I have been tasked with project on data migration... and am a complete and utter newbie on oracle. I am confused with the companies standard report format.
it says that I need to show the structure of any "control" tables I used
And also to provide "control" scripts to show that data was not corrupted during migration.
I have not come across this terminology of control tables and control scripts...
I am using OEM Grid control 10g for monitoring/reporting purposes and a bit new to OEM.I am able to generate database alerts sent via email say for DB_abc1 and also generate reports.I installed Oracle 10g agent on a another box and lets say with DB_abc2 running on it,and did not realise that there was a database control already installed on that box, so I
1.Uninstalled database control on DB_abc2 box.
2.Uninstalled Oracle 10g agent and re-installed it on DB_abc2 box.
2.Was able to configure the DB_abc2 database from OEM Grid control gui ie the dbsnmp user password and was able to connect to it.
But when I put in alert for things like ORA-XXXX errors I am not getting any emails, also when I put in database usage reports(to be sent via emails) the reports are not picking up any data, they are empty.
I checked the agent on the box in question and the heart beat is OK, and I manually uploaded using "emctl upload" and it is sucessful.The only alerts I am getting for DB_abc1 is the agent up/down thats it.
DB_abc1 is a 9208 database and DB_abc2 is 10201 database.
I need to install the new Oracle Grid on a new virtual machine. Currently the new Grid VM server has a different name and IP. After it is setup and tested it will eventually take the place of the old production server using its original IP and name. If I install the new Grid now on this new VM with different name and IP address would I have to reinstall the agents on each of the target database servers?
View 1 Replies View RelatedIn my system all my control files get corrupted.
FYI,I have taken control file backup and DB backup also 6 hour before the control file get corrupted,then there are quite lot of DB structure change, so Now how to recover my control file with the upto time DB state , since the backup was taken for control file 6 hour before the file get corrupted, now how do I revery the DB/control file, step by step with syntax as well.
Can try this approach to recover:[URL]...
View 2 Replies View RelatedOracle's Software Configuration Manager version 10.1.2.5 with forms version 10.1.2.3.0:
Is this what everybody is using to manage their forms development? If not, what are developers using for Forms 10g version control? I've installed this software. I'm using the Oracle XE database for this repository. At least for running through the tutorial to figure out how this is to work.
I have to say that I am frustrated that I cannot compare one version of a form to another version of the same fmb. I get a java null pointer exception. I have uninstalled the repository using RAU, then recreated it using the RAU. I'm using version control and defining a "large" repository type for more than 10 developers.
I am trying to control which tables are joined based on a null value, so I figured I could use the NVL2.
Here is the code as it stands
NVL2(TBL_TRANSACTIONS.EQUIPSVCSEQ, TBL_EQUIPANDSERVICES.LASTWORKORDERSEQ, TBL_TRANSACTIONS.WORKORDERSEQ)
= TBL_WORKORDERS.WORKORDERSEQ (+)
To explain, if first value is null, then TBL_EQUIPANDSERVICES.LastWOSeq = tbl_workorders.workorderseq (+), otherwise join the transaction.workorderseq.
When I try and execute this code, I'm given "ORA-01417: a table may be outer joined to at most one other table." I've double checked, TBL_Workorders is not joined with any other table in any select.
Now, the EquipandServices.workorderseq is joined (+) with another table.
I know this question must have been asked several time. I just want to know the many ways in which we can have a DB up and running even if we do not have any backup of control file not even the trace of the same.
View 6 Replies View RelatedI am just looking to my control file that I have. I have managed to successfully get my control file to load data into the required tables but just for my learning I was trying to amend the when clause with an and condition but keep getting an error.
My code:
OPTIONS (DIRECT=TRUE, ERRORS=0, SKIP=1)
load data
infile 'A:/My Files/Feeds/20130211/data_summary_1_20131214.txt' "STR '
'"
APPEND
into table I_DATA_1
WHEN (RID <> 'RID')
fields terminated by "~|~" optionally enclosed by '"'
TRAILING NULLCOLS
(
RID,
S_TIMESTAMP timestamp 'DD-MON-RR HH:MI:SS.FF3 PM'
)
the above code works perfectly but if i change the following line:
WHEN (RID <> 'RID' AND 'S_TIMESTAMP' IS NOT NULL)than this gives me an error.
I am receiving errors when trying to load the control file. The errors are as follows:
SQL*Loader-500 Unable to open file (homework.ctl)
SQL*Loader-553 file not found
SQL*Loader-559 SYstem error: The system cannot find the file specified.
My control file is located directly in the C drive (C:\homework.ctl). The control file contains the following
LOAD DATA INFILE 'c:\country.dat'
APPEND INTO TABLE homework
fields terminated by ',' optionally encloded by '"'
(country, month, day)
WHEN (month='April')
On the command line, I am entering:
sqlldr system/password control=homework.ctl
In a control file, the code is as follows:
load data
infile 'C:\Documents and Settings\xxxxx\Desktop\abc.txt'
APPEND
PRESERVE BLANKS
INTO TABLE table1
[code]...
When I run the above control file in sqlldr, I'm getting the error as
Record 1: Rejected - Error on table table1, column column3.
ORA-01481: invalid number format model
In the table the column3 data type is NUMBER(6,2).: The column size in table is 6 and position of column3 in control file is only 4. Also if possible let me know how the same data (send me 2 dummy records) which exactly works for the above control file especially for column3 where decimal number comes in the flat file.
For generating the flat file, for column3, i'm using LPAD(:value,4,0) in the select query column list.
How can we add another control file to DBOG database? I need to clarify all the steps during this process.
View 7 Replies View RelatedBy mistakenly Oradata file has been deleted and there is I have not any backup when we Startup the database then we get an Error as
ORA-00205: error in identifying control file, check alert log for more info
Now I want to create controlfile as
Microsoft Windows [Version 6.1.7600]
Copyright © 2009 Microsoft Corporation. All rights reserved.
C:\Users\SARASWATIMAA>SQLPLUS
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 8 23:15:09 2012
Copyright © 1982, 2005, Oracle. All rights reserved.
Enter user-name: SYS AS SYSDBA
Enter password:
[code]...
where is My Mistake in Creating Cotrolfile..I want to know that in which condition we use "SET" or "REUSE" in Create Controlfile.
Is there any way to control the timeout before connecting via dblink. the idea is to test the dblink before calling functions over it, the problem it when i try 'select 1 from dual@dblink' in case if the remote server is down it takes too long time 5-7 min. which causing hang up the session,
So is there any parameter to reduce the waiting time say after 3 sec stop and return the timeout exception.I try the SQLNET.INBOUND_CONNECT_TIMEOUT parameter but not working, also try the tnsping but it alse take long time when the server down.
the database version is 10gr2.
I have setup of two node (prod-db1, prod-db2) clustered database 11gR2 on windows 2008 R2 server. Everything is working fine at this setup.
My question is: Is there a way to make the Enterprise manager Database control run and be available at both the nodes independently. What I see that even at node 2 (which is prod-db2) the EM-DBControl is (https://prod-db1:1158/em) - which means the agent is running at node 1 (prod-db1) only.
My question is that how to make the EM-DBControl also run separately at prod-db2. My idea is to make the high availability of EM-DBControl (in case Prod-db1 machine is down).
I have a problem with my control file [URL].........
What I did, I have a duplicate of the database with the invalid control file, let's call it DUMDB. I am using my control file and no recovery-catalog-db.
I recreated the control file. Now everything is working fine, new backups can be taken, restores can be made. I just need to restore a backup tagged with "LASTDEV". The control file for this backup is the invalid one. So I need a restore WITHOUT restoring the control file.
I did:
CODERMAN> catalog backuppiece '/u03/flash_recovery_area/DUMDB/backupset/o1_mf_nnndf_LASTDEV_75fmkllw_.bkp';
cataloged backup piece
backup piece handle=/u03/flash_recovery_area/DUMDB/backupset/o1_mf_nnndf_LASTDEV_75fmkllw_.bkp RECID=1 STAMP=761604017
CODERMAN> list backup;
using target database control file instead of recovery catalog
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
------- ---- -- ---------- ----------- ------------ ---------------
1 Full 2.77G DISK 00:00:00 26-AUG-11
BP Key: 1 Status: AVAILABLE Compressed: YES Tag: LASTDEV
Piece Name: /u03/flash_recovery_area/DUMDB/backupset/o1_mf_nnndf_LASTDEV_75fmkllw_.bkp
List of Datafiles in backup set 1
===========================
File LV Type Ckp SCN Ckp Time Name
---- -- ---- ---------- --------- ----
1 Full 63166185 26-AUG-11 /u02/oradata/dumdb/system01.dbf
2 Full 63166185 26-AUG-11 /u02/oradata/dumdb/sysaux01.dbf
3 Full 63166185 26-AUG-11 /u02/oradata/dumdb/undotbs01.dbf
5 Full 63166185 26-AUG-11 /u02/oradata/dumdb/stdtbs01.dbf
6 Full 63166185 26-AUG-11 /u02/oradata/dumdb/users.dbf
CODERMAN> crosscheck backupset 1;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u03/flash_recovery_area/DUMDB/backupset/o1_mf_nnndf_LASTDEV_75fmkllw_.bkp RECID=1 STAMP=761603187
Crosschecked 1 objects
CODERMAN> RESTORE DATABASE FROM TAG='LASTDEV';
Starting restore at 11-SEP-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=130 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 09/11/2011 20:32:25
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
This is exactly the same message if you do "RESTORE DATABASE FROM TAG='NONEXISTENTDUMMYTAGXXXX'"
Why can the data files not be found even if they are listed in the backup?
I am on 11.2.0.2.0 on Linux64.
I am trying to simulate a damage in my control files
$ORACLE_BASE/oradata/orcl/control01.ctl and $ORACLE_BASE/flash_recovery_area/orcl/control02.ctl
So I moved these files to another folder different of origin with the database online (in linux, I tried to do it in win7, but not works)!
And for my surprise the DML and DDL commands still working! The Oracle docs said:
QUOTE If any of the control files become unavailable during database operation, the instance becomes inoperable and should be aborted.
[URL] ....
What " the instance becomes inoperable" in Oracle Docs means?
How can i see all of the objects that are included on the policy of fine grain access control method?
View 2 Replies View RelatedWe have a database that is accessed by ArcSDE, a product to modify maps. It uses BLOBs to store those maps.
We ran a load on the server and the response time was slow. By running the following query:
select event, total_waits, time_waited, avg_ms, round(ratio_to_report(time_waited) over () * 100) percent
from (select substr(event, 1, 30) event, total_waits, time_waited, round(time_waited_micro / total_waits / 1000, 2) avg_ms
from v$system_event
where wait_class in ('System I/O') union
select 'CPU' event, NULL, value, NULL
from v$sysstat
where statistic# = 12
order by 3 desc)
where rownum <= 10;
I get
EVENT TOTAL_WAITS TIME_WAITED AVG_MS PERCENT
--------------------------- -------------- ------------- -------- ---------
control file parallel write 127187 6354909 499.65 70
CPU 988274 11
db file parallel write 20461 886442 433.23 10
log file parallel write 14987 870672 580.95 10
log archive I/O 1557 18094 116.21 0
control file single write 149 10590 710.71 0
control file sequential read 136502 5219 .38 0
log file single write 56 2511 448.41 0
log file sequential read 489 492 10.05 0
BUG: 733426 says to change the event="10359 trace name context forever, level 1"
I am trying to create access control list, but it gives me following error.
SQL> begin
2 dbms_network_acl_admin.create_acl (
3 acl => 'Test_utl_mail.xml',
4 description => 'Allow mail to be sent',
5 principal => 'TEST',
6 is_grant => TRUE,
7 privilege => 'connect'
8 );
9 end;
10 /
dbms_network_acl_admin.create_acl (
*
ERROR at line 2:
ORA-06550: line 2, column 3:
PLS-00201: identifier 'DBMS_NETWORK_ACL_ADMIN.CREATE_ACL' must be declared
ORA-06550: line 2, column 3:
PL/SQL: Statement ignored
the problem we are facing is that we are having some problems with names in a filed which are not letters but strange symbols inserted by a webservice which by the way has been corrected, but we have the discrepancy on out DB, so I've decided to write a PL/SQL procedure to correct them.
Here is the example of an incorrect record.
4047254| STEVE; ROVINSON (THE INCORRECT SYMBOL IS CHR(32), I do not know why the forum doesn't show it)
So, if you look there's a symbol that is not interpreted by the DB and my original idea was to extract them and correct then with another procedure. I have originally wrote a procedure with the logic if there's a symbol that is not beween currect letters (from A to Z including semicolon (;)) extract them and that's it. So, the big question is, How I transfer the control from the second loop to the cursor loop in order to analice the next record.
here is the code which hasn't been completed yet.
DECLARE
CURSOR get_nombre IS
SELECT CNTA_NOM_ABRV
FROM CUENTA;
[code]...
i want to control our session in database oracle10g which means that:x is not allowed to connect to the database, if x try to connect to the database his session will be blocked and a message must be sent to the administrator.
View 8 Replies View RelatedMy management is asking me to find the best way to migrate our 3.3 TB data warehouse to a new server. I currently use RMAN to back up the database. This is done offline on Sundays, and it takes about 9 hours, compressed backups to disk. Archived log backups are done online, not in conjuction with the db backup.
I have read a number of documents detailing step to use OEM Db Control (aka dbconsole) to clone the database to the new server.
I have a few questions:
1. I need to clone the Oracle SW first, as our current install has patches, so it should take less time.
2. Do you think just restoring from the last RMAN backup and doing recovery would be faster than cloning?
3. On the new server, I have assumed that the root user (not me) would have to pre-create the OFA structure, e.g.; we have some mount points like /f01/oracle/DBNAME or /g01/oracle/DBNAME. I cannot imagine that the Db control Gui or Rman could create that structure on the target server. Is that correct?
4. There seems to be an attitude in my shop that the storage array mount points and OFA would not have to be identical on the target server. Any opinions?
Back in 1995, I successfully manually cloned a database to a new server in an HP environment, but it was only about 70G!!
I am cloning a database from a cold backup in archivelog mode using the control file script but failes:
STARTUP NOMOUNT
CREATE CONTROLFILE DATABASE PROD NORESETLOGS ARCHIVELOG
:
:
:
ALTER DATABASE OPEN;
ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\ORADATA\PROD\TEMP01.DBF'
[code]...
Tried again with RESETLOGS:
STARTUP NOMOUNT
CREATE CONTROLFILE DATABASE PROD RESETLOGS ARCHIVELOG
:
ALTER DATABASE OPEN RESETLOGS
*
ERROR at line 1:
ORA-00344: unable to re-create online log 'D:\ORADATA\PROD\REDO01B.ORA'
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 5) Access is denied.
I'd like to implement a treeview control with checkboxes in every node using Microsoft TreeView Control 6.0 in Forms 6i. I already did the following steps:
1. Download and register OCX (regsvr32 C:windowssystem32comctl32.ocx)
2. Draw OCX control on form.
3. Right click on OCX control and Insert Object "Microsoft TreeView Control 6.0"
4. Import OLE Library Interfaces "MSComctlLib.TreeCtrl.2"
5. Set Data Block Single Record to YES
6. Set OLE Class of Listview control to "MSComctlLib.TreeCtrl.2"
7. Rename treeview control to "ACX_TREE" and Data Block to "BLK_CONTROLS"
Now I need to populate the treeview adding code to the "WHEN_NEW_FORM_INSTANCE" Trigger, but I don't see how. how to do this and/or a place where I can find a working example?
I have created two control items like organization and location and both items contains lovs.here i have to make location lov is dependent on organization.one org contains multiple locations. how to make this change?
View 1 Replies View RelatedWe have some space constrain with the server and unfortunately the Specific Oracle file system is not extendible. Middleware/ gc_inst are also in the same mount point consist (28G). Would like to create a soft link to these directory to a newly mounted LUN and so to avoid this space issue which is currently 95%. if soft link works and releases 28G?
OEM grid control 11g
OS: Red Hat Enterprise Linux Server release 5.6 (Tikanga)
Linux corpoem.corp.idt.com 2.6.18-238.5.1.el5 #1 SMP Mon Feb 21 05:52:39 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
I developed one form which having four tabs , i want one button control for all of them , I have been created buttons control individually for each tab , there is problem with navigation , query and clear the form .
View 3 Replies View RelatedOracle Enterprise Manager 11g Database Control Release 11.2.0.1.0 Agent is running, dbconsole too. to the database through SQL Developer and SQL Plus connects. when you go to localhost:1158/em opens a BLANK PAGE that contains 2 "squiggles" view"|[ ]]" tried in different browsers, identical. a feeling that most web interface is physically not in folders.
View 0 Replies View Relatedwhat executable statements in PL/SQL mean? My objectives are:
1)Writing Executable Statements
2)Create PL/SQL executable blocks using DML and transaction control
I have to explain what exactly each is and what should come under it. what kind of statements and what should be covered under executable statements?