I deleted all my RMAN backup with delete backup command .but when i run query on v$rman_backup_job_details, show information, i don't know that v$rman_backup_job_details read data from where? and how to delete complete that v$rman_backup_job_details don't show any thing?
View 8 RepliesIs this script is enough to delete the backup pieces older than 2 days.
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
configure device type disk parallelism 1 backup type to compressed backupset;
run
{
allocate channel d1 type disk ;
backup filesperset 5 format '/u06/backup/EBSDEV/EBSDEV_data_t%t_s%s_p%p' database ;
sql 'alter system archive log current' ;
backup filesperset 20 format '/u06/backup/EBSDV3/EBSDV3_arch_t%t_s%s_p%p' archivelog all delete input ;
[Code]....
Environment: 2 Node Oracle(10.2.0.4.0) RAC on Aix 6.1.
Backups using RMAN utility.Our system is configured to take backups on Tape library using TSM server.
We take incremental level 1 backup on all days and Level 0 backup on Wednesday.We would like to keep the RMAN retention period of 14 days.I delete the backups that are 7 days old from the disk to save space and 14 days older backup from Tape.
I am getting below error in my RMAN backup logfiles.Also attached
RMAN-06207: WARNING: 147 objects could not be deleted for DISK channel(s) due
RMAN-06208: to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
The configuration of RMAN is:
RMAN> show all;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 14 DAYS;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP ON;
[code].....
How to avoid this error ? Can we set "Retention period" as 14 days in RMAN level and delete the backups in disk which is older than 7 days?Should the deletion of tape backup be handled in TSM level ?
I am working on Oracle 10g Rel 2. I am unable to delete the OBSOLETE from rman
previously my senior use to take backup on remote m/c.
While giving the command
rman>delete obsolete
RMAN-06207: WARNING: 228 objects could not be deleted for DISK channel(s) due
RMAN-06208: to mismatched status. Use CROSSCHECK command to fix status
RMAN-06210: List of Mismatched objects
RMAN-06211: ==========================
RMAN-06212: Object Type Filename/Handle
RMAN-06213: --------------- ---------------------------------------------------
RMAN-06214: Backup Piece \192.168.1.162BACKUPFINPRODDB_T619092194_S12_P1
RMAN-06214: Backup Piece \192.168.1.162BACKUPFINPRODDB_T619093015_S13_P1
May I know what is the command for rman to backup and delete single archive log?
View 15 Replies View RelatedI have a problem in running delete obsolete or report obsolete using rman. Although the retention policy is set to "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 60 DAYS;", when running delete obsolete or report obsolete it deletes or returns all the backupsets till sysdate. What should I do to solve this issue?
View 8 Replies View RelatedI have following query in Dataguard ..
If I want to take Rman archive log backup with delete input command , how the archive logs will be copied to standby database
For eg
I am taking archive backup as
RMAN>backup archivelog all delete input;
here consider few archives are not copied to standby database (due to nw issue) then how standby will receives these missing archives as those are deleted by rman backup at primary side.
I am not getting any document related to above query.
TABLE NAME :ABC
(PARTITION BASE TABLE - 84 Partition and each Partition has 500-800 Millions of Records)
/* Step1 Create MATERIALIZED VIEW LOG */
CREATE MATERIALIZED VIEW LOG ON ABC;
/* Step2 Create MATERIALIZED VIEW Refresh after Every 20 Minutes */
CREATE MATERIALIZED VIEW MV_ABC
REFRESH FAST
START WITH SYSDATE
NEXT SYSDATE+20/ (24*60) AS
SELECT * FROM ABC
WHERE TMSTP > SYSDATE-1;
Scenario:Intially data extracted will be "Greater than SYSDATE-1 = 18/08/2009 11:27:39 " - 76 Millions of Records After 20 Min of FAST Refresh, it will add 2500 Records
i)Is query in the MVIEWS (MV_ABC) SYSDATE-1 will be changed on each FAST Refresh, as observation (as per definition) it is incrementing the records to intial extracted data?
ii)As COMPLETE Refresh will be expensive to execute on the partition base table on each refresh.
Is there any alternative way to achieve the Nature of COMPLETE REFRESH in Materialized View?
iii)Is Delete or Conditional Delete option is possible in Materialized View (i.e not a delete from the base table but the delete from MVIEWS)?
iv)What is the machnism for populating the logs for MVIEWS?Is it overhead for the system and better than a Trigger based approach?
I have taken full backup of database plus archivelog. Then copied them to new server..I want the complete procedure to restore the database on new location.
View 3 Replies View Relatedunderstanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies View RelatedIs it possible to un-delete the deleted backup pieces, then catalog them to RMAN?
ob> lsvol contents vid GENERIC-000138
VOID OOID Seq Volume ID Barcode Family Created Attributes
533 533 28 GENERIC-000138 PCC204L2 GENERIC 2010/11/12 never closes; content manages reuse
BSOID File Sect Level Host Size Created Attributes
4254 277 2 0 oraserv 14.8 GB 2012/03/31 deleted
4255 278 1 0 oraserv 57.7 GB 2012/03/31 deleted
4256 279 1 0 oraserv 54.2 GB 2012/03/31 deleted
4257 280 1 0 oraserv 62.3 GB 2012/03/31 deleted
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26
BR0505I Full database backup (level 0) using RMAN successful
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN>
connected to target database: BR1 (DBID=2250873886)
using target database control file instead of recovery catalog
RMAN> 2> 3> 4> 5> 6> 7> 8> 9> 10> 11> 12> 13> 14> 15> 16> 17> 18> 19> 20> 21> 22> 23> 24> 25> 26> 27> 28>
29> 30> 31> 32> 33> 34> 35> 36> 37> 38> 39> 40> 41> 42
[code]...
Recovery Manager complete.
ERR_RC: 1
BR0280I BRBACKUP time stamp: 2011-01-26 12.23.32
BR0279E Return code from 'brtools -f printcmd -U /oracle/BR1/sapbackup/..befcdgxn..cmd -C
/oracle/BR1/sapbackup/.befcdgxn.cmd | rsh scrbdefrmr207 /bin/sh -c "'LANG=C SHELL=/bin/sh/oracle/BR1/102_64/bin/rman
[code]...
I have check on the system .. There is not file like that but thwre on on the db i,e
eshtsm20:orabr1 88> pwd
/oracle/BR1/sapdata1/perfman_1
eshtsm20:orabr1 89> ls -ltr
total 102408
-rw-r----- 1 orabr1 dba 104865792 Aug 30 09:05 perfman.data1
Is it possible to restore dropped table OR wrongly updated table using RMAN backup.
View 18 Replies View RelatedMy Rman log location is d:kp man.log, how can i fetch the result of backup into this log file after windows scheduler runs backup..
View 6 Replies View RelatedDoes the full cold backup of rman include online redologs?
So that at the time of recovery when i restore the database the online redologs also restored to that point?
Would like to check how do we check the current value for limit channel in rman backup..
eg set limit channel d1 kbytes 2024800;
We have configured tivoli and getting the below error while execute rman backup.
> rman target / catalog rman/*****@CATLOGDB
Recovery Manager: Release 11.2.0.3.0 - Production on Sat Nov 17 13:35:03 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: AMTMXPRD (DBID=534215973)
connected to recovery catalog database
[code]....
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:> \3.193.211.19sgdba
mankp_acressit.bat
D:>rman catalog rman/******@acressit target / cmd
file=E:sgdba
mankp_arch.rcv log E:sgdba
mansit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:sgdba
[code]....
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:sgdba
mankp_arch.rcv"
[code]....
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.
Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.
My instance is named MTDPROD, and I will create all from scratch.
At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN
At new server, I run all these commands:
C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>
[code]....
By instance, I see a lot of this kind of files:
- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04
It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.
This is the backfull.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_
[code]....
This is the backincr.sql:
run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'
[code]....
Tape streaming is not happening while performing RMAN tape backup. On investigation, you find that it is not because of the incremental backup or the empty file backup and that RMAN is sending data blocks to the tape drive fast enough.What could be a solution to make tape streaming happen during the backup?
A.Configure backup optimization
B.Configure the channel to increase MAXOPENFILES
C.Configure the channel to increase the capacity with the RATE parameter
D.Configure the channel to adjust the tape buffer size with the BLKSIZE option
We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.
View 3 Replies View RelatedHow can be identify a particular archive-log file have backup or not from rman catalog?
View 2 Replies View Relateddatabase size is 30GB is it recommended for RMAN backup
View 2 Replies View RelatedThis is what I run
run {
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/dd_oraback/tkprod/%F';
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 22 DAYS;
sql 'alter system archive log current';
[code]...
So /dd_oraback is a Data Domain mount. Not sure if that makes any difference or not.
I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.
Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?
Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?
I am trying to practice some RMAN configuration settings.Version 11.2.0.1OS - Linux X86-64 What i wanted to validate is if there is no level 0 backup of database taken, then the level 1 backup will be automatically backing up all the blocks of the database(similar to full backup). RMAN> report schema; Report of database schema for database with db_unique_name DB101 List of Permanent Datafiles
File Size(MB) Tablespace RB segs Datafile Name----1 300 SYSTEM +DATA/db101/datafile/system.257.8208254172 200 SYSAUX *** +DATA/ db101/ datafile/sysaux.268.8208254253 820 UNDOTBS1 *** +DATA/db101/datafile/undotbs1.261.8208254294 5000 TPCCTAB *** +DATA/ db101/ datafile/tpcctab.266.820832485 List of Temporary Files=File Size(MB) Tablespace Maxsize(MB) Tempfile Name---- 1 200..
[code]....
I am not sure what these input bytes are which is not matching with the database size(posted in the beginning of thread)? why it has to show as db full when i actually run a incremental?
if I run below rman command lines in 10g and 11g RMAN, it works well, but NOT in RMAN (Release 8.1.7.4.0), so which commandlines I should use to get to the same pursposes in RMAN 8.1.7.4?
run {
ALLOCATE CHANNEL c1 TYPE 'sbt_tape';
ALLOCATE CHANNEL c2 TYPE 'sbt_tape';
ALLOCATE CHANNEL c3 TYPE 'sbt_tape';
[Code]...