pivot the table. Table
dataNAMELINE_TYPE_REF_IDClassCreateShipmentServiceAdapterImplMethodgetContactsAndSitesForAccountUserskkondNode NamePB15CKYNum Contacts3ClassCreateShipmentServiceAdapterImplMethodgetContactsAndSitesForAccountUserdrcoulNode NameC4F6JJ1Num Contacts21ClassCreateShipmentServiceAdapterImplMethodgetContactsAndSitesForAccountUserdrcoulNode NameC4F6JJ1Num
[Code]....
i have a table which looks like this
TRANS_ID TRANS_TYPE CONNECTION_DATE CLOSED_DATE
LK490 4 01-01-2009 01-01-2011
LK490 3 01-01-2010 01-01-2012
SELECT TRANS_ID, TRANS_TYPE, CONNECTION_DATE , CLOSED_DATE FROM TABLE_A
and want to pivot it like this
TRANS_ID 4_CONNECTION_DATE 4_ CLOSED_DATE 3_CONNECTION_DATE 3_ CLOSED_DATE
LK490 01-01-2009 01-01-2011 01-01-2010 01-01-2012
I have a table in the following format:
CTitle1, CTitle2, CTitle3, CTitle 4, CTitle5
Row1Val1,Row1Val2,Row1Val3,Row1Val4,Row1Val5
Row2Val1,Row2Val2,Row2Val3,Row2Val4,Row2Val5
Row3Val1,Row3Val2,Row3Val3,Row3Val4,Row3Val5
Row4Val1,Row4Val2,Row4Val3,Row4Val4,Row4Val5
Row5Val1,Row5Val2,Row5Val3,Row5Val4,Row5Val5
I have an application that requires the data to be in the following format:
CTitle1, Row1Val1,Row2,Val1,Row3Val1,Row4Val1,Row5Val1
CTitle2, Row1Val2,Row2,Val2,Row3Val2,Row4Val2,Row5Val2
CTitle3, Row1Val3,Row2,Val3,Row3Val3,Row4Val3,Row5Val3
CTitle4, Row1Val4,Row2,Val4,Row3Val4,Row4Val4,Row5Val4
CTitle5, Row1Val5,Row2,Val5,Row3Val5,Row4Val5,Row5Val5
So I am truly trying to transpose the columns and rows and not doing a traditional pivot. How I can do this in Oracle 9i?
I have a table tab1 which contains columns Cust, ProdSeq, StartDat, EndDat, AttrId, AttrValue. I can have different attributes represented by attrId (say 1,2,3,4..etc.,) and its value by AttrValue respectively.
My question is for a given a customer, prodSeq and date range say 01-Jan-2013 to 31-Jan-2013, I want a report like below
Example input data
----------------------------------------------------------------
|CUST | PRODSEQ | STARTDAT | ENDDAT |ATTRID |ATTRVALUE |
----------------------------------------------------------------
|C1 | 1 | 1/1/2013 | 1/15/2013 | 1 | 1 |
|C1 | 1 | 1/1/2013 | 1/10/2013 | 2 | A |
|C1 | 1 | 1/1/2013 | | 3 | X |
|C1 | 1 | 1/1/2013 | | 4 | G |
|C1 | 1 | 1/11/2013 | 1/31/2013 | 2 | B |
|C1 | 1 | 1/16/2013 | 1/20/2013 | 1 | 2 |
|C1 | 1 | 1/21/2013 | 1/31/2013 | 1 | 3 |
----------------------------------------------------------------
Expected output
----------------------------------------------------------------------------------------
|CUST | PRODSEQ | STARTDAT | ENDDAT | ATTR1VAL | ATTR2VAL | ATTR3VAL | ATTR4VAL|
----------------------------------------------------------------------------------------
| 1 | 1 | 01-JAN-2013 | 10-01-2013 | 1 | A | X | G |
| 1 | 1 | 11-JAN-2013 | 15-01-2013 | 1 | B | X | G |
| 1 | 1 | 16-JAN-2013 | 20-01-2013 | 2 | B | X | G |
| 1 | 1 | 21-JAN-2013 | 31-01-2013 | 3 | B | X | G |
----------------------------------------------------------------------------------------
I am trying to produce results in pivot format. I want to know how many entries per day per month. In other words how many entries on a Monday for each month, how many on a Tuesday for each month and so on.
The main problem I have is that the date column in the database uses UNIX time stamp. I have managed to get the results I want for a particular month. This code selects the entries for last month.
select
max(decode(pdayno, 1, cnt, null)) Sunday,
max(decode(pdayno, 2, cnt, null)) Monday,
max(decode(pdayno, 3, cnt, null)) Tuesday,
max(decode(pdayno, 4, cnt, null)) Wednesday,
[code].......
This code produces the result:
What I need is for another column at the start of the results to give the month so I end up with 12 rows, 1 for each month.
I did try to group by PENTERED(which is the unix time stamp column)
select pentered,
max(decode(pdayno, 1, cnt, null)) Sunday,
max(decode(pdayno, 2, cnt, null)) Monday,
max(decode(pdayno, 3, cnt, null)) Tuesday,
max(decode(pdayno, 4, cnt, null)) Wednesday,
[code]......
This gave me thousands of rows as each UNIX time stamp is unique. Is there a way of grouping on UNIX time stamp.
SQL> select * from query;
CUSTO SWITCH DATE_X METRIC COUNT_X SEQUENCE_NO FILE
------- ------- --------- ------- ---------- ----------- ----
JCI S1 28-JUN-10 PORT1 10 4 TNB
JCI S1 28-JUN-10 PORT2 4 4 TNB
JCI S1 28-JUN-10 PORT3 8 4 TNB
JCI S2 28-JUN-10 PORT1 1 2 TNB
JCI S2 28-JUN-10 PORT2 5 2 TNB
JCI S3 28-JUN-10 PORT1 6 8 TNB
JCI S5 28-JUN-10 PORT2 2 4 TNB
------->s5 only in the current month-it was not in the previous month data collection
-----------------------------------------------------------------------------
JCI S1 28-MAY-10 PORT1 10 3 TNB
JCI S1 28-MAY-10 PORT3 5 3 TNB
JCI S2 28-MAY-10 PORT1 4 1 TNB
JCI S2 28-MAY-10 PORT2 2 1 TNB
JCI S2 28-MAY-10 PORT3 8 1 TNB
JCI S3 28-MAY-10 PORT2 7 7 TNB
JCI S3 28-MAY-10 PORT3 5 7 TNB
JCI S4 28-MAY-10 PORT1 2 10 TNB
------->s4 in the previous month data
15 rows selected.
1 SELECT A.CUSTO,A.SWITCH,
2 A.PORT1-B.PORT1,
3 A.PORT2-B.PORT2,
4 A.PORT3-B.PORT3
5 FROM (SELECT
6 A.CUSTO
[Code] ......
CUSTO SWITCH A.PORT1-B.PORT1 A.PORT2-B.PORT2 A.PORT3-B.PORT3
------- ------- --------------- --------------- ---------------
JCI S1 0 4 3
JCI S2 -3 3 -8
JCI S3 6 -7 -5
How to include the Switch S4 and S5 in the output. how implemented FULL OUTER JOIN
I need a helo to pivot table with variable columns, I have a pivot table :
SELECT a.*FROM (SELECT codigo_aluno,nome_aluno , id_curso,dia FROM c_frequencia where dia like '201308%') PIVOT (sum(null) FOR dia IN ('20130805' ,'20130812','20130819','20130826'))
a but I need to run the select with values for dia , getting from a other table :
SELECT a.*FROM (SELECT codigo_aluno,nome_aluno , id_curso,dia FROM c_frequencia where dia like '201308%') PIVOT (sum(null) FOR dia IN (select dia from v_dia_mes ))
I have 2 tables , which can be mapped with a common column and the second table's rest of the columns should become like columns(like pivot) and in the second table itself 1 more column called value , this sum of the value becomes a value to the pivot column value. For this I am using CASE structure and I am writing the individual case for each column , but I am sure after some extent case don't work at all and I would like to do it dynamically( when ever the new entry will come into the source table , my proc has to pick automatically the new value and put the new value as part of pivot structure) , so pls share your inputs and if possible provide some sample code.
View 3 Replies View RelatedI have a PIVOT XML query that returns results that I want to display as an HTML report from SQLPlus. Is there a way that this can be done readily? I have searched the net an found references to XML Publisher but in my current situation we do not have the product available.
View 4 Replies View RelatedOracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit
PL/SQL Release 10.2.0.5.0 - Production
"CORE10.2.0.5.0Production"
TNS for Linux: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
See attachment for table creation and table data.
The table tbl_completed has two columns, id and completed. I have created a query that does provide me with the result set that I need, but I need to pivot the rows into columns. So instead of a result set to look like this:
select completed, count(completed) as theCount from tbl_completed group by completed;
COMPLETED THECOUNT
Y 772
N 720
I need a result set to look like this:
COMPLETED,Y,N
THECOUNT,772,720
The best solution that I have discovered is this, but I figuring their might be a better way.
select
(select 'THECOUNT' from dual) as COMPLETED,
(select count(completed) from tbl_completed where completed = 'Y') as Y,
(select count(completed) from tbl_completed where completed = 'N') as N
from dual;
COMPLETED,Y,N
THECOUNT,772,720
I want to use the pivot table inside the group.
View 3 Replies View Related me in building a query. I want to show the result of the query just like pivot table.
Test case
CREATE TABLE CPF_YEAR_PAYCODE
(
CPF_NO NUMBER(5),
INC_DATE DATE,
PAYCODE_TYPE CHAR(1 BYTE),
[code]...
I want that my query should look like the format as attached in the xls sheet.
in my application i have a requirement as follows
1) column 1 indicator
2) column 2 important.
and the other columns are target actual and current year, previous year and next year.the layout should be in pivot table lay out as follows here the three columns will be saved dynamically as 2012,2011,2013 and the respecitive percentage in target and actual column
current_year previous_year next_year
target 10% 12% 5%
actual 5% 8% 5%
How can you use pivot with a parameter? If you attempt to use a parameter then an ORA-500: bind variable not supported is given
Below is a simplified version of the sql to illustrate teh problem.
create table test_pivot
(
ord_no number,
qty number,
loc varchar2(10)
):
insert into test_pivot values (123, 3, 'LOC1');
insert into test_pivot values (123, 2, 'LOC1');
insert into test_pivot values (234, 4, 'LOC1');
insert into test_pivot values (234, 5, 'LOC1');
-- this one is fine
Select * From
(
Select Ord_No, Qty, Loc
From Test_Pivot
Where Ord_No In ('123', '234')
)
Pivot (Sum(Qty) For Ord_No In ('123', '234') )
-- how to use pivot with parameters
Select * From
(
Select Ord_No, Qty, Loc
From Test_Pivot
Where Ord_No In (:Ord1, :Ord2)
)
Pivot (Sum(Qty) For Ord_No In (:Ord1, :Ord2) )
I have the following table structure:
PK1,PK2,PK3,A1,B1,C1,A2,B2,C2
Which I want represent as follows:
PK1,PK2,PK3,A1,A2
PK1,PK2,PK3,B1,B2
PK1,PK2,PK3,C1,C2
Is pivot the right command to use? If so, how do I do this? Most pivot examples I've looked at use an aggregate like SUM, which is not really want I am trying to accomplish here.
I'm trying to use a PIVOT on the following data set:
ID STATUS_DESC PAY_STATUS PAID_DATE TRANSACTION_TYPE TRANSACTION_DESC DEBIT TOTAL
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
9876 In Progress 2nd Payment Made 11-DEC-12 19.38.57 Card Payment Payment 2 349 349
9876 In Progress 2nd Payment Made 06-DEC-12 14.33.57 Card Payment Payment 1 100 100
However I'm still getting two rows as per the below. Ideally all data should be on a single row.
ID STATUS_DESC PAY_STATUS PAYMENT_1_DATE PAYMENT_1_AMT PAYMENT_2_DATE PAYMENT_2_AMT TOTAL
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
9876 In Progress 2nd Payment Made 06-DEC-12 14.33.57 100 100
9876 In Progress 2nd Payment Made 11-DEC-12 19.38.57 349 349
I have constructed my pivot using the following on the outer select:
PIVOT (MAX (insert_timestamp) AS paid_date
,SUM (debit) AS amt
FOR transaction_desc IN ('Payment 1' AS payment_1,
'Payment 2' AS payment_2)) ;
I've used MAX to pivot the date and also tried using NVL on the insert_timestamp but still no luck.
I have this following data in a single table
Student
Semester
Subject
Marks
and I want to achieve the following.
I am asked to write a query with the students as Rows with thier subjects and marks as per thier semester which is the columns.
new to this type of queries...This is somewhat like pivot..
Those who have not appeared for a semester should be null just exactly as shown above.Is it posible ?
I have a requirement to write a single sql query where i can generate the pivot report. Found some of the examples in Google search. But here we are hard coding the values if it is limited like month in this example.
i want to write similar query to represent the amount based on product type , i have around 200 types of products. I can't write case/ decode statement those many times.
query which will produce the output in pivot format , dynamically depending the number of values.
select Product,
sum(case when Month=�Jan� then Amount else 0 end) Jan,
sum(case when Month=�Feb� then Amount else 0 end) Feb,
sum(case when Month=�Mar� then Amount else 0 end) Mar
from Sales
group by Product
Is there anyway to pivot the results of a query?
so if i have:
SELECT GROUP, count(*)
FROM GROUP
GROUP BY GROUP
And it give the following output:
A 10
B 50
c 24
Is there anyway to put into this format?
A B C
10 50 24
I am doubting that there is and that i am going to have to handle this in my code later, but it never hurts to ask!
I am joining two oracle provided basic tables emp and dept and want to show result as a department detail and followed by employee detail belong to that.
Standard result of joining two tables looks like below:
deptno dname empname
10 ACCT SCOTT
10 ACCT MILLER
20 SALES JOHN
20 SALES XYZ
30 FINANCE AAA
Now I need the output as below as per a report requirement.
entity_type name/no
DEPT 10
EMP SCOTT
EMP MILLER
DEPT 20
EMP JOHN
EMP XYZ
I am using oracle 10g release 10.2.0.1.0. Can I use oracle analytic function here?
This is how data is in table.
SQL> SELECT order_num, jcds.change_num, jcds.object_status, jcds.time_changed
2 FROM tjcds_f jcds
3 WHERE change_num = '001'
4 AND object_status IN ('E0001', 'I0002', 'I0009', 'I0028')
5 and order_num='000001000001';
ORDER_NUM CHANGE_NU OBJECT_STAT TIME_CHANGED
------------ --------- ----------- --------------------------------------------
000001000001 001 I0002 01-NOV-10 02.52.56.000000 PM
000001000001 001 I0009 01-NOV-10 09.30.20.000000 AM
000001000001 001 I0028 01-NOV-10 10.36.32.000000 AM
Needed Output:
ORDER_NUM CHANGE_NU E0001 I0002 I0009 I0028
------------ --------- ----------- ------------------------------- ------------------------------ ---------------------------------
000001000001 001 01-NOV-10 02.52.56.000000 PM 01-NOV-10 09.30.20.000000 AM 01-NOV-10 10.36.32.000000 AM
My Query:
SELECT order_num, jcds.change_num,
decode(jcds.object_status,'E0001', jcds.time_changed) E0001 ,
decode(jcds.object_status,'I0002', jcds.time_changed) I0002,
decode(jcds.object_status,'I0009', jcds.time_changed) I0009,
[code]...
how do i get the above requirement in one row? is it possible.
I am not sure if we can do this as i tried many solution for pivoting/unpivot My data looks like from table when i do Select * from table_name
col1 col2 col3 col4 col5 col6 col7 col8
20130320_0938 C11 1416 98 93 30 30 32
20130320_0938 C22 26 92 73 50 50 65
20130320_0938 C33 86 95 81 63 63 76
I want the data to look like
[code]...
with t1 as
(
select 'eff_date' param_name, 'mb256_type' param_type,'01-01-1970' param_value from dual
union all
select 'disc_date' param_name, 'mb256_type' param_type,'31-12-9999' param_value from dual
union all
select 'initial val' param_name, 'mb256_type' param_type,'30' param_value from dual)
select param_name,param_type,param_value from t1;
desired output:
need output in a row in three different columns
param_value
01-01-1970 31-12-9999 30
I tried below query
SELECT *
FROM (
with t1 as
(
select 'eff_date' param_name, 'mb256_type' param_type,'01-01-1970' param_value from dual
union all
select 'disc_date' param_name, 'mb256_type' param_type,'31-12-9999' param_value from dual
[code]...
and am getting output as
param_type eff_date_param_value disc_date_param_value initial_ignoring_param_value
mbn256_type <null> <null> <null>
I've tried for pivot query feature of Oracle 11g, but I'm trying for pivot result on multiple column.
Herewith I'm displaying my try on single column pivot query.
SQL> select * from
2 (select deptno,job,sal
3 --,comm
4 from emp)
5 pivot (sum(sal) as payment for job in('CLERK','SALESMAN','MANAGER'))
6 order by 1;
[code]....
I've tried this one also, but it didn't seems to be working.
SQL> select * from
2 (select deptno,job,sal,comm
3 from emp)
4 pivot (sum(sal) as payment_sal,sum(comm) as payment_comm for job in('CLERK','SALESMAN','MANAGER'))
5 order by 1;
[code]....
I want result like below.
DEPTNO PAYMENT 'CLERK'_PAYMENT 'SALESMAN'_PAYMENT 'MANAGER'_PAYMENT
---------- ------- --------------- ------------------ -----------------
10 SAL1300 2450
20 SAL1900 2975
30 SAL 950 5600 2850
30 COMM 2200
is it possible to have multiple column pivot query.
Is any access rights to be given for using pivot function...i tried below query but it throws error
select * from BI_BALNCE_SHEET
PIVOT(sum(balance) for gl in('Income','Expenditure'));
I tried to follow Pivot query using XML option in APEX
I can get the data into the xml serialized state, but how do I display the actual values in a region? See my example app below. I want the two far right columns in the Pivot XML region to duplicate what is in the original version.
[URL].......
I just so happen to be the one trail blazing the pivot function for the section of the company I work in. (Needless to say, a Sesame Street style answer will not be offensive.) We are literally in the process of upgrading to 11g (11.2.0.1.0). Sadly, none of our more experienced programmers now anything about the pivot function. Not really surprising to me since we've been working in 10g. Anyway, I am using SQL Developer version 3.0.04 which I know is not the newest but I don't yet have permission to upgrade. I used [URL] to get me as far as I am on this function.
The script I am having problems with is:
SELECT *
FROM
(SELECT
[Code]....
The error I'm getting is:
ORA-01738: missing IN keyword
01738. 00000 - "missing IN keyword"
*Cause:
*Action:
Error at Line: 16 Column: 2
The error indication bounces between line 15 and 16. If I put IN at the end of 15 I then have a missing right parenthesis error...
We have been designing resource management system and want to provide flexible way to extend resource properties at runtime. So we are storing resource properties in a single table,
e.g. select * from _kvID K V---- ----- ----- 1 name Bob 1 age 30 1 gender male 2 name Susan 2 status married convert to+-----+-------+--------+----------+| key | color | height | whatever |+-----+-------+--------+----------+| 1 | green | 15 | --- || 2 | --- | --- | lol |+-----+-------+--------+----------+example of dynamic pivot Dynamic SQL Pivoting – Stealing Anton’s Thunder</title> //<title>AMIS Technology Blog…
Is it possible to create interactive report with dynamic columns updated when _kv will be changed?Is it possible to create add/edit dynamic form depends on key set if we add value type description?
I'm using pivot query feature of oracle 11g and came across a strange situation where i need to pass a "select statement" in a "in clause" of pivot query.
SQL> CREATE TABLE TEST1
2 (
3 UIN NUMBER(8) NOT NULL,
4 TESTING_ID NUMBER(4),
5 PFA_RESULT VARCHAR2(30 BYTE)
6 );
[code]....
I have tried with pivot xml but it not giving desired output in sql*plus session.It is giving unreadable output.
select * from
(select uin,testing_id,pfa_result from test1)
pivot xml (max(pfa_result) as result
for (testing_id) in (select distinct testing_id from test1));
[code]....
Here actually i want to use "select distinct id from test1" instead of "in (11,12,13,14,15)". Because i don't know how many id's will be there and of which values. e.g. 11 or 21 or 25.
How do you query the output from the 'pivot xml' sql?
Just as an example, How can you query the output(xmltype) from this sql so that it is flattened into a relational type view?
select *
from ( select owner, count(*) as owner_segment_count
from dba_segments
where owner in( 'OLAPSYS','ORDSYS','QDATA','SYS','SYSMAN','SYSTEM','XDB' )
group by owner )
pivot xml( sum( owner_segment_count ) as owner_segment_count for owner in( any ) )
CM: removed unescessary formatting. Personally I find size 1 hard on the eyes. Also added [code] tags,