RMAN :: INC Level 0 Backup Balloon In Size

Feb 23, 2013

The incremental level 0 backup for database is going more than expected:

status: Failed
backup size:

INC LEVEL 0 229 GB.

But Re-run the backup successfully. backup size is:

INC LEVEl 0 219 GB.

why INC LEVEL 0 was 229 GB? i.e increase 10 GB in size?

NOTE: The RMAN metadata is not deleted.

View 2 Replies


ADVERTISEMENT

RMAN :: Size Of Level 1 Differential Backup Greater Than Full Backup

Jul 22, 2013

I am trying to practice some RMAN configuration settings.Version 11.2.0.1OS - Linux X86-64 What i wanted to validate is if there is no level 0 backup of database taken, then the level 1 backup will be automatically backing up all the blocks of the database(similar to full backup). RMAN> report schema; Report of database schema for database with db_unique_name DB101 List of Permanent Datafiles

File Size(MB) Tablespace  RB segs Datafile Name----1    300      SYSTEM +DATA/db101/datafile/system.257.8208254172    200  SYSAUX ***     +DATA/ db101/ datafile/sysaux.268.8208254253    820      UNDOTBS1 ***     +DATA/db101/datafile/undotbs1.261.8208254294    5000     TPCCTAB  *** +DATA/ db101/ datafile/tpcctab.266.820832485 List of Temporary Files=File Size(MB) Tablespace  Maxsize(MB) Tempfile Name---- 1    200..
[code]....

I am not sure what these input bytes are which is not matching with the database size(posted in the beginning of thread)? why it has to show as db full when i actually run a incremental?

View 1 Replies View Related

RMAN :: Level 01 Backup From 02 Levels 0 Backup?

Sep 7, 2012

I'm running ora 11gr2 on windows environment and I got a doubt on a specific situation.

I have to locations for my rman bkps, A and B, which point to different devices, one local and the other remote.

Imagine I take a LEVEL 0 backup on day 20 pointing to both locations, A and B. On day 21, 22 and 23 I take a level 01 backup pointing just to the local destination A. On day 24 I take another LEVEL 0 backup pointing just to location A again....

Now, I want to take a level 1 backup to location B, just to backup the blocks changed since the backup level 0 taken on day 20, bypassing the blocks already taken on days 21, 22, 23...

Is that possible? To control the levels 01 backup from 02 different destinations?

View 4 Replies View Related

Backup & Recovery :: Database Size Is 30GB Is It Recommended For RMAN Backup

May 22, 2012

database size is 30GB is it recommended for RMAN backup

View 2 Replies View Related

RMAN :: Schema Level Backup

Dec 18, 2012

DB : 10/11g
OS : REHL

can we have a schema backed up into one rman piece?

View 1 Replies View Related

Recovery Manager (RMAN) :: Take Incremental Backups Without Level 0 Backup

Nov 13, 2013

Any procedure which we can initiate an incremental backup without Level 0 backup.

View 9 Replies View Related

RMAN Backup Size?

Apr 18, 2012

I have Oracle database.I take rman backup everyday.Also I set a scheduled backup script.But scheduled backup size is 166MB,but if I take manual rman backup(rman>backup database) this backup size will 2.8GB.This backup isn't incremental backup.

I wrote 3 batch script.Finally this backup script call

backup script:

run
{
backup database plus archivelog delete input format 'C:\db_11g_backup\backup\oracle_scheduled_backup\backups\%d_%t_%s.rman';

[Code]...

View 2 Replies View Related

Backup & Recovery :: RMAN Recovery Failing With Incremental Level 0 Backup

Feb 10, 2011

We are trying to restore a database on the different server using RAM incremental level 0 and 1 backups. We have weekly Incremental level 0 backups along with incremental backups on daily basis. During recovery of Incremental level 0 backup, RMAN is expecting/looking for Incremental Level 0 backup of prior week as well. Is this the usual process for RMAN to look for prior level 0 backup though we need to restore from the current level 0 backup and roll forward by a week with subsequent Level 1 backup.?

We intend to restore from the Level 0 of 1/16 and roll forward with daily incrementals till 1/22. RMAN is expecting level 0 backupsets from 1/9 backup as well and keep failing since those backups are not available. quick inputs since we are in middle of recovery and trying to resolve if this is even doable.

View 11 Replies View Related

Backup & Recovery :: Incremental Backup Level 1 Or Level 0 Without Archivelogs?

Oct 22, 2012

Can you take an incremental backup level 1 or level 0 without archivelogs?

syntax would bebackup as compressed backupset cummulative level 1 database.

The reason I ask is because when I run backup as compressed backupset cummulative level 1 database plus archivelogs # it runs fine, but when I run backup as compressed backupset cummulative level 1 database it just hangs.

View 20 Replies View Related

Server Utilities :: Do EXPDP Utilities Does Backup At Block Level As What RMAN Is Doing

May 29, 2013

I have one doubt on Expdp & RMAN. Do EXPDP utilities does backup at block level as what RMAN is doing? Which one is faster, expdp or RMAN?

View 16 Replies View Related

Backup & Recovery :: Restore / Recover Level 1 Backup On New Server

Jan 31, 2011

I am trying to create my database on a new server using rman incremental hot backups.

I have already restored and recovered my level 0 database on new server, but i am not able to restore/recover the level 1 backup on the new server. I have transported level 1 backup irom the old server to the new one. Do i need to recover lvl 1 bkp only or restore it also.

View 1 Replies View Related

Backup & Recovery :: SCN Based Backup Do RMAN Generate Backup From Archivelogs

Oct 18, 2012

understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???

View 1 Replies View Related

Backup & Recovery :: 2 Separate RMAN Backup One Backup Is Of Only Datafile

Jan 24, 2011

I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am

other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)

if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)

I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)

View 17 Replies View Related

Backup & Recovery :: RMAN Duplicate Set Until Time Using Wrong Backup Piece Name To Restore?

Feb 26, 2012

We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.

For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.

RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit

Is there a way on how to let RMAN use the latest backup pieces instead?

View 1 Replies View Related

Backup & Recovery :: ORA-01655 On CREATE USER (splitted From RMAN Backup Error)

Dec 22, 2012

I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:

SQL> create user rman identified by rman default tablespace data
temporary tablespace temp

ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace

OS:Windows XP
Oracle 10g

View 2 Replies View Related

Backup & Recovery :: RMAN Full Backup Failing When Backing Up Temp File?

Jan 28, 2011

I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...

brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap

The backup goes thru but i get this erro on the end...

BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28

[code]...

Copyright (c) 1982, 2007, Oracle. All rights reserved.

RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42

[code]...

Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman

[code]...

I have check on the system .. There is not file like that but thwre on on the db i,e

eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1

View 13 Replies View Related

Backup & Recovery :: Restore Dropped Or Wrongly Updated Table Using RMAN Backup?

Feb 9, 2011

Is it possible to restore dropped table OR wrongly updated table using RMAN backup.

View 18 Replies View Related

Backup & Recovery :: RMAN Script Delete The Backup Pieces Older Than 2 Days

Jan 8, 2013

Is this script is enough to delete the backup pieces older than 2 days.

CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;

run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;

[Code]....

View 1 Replies View Related

RMAN :: Fetch Result Of Backup Into Log File After Windows Scheduler Runs Backup

Jan 8, 2013

My Rman log location is d:kp man.log, how can i fetch the result of backup into this log file after windows scheduler runs backup..

View 6 Replies View Related

Backup & Recovery :: Does Full Cold Backup Of RMAN Include Online Redologs

Jan 8, 2013

Does the full cold backup of rman include online redologs?

So that at the time of recovery when i restore the database the online redologs also restored to that point?

View 2 Replies View Related

Backup & Recovery :: Check Current Value For Limit Channel In Rman Backup?

Mar 19, 2009

Would like to check how do we check the current value for limit channel in rman backup..

eg set limit channel d1 kbytes 2024800;

View 2 Replies View Related

Backup & Recovery :: Configured Tivoli And Getting Error While Execute RMAN Backup

Nov 17, 2012

We have configured tivoli and getting the below error while execute rman backup.

> rman target / catalog rman/*****@CATLOGDB
Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMTMXPRD (DBID=534215973)
connected to recovery catalog database

[code]....

View 6 Replies View Related

Backup & Recovery :: RMAN Backup Fails On Windows When Using Batch File?

May 3, 2011

I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.

D:> \3.193.211.19sgdba
mankp_acressit.bat
D:>rman catalog rman/******@acressit target / cmd
file=E:sgdba
mankp_arch.rcv log E:sgdba
mansit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:sgdba

[code]....

Both single and double quotes (' or ") are accepted for a quoted-string.

Quotes are not required unless the string contains embedded white-space.

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:sgdba
mankp_arch.rcv"

[code]....

* on my DB server I am login using my administrator account, on my PC I dont have admin account.

* I have checked remote execution using local user as well as admin user.

* I have checked the permission and my local ID & EVERYONE has all permission in that folder.

View 2 Replies View Related

Backup & Recovery :: Restore RMAN Backup In New Server / Got Error 06172

Jun 21, 2011

We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.

Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.

My instance is named MTDPROD, and I will create all from scratch.

At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN

At new server, I run all these commands:

C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>

[code]....

By instance, I see a lot of this kind of files:

- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04

It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.

This is the backfull.sql:

run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_

[code]....

This is the backincr.sql:

run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'

[code]....

View 6 Replies View Related

Backup & Recovery :: Tape Streaming Not Happening While Performing RMAN Backup

Oct 29, 2011

Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough.What could be a solution to make tape streaming happen during the backup?

A.Configure backup optimization

B.Configure the channel to increase MAXOPENFILES

C.Configure the channel to increase the capacity with the RATE parameter

D.Configure the channel to adjust the tape buffer size with the BLKSIZE option

View 7 Replies View Related

Inputs On RMAN Backup N Recovery For Multiple Restore Of Clean Backup?

Nov 7, 2010

We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.

View 3 Replies View Related

Backup & Recovery :: Identify Particular Archive-log File Have Backup Or Not From RMAN Catalog?

May 30, 2012

How can be identify a particular archive-log file have backup or not from rman catalog?

View 2 Replies View Related

Backup & Recovery :: RMAN Control File Auto Backup Error?

Dec 13, 2011

This is what I run

run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';

[code]...

So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.

View 1 Replies View Related

Backup & Recovery :: Restore Rman Backup On New Server As Different Name Sid / Service / Listener

Feb 13, 2012

I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.

Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?

Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?

View 2 Replies View Related

Security :: Data Encryption From Transaction To Backup Level?

Apr 26, 2013

Our client is having requirements that data should be encrypted through-out the process (from transaction level to backup level).

Requirements are as below -

1) Data should be encrypted and can be access only through application (through front end).
2) Even if pl/sql, sql installed, developer user cannot able to fetch data from database.
3) Even DBA, should not have access to fetch the data from the database.
4) Only assigned DBA, should fetch details from database (provided he/she should have details of database as well as application's user / password).
5) It should be restricted by ip and user details (such as ip of application server with user/password of user).
6) Changes should be purely done from database level only.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved