mind while doing some research on Golden gate setup and replication
1) Can we put any time delay between source and target, so that the replication data will be applied after some set of time?
2) If I setup the Golden Gate between Oracle as source and SQL server as destination, then how the core of procedures/views/functions/packages will be replicated to SQL server target?
i.e. is only data replicates between the DBs or the other procedures/views/packages.. etc will also be replicated? If not,then do we need the manual involvement to replicate them?
3) Is it possible to replicate the schemas within the same DB using golden gate?
i.e. if TOOLS DB is shaving schemas A and B, can I replicate the A objects to B schema within the same DB TOOLS?
I was planning to a production cut over from Aix to linux .I thought GG as an option so that i can have two DBs run parallel and replicate and do a cutover to linux during the change window.
Now the problem i see is that only half the tables have primary key.. so I THINK golden gate cannot be used an an option.
I want to learn Golden gate from the scratch.
1) Link for downloading golden gate software. I want to use it on oracle 11g on linux (X86). ( I have downloaded fbo_ggs_Linux_x64_ora11g_64bit.zip from oracle.com size 89mb but I'm not sure whether this is the actual version or not!)
2) Easy ,step by step guide to install the software.
3) Documents/link for performing basic operation.
For using replication in our production, here i am testing golden gate as replication tool. I tested all scenario in Uni direction ( source to destination). Now have to test replication with DDL support in Bi-Direction. Not getting any Doc for doing replication in Bi-direction( Two Way). If any one has done the same, then please share limitation of replication in Bi-direction through Golden Gate.
View 7 Replies View RelatedI was trying to test out the bidirectional replication using golden gate 11g . while doing some tests i did find out there are inconsistency in the database.
Scenario:
Database 11gee,Goldengate11g.
Set up a bidirectional replication replication it works fine until i hit the below scenario. I updated 1 record in the source database then i updated same record in the target database . Now i issued commit one by one on both the src/target. Now checking the record in src/target have different values. src containing the value which was committed in target and vice versa in target. leading to data integrity.
How can we resolve the above issues i have tried different options but nothing seems to work till now.
Trying to configure oracle golden gate between oracle 10g and 9i golden gate Manager is not starting
Error in MGR.rpt
Source Context :
SourceModule : [mgr.main]
SourceID : [/home/ecloud/workspace/Build_FBO_OpenSys_r11.1.1.0.0_078_[34085]/perforce/src/app/mgr/mgr.c]
SourceFunction : [param_file_args]
SourceLine : [2854]
2010-10-03 09:27:48 ERROR OGG-00303 Unrecognized parameter (<CODE>PORT).
2010-10-03 09:27:48 ERROR OGG-01668 PROCESS ABENDING.
What is the stream's "tag" equivalent in Golden gate ?My tables are already in GG replication, but i want to do few insert in to source which i dont want to replicate to target.
View 1 Replies View Relatedwhats the meaning of BOUNDED RECOVERY in golden gate. I just know RECOVERY in oracle.. What is the difference when you say BOUNDED RECOVERY.
View 1 Replies View RelatedCurrently we are loading data from oracle to sql server through oracle 11g gateway. during running scripts most of the queries takes a long time to complete. Because of this performance issue, we want to configure oracle golden gate to move data from oracle to sqlserver. whats the difference between oracle gateway & oracle golden gate? both are performing same functionality?
View 1 Replies View Relatedi work in an application that should make the replication from a publusher table to a remote subscribe table, using snapshot,and trigger, replication data of update works perfectly (update,insert,delete), but when i try to add or dropp a clumn in the publisher table, repplication fail, i know that my method d'ont replicate ddl statment like create or alter table, so i would like the better way to do the replication of the ddl statment without loosing tha data in the subscribe table, i'm working with oracle XE,
View 1 Replies View RelatedI am trying to configure Golden Gate but i am running into the following errors while configuring. Given below is the contents of the configuration.
ggssci>edit params mgr
PORT 7809
USERID ggs_owner, PASSWORD ggs_owner
PURGEOLDEXTRACTS /u01/app/oracle/ggs/dirdat/ex, USECHECKPOINTS
[Code].....
How can i add exttrail to a replicate?
View 1 Replies View RelatedI have a table MYTABLE in database mydb1 duplicated via materialized view and materialized view log and refresh_snapshot commands to a MYTABLE on mydb2 database.
I like to duplicate this table MYTABLE to a third database mydb2, using the same method (materialized view and refresh_snapshot command).
Is it possible ? What's hapend to the materialized view log where I launch a refresh_snapshots on mydb2 ? How is this materialized view log truncated ?
I need the steps to replicate one schema to other system. I am using standard edition one 11gR2. Necessary steps to implement (basic replication).
View 2 Replies View RelatedI told about Oracle multi master replication below.
Can I replicate some objects of "X" schema at A server to "Y" schema at B server using MM replication?
I have a table in one database and I want to replicate it in another two databases with materialized views. The refresh may be fast. Is this possible?
View 1 Replies View RelatedLet's say we have Table - A and we would like to replicate specific row transaction to Table B.
Here are the rows in *Table A*
Time: Lets say 15:00
A1 Just Updated @15:00
A2 Just inserted @15:01
A3
B1 - Daily Delete Row -i.e just deleted a while back - Non scheduled process --executed by application @15:02
B2 -
B3 - Daily Delete Row - i.e just deleted a while back -- Non Schduled process --executed by application @15:05
B4 - Just recently purged (As part of 180 Day purge ) - Scheduled process executed by operations team @15:10
B5 - Just recently purged (As part of 180 Day purge ) - Scheduled process executed by operations team @15:10
B6 -Just recently purged (As part of 180 Day purge ) - Scheduled process executed by operations team @15:10
Current Data in Table B (Before Replication) @15:00
A1 (without updates)
A3
B1
B2
B3
B4
B5
B6
Expected rows in Table B (via replication/snapshot/materialized view / or any other method)
*Replication at 15:30*
Table B - Read Only
Expected rows after replication-
A1 -- Newly updated details
A2 -- Newly inserted row
A3
B1 - Daily delete row is expected to be replicated
B2
B3 - Daily delete row is expected to be replicated
***Note row B4 is not expected to be replicated to table B.
Questions:
1) How can we get updates, inserts and daily deletes replicated while ignore large purges?
2) How can large purge changes be reflected in replicated tables as well without deleting daily deletes?
I am converting sybase to oracle database. during the migration, i have small doubt in triggers.
sybase source
create trigger testss_dt
on test
for delete
as
if @@rowcount = 0
return
insert into test
select id from deleted
return
I have converted oracle code here
create or replace trigger testss_dt
before delete on test
for each row
begin
insert into test
values(:old.test);
end;
But i have ignores @@rowcount concepts in oracle. what @@rowcount indicates in trigger?
What would be sybase str(approx_numeric [, length [, decimal] ]) equivalent in oracle.
Sybase call :
select str(10000.5555, 6, 3) as Test.
Tset
-------
10001
i want to migrate sybase stored procedure to oracle stored procedure.
sybase stored procedure:
create proc checkcontract @titleid tid
as
delete from titile where titile_id=@titleid
return 0
we need to migrate this procedure to oracle stored procedure. If we are using return 0 in SP in oracle means, it returns the end of the procedure statements(according to oracle statements). but sybase indicates that return 0 does not return 0 value during the run time. The return 0 implies that SP completed successfully. In oracle, i have converted stored procedure into SP and also stored functions.
Oracle Scripts:
Stored Procedure:
create or replace procedure checkcontract(v_titile varchar2)
as
begin
delete from titile where titile_id=v_titleid;
end;
/
Stored Functions:
create or replace functions checkcontract(v_titile varchar2)
as
return number
begin
delete from titile where titile_id=v_titleid;
return 0
end;
Give the comments which one is correct or accurate.
Oracle SQL developer also recommeds STORED FUNCTION. But in my application code, don't assign any output variable to this procedure. If i am using Stored Functions, we need to assign value and assign the output of the SF. we don't want to change the application code.
Is there any way/ tool to migrate from oracle to sybase with Zero Downtime?
View 2 Replies View RelatedI try to convert sybase raiseerror into oracle raise application error.
sybase code :
raiserror 20100 "can't add a contact number that's in the contact"
oracle
raise_application_error (
-20002, ':can''t add a contact number that''s in the contact');
the sybase error number 20100 unable to use in oracle due to the limitation of error number.RAISE_APPLICATION_ERROR should be negative and between -20000 and -20999.
how to use sybase error number in oracle?
I want to replicate my Oracle XE database in Oracle 10G. Is their a 'simple' way to do that? I know that XE does not have server backup.
View 2 Replies View RelatedI Have one oracle user ABC which is having 10 Tables.
Now i want to create replica of this user XyZ which can access only 5 tables from . This user having All access.
Example :
Any DML changes made in XYZ these changes should be reflected in ABC user. and vice a versa.
How can i achive this in ORACLE DB.
We need to transfer data from oracle 10g to Oracle 9i in the following condition.
There will be two database server , one is online server where online user fill the form which is generated by java, spring , hibernate and using database 10 g. at day end i need to execute a process that transferring data from online server to offline server that is in oracle database 9i. This process is scheduled. Some security reason client do not kept this two database on same network. My challenge is that transfer data from online server to offline server with applying client security norms.I have option like:
1) Using Oracle replication method, creating materialized view on remote server , refreshing it at regular interval. but database connectivity is not contineous, should i go for that ?
2) Write java application on intermediate server where we write process to get the connection of this two database servers. From java application we call the procedure for selecting data from Oracle 10g and insert into oracle 9i database and using flag on both data to identified how many rows are transfered and how many remaining for trasfer.
im trying to migrate Sybase 12.5 to oracle 11G R2 on linux all tables are fine expect one which fails with error
"SQL Error: ORA-01841: (full) year must be between -4713 and +9999, and not be 0
01841. 00000 - "(full) year must be between -4713 and +9999, and not be 0"
*Cause: Illegal year entered
*Action: Input year in the specified range"
i have change the data type from CHAR to VARCHAR2 etc as for the datatype date shows as date on the tool - I'm using sqldeveloper from oracle.
Actually am trying to replicate two db servers from one in hong kong and another in china. when am trying to establish the replication, am getting error 'ORA-04052: error occurred when looking up remote object' like this...
but the same way i have tried in my local network, it is working fine.i have tried schema replication through enterprise manager grid control..
what are the recommended network requirements for implementing Oracle Multi Master replication.
View 1 Replies View RelatedIn Sybase, my application was using system tables to perform application login security. Those tables obviously don't exist in Oracle. I am looking for ways to provide the following functionality in an Oracle world:
1. How to determine 'x' days of inactivity based on "last login date"?
2. How to determine when a new user logs in for the first time and force them to change their password?
3. If we need to reset a users password, how can we require the user to change their password?
4. Is there any other option other than storing a user-id/password in the application code for locking a user's account if their account needs to be locked due to inactivity?
5. In the USER_USERS view there is a status column. What the different status's can be?