RMAN Unique Constraint Violation
Aug 23, 2011
Our RMAN backup failed because of the error:
starting full resync of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/22/2011 22:19:07
RMAN-03014: implicit resync of recovery catalog failed
RMAN-03009: failure of full resync command on default channel at 08/22/2011 22:19:07
ORA-00001: unique constraint (ODBA.DF_U2) violated
Searching metalink, its related to bug 6014994 and the proposed workaround is to delete the constraint:
Cause:
Dropping a datafile from a tablespace followed immediately by adding
another datafile to the same tablespace will cause this Unique Key violation.
Taking a RMAN debug trace will show the file# related to the error
This is reported as bug <<6014994>> Unpublished on Metalink and fixed in 11g
RMAN RESYNC catalog signals DF_U2 violated constraint when a file# is reused in
the same tablespace
Solution
WORKAROUND: Drop df_u2 constraint
where can I delete the constraint, is it possible to do in RMAN or in the target instance?
View 1 Replies
ADVERTISEMENT
Feb 5, 2013
I've set up Oracle Streams replication between multiple N-way zones like this:
CODE------------------------------
Nway1 |Intersect| Nway2
DB1 --|-- DB3 --|-- DB5 DB1, DB2, DB3, DB4 - N-way1
| | | | | DB3, DB4, DB5, DB6 - N-way2
DB2 --|-- DB4 --|-- DB6 DB3, DB4 - intersection zone
| |
-------------------------------
Physically DB1 .... DBN connected sequentially, so I want to prevent segmentation if some DB is unaccessible, but at the same time fight unneeded redundancy which uses too much link bandwidth to send N-1 LCR-s to all members of a single N-way group (so I want to split one big N-way zone into smaller ones and sequentially connect them into chain - it significantly reduces load on link if N is big enough (>10)). Also I want to have 2 DB in intersection zone to prevent single point of failure.
This scheme has one drawback - if change originated on DB3 or DB4, then it will be propagated (more correctly - applied and captured again) to DB5 and DB6 by both DB1 and DB2 (and, as far as I know, I have no means in capture rules to detect state of DB2 from DB1 and vise versa), so on DB5 and DB6 I get:
CODEORA-00001: unique constraint (DUMMYUSR.UNIQUE_RECORDS) violated error
I've set up standard conflict handler for apply process:
CODE
declare
cols DBMS_UTILITY.NAME_ARRAY;
begin
cols(1) := 'no';
cols(2) := 'name';
cols(3) := 'ddate';
dbms_apply_adm.set_update_conflict_handler(
object_name => 'DUMMYUSR.DUMMYTBL',
method_name => 'DISCARD',
resolution_column => 'no',
column_list => cols
);
end;
but it seems that it does not handle uniqueness conflicts. What is the best way to handle uniqueness conflict (is there a better way than to write custom error handler) and how serious is the impact on insert performance of having unique constraint and corresponding error handler. (In real world I will have to deal with tables with metainformation and without any keys).
Also, how to proceed with no error or raise exception from apply error handler with error that caused this handler to run? In oracle docs I can find only example that modifies LCR and runs lcr.EXECUTE(TRUE), but what to do if I don't want to reexecute LCR, but merely check error code and propagate error if it is not ORA-00001?
View 1 Replies
View Related
Nov 5, 2012
drop table t1
/
create table t1
(
id int PRIMARY KEY
)
/
insert into t1
select 1
from dual
union all
select 2
from dual
union all
select 2
from dual
union all
select 3
from dual
/
ERREUR à la ligne 1 :
ORA-00001: violation de contrainte unique (SYSTEM.SYS_C0011990)
how to get the rows that produced the constraint violation ?
View 10 Replies
View Related
May 10, 2011
I have the search screen in my form so after searching if i select the row by using the button it will navigate the first tab page that is "gas" screen here if i tried to change the value like update and save the form it is not allowing me to update the value raising the error message "oracle unable to insert the record". if i see the "display error" in menu it is having the select statement with error "unique key violation error ora-00001".
In save button containe "commit_form"
View 15 Replies
View Related
Nov 16, 2010
We are trying to import data into existing tables in a schema using data pump
However the foreign key tables are being imported first and then the master table data thus violating the constraints
Apparently it seems larger tables are being imported first regardless of referential integrity constraints thus causing constraint violation (contrary to my understanding)
Is it a normal behaviour during data pump import?
Is it possible that the keys being sequence generated are causing this?
As I understand import will commit after each table In that case can we defer commit at all at the expense of large undo, set constraints to deferrable and try the import?
View 3 Replies
View Related
Mar 26, 2007
From a step by step instructions I'm asked to put the following into sql*plus:
CREATE TABLE Lab2Lecturer
(staffNO VarCHAR2(10) NOT NULL,
title VARCHAR2(3),
fName VARCHAR2(30),
[code]...
Then the following:
INSERT INTO Lab2Lecturer
(staffNO, title, fName, lName, streetAddress, suburb, city, postCode, country, lecturerLevel, bankNO, bankName, salary, workLoad, researchArea)
VALUES
('1000', 'Dr', 'Johanna','Santoso',
'3 Robinson Av', 'Kew', 'Melbourne', '3080', 'Australia', 'C', '1000567237', 'CommBank', 65000.00,1.0, 'O-R DB');
and finally,
INSERT INTO Lab2Lecturer
(staffNO, title, fName, lName, streetAddress, suburb, city, postCode,country, lecturerLevel, BankNO,bankName, salary, workLoad, researchArea)
VALUES
('1000', 'Dr', 'Justine', 'Martin', '6 Algorithm AV', 'Montmorency', 'Melbourne', '3089', 'Australia', 'D', '1000123456', 'CommBank', 89000.00, 1.0, 'CBR');
when I try entering in the second one I get an error 'unique constraint violated'.So whats wrong exactly?
View 1 Replies
View Related
Oct 4, 2013
My DB version is
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
These error codes I'm getting in production.First of all, I've no duplicates present in that table for which this error has been raised.I've checked the index and related columns as well. NO DATA is there.So NO CHANCE for unique constraint violation.
SELECT * FROM ORDER_OCC_REQUISITION_X_REF WHERE LAB_ORDER_OCC_TEST_ID IN(SELECT LAB_ORDER_OCC_TEST_ID FROM LAB_ORDER_OCC_TEST WHERE LAB_ORDER_OCC_ID = 7944858);
no rows selected
Now when I'm trying to insert one row inside this table I'm getting this error, as you are seeing no records for this occurrence_id.
SELECT * FROM USER_INDEXES WHERE INDEX_NAME = 'ORD_OCC_REQ_UQ_TEST_IX_04';
--ORDER_OCC_REQUISITION_X_REF (Table name)
--MERGE_DT, LAB_ORDER_OCC_TEST_ID, TEST_ID, ACTIVE_YN (columns for the index 'ORD_OCC_REQ_UQ_TEST_IX_04')
As you can see there is no data then this error should not be raised. Update procedure.
/*******************************************************************************************************************
* Name : UPDATE_REQUISITION_X_REF
* Description : This Procedure update ORDER_OCC_REQUISITION_X_REF table with requisition_id
* that was generated due to merge process.
* In parameters : IN_merge_id NUMBER The order_ref_no of the orders to be merged (comma seperated)
***********************************************************************************************************************/
PROCEDURE UPDATE_REQUISITION_X_REF ( IN_merge_id IN TT_ORD_REQUISITION_WORK_AREA.merge_id%TYPE)
IS
[Code]....
View 8 Replies
View Related
May 14, 2010
I have faced an error as below:-
1 : 23000 : java.sql.BatchUpdateException: ORA-00001: unique constraint (SDS1.PK_EXP_TXT) violated
1 : 23000 : java.sql.SQLException: ORA-00001: unique constraint (SDS1.PK_EXP_TXT) violated
java.sql.BatchUpdateException: ORA-00001: unique constraint (SDS1.PK_EXP_TXT) violated
at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:367)
at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:9119)
[Code] ......
After i check data in all_indexes table, i have found some old data which are belongs to 2008 and 2009. The sample as below:-
OWNER INDEX_NAME LAST_ANALYZED
SDS1PK_ACTION 31-OCT-09 07:04:49
SDS1AK_ACTION 31-OCT-09 07:04:49
SDS1PK_COND 31-OCT-09 07:04:50
SDS1AK_COND 31-OCT-09 07:04:50
SDS1COND_FK1 31-OCT-09 07:04:50
SDS1COND_FK2 31-OCT-09 07:04:50
is it the problem due to the old data not remove from the all_indexes table ?.. if YES is it I have to delete the old data manually from the all_indexes table ?
View 7 Replies
View Related
Jun 15, 2012
I have 3 columns in a table: colX, colY, colZ.
Trying to find a way to prevent duplicates with these, but only if colX is not null.
For example, if there are already values for: colX = 1, colY = 1, colZ = 1
then:
Allowed: colX = null, colY = 1, colZ = 1
Not allowed: colX = 1, colY = 1, colZ = 1
I can't create a unique constraint on these columns because there are many null values for column colX, and as mentioned, when colX is null, colY and colZ can be any values.
I also tried using a before insert trigger to find duplicates before posting and raise an error if found, but this causes an ORA-04091 mutating error since the trigger in the table is referencing itself to check for duplicates.
Also, I know there is something called a function based index, but I cannot use those with my code, so I need another solution if possible.
View 4 Replies
View Related
Nov 4, 2012
I also put in the relevant code in case it's needed.
SQL> @lab_05_01.sql
SQL> -- Oracle Database 10g: Administration Workshop II
SQL> -- Oracle Server Technologies - Curriculum Development
SQL> --
SQL> -- ***Training purposes only***
SQL> -- ***Not appropriate for production use***
SQL> --
SQL> -- This script performs a batch promotion update.
SQL> -- The logic of the updates is not important -
[code]....
View 2 Replies
View Related
Mar 15, 2011
I have disabled the primary key on a table using this...ALTER TABLE C_LOV_BOROUGH DISABLE CONSTRAINT CLOVBOROUGH_PK CASCADE;
but now when I try to insert duplicate value. It gives this error.
ORA-00001: unique constraint (LOT_DBA.CLOVBOROUGH_PK) violated
View 5 Replies
View Related
Apr 30, 2013
about the functionalty w.r.t. unique constraint and Distinct clause. Below is the example which is confusing me lot.
--Below statement will create table and unique constraint
Create Table A (A Varchar2 (10) Unique);
Insert Into A Values (Null);
Insert Into A Values (1);
Insert Into A Values (2);
[code]...
If we are saying each null value is having a unique value, then why oracle distinct showing records.
View 3 Replies
View Related
May 22, 2013
I have a table where I want user to fill in unique values for a field which is easy to do.
Problem is sometimes the values can be null so an ordinary unique constraint does not work because multiple null records. Is there a way of validating only non null values to ensure all data entered that is non null is unique?
View 1 Replies
View Related
Aug 2, 2011
I have created a table below, my TL asked me to create a local unique constraint for the below table.
I went through all sites and could not find the correct solution, how to create LOCAL UNIQUE CONSTRAINT ON SUB PARTITION TABLE and LOCAL UNIQUE INDEX ON PARTITION TABLE. Creating Local Unique constraint should take care of creating local unique index creation.
Unique key columns are DET,GDS,ARRIVE_DT
CREATE TABLE SUB_PAR_TAB
(
ID VARCHAR2(100) NOT NULL,
REGION VARCHAR2(40) NOT NULL,
SOURCE VARCHAR2(80) NOT NULL,
DET VARCHAR2(80) NOT NULL,
GDS VARCHAR2(40) NOT NULL,
ARRIVE_DTDATE,
SYS_SOURCE VARCHAR2(25) ,
[code]........
View 5 Replies
View Related
Aug 3, 2008
I got this error message in my replication environment.
ORA-12012: error on auto execute of job 2182370
ORA-12008: error in materialized view refresh path
ORA-00001: unique constraint (TE.S_TE_MTH_DBASE_SALES_INFO_A_U1) violated
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 189
Materialized view and Base table having only one unique index. There are no referable constraints in my base table. Because source table not refer any other tables.
Even; materialized view log created using rowid because there are no primary key constraints in my base table.When I manually refresh materialized view I got the below error message
ORA-00001: unique constraint (TE.S_TE_MTH_DBASE_SALES_INFO_A_U1) violated
How it's possible? Because there is parent/child relationship in my source table and there is no way to enter duplicate records it's unique index.
View 8 Replies
View Related
Jun 27, 2012
I have in a plsql block somewhere a statement like
INSERT INTO TABLE1( id , col)
SELECT id, col
FROM TABLE2;
This statement returns an error ORA-00001: unique constraint because id is a primary key on TABLE1. I would like to know what is the value of id that raised the exception.
View 15 Replies
View Related
Apr 18, 2010
I have two different java process trying to insert in the same time in the same table for the same trade. The structure of the table Report is
create table report
( TRADE_ID NUMBER,
VERSION NUMBER,
MESSAGE_TIME TIMESTAMP)
There is a unique key on (TRADE_ID and VERSION) So if a new trade_id is inserted, the version is set to 1 and the second becomes 2 and so on. The version is calculated as last version of the trade_id ie. version + 1. It was woking fine till a new Java process was build that fired inserts through ten different java instances at the same time resulting in unique key error. So in detail what is hapenning is if three records of trade_id's comes in at the same time it should allocate versions in a first come first serve basis and there should be three versions of trade id 1,2 and 3. Now due to the multiple instances they all seems to get fired at once and all ending up with version one and thus resulting in unique key constrain error while trying to insert into the table.
View 3 Replies
View Related
Oct 17, 2011
I am trying to import the dump using the impdp utility and followed the below steps I have disabled all the constraints and executed the below command
impdp DIRECTORY=EXPDP_DAILY_BACKUP_DIR DUMPFILE=expdp_QA_full_11102011_214501.dmp
logfile=imp_EXPDP_QA_full_12102011_203254.log remap_schema=prod:prod remap_tablespace=prod:prod
schemas=prod TABLE_EXISTS_ACTION=truncate content=data_only.
but I am getting the below error like this for 1 or 2 tables . and If I import those tables seperately its getting imported successfully. i am not getting the below error always .
ORA-31693: Table data object "PROD"."DAS_ID_GENERATOR" failed to load/unload and is being skipped due to error:
ORA-00001: unique constraint (PROD.DAS_ID_GENERATOR_P) violated
ORA-31693: Table data object "PROD"."TKT_DIST_SRV_STAT" failed to load/unload and is being skipped due to error:
ORA-00001: unique constraint (PROD.SERVER_STATS_P) violated
View 8 Replies
View Related
Aug 14, 2013
Using Oracle 11g, below is the table, partitions, unique and non-unique local index:
CREATE TABLE DOCA( DOCA_ID NUMBER NOT NULL , DOCA_BKG_PAX_ID NUMBER NULL , ROW_PURGE_DATE DATE NULL ,)PARTITION BY RANGE(ROW_PURGE_DATE)INTERVAL(NUMTOYMINTERVAL(1, 'MONTH'))( PARTITION P2007 VALUES LESS THAN (TO_DATE('01/01/2008', 'dd/mm/yyyy')), PARTITION P200801 VALUES LESS THAN (TO_DATE('01/02/2008', 'dd/mm/yyyy')),) TABLESPACE T0; ALTER TABLE DOCA ENABLE ROW MOVEMENT;
CREATE UNIQUE INDEX XPKDOCA ON DOCA( DOCA_ID ASC, ROW_PURGE_DATE ASC)LOCALREVERSE TABLESPACE I0; ALTER TABLE DOCA ADD CONSTRAINT XPKDOCA PRIMARY KEY (DOCA_ID); CREATE INDEX XFKDOCA_DOCA_BKG_PAX_ID ON DOCA( DOCA_BKG_PAX_ID ASC)LOCALREVERSETABLESPACE I0;
I would like to know the difference between the performance of the unique and non-unique local indexes?.
View 10 Replies
View Related
Jun 25, 2013
In my application I am facing peculiar error. For easy understanding I am considering emp table. In my package P1 I have two procedures Proc1,Proc2.
Proc1 : It is receiving employee details and for checking if employee already exists it is calling Proc2.
Proc2 : Here it checks if employee exists. If exists it deletes old record, commit and inserts new record in sequence.
But however in few instances Proc2 is returning unique constraint (CONSTRAINT_NAME) violated. I am very much confused why this error is coming.
View 12 Replies
View Related
Dec 25, 2007
i want to get table name, constraint name, constraint type with join processes in string type. this is what i want: alter table tablename add constraint constraintname constrainttype(columnname)
View 1 Replies
View Related
Sep 5, 2012
I am trying to handle PK violation error on a certain table, on INSERT, my best guess is I should use a trigger. The basic idea is this:
The table consists of 7 columns, and 6 of them are PK, and the seventh one is "amount". I want to handle PK violation in such way that, if it occurs during INSERT, then instead of inserting a new row, it should just update the "amount".
View 16 Replies
View Related
Jan 14, 2012
I am using the Toad10.After i enter the user, Pwd it displays the Toad error that""Access violation at address 6761CB21 in module 'ORA805.dll'. Read of address 00000010 ""
while i try to use the F4 functionality, it again displays the above msg and Object not found...After i execute the query, all the characters data displays in chinees.
View 1 Replies
View Related
Jun 2, 2008
What i have to do to overcome the following error..whenever im using toad im getting this error since start writing and executing procedures and functions.
access violation at address 006b5b1b in module 'toad.exe' read of address 0000011d
View 4 Replies
View Related
Nov 21, 2012
I have upgraded from APEX 4.1 to 4.2.all read only items with dynamic action are arising below error:
session state protection violation: this may caused by manual alteration of protected item P2_IDACCSET.
View 16 Replies
View Related
Jan 15, 2013
Using apex 4.2. I have created form item on page and item attribute DISABLES IN SETTINGS , set value as YES and SESSION STATE value as YES.
SETTINGS->DISABLES-> SESSION STATE
by doing this i am getting the error. Error is
Session state protection violation: This may be caused by manual alteration of protected page item P98_CHECK_AMOUNT. If you are unsure what caused this error, please contact the application administrator for assistance.
View 8 Replies
View Related
May 29, 2013
My oracle backup via Netbackup failing with error 6 (Netbackup) and i have checked the logs please find the RMAN log file as well.
Script /opt/rman_script/st72_oracle_full.sh
==== started on Tue May 28 15:27:46 SGT 2013 ====
RMAN: /OraBase/V10203/bin/rman
ORACLE_SID: ST72
ORACLE_USER: oracle
ORACLE_HOME: /OraBase/V10203
NB_ORA_FULL: 1
NB_ORA_INCR: 0
[code]....
View 2 Replies
View Related
May 8, 2013
Given facts:
rman is used to backup database A to disk
rman is used to put those disk backups to tape
rman is used to duplicate database A to database B on another host
the duplicate process worked fine before we started testing encryption
the duplicate process worked fine with database A having an encrypted column in one table in a non-encrypted tablespace
Now, database A has an encrypted tablespace with nothing currently in it. The duplicate process now ultimately fails with ORA-19913, unable to decrypt backup.
I am not using encrypted backups, not specifying encrypt or decrypt anywhere in the duplication process. The only thing that is encrypted is the one tablespace in database A. I have the same wallet files on Host A (database A) and Host B (database B). Wallets are open. So why does the duplication process fail because the backup cannot be decrypted?
View 8 Replies
View Related
Apr 26, 2012
i have a problem that i have created a table named PROJECT and structure is like-
CREATE TABLE PROJECT
(
id VARCHAR2(250 BYTE) NOT NULL,
NAME VARCHAR2(250 BYTE) NOT NULL,
COMPID NUMBER NOT NULL,
[code]...
and this table is created in some number of different database then i want to delete the not null constraint of "id" column and there is 3 not null constraint in my table and i didnot gave name at the time of creation, so we cant delete it by its name in the script because there will be different name in another database for the same constraint. i want to make a script to delete the not null constraint because it is the part of my script.
how should i get proper information for deleting the constraint. and i used "user_constraints" but it shows same information for the all three "not null" constraint.
View 2 Replies
View Related
Aug 14, 2013
Create table students
(
Sid number(3),
Sname varchar(20) not null,
Email varchar(20) not null,
Doj Timestamp default sysdate not null,
Dob date not null,
[code]....
when i run the above code i m getting error like this...I dont understand wat error it is...Because i didnt reference any column in the check constraint...Thn why it says that i m referencing some column..
Error:
SQL>
SQL> Create table students
2 (
3 Sid number(3),
4 Sname varchar(20) not null,
[code]...
View 2 Replies
View Related
